Add the value of table row selected PageFlowScope so that I can access taskflow

Similar Questions

• Passing the values in a row selected on a table to a region

  A jspx, I have a table that is connected to a VO. It has an attribute "Ndc" gives the word.
  
  In addition, on the page, I have a region that contains a bounded workflow that has only a single fragment.
  
  I have a text in this fragment input, which should show the value of "Ndc", according to which line is selected on the table in the parent page.
  
  I use this fragment in other pages, and I am able to get the value of "Ndc" to an input parameter, I put in place for the stubborn workflow.
  
  But when I try to pass a value that matches my attribute "Ndc" in my table, I get either an error, or nothing is displayed.
  
  Should what value I be sending to the stubborn workflow? And once I get it to work, it will be as simple as putting a partial trigger on my area (showing my table) in order to get the region to refresh with the value "Ndc" selected?
  
  Thank you
  
  Joel
  
  Edit: So much worse, I didn't have a link put in place for my NDC attribute on my parent page. Once I did this and sent as parameter for the stubborn workflow, it worked.
  
  Published by: JRolls on November 15, 2010 08:42

  Hello

  What is the expression defined for the input in the pageDef parameter?

  In addition, you need to set a RefreshCondition on the task-flow-binding, I don't think that the only partialTriggers will be sufficient.

  Kind regards

  ~ Simon

• To add the values in table of correspondence of IOM in reports

  Hello
  We have a requirement that we include the search values in the report. The condition is as follows:
  1. need to include the location of users in an existing report.
  2. the need to include the description of the location in the report. In our IDM, location of users are numbers as 0001, 0025, and these numbers are mapped to the decsription location in the table of research like this: Code-0001, decode-California, Code-0025, decode and Florida. We need display the location of the users as well as the description of the location in the same report codes.
  
  The report should look like this
  First name, name, location, description of the location
  ABC XYZ 0001 California
  
  
  If someone has implemented this type of scenario, so please let me know.
  
  
  Kind regards
  Kalpana.

  Select usr.usr_first_name, lku.lku_key, lkv.lkv_encoded, lkv.lkv_decoded in hglN hglN, lkv-lkv, usr usr
  where lku.lku_type_string_key = '. '
  and lku.lku_key = lkv.lku_key
  and usr. USR_UDF_ = lkv.lkv_encoded

• Is it possible to add the Win7 Home Premium 'Administrator' user account so that it can be selected during normal connection? I want to be able to log-in as Administrator without going the route of the F8, as in XP.

  I need to be able to log in as 'Administrator' to the normal screen log-in, ranging from the road to F8 vice. I can find no option for this, not even NET USER to the CMD window. If it is possible, perhaps via a registry change, I sure would appreciate the info. Thank you

  OK, I will be more detailed:
  1. create an administrator account.
  2 log in under this account.
  3. click on start.
  4. type the three letters cmd in the search box.
  5. press on Ctrl + Shift + Enter
  6. click on "run as Administrator".
  7. type the following command:
  NET user administrator /active: ye

• Obligation to fill the values in table advanced according to the selection of a value in another article of lov (not in the advanced table)

  Hi all

  We work in a custom oaf page subdivision. We have an obligation to fill the values in table advanced based on a value selection in an element of the lov (this LOV is not in the advanced table) .can share you it please me steps or examples of code to achieve this. Waiting for response.

  Kind regards

  I do not understand completely still. What do you mean by "default in the table values must be inserted".

  You can create a dummy VO with the same columns and fix the VO in the advanced table.

  In the normal scenario, when the user clicks on submit button, browse this VO, and copy the values to the validation according to VO and appeal EO. If values gets inserted into the database.

  When the user selects the number of PO, simply run the other VO and fill this dummy VO so that values are available in the advanced table. When you click on send, do not copy these values to the EO based VO, so these lines won't get inserted.

  It work?

  See you soon

  AJ

• sum of the values in a row

  Hello
  
  I have a table table1 with the columns a, b, c and d
  
  I get some results this table using this query:
  
  SELECT
  a,
  b,
  sum (case when c = 'F' then '1' other '0' end) 'c_data. "
  sum (case when d = s 'then ' 1' other end '0') "d_data".
  Of
  Table1:
  WHERE
  a = 'a value '.
  GROUP BY
  b
  
  My result will be like this:
  a d_data of c_data to b
  ABCD efg 1 1
  Fund fjd 1 0
  DFD fd 0 0
  
  Now I need a 5th column, which should look like this: -.
  a b c_data d_data Total
  ABCD efg 1 1 2
  Fund 1 0 1 fjd
  DFD fd 0 0 0
  
  Please someone change and give me the above query?

  Double wire.
  sum of the values in a row

  Please close.

• Add the value of point two apex and display the result in another part of the apex

  Hello
  
  I need to make the addition of the two item values using apex.item.text and find the result in another apex.item.text.
  
  For example:
  

  SELECT
  apex_item. Text(1,null) ONE
  apex_item. Text(2,null) TWO
  apex_item. Text(3,null) RESULT
  FROM EMP

  please suggest me
  
  Thank you
  Sudhir

  >
  No it does not add the two values in the column, user key to enter the value, it must add the value of the item and displays the result in a dynamic way. Need a suggestion for using javascript
  >
  This requirement was not not clear in the op.

  See the demo of Denes Kubicek.

  This topic is discussed far too often. Have you tried to Oracle Application Express (APEX) and adapting one of the many examples of LoV cascading to your situation?

  See you soon,.

  PS: Tip:
  Look for the p_item_id and p_attributes of the APEX_ITEM API parameters.
  You can call JS functions for example using p_attribute

  APEX_ITEM.TEXT(...
  p_attributes => 'onchange="doTotal(this);"', /* doTotal being your JS Function */
  ...
  

  Published by: Dominic August 16, 2012 11:52

• Can we restrict the number of table rows to display on a page that is only 2 or 3 rows appear? How to do this?

  Mr President.

  Can we restrict the number of table rows to display on a page that is only 2 or 3 rows appear? How to do this?

  Concerning

  Tender,

  Set the RangeSize property on the table.

  See you soon

  AJ

• How to get the value in LIB in selection of LOV

  I have the designer generated form. Most of the logic is processed in Library.I do something about validation in £ QMS under Event_name = "key_commit." I have a LOV having the value 1. 2 current. unknown 3. recorded and coresponding parameter system CU, United Nations, RE respectively that return the value in the form field. Now, in the validation, I have to check if the status is 'current' and end_date don't thats not null then we should not allow to save the file and send the message. Keep in mind that I do in the library only if you guys tell me how I will get the value of LOV being selected and get it in / or provide library to comapare against the value of the system setting that is in the database
  -Check if there is an end date, but the status is still defined as 'current '.
  IF NAME_IN('RCBADG.) END_DATE ') IS NOT NULL THEN
  -Do the system_parameter_identifier for the entry labeled as "CURR.
  - AND the user set the value of the parameter (code for 'Current')
  Select parameter_value
  in v_par_value
  of system_parameters
  where cspara_identifier =(select identifier)
  of coded_system_parameters
  where code = 'CURR');
  -Get the identifier of status register coded for "CURR.
  Begin
  Select the identifier
  in v_crsta_id
  of coded_register_statuses
  where code = substr (v_par_value, 1, 4);
  EXCEPTION
  When no_data_found then
  v_crsta_id: = null;
  End;
  
  -Check if the status of "Current" is defined
  IF v_crsta_id = v_crsta_id1 then
  -v_crsta_id1 is drive where the value must be equal to system param 'CU' LOV selection
  QMS$ SHOW_MESSAGE('SSL-15008','E',TRUE);
  RAISE FORM_TRIGGER_FAILURE;
  ON THE OTHER
  null;
  END IF;
  END IF;

  I can only imagine that I have no idea what makes your library in detail.

  The event that you would get would be the WHEN-VALIDATE-RECORD (at least that's the trigger I would implement the logic).

  With respect to the verification of the value and the end date. I guess the Lov will return the value selected in some element in the block, then the comparison would be something like

  IF NAME_IN('RCBADG.END_DATE') IS NOT NULL THEN
    IF NAME_IN('RCBADG.THE_ITEM_WHERE_THE_LOV_VALUE_IS_TRANSFERED_TO')='CU' THEN
      -- Show some error here
      ERRoR
      RAISE FORM_TRIGGER_FAILURE;
    END IF;
  END IF;
  

• I designed my social media buttons. How can I add the link to each of them. For example: How can I add my Facebook link to my button on my muse site face book?

  I designed my social media buttons. How can I add the link to each of them. For example: How can I add my Facebook link to my facebook on my site of muse button?

  Hello

  Please select the button that you created and go to the hyperlink tab, and add the URL of the facebook page here.

  Please take a look at the screenshot below.

  

  Concerning

  Vivek

• 14 Photoshop. I'm trying to merge (do a panorama) 2 photos.  The 'automation tools are grayed out', which means that I can not select this option.

  I just upgraded from photoshop 10 to 14. I'm trying to merge (do a panorama) 2 photos.  It was very fast and easy in Photoshop 10.  In photoshop 14 the 'automation tools are grayed out', which means that I can not select this option.  I do something wrong or my installation does not work?

  In the 14 PES Editor, adobe has moved the Photomerge features to guided.

  Photoshop elements help | What's new in Photoshop elements 14

  Photoshop elements help | Guided - mode Photomerge edits

• I am trying to record my Photoshop elements 8 product so that I can access my serial number.  Yet, when I go to the registry, the 'Record' Option is greyed out and I can't select.  All other options in the menu are available to be

  I am trying to record my Photoshop elements 8 product so that I can access my serial number.  Yet, when I go to the registry, the 'Record' Option is greyed out and I can't select.  All other menu options are available for selection.  I have a PC.

  He was already registered?  If so, how can the computers?

• Cannot install iTunes. Get the error, "this installation package cannot be opened. Verify that the package exists and that you can access.

  I can't download itunes on my computer its gives me an error saying "this installation package cannot be opened. "Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package" can anyone help

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  Uninstall software, remove programs and solve uninstalling problems
  http://www.revouninstaller.com/

  Remove and reinstall iTunes, QuickTime, and other software components for Windows XP
  http://support.Apple.com/kb/ht1925

  Hello questions, see if that helps: http://www.raymond.cc/blog/archives/2008/02/10/how-to-uninstall-or-remove-bonjour-mdnsresponderexe/

  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/HT1926

  Turn on Windows 7 'Compatibility Mode' to iTunes:
  http://www.PCWorld.com/article/188534/turn_off_windows_7_compatibility_mode_for_itunes.html

  Windows reports that iTunesSetup.exe is not a valid Win32 program
  http://support.Apple.com/kb/TS1406

  First of all check if you have a version of 32 or 64-bit Windows:
  1) click the Start button, right-click computer and then click Properties.
  (2) in the system, see the system type - it will say either 32 or 64 bits.
  (3) download the appropriate version using the links.

  ITunes download (32-bit):
  http://www.Apple.com/iTunes/download/

  Download 64 - bit:
  http://support.Apple.com/kb/DL1037

  Make sure that the "Windows Installer" service is running, or force start to begin.

  (1) open run, and type services.msc, and then press ENTER. You can also go
  Control Panel/Admin Tools/Services.

  (2) locate the Windows Installer in the list of installed services.

  (3) check that the status is "started".
  If the condition column is empty, right-click Windows Installer, and then select start.

  (4) If you get the error trying to force start the Windows Installer service,
  and then change the Startup Type to automatic (the default value is 'Manual').
  and then restart the computer.

  (5) very Installation Service runs after you restart the system.

  Also:
  Forum of Apple's Itunes: you can find a solution (if none of the above is of no help) to your problem when you post on their forum.

  http://discussions.Apple.com/category.jspa?categoryID=150

  J W Stuart: http://www.pagestart.com

• I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the doc

  I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the document (replacing the existing document) and close. Then another person can open the same document digitally sign another area of the form, save it, and close it. So on, and so on. Is there a way to do this? At the end of the day, I would end up with a PDF file with literally hundreds of signatures to enable different ACC everywhere...

  I don't understand what the problem is. In the post of the davidr96549424 on May 8, 2015 07:58 you presented a structure of a correct document. Is the issue of the creation of this structure in a PDF file? For this, you will need an Acrobat, not reader.

  XI in Acrobat, select Tools-> forms-Edit. Click 'No' on the form fields 'detect '. In the tasks Panel that opens, click on "add new field". Select "Digital Signature" and move it to the location in the document where you want to than the appearance of the signature to be. Repeat that for signature fields as you want. Users will sign by clicking on the prepared unsigned signature field which shows the dialog box "sign. Do not forget that as TSN has noted that a digital signature applies to the entire document. The entry in the document where it is is irrelevant. Each next signature covers all previous signatures.

  Your users can also sign a document from anywhere that they want without signature fields already prepared. For this select fill & sign-> work with certificates and the type of signing you want to sign up with. A dialog box that will tell you a rectangle for the appearance of signature rises and after you draw the rectangle of the dialog 'Sign' rises.

  PDF/Acrobat doesn't have a limit on a number of signatures in a PDF document. But! Don't forget that when you open a PDF file with Acrobat/Reader signatures valid all of them and takes time (several seconds - until 10 - for every signature), so if you have several signatures of dozens of their validation open can take a long time.

  I don't know how build you your workflow so that each person signs the same PDF and saves it. Economy runs on the same computer where the PDF is stored. You'll have to decide how to allow different people to have access to the same PDF. They, of course, you may sign this only one-at-a-time PDF.

• You want to upgrade Windows Vista to Windows 7 Professional. I ran the Windows Upgrade Advisor, and he told me that I can upgrade to Windows 7 Home Premium and Ultimate. Why not professional?

  I want to install Windows 7 Professional.  I ran the Windows Upgrade Advisor, and he told me that I can upgrade to Windows 7 Home Premium and Ultimate. Why not professional? Or is this correct?

  You can still install Windows 7 Pro, but it requires a custom installation. This will remove all your programs (you will need to reinstall them), but you can save your files and settings to external storage before doing so.

  If you want to make a place in the upgrade you will need Home Premium or Ultimate.

  How to install Windows 7:

  If you have Vista:

  Update: http://windows.microsoft.com/en-us/windows7/help/upgrading-from-windows-vista-to-windows-7

  Custom installation: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-vista-to-windows-7-custom

  What Upgrade Options are available for Windows 7?
  If you are running Windows Vista , in some cases you can proceed directly to Windows 7, and in other cases, you must perform a custom installation. The following table shows what editions of Windows Vista can be upgraded to Windows 7.

  Windows Vista Home Basic	Windows 7 Home Premium, Windows 7 Ultimate
  Windows Vista Edition Home Premium	Windows 7 Home Premium, Windows 7 Ultimate
  Windows Vista Business	Windows 7 Professional, Windows 7 Ultimate
  Windows Vista Ultimate Edition	Windows 7 Ultimate

  For more information, see upgrading from Windows Vista to Windows 7 . (http://windows.microsoft.com/upgrade-windows-vista )
  You can't go from 32 bit to 64 bit, a clean install is required. If you have any questions about the upgrade from 32 bit to 64 bit or vice versa, please see this FAQ: http://windows.microsoft.com/en-us/windows7/32-bit-and-64-bit-Windows-frequently-asked-questions
  If you have any general questions about reinstalling Windows , please see this site:
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows