Add vm newly created in the domain

Similar Questions

• Cannot access records two newly created on the USB.

  * Original title: Chaos Pendrive

  My USB got two shortcuts (with the files icon): "found.000" and "recycled".

  All records are now shortcuts (for cmd or anything in system32).
  I have no data (excluding files that were not in all cases).
  I can't get into folders, which is obviosly (records are now shortcuts).
  It's my size of USB as before the accident.
  What should do?

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, it seems that you can not access both files newly created in your USB key.

  This issue could be due to a spyware infection. I propose to run online scan and check if it helps.

  Connect the USB stick to the USB port and scan it using the Microsoft Safety Scanner and perform the analysis complete on your computer.

  Online scanner.

  A quick way to search for viruses is to use an online, such as the Microsoft Safety Scanner scanner. The scanner is a free online service that helps you identify and remove viruses, clean your hard drive and generally to improve the performance of your computer.

  To run the Microsoft Safety Scanner:

  a. go to the page Web of the Microsoft Safety Scanner Download scan.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  b. click on Download nowand then follow the instructions on the screen.

  Important: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please post back with the State of the question, so that we can help you further.

• Users cannot see folder newly created in the OBI answers

  Hello

  By default, after clicking on catalog users see two folders: my files and folders shared.

  I want to create a third - "new folder."

  So I logged as administrator, went to catalog, then Admin View, then I created my new file just under the root of the catalog gave its permissions (did the same permissions as shared folders). But when I'm chaning to the user that I do not see this new folder.

  I also want to add that when I created a new folder under 'Shared files' or 'My files', the user can see normally. Simply, they do not see the folder under the root of the catalog.

  Any ideas?

  Users can use a folder directly under \root... so you need to create these files in \root\shared

• 404 error on the newly created on the local Sites WebCenter site install

  Hi all

  I installed WebCenter sites in a local environment, and I tried to create a new site (newsite) following the guide below:

  http://www.sciabarra.com/FatWire/2015/10/26/webcentersites-12C-create-a-site-with-the-new-MVC/

  
  

  of more the creation of a webroot for the new site (/ newsite).
  

  
  

  Now I can see my site within the administration console and I can view pages created.

  The problem is when I try to access my site from outside, I get a 404 error.
  

  
  

  Are there additional measures to make the visible site?

  I can access properly at http://localhost:6003 / samples/home/sites, http://localhost:6003/sites/avi/home.html, but cannot access http://localhost:6003/sites/newsite/home.html

  
  

  Could you please help me on this?

  
  

  Thank you

  Giulio
  
  

  Hi, Giulio.

  Looks like you have a question similar to that described in the document following km:

  -Web references not working for the new Site (Doc ID 1968290.1)

  However, Sites 12.2.1, instead of update the Web.XML to include extra prefixes for the parameter the URLRewriteFilter SitePrefix, I think you should update the property site.prefix to the WebCenter Sites (by default, it includes the prefixes fsii, avi, samples.

  You should be able to do this via the property management tool.  A reboot may be necessary.

  Let me know if this solves the problem for you.

  Thank you
  Paul

• How to associate the data store of the target for the newly created using the API Interface

  How to create a new Interface under project, need to associate the data store target for mappings for the interface by using APIs "."
  
  Able to get the associated interface created temporary data store. You need to associate a new database model. How to do this using the API
  
  My code is,
  
  String pCode = "DEVELOPMENT";
  Context OdiContext = (mgr.getFinder (OdiContext.class)) .findByCode (pCode) (IOdiContextFinder);
  System.out.println (Context.getLastDate ());
  
  OdiInterface pInterface = new OdiInterface ("toDeleted_Interface", pFolder, context);
  pFolder.addInterface (pInterface);
  
  The list of ds < DataSet > = pInterface.getDataSets ();
  < DataSet > iterator itr = ds.iterator ();
  DataSet ds_nxt = itr.next ();
  
  PAlias string = "HRA_TMPL_DEFNS_TL";
  pOrder int = 0;
  OdiModel pModel = (mgr.getFinder (OdiModel.class)) .findByCode ("FILE_PM_MODEL") (IOdiModelFinder);
  String pName = "HRA_TMPL_DEFNS_TL";
  OdiDataStore pUnderlyingOdiDataStore = new OdiDataStore (pModel, pName);
  SourceDataStore pSourceDataStore = new SourceDataStore (ds_nxt, false, pAlias, pOrder, pUnderlyingOdiDataStore);
  ds_nxt.addSourceDataStore (pSourceDataStore);
  
  TargetDataStore tdata = pInterface.getTargetDataStore ();
  
  If (tdata.isTemporaryDataStore ())
  {
  }

  http://odiexperts.com/creating-interface-for-single-source-and-target/
  http://odiexperts.com/creating-temporary-interface-using-ODI-SDK/

• Give permission to the domain users to replace the file in the folder created by domain admin

  We have a domain controller in our network. also we have the domain users and domain administrator. We create a batch file that copies a file to the folder by using a script to the server policy when users open a session input/output. However if the admin area access system cant use overwrite file in the folder. We want to give permission to the domain users to replace the file in the folder created by the domain administrator.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro, w8itpro, windowsvistaitpro, windowsxpitpro, windowsintune

  Hope the information is useful.

• The sum of several waveforms, created inside the loop for

  Hello

  I am currently viewing the Gibbs phenomenon by adding several sine waves. The issue I'm having is that I can't understand how to add sine waves created in the loop. I have attached a picture of the basic structure for my project below. I tried to use simply "add" with a feedback loop, but it seems that my programming skills apply here. Any suggestion is appreciated. Thank you!

  0

  Something like that?

  1. make sure that you "reset" the generation of signals with each iteration

  2. with the waveforms, please make sure that the sample rate is the same.  This may be a problem with the first iteration.  Then add in a check to use only the first waveform on the first iteration.

  

• How to view a newly created line only in adf table?

  Hi all

  JDEV 12.1.3.0

  When you drag move a VO on a page as a table of adf, it displays all the lines available in the whole of lines. I want to display only the rows that are newly created in the user interface.

  I achieved this goal by creating a transient "RowStatus" attribute, which will be the State of the entity (0-1 new, unmodified, 2 - modified) and I filtered the table using this status of line by double clicking on the VO and specified a filtered attribute and the value. But the performance is very poor, because I think it makes even all records and only newly created filter lines.

  Is there another way optimized to achieve?

  How to achieve this programmatically?

  If I run VO.executeEmptyRowSet () when the page loads, the table is rendered empty at first, but after call CreateInsert operation, all rows are returned with this new line.

  You see the same behavior if you create lines programmatically (with: vo.createRow (); vo.insertRow (row)) instead of CreateInsert?

  If it does not then only "programmatic" option is probably to set where clause 1 = 2

  Dario

• Rookie here: I can't update the DNS where stands the domain name...

  Because of the e-mail the customer had set up with the domain provider and email that I have been informed that I cannot update the DNS without messing up the email. So I was in touch with them and they asked me for a registration number A, which they will add and it "will point" the domain name to Business Catalyst where the site is hosted.

  This all sounds great other that I don't know where to obtain registration from the site... I don't see where the ADD A Records... What I'm missing! Help, please

  

  Please follow these steps:

  -Remove the added domain

  -Add the domain as external

  -Use a record according to the location of the server:

  • Europe

    54.246.209.120 or
    54.246.209.119 or
    54.246.209.93

  • United States

    54.236.190.114 or
    54.236.189.64 or
    54.236.189.61

  • Australia

  • 54.252.148.183 or
    54.252.148.191 or
    54.252.148.134

  Thank you

  Sanjit

• View composer quick Prep join the domain

  I use view creating cloned VMs related and fast to join the virtual machines to the domain.

  Virtual machines are created and the reconfiguration of the virtual machine is completed successfully, the computer accounts VM added in the field but when I try to connect to a computer virtual that they are not part of the domain?

  I rebooted the virtual machines to ensure that it was not that and yet, I do not get a domain login prompt?

  Thank you

  P

  pdarcysgi wrote:

  Test again today and I have checked that the virtual machine used to clone took the INVESTIGATION period out of the machine before I stopped him, but still getting the same problem. I also disabled the XP firewall (this shouldn't cause a problem) and I still have the same problem. The virtual machines created, accounts created in the domain, but the machine is still in a working group. ??

  It may be a stupid question, but you have not explicitly stated this: is the snapshot of parent for virtual machines already joined to the domain? It is a difference that often gets overlooked for linked clone pools during their implementation for the first time. For more details, please see the Guide to Administration of View Manager 3.1.

• After going instant return, get Windows cannot connect to the domain

  I created a team with a domain controller, a box of SQL and a front-end server. I also took a few shots on the front-end and sql. The problem is when I go back to a snapshot and if I logout or restart the server on the sql or the frondend, do not touch the domain controller, when I try to log into the server, I get the follow-up:

  "Unable to connect ot the domain, either because the domain controller is down or otherwise, unavalible, your computer account was not found... »

  I can unjoint and join the server and the problem by far, but there is another difficulty.

  Thank you.

  Vincent

  llvc wrote:

  I have sever the domain server and join and it works, but it is a pain that have to do whenever I come back to a snapshot. Is there a way I can update the new secure channel password?

  When you join a system to a domain, a computer account is created in the domain of the system.  Your server automatically changes the password for this account of computer at set intervals.  What happens is that after you've taken your snapshot your guest has changed his password for the machine account.  Then when go back you to your snapshot your guest tent to use the old password.

  To work around this problem, before you take the mark of the snapshot next registry change that turns off the changes of automatic password for the computer account on the domain:

  http://support.Microsoft.com/kb/154501

• I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  Hello

  I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  "You cannot connect because the logon method, you use is not allowed on this computer, please, see your ad min for more information network"

  Please help me with that and I don't want to give permission to admin for all users group...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Unable to create the domain... Help, please

  I have a Machine of 8.1 Win. I installed vmware workstation 10 on it and then installed win Server 2012 and win 7 ultimate on the vmware as an operating system guest. I have configured the AD DS on Win Server services and promoted as a domain controller. Now, I try to add the virtual OS win 7 the domain newly created, but its unable to connect. I'm sure it's something with the network cards, but I am unable to understand. Help, please.

  Since you give no details, it is almost impossible to help.

  Difficult to draw exactly the same as if it was the hardware. You have configured before hardware systems:

  A few typical errors:

  Server and client on different subnets? (use the ipconfig command to test). Use of the static IP addresses to eliminate conflicts of DHCP server.

  Role of server DNS not installed or not configured correctly on the server?

  IP address of the server that is not configured as a primary DNS server on the client? Tried to put the name and the IP Address of the server in the customer hosts file?

  you try to join the domain with the domain the incomplete domain server's FULL name?

  Maybe you have some reading to do in VMWare network documentation or the MS Server documentation?

  Lou

• Windows Mail. Cannot add the domain of the sender to the blocked sender list

  Mails are received without a good 'from' address.  They now have the shape of the House of garbage.  NOTES not real names.

  I inadvisedly signed up for something the House of garbage and other offers from partner sites.  House of garbage and partner sites all start sending me waste in large quantities.  They all had one thing in common - all spam emails came rubbishionmx.com.    I had managed to block this domain by adding it to the blocked senders list.

  Now I get these emails again in my Inbox.  Any attempt to add the domain to blocked senders list fails. Probably due to no dΘcodeur address.

  What should I do now?

  You are welcome. Are you speaking of the only rule address book? Depending on the type of legitimate mail you get, some like it and some do not.

  Start with the only rule of AddressBook and you receive a message that you want people not in your address book (E-mail from companies, bills, your ISP, etc), you can add them to the rule.

  Tools | Message rules | Mail | New.

  Box 1 - Where the From line contains people {check it out}

  Box 2 - Check: delete it & stop processing more rules if you want messages not in the address book to go to deleted items, or you can create a spam folder and direct them here.

  You can choose to delete the server, but be careful because you never have messages downloaded to any folder, if you choose this option.

  Box 3 - Click on the blue words contains people

  Click on the first address to select it. Scroll to the end and hold down the SHIFT key while you click the last address. This will highlight all. Right-click on it and click on from the menu that appears.

  Now, click Options and choose: Message * contains no of * the people below in the top of the page Options area, then choose: Message corresponds to one of the people below in the background Options box.

  OK your way out of the new rule.

  Now, only the addresses that you entered will be uploaded to your Inbox. You won't see other emails.

  Remember, if you add a person to your address book, you must add to the rule. It will not automatically be added.

• Script to join the domain, the role of configuration, add permissions and activate/SNMP configuration

  So I'm writing a script to install our vSphere hosts to work with our monitoring software.  Right now, it's all done by hand and I would like if possible to automate it.  So far, I came up with this.  I get to step 5 and that's where it fails.  I can get it manually run the Get-VIAccount command, but in the script, it fails.

  These are my steps

  1. connect to an existing host and retrieve role properties.

  2. connect to the new host

  3 join the domain.

  4. disconnect the new host and reconnect with the credentials of domain

  5. get the domain account, role of research/create and add permissions to host

  6. enable and configure SNMP

  7 restart MGMT officers.

  #Variables

  $vmhost = "Host03".

  $domaintojoin = "Domaine.org".

  $domainAlias = "domain".

  # $usernametograntpermissions = "service.account".

  $rolename = 'team - account control service '.

  #Connect to host17 to retrieve the role privileges

  to connect-viserver host17

  #Extract of privileges for the role of vcenter Monitoring Service

  $privsforrole = get-viprivilege-role (get-ferrule-name $rolename)

  Server VI #disconnect

  disconnect-viserver *-confirm: $false

  VSphere hosts #Connect above (enter the credentials of the root when prompted)

  SE connect-viserver-Server host03

  #Join field

  Get-vmhostauthentication - VMhost ctcvsphere3 | Game-VMHostAuthentication-domain $domaintojoin - user %-% - JoinDomain-confirm password password: $false

  credentials of the #disconnect root

  disconnect-viserver *-confirm: $false

  #reconnect with the credentials of domain

  SE connect-viserver-Server ctcvsphere3-user username-password password % domain\username

  #Get domain account and add to the host

  $viAccount = get-VIAccount-DOMAIN-User - ID service.account

  # Get the role

  $viRole = get-ferrule-name $roleName

  If (-not $viRole) {}

  throw the "Role of the creation.

  New-ferrule-name $rolename - Server $vmhost

  Together-ferrule-role (Get-ferrule-name $rolename - Server $vmhost) - AddPrivilege (get-VIPrivilege-id $privsforrole - Server $vmhost)

  }

  # Add permissions on VMHost

  New-VIPermission-Director $viAccount-role $viRole - entity $vmHost

  all VIServers #disconnect

  Disconnect-VIServer *-confirm: $false

  }

  #Configure SNMP

  Get-vmhostsnmp | set-vmhostsnmp-enabled: $true

  Get-vmhostsnmp | game-vmhostsnmp - ReadOnlyCommunity 'SNMP.

  #Restart Mgmt officers

  Get-VMHostService - VMHost $vmhost | where {$_.} Key - eq "vpxa"} | Restart-VMHostService - Confirm: $falese - ErrorAction SilentlyContinue

  Here is my error:

  Get-VIAccount: 27/02/2014-16:03:11 VIAccount Get A general system

  rror occurred: access to the directory error

  C:\ps1\vmware\snmp1.ps1:42 char: 28

  + $viAccount = get-VIAccount < < < < - domain - User - ID SERVICE. ACCOUNT

  + CategoryInfo: NotSpecified: (:)) [Get-VIAccount], SystemError)

  + FullyQualifiedErrorId: Client20_VmHostServiceImpl_RetrieveUserGroups_Vi

  Error, VMware.VimAutomation.ViCore.cmdlets.Commands.PermissionManagement.GE

  tVIAccount

  Get-VIAccount: 27/02/2014-16:03:11 Get - VIAccount VIAccount with the id

  "service.account" was not found using the specified filters.

  C:\ps1\vmware\snmp1.ps1:42 char: 28

  + $viAccount = get-VIAccount < < < < - domain - User - ID SERVICE. ACCOUNT

  + CategoryInfo: ObjectNotFound: (:)) [Get-VIAccount], VimExceptio)

  n

  + FullyQualifiedErrorId: Core_OutputHelper_WriteNotFoundError, VMware.VimA

  utomation.ViCore.Cmdlets.Commands.PermissionManagement.GetVIAccount

  New-VIPermission: Impossible to validate the argument on the parameter "principal." The argument

  ent is null or empty. Provide an argument that is not null or empty, and then try

  the command again.

  C:\ps1\vmware\snmp1.ps1:56 tank: 40

  + New-VIPermission-main < < < < $viAccount - $viRole - entity role

  y $vmHost

  + CategoryInfo: InvalidData: (:)) [new VIPermission], ParameterBi)

  ndingValidationException

  + FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutom

  ation.ViCore.Cmdlets.Commands.PermissionManagement.NewVIPermission

  The term 'catch' is not recognized as a cmdlet, function, script fi

  the, or an executable program. Check the spelling of the name, or if a path has been included

  DED, make sure the path is correct, and then try again.

  C:\ps1\vmware\snmp1.ps1:57 tank: 12

  + captures < < < < {}

  + CategoryInfo: ObjectNotFound: (catch: String) [], CommandNotFou

  ndException

  + FullyQualifiedErrorId: CommandNotFoundException

  Thanks in advance!

  Dimitar did a nice write-up of this phenomenon and a possible solution.

  See ESXi hosts to join a domain and licensing with PowerCLI