Added to my list of network servers

Similar Questions

• 192.168.1.1 is removed from the list of DNS servers

  I have a Linksys E3000 and I see the gateway (192.168.1.1) in my DNS server address.

  1. why this figure here in the DNS?

  2. how to remove from my DNS servers or stop the router insert it into my list of DNS servers?

  Tchard wrote:

  I have a Linksys E3000 and I see the gateway (192.168.1.1) in my DNS server address.

  1. why this figure here in the DNS?

  2. how to remove from my DNS servers or stop the router insert it into my list of DNS servers?

  I have an EA3500 with the latest firmware and there is a problem that HE never used "CPCI DNS" parameters through the router UI even if your connected devices shows these DNS addresses under 'ipconfig/all '.

  If you set manually the DNS settings of the card interface NETWORK (using Google or other DNS servers), then you will see that the gateway or default router address is not liseted in your list of DNS servers.

• Why the Personal Hotspot from my mobile phone appears in my list of list wifi networks if it is disabled on my phone?

  Why the Personal Hotspot from my mobile phone appears in my list of list wifi networks if it is disabled on my phone?

  On my iMac, there is an icon for a list of available to join Wifi networks.

  One of these Wifi networks is my iPhone Personal Hotspot.

  However when I look at my setup on my iPhone Personal Hotspot is off.

  I tried to join the Hotspot to my iMac and put.

  This is part of a feature called Hotspot instantly. It allows you to connect to your personal hotspot without your password or activate the hotspot on your phone. Don't worry, this does not allow other people to access your hotspot, only devices using the same identifier Apple will see your hotspot. This feature is not using any extra battery life when you're not connected to it. You can learn more about instant Hotspot here: OS X Yosemite: connect to the Internet using instant Hotspot

• Why other computers have suddenly disappeared from my list of network?

  I don't am not aware of any changes made to my computer, although the automatic updates are enabled, but suddenly all the other computers on my network disappeared and my computer as appears well is no longer on the other computers.

  Hi Tobin,

  It can be disappointing when the computers suddenly disappear from the list of networks. I understand the inconvenience.

  (1) what version of operating Windows is installed on the computer?

  (2) did you of recent changes to the computer before the show?

  (3) is your computer connected to the home network?

  I suggest the steps mentioned in the article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/why-are-computers-missing-from-the-network-map

  Note: The article above applies for the Windows 7 operating system.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

   

• my list of network services is turned off and it won't turn

  my list of network services is turned off and it won't turn

  do you mean;

  the list of devices on your network?

  in network and sharing Center, Center

  advanced sharing settings

  turn on network discovery

  then try a reboot... see if this leads him to the top.

• Replace/upgrade my router after purchase/adding a 'Smart' to my network TV and now have a noise to connect/disconnect running in background.

  Original title: connect/disconnect sounds in the background

  I had to replace/upgrade to update my wifi router after purchase/adding a 'Smart' to my network TV and now have a noise to connect/disconnect running in the background, on something, every few minutes.  It does not affect the operation of my computer, but it is very annoying. Cut the old router market and connect and disconnect before replacement, but did not any noise so I don't think it is related to that.  I can't find any evidence of the old router on the computer anyway.  I hope you can help me!

  Hi Danielle65,

  You can try the following steps and check if it helps.

  Method 1:

  You can also perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  Method 2:

  You can also check in Event Viewer about what is causing the problem. Alternatively, you can publish the results, so that we can help you solve the problem.

  Open event viewer

  What are the information contained in the logs of the event (Event Viewer)

• I tried to turn on the list of network services both through the link in the Network Center and sharing, as well as in the microsoft management console, but it does not work. In the second, I get the message that began, he was arrested.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Check the default services for your version of Windows and the dependencies of services according to the needs here:

  Blackviper
  http://www.blackviper.com/

  List of network for Vista Service (there are other OS) check the dependent services and their dependencies.
  http://www.blackviper.com/WinVista/services/Network_List_Service.htm

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to make a music CD is inserted, added to the list of Windows Media Player library?

  Windows media player

  How to make a music CD is inserted added to my list of Media Player library? No installation of 'Add' seems to be available.

  How to make a music CD is inserted added to my list of Media Player library? No installation of 'Add' seems to be available.

  It is called 'rip '.

  Insert the CD > when Windows Media Player starts to play, click on Rip to the toolbar > music CD menu appears > check mark to one you want > bottom right, click Start Rip

  Once completed, check another > click Rip > and so on... For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• 1053 error list Service network

  Hello

  When I start Windows Vista Home Basic Service Pack 2, it seems to me that I am not connected to any network (red X on the network icon in the notification area of the taskbar). After further investigation, I found that the list of Network Service does not work. Each attempt to start this service fails with error code 1053. Is that what I can do to remedy this situation?

  Brandon Taylor

  Brandon Taylor

  Here is a Microsoft Article on this particular error as it applies to the start services:http://support.microsoft.com/kb/839174.  Maybe this will help.

  Also, go to start / Control Panel / administrative tools / event handler and find the error in the list (probably the system section) and click on it for more details and after these details here to see if they help us to find the cause. Here's how to use Event Viewer: http://www.petri.co.il/vista-event-viewer.htm.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to avoid the visual studio project to be added to the list of recent but still get solutions

  When adding projects to a solution in visual studio, the project also gets added recent projects and Solutions list

  How ever I never open the project in the recent list so, indeed, it's cluttering up the list of these latest solutions so I would avoid getting projects added to the list of these last, but couldn't find a way to do

  Edit:

  Proposed by question to:

  https://social.msdn.Microsoft.com/forums/en-us/3bb8a2d5-c1ab-4b12-B0E9-5ceb1f317a3f/how-to-avoid-Visual-Studio-project-to-be-Adde-to-recent-list-but-still-get-solutions?Forum=VSSetup

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Any idea when GTX 970 will be added to the list in charge in the most recent version of first? ID like my cuda.

  Any idea when GTX 970 will be added to the list in charge in the most recent version of first? ID like my cuda.

  Should work now... for CS5 or 6 there was a hack http://forums.adobe.com/thread/629557

  For later versions, my understanding is that as long as the card has at least 1Gig vram you need, you can use Cuda

• new set of camera with v4 profiles added to the list of options in camera of calibration

  Hello!

  I'm shooting with a Nikon D300s and I was using 8 elements and Camera Raw 5.5 (included in item 8) to process my photos for two years now. Since today, when in Camera raw, I now see a new set of camera with v4 profiles added to the list options in camera of calibration. As for example "camera D2X Mode 1 v4, v4 of landscape of the camera, camera neutral v4 etc...) From whence they came (they weren't there the last time about 2 days ago, I opened elements) and how are they different? They just increase the list and disturb my work flow.

  Is there a setting that has been changed? But I do not remember making any change. It me indeed puzzle.

  Thanks for the help

  These would have been added by an update to plug in Camera Raw. Each is an alternate interpretation of the raw data. We get these profiles of the manufacturer, then it means that put Nikon to update their profiles and we distribute them. Probably, you wouldn't be able to seems not much difference between the older version and the new version of the profile.

  These profiles are just files on the computer, and if you really just want to do the cleaning in the list, you can remove the extra copies. They are stored here:

  Windows XP: C:\Documents and Settings\All Users\Application Data\Adobe\CameraRaw\CameraProfiles\Camera\Nikon D300S

  Win Vista/7: C:\Program Data\Adobe\CameraRaw\CameraProfiles\Camera\Nikon D300S

  Macintosh: HD/Library/Application Support / Adobe / Camera Raw / CameraProfiles / photo/Nikon D300S camera

  I recommend keep v4 files, because these are the latest versions.

• List of network consolidation drives

  When I use the feature to connect a network drive, Windows 7 provides a list of the previously mapped network drives.  Due to consolidation of servers, I now about 70 invalid paths, I want that cleaning of this list.  How can I do?

  When I use the feature to connect a network drive, Windows 7 provides a list of the previously mapped network drives.  Due to consolidation of servers, I now about 70 invalid paths, I want that cleaning of this list.  How can I do?

  You don't have 70 in history...

  But...

  Look at these two locations in the Windows registry:

  • "Network HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Map SRM drive"
  • "HKEY_USERS\\Software\Microsoft\Windows\CurrentVersion\Explorer\Map MRU network drive '

  And probably clear the a - j representing the history of your drive mappings to each place.

• Recently added in the list discovered iTunes 12.4

  Hi, I've updated again iTunes 12.4 and I lost the list of recently added music view

  I mean this:

  

  The screenshot you have included is not iTunes version 12.4.

  Confirm your version by selecting iTunes > about iTunes.

• Listed unknown network device

  Two unknown devices appear on my player network as 'EXPTRACKINGPC '.

  "

  These network devices are automatically added as part of the Windows Media Player sharing features? The first one above is protected by password and I can't access the file. I don't like sharing media through Windows Media Player, how can I get rid of them?... .or is that a hack program that somehow got installed despite my security measures that have been taken? I can't find anything on the web dealing with these devices. Thank you

  It looks like another computer on the network.  You could probably open a command and ping the PC name to see what IP address it has.  Perhaps even then go to your router and disconnect them from your network.

  Some ISP problems (configuration errors) can also make your neighbor computers appear in your network.