Adding a background picture in Muse

Similar Questions

• Adding padding around picture grid (Muse)

  Hello, I am working on a site of base image grid using the following plugin: http://www.musegain.com/widgets/gallery_filter/#documentation

  I can't understand how to add a padding around the outside of the image grid to make the gutter between the images is the margin along the sides. (Red = blue where red is the absolute end of the space of the browser)

  Thanks for the help!

  

  I do not have this third party widget (commercially available), so I can't test it. And I see his promotion page that the widget panel offers a useful framework for the gutters between the images, but no margin or padding for the Committee as a whole. Maybe you are able to select the widget (or maybe some container in the whole widget) and add some inside the inner margin of the window spacer own Muse ? If this is not the case, try suggesting it as a feature request. I think that this option you are looking for is really logical from the aesthetic point of view.

• No background picture fill

  I'm having a problem which has appeared since the last update. Background fill of the image is not displayed. I tried replacing the image with the solid black color, and when I saw both Muse and Chrome, nothing is there, but the browser gray fill. The background picture fill is defined in the master page, but doesn't think on the other pages of the site. So, I'm going to set the fill manually on each page. Curiously, the home page looks fine, but I don't see where I have done something differently there that I don't have any other help, please...

  Hello

  Background image for your page is not appear on these pages because of bad HTML code you added. In the Page Properties > metadata > HTML for: section of the page shows, for example, you have:

  where the end quote is missing. If you add that end quote so that line reads:

  the background image is displayed on the page as expected.

  Dana

• Can not download background pictures on my Satellite Z830

  I recently bought a refurbished Z830 Satellite and I am trying to upload my own photos in the wallpaper: I am trying to load Windows/Web/paper painted/Toshiba, but I am not allowed to access. I created a new file in the wallpaper file, but I can't access that is.

  Where should I go and where I can upload my own background pictures?
  Thank you
  Richard B

  I assume that you want to upload pictures and use them as a slide show for the wallpaper, right?

  If so open the windows Explorer and copy all the pictures in the library > photos.
  Click with the right button of the mouse on the desktop, and choose personalize > wallpaper.
  As the location of the image, choose image library. Select your Favorites, set the position of the image and the change of time. After that confirm with save changes.

  All that s. Please test.

• How to REMOVE a photo in the background picture in the list of background photo in the display on my computer properties?

  I have a picture in my LIST of BACKGROUND PICTURES under the PROPERTIES of my computer DISPLAY area and the photo is named WINDOWS LIVE PHOTO GALLERY.  I WOULD LIKE TO BE PERMANENTLY DELETED.  HOW CAN I DO THIS?  I use Windows XP.

  Hello

  You can try these:

  a. go to the start menu and select desktop or double-click top from the desktop.

  b. go to the Tools menu, select options and then select option files and hidden folders.

  c. navigate to the folder... \Windows\. If you are presented with a warning about the change of system files, click on the link "View files" to continue.

  d. look in this folder for the background name you want to delete. If this is not the case, try looking in these places:

  i. Windows\Web\Wallpaper directory

  II. the "My pictures" folder This inside "My Documents".

  III. If you are using Internet explorer, it can be stored in C:\Documents and Settings\\Application Data\Microsoft\Internet explore

  e. If you still haven't found it, go into the Start Menu search. Click "all files and folders" and enter the name of the background to locate.

  f. When you have located the file, you can either delete or move to a new folder. Try to create a folder named Backgrounds moved. If you move the file into the new folder, it will be removed from your list, but still available on your PC if you change your mind.

• How can I place an illustrator as a background texture in muse?

  need help! How can I place an illustrator as a background texture in muse?

  Export the Illustrator file .svg file and import it in Muse.

• Adding a background of cells... There is no folder icon in the substantive area of properties?

  Add a background image to a table, a table cell or table column

  You can add a background image to an entire table, to a column of table or to an individual table cell. (If you only design for Netscape Navigator you can add a background image to a table so row.)

  Alternatively, you can display more than one background image. If you have added a background image to the entire table, you can also add a background image to a column. The image background column above the table background image. If you add a background image of a table cell, it appears on the background of table and column.

  To add a background image to a table, a table cell or table column:

  1	In the Document window, select the array element to which you want to add a background image.
  2	In the field of BG in the property inspector, select the folder icon, and navigate to the image you want to use as a background image.

  ???

  How is this relevant to the modern Web design and best practices?

  Provided for base tables design approach of the last century.

  Netscape is obsolete since 2008.

  Nancy O.

• HELP in drawing and adding captions to picture

  Please forgive my English and my beginner skills. I am really new to QT, QPainter and graphics programming.

  I develop the application snap2chat.  And I badly need help with drawing and add captions to Images.

  I tried QPainter paint brushes in the picture and save it. But it's really slow. I also added onTouch event on the image and passed the localX and localY and this is the position that I also used for the QPainter to paint on and does not have the right position for painting too.

  and also the image GET bluish when I start painting.

  QImage theimage = QImage(imagePath);
  
      QPainter painter(&theimage);
      painter.setRenderHint(QPainter::Antialiasing, true);
      painter.setPen(QPen(Qt::transparent, 3, Qt::SolidLine, Qt::RoundCap)); // stroke
      painter.setBrush(QBrush(Qt::green, Qt::SolidPattern)); // fill
      painter.drawEllipse(x, y, 10, 10);
  
      //theimage.save(imagePath, "JPG"); // I also tried uncommenting this
  
      const bb::ImageData imageData = bb::ImageData::fromPixels(theimage.bits(), bb::PixelFormat::RGBX, theimage.width(), theimage.height(), theimage.bytesPerLine());
  
      m_image = bb::cascades::Image(imageData); // this is the image I show in the ImageView
  

  Also drawing with QPainter texts it blocks with the reason for the QFontDatabase. I saw a solution in another thread to add this line , but nothing helped.

  Any suggestions please?

  I didn't know he jumped a dialogue... the alternative is to write the screen to a bitmap image and then save it, works with 10.0 api and does not require a permission to screen capture or guest

  I wrote an example that shows how to do this.

  https://github.com/slashkyle/Cascades-samples/tree/master/CaptureThis

• Background picture not visible in its entirety, WHY?

  Hello

  I want to add an image to the background of my screen. Here's how I did:

  class MyScreen extends MainScreen {
  
     public MyScreen() {
          XManager manager =  new XManager(background);
          add(manager);
          manager.add(gfm);
          manager.add(closeBtn);
     }
  
      class XManager extends VerticalFieldManager {
          Bitmap mBgBitmap = null;
          int mBgWidth = -1;
          int mBgHeight = -1;
          int mBgX = -1;
          int mBgY = -1;
          int width = Display.getWidth();
          int height = Display.getHeight();
  
          public XManager(Bitmap background) {
              super(USE_ALL_WIDTH | USE_ALL_HEIGHT | VERTICAL_SCROLL  | VERTICAL_SCROLLBAR );
              mBgBitmap = background;
              mBgWidth = mBgBitmap.getWidth();
              mBgHeight = mBgBitmap.getHeight();
              mBgX = (Display.getWidth() - mBgWidth) >> 1;
              mBgY = (Display.getHeight() - mBgHeight) >> 1;
          }
  
          protected void paintBackground(Graphics graphics) {
              paintBackgroundBitmap(graphics);
              super.paintBackground(graphics);
          }
  
          private void paintBackgroundBitmap(Graphics graphics) {
              if (null != mBgBitmap) {
              graphics.drawBitmap(mBgX, mBgY, mBgWidth, mBgHeight, mBgBitmap, 0, 0);
              }
          }
      }   //  // End of XManager Class
  }  // End of MyScreen class
  

  With this code, the background image is delivered, but only half of the screen. Even if the components arte fill full screen, yet the image is only half screen.

  I tried VirtualKeyBoard.Hide before initializing XManager, but has not made all the difference.

  Can anyone tell why I am facing this problem and how to fix it. I also added scrollbars.

  Thank you

  Hello

  I found the solution to the problem and thought to share with everyone.

  RexDoug, this is the code that creates the problem - as I said that the same code is used in other surveys of job perfectly well. Had problem with specific screen2.

  In my Screen1, I had also added FlowFieldManager with 3 buttons and I used to get the keyboard on screen1 also. Due to some factors, 3, 1 button is removed all time so only 2 are there. And now, I have only 2 buttons, I don't see the keyboard on Screen1 and also to see the images in full screen on screen2. If I still 3 buttons on screen1, again, I see the same old scenario. Cannot distinguish the reason for this behavior.

  Thank you best regards &,.

• . OAM file doesn't have the background transparent in Muse

  Why the hell can't figure out how to get a background transparent for my . OAM file in Muse? I published in CC animate with the background transparent/Stadium controlled parameters. I have tried workaround HTML people have posted and who does not either. When I published as a .swf file, it worked on my desk, but not on my iPhone. Why is - that so much to ask? I feel like this is a very important to have. The answer shouldn't be complicated. If this is the case, it's a real shame. I would appreciate any advice on this. I lost my entire Saturday afternoon trying to figure out. Thank you.

  To export files transparent OAM of HTML5 Canvas in CC documents to animate, you can try this:

  Add the extract of the following code in the Actions Panel on the first image before exporting it:

  canvas.style.backgroundColor = "rgba (0,0,0,0)"; "

  document.body.style.backgroundColor = 'rgba (0,0,0,0);

• variable window full browser which acts as background picture fill?

  I want to be able to define the full browser window variable which acts as background, but power fill then build in a horizontal Parallax anchored in multi.  The effect is as if we have a background image fill, but can slide horizontally between the pages, as if they were in a slide show.  At the same time, content in the placeholder as more long paragraphs of text can scroll down - above the layer of the image, but within the borders of the space reserved image.  For a clear example, see this Web site: http://argonautinc.com/

  I have read and searched, to no avail.  I'm only about a week in Muse, so please forgive me if it's super simple! Thank you, Nico

  Hi Nico_Cineaste,

  You can get the design using Fullscreen Slideshow in MUSE as an object.

  Open any page in MUSE, click 'The object' > slide show > full screen.

  Click on your blank web page.

  This will give you a slide show full-screen.

  Now you can design according to your requirement.

  Thank you

  Prabhakar Kumar

• Adding a Business Catalyst to Muse modules

  Hello

  I searched unsuccessfully for a reference guide to adding modules to my sites of Muse, specifically a Blog and News. All the tutorials I've found so far require the Developer tab, which seems only will be available if you pay for the package full webCommerce. However, online marketing includes Blog and News modules. And I read that I can do this with Web marketing package.

  Can someone direct me to a full tutorial on the configuration of these modules with a package of webMarketing BC.

  Thanks in advance

  Hi Aish,

  Thank you for your continued support, but none of your suggestions are correct. The problem was, since "Enable online content (incompatible with Muse) edition" was not checked. It would seem that it is automatically disabled when you download a Muse site BC believes that you do not modify the content. That actually makes sense.

  Thanks for the help.

• How can I integrate a database with pictures of Muse (to show a catalog)?

  As you can imagine, Yes, this question has a hidden background (e-commerce), of course. Muse is a window of gold to all those designers who see that it is possible to create a Web site without using code easily. But sites need rich content, which change from time to time. I would not treat right now with e-commerce, let's go step by step.

  I wonder about the integration of a database with muse, to show a catalog (for example, an inventory of products). Let's say I want to show that the products I have (but for now) I don't want to sell them.

  So I have a file access, with several fields: name of the product, quantity, Description, Maker and the last field is a field of image showing a photo of the product.

  I already have this database in access and I can open it in access, change it, watch it, browse my products, etc.

  Now, what I want is to see the Muse of this database in a page, so I would like this Muse read my database from access file and allow me to view the areas of access to the position I want (Muse) and which also include the image field.

  I want to add two buttons, left, right, to move backward or forward through the records of my database.

  Can I do this in the Muse?

  How?

  You can either use object > insert html code or an ifame to view the product page that exists on the end of your purchase (server).

  For example, if you are using Business Catalyst you can then create products on the end of BC and then use products module in Muse page. Once the module is used, it would make the products.

  The same with third party shops, you can use their output html for the page of the Muse.

  You can view the sample videos:

  http://tune.PK/video/1589742/Adobe-Muse-ecommerce-online-store-setup-by-Muse-themescom

  https://www.YouTube.com/watch?v=Vs4aSBkXMo0

  Thank you

  Sanjit

• RE: Adding custom background

  Hello everyone.

  I imported the .psd file in Encore. Later, I opened the horizons within the library, and I dragged the .psd file in the settings. But the dose of .psd file does not show inside the background, dose but it shows inside the Images in the library.

  If this is what you want, you're ready. But a double click on a background in library should just add this image as background in the menu (already added to your project) located in the view menu.

  At import it initially still 'active' or 'in the menu '?

• Add static background pictures to all frames of animated gif

  First of all, I'm not a regular Fireworks. I use it when I have to do something (especially web optimazations). I would use it more, but frankly in many cases, the user interface is not intuitive for any other adobe makes.

  Here's my problem...

  I have to Add (not substitute) static type of basis to ALL frames (states) in an animated gif with Fireworks (with alpha), the image of the final product will be a part in the animation of web edge... Details

  I have a lively seq of a spinning object has been created in 3ds max and rendered as a png with alpha seq.

  I opened the SEQ "as an animation" in fireworks. I set the pace. He plays very well. So far so good...

  I imported an image I want to be BEHIND the seq animated on all chassis. I tried to put it on a layer of void behind, I tried to put it on its own layer behind, but it shows that on the first image (State).

  I tried to use 'share with all States', but it replaces images SEQ already on "States" rather than add behind them as in the arrangement of layers.

  So first, is this possible and if so, how?

  Secondly, why is it then process against intuitive in fireworks? I mean if the layer is behind something, then it should be a click on a single button or checkbox etc to say 'show on all chassis (States)', you know like any other adobe product brands. Same "ready image" made more sense than that.  My thought process that has been since I needed to find in fireworks to create and optimize the gif that I should be able to put it together again but it turns out to be much more difficult than expected. I guess I can just composite my elements in AE (which is a piece of cake compared to the Fireworks) and will then return to SEQ another think I import to fireworks to create optimized gif. While I'm a fan of the concept of 'creative suite', one of my biggest complaints about "suite" is the lack of oversite master so keyboard and fundimental UI concepts features common, shortcuts are evenly across all the apps so it works as a 'suite' and not just a collection of separate applications. I know that demanding that all applications of following certain rules would slow development, in the long run it would make it much easier for the end-user to spend more time being "creative" and less time trying to understand why something does not work as it does in other applications. Just my $.02

  Thanks for any help and or explanation

  Joel H

  From your original animation, create a new layer and then import the image into it. Don't forget to give your layer a distinct name not already in use by another layer. Don't bother trying to drag your layer to the position of the bottom of the layer stack. It's a nightmare. Instead, leave the layer to the second lowest position and then drag the layer of background (or background) above him.

  Once the image has been added to its own layer and this layer has been named and properly positioned, you are ready to share with other States. Select the layer in the layers, ctrl-click for the context menu panel, then choose layer part in the States.