Adding a Cache of SSD drive for my laptop
I posted earlier about this and got a response from Hüffer... Maybe I misunderstood, but installing the msata ssd is proving to be more complex and more complex that I read in response to Hüffer.
When I install the SSD and start the system, I not give me the ability to choose which drive to boot from. Instead the system tried to start, fails, seems to take a dump, and then try again. If I use the ESC key and to open the OS boot manager, it still does not offer the possibility to choose the player and fails, but this time said he's trying to do an automatic rebuld. (or something of the sort). At this point, I interrupt him and force it to power down.
I tried to research the issue elsewhere, and it seems that the AHCI mode that the system works is the source of the problem. My Intel RST not have her option "speed up" which I believe is necessary and offers instead 'performance '. Here is a link to one of the better posts I found on the subject: http://www.pugetsystems.com/labs/articles/How-it-Works-Intel-SSD-Caching-148/
At the beginning of the post, you will see pictures of what the Intel RST should look like your SSD when adding. The first photo shows it with five buttons with one of them being "accelerate" and notes that this picture below:
"Launching the Intel RST software and click on the 'Accelerate' button." "If the button is not present, you or the other are not in RAID mode or one of the other conditions have not been met.
I found a setting to what happens to the bios on a windows system 8 and it offers the option to enable raid. My conclusion is that it is what I have to do to add the msata ssd in my system as a disk cache.
So... my question...
My conclusion is correct? Or maybe the answer is that my system does not meet some other requirements to use the SSD msata as a disk cache.
My system is a Touchsmart from HP Envy 15-j003cl Notebook PC. I found the reference in the Device Manager there the "Intel 8 series / C220 series family Platform Controller Hub ' and I read a decription of the hub there is hope that he does not support what I want to do. (http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/8-series-chipset-pch-datashee...
Any guidance would be appreciated.
Thank you.
To enter the RAID configuration, you must first go in the BIOS (F10) and turn on legacy startup and disable secure boot. Then you can enter the RAID configuration. You press ctrl-I (capital I) when you rewind until you get in the RAID configuration. You want to do the separate no RAID drives. But first let's see how they are defined by default. Go into the RAID Utility and do not change anything. Just report what you find.
Tags: Notebooks
Similar Questions
-
Help driver for computer laptop 14z-b000.
I recently bought the laptop 14z-b000. Problem is that I don't no the link windows 8 and installed windows 7 64-bit. Although I was able to install most of the drivers, Miss me some of them.
Ethernet controller
USB controller
As they don't seem to be on the HP website, could someone help me find the drivers that would work?
Unfortunately the solutions above did not work. Was somehow able to install drivers using driver for different laptops.
-
Hello
I want to change my system operiting from vista to xp sp2 64-bit
but I can not find the correct sata driver for my laptop
anyone can give it to me?
my laptop's (hp pavilion dv4 1106em)
waiting for proofreading & thnx no
Your model uses ICH9M-E/M SATA AHCI Controller:
-
Conversion of SSD drive for the reader to boot on m7 with Win8
I just bought a new m7-j020dx (product code E4S19UA #ABA) with Windows 8 from Best Buy. Unfortunately, it came with a standard hard disc (HDD), and I would like to install a Solid State Drive (SSD). I have an Intel 320 and 530 series-reader. But I was not able to get a bootable from that disc.
The first thing I tried was cloning the drive to plant on a new disk of 530 series using AOMEI Backupper. I got an error writing on the partition of the third. I thought that maybe the drive was bad, so I tried again with an Intel 320 series SSD drive. Same mistake.
The next attempt was to clone the disk to another disk of 1 TB (connected via USB), reduce the main partition with MiniTool and clone of the 320 series SSD. The cloning went well. However, with the new installed SSD, the computer will not start, and I get "Error0x0000225", something about a file not found. Disable "secure starting" in the BIOS setup has not helped (I did after the clone).
So I thought I would do a clean install of win 8. I generated a recovery on a 32 GB USB SanDisk player disc using Win8 recovery disk generator (as indicated on the site of HP). I then ran the program of recovery out of the USB drive and after a few hours of software installation driver and several reboots, I get a message from HP, indicating that the installation was not complete. Reinstall did not help.
I don't know what the problem is.
What the recovery disk USB one made from the original bad HARD drive (we get only a single shot at it)? Do I need media of the order of HP on disks? Are there problems with the use of SSDS on those computers? Should I not a BIOS settig correctly (UEFI)? Is there some Intel storage drivers clutter it?
I think my next step will be to create a disc Image and place it on the SSD drive. But I doubt that this solves the problem with the start to it.
Another option might be to build fresh using Win8 media, then download and install each driver from the HP website.
Any ideas out there in the land of the experts?
Vachsen wrote:
Thank you, erico, for advice.
I tried this with 320 (160 GB) series and SSD 530 series (120 GB and 240 GB). Actually, I have not tried on the 240GB again, just two other. . The 240 GB SSD is the best candidate. During cloning, using a larger SSD is the best for worms down the road when other programs are installed.
So far, I've done everything suggested this that caramel:
-Updated the BIOS for later: F.43. 03/01/2014 (HP support site).
-Installed Intel Rapid Storage Technology v. 12.9.0.1001 (taken from the Intel site).
-Updated the firmware of the 530 series 120 GB using Intel SSD Toolbox v2.0.10 of 06/20/2013 (from Intel).
-The series 160 GB 320 firmware was up to date.
-Installed the Data Migration Software Intel v. 2.0, dated 29/04/2013 (taken from the Intel site).
-Updated environmental Support UEFI v5.3.3.0 dated 26/09/2013 (on the HP support site)
-Enabled secure boot.
Even using Data Migration tool Intel did not work. Before Support UEFI environment, data migration tool would go to the step to reset but does not start what whether manually or to another. Support UEFI environment, the software says simply "Operation failed." Following the manual data migration softwarecan be a bit tricky. There are a few things about the bootind of the Acronis loader * which must be carefully designed for the operation to succeed. Intel also has a forum which can help as well.
When I hit F10 and in the Configuration of the system, the Intel RST is not available. So I suspect there is something not right here. The suggestion of updating the BIOS of caramel didn't across before it was made. It was not necessary and therefore not a good plan. I suggest that you use the Diagnostics UEFI and rollback to the previous BIOS. If you need advice with those just let me know. I have a few images that should show you what you should see.
A number of things, I noticed I did upgrades:
-The site of HP support for my computer has Intel Rapid Storage Technology 12.0.7.1002 v, dated 30/06/2013 is earlier than on the Intel site. Maybe I should roll back. That must be rolled back to the version shipped by HP. I see you introduced makes as stated in a previous post.
-The HP support site has two distinct "RST", storage technology products a quick and a quick start technology.
Intel has "RST" next to their rapid storage technology, so I might be confused. I have installed the driver of the technology of quick start on the HP support site so if it is not already on the computer, perhaps it is not running and is the "RST" which is the missing piece. In fact, same caramel said I need fast boot technology driver and then linked to download Rapid Storage Technology driver. Do not pay attention to what it says caramel.
Here are two of the same? Support site of HP with two drivers and version numbers, I suspect not. Any ideas would be useful. They are indeed different.
The Intel Rapid Storage Technology softpaq sp61600.exe driver provides NCQ (native command qeueing) features for the SATA controller.
The Intel Rapid storage Technology driver softpaq sp61325.exe is supposed to improve the SSD or mSATA consumption of hibernation and also imrove the resume from hibernation.
You can't even consider installing either softpaq to clone the drive. It is always better to keep things simple.
The SATA cable USB you use has two connectors usb at one end? It is necessary to provide enough power for the SSD for data migration is not. Connect each usb connector to a different usb port.
Dan
Intel also recommends the free use of third parties such as cloning utilities
http://www.EASEUS.com/disk-copy/
http://Clonezilla.org/downloads.php
http://www.partitionwizard.com/products.html
EASEUS is, in my opinion, the best of the three.
-
How to set up cache mSATA SSD drive
Hello
I installed a Samsung mSATA SSD drive in my X230i, but I can't find out how to set up as a cache drive.
I tried to install Intel RST. He finds the drive and after formatting the drive, he said al was good, but it didn't work...
Then I tried to install ExpressCache, but just who said their were no SSD to use...
What high do?
Best regards
Morten
If you follow this instruction?
http://support.Lenovo.com/en_AU/downloads/detail.page?docid=HT074404
-
The name of the driver of the gateway I get is Realtek Ac 97 Audio.
Ive uninstalled the driver from Device Manager and added new material.
Installation begins - the error saying:
He can not pass the test windows logo to check if its compatible with windows XPMore detailed, it says its recommended that he be not installed, if ignored its 10-error code saying that it will not start.
Hello Osnapchuckie,
Thank you for your message. Is your aftermarket sound card or is it integrated with your Gateway computer? Try to download and install the latest driver for your computer at the following sites.Bridge - click HERE to go to the gateway site and download/install the latest driver for your computer.RealTek - click HERE to download/install the AC 97 Codec from RealTek.If you are still not able to install these drivers, start in safe mode with networking and download/install the drivers from there. Click HERE for Safe Mode instructions.Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Hello. I have HP DV6-1256tx, I want drivers for my laptop compatible with the next Windows 8 operating system. How to download, can somebody help me please...
Give me the link or something where I can download the drivers...
Thank youEdriss Dave
HP does not currently have drivers for Windows 8. You probably won't need them. Windows 8 is not coming. It's here!
Just do the installation on a spare hard drive and bring the original HARD drive to a safe place.
. Windows 8 has drivers built in for most laptops and desktop computers. I did have to look for a driver in two facilities. One was an HP mini and the other was a Toshiba laptop.
-
HP Pavilion 15 laptop: Wireless Driver for my laptop HP Pavilion 17
Hello
I need to find the right driver wireless for my laptop HP Pavilion 15 (8 64-bit Windows).
For network controller hardware ID:
PCI\VEN_14E4 & DEV_4365 & SUBSYS_2230103C & REV_01
PCI\VEN_14E4 & DEV_4365 & SUBSYS_2230103C
PCI\VEN_14E4 & DEV_4365 & CC_028000
PCI\VEN_14E4 & DEV_4365 & CC_0280Hardware for the PCI device ID
PCI\VEN_10EC & DEV_5227 & SUBSYS_227E103C & REV_01
PCI\VEN_10EC & DEV_5227 & SUBSYS_227E103C
PCI\VEN_10EC & DEV_5227 & CC_FF0000
PCI\VEN_10EC & DEV_5227 & CC_FF00For PCI Simple Communitcations controller hardware ID
PCI\VEN_8086 & DEV_9C3A & SUBSYS_227E103C & REV_04
PCI\VEN_8086 & DEV_9C3A & SUBSYS_227E103C
PCI\VEN_8086 & DEV_9C3A & CC_078000
PCI\VEN_8086 & DEV_9C3A & CC_0780All the foregoing is present in my other devices category in Device Manager, I don't know exactly who is responsible for the wireless.
Any help in this regard is highly appreciated!
Hello:
You can try these drivers, but if they don't work, you need to connect via ethernet cable, do the updates required for W8 and then get the free update for the Windows store W8.1.
Network controller:
Broadcom wireless LAN drivers are required to activate the built-in Broadcom wireless LAN adapter.
FTP://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69737.exe
PCI device:
Download, unzip and run the setup.exe file from the link below... first driver listed.
Simple controller PCI of Communitcations:
This package provides the driver Intel Management Engine components for some laptop models running a supported operating system.
-
WIN8.1 64-bit driver for my laptop
Hello
I want Windows 8.1 Enterprise 64-bit driver for HP Pavilion dv6-6c50se
please hurry
Sorry my bad English
If not replay and give me any driver, I'm not suggestion bar to buy HP...
This is NOT official HP customer service and I, like most other people on this forum do not work for HP. It is a forum for users of peer-to-peer supported for class for the HP consumer products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.
Sorry, but the HP Pavilion dv6-6c50se is a consumer computer that originally shipped with the installation of Windows 7. NO driver Windows 8.1 will be made available by HP for this model. In addition, you should have bought a HP class computer business if you want support for an operating system of "enterprise".
If you have any other questions, feel free to ask.
Please click the 'Thumbs Up' white LAURELS to show your appreciation
-
M9U93PA: problem wih usb driver for my laptop
need driver for my usb driver.,.
the hardware id is below. pls send the driver
PCI\VEN_8086 & DEV_22B5 & SUBSYS_80C5103C & REV_21
PCI\VEN_8086 & DEV_22B5 & SUBSYS_80C5103C
PCI\VEN_8086 & DEV_22B5 & CC_0C0330
PCI\VEN_8086 & DEV_22B5 & CC_0C03Hello
Try the driver on the following lin k.
https://Downloadcenter.Intel.com/download/24896/USB-3-0-Intel-USB-3-0-driver-for-Intel-NUC
Kind regards
DP - K
-
Windows 7 driver for computer laptop hp pavilion dv6733tx/entertainment
Hi, my laptop is HP Pavilion dv6733tx Entertainment Notebook,
ORI windows is vista. but now I change windows 7 64 bit ultimate.
but hp wep did ' t having win 7 driver. can I use driver vista backward as below?
Hello Ivenkok,
I understand that you have changed your operating system to windows 7 from vista, and you are not able to locate the drivers on the HP site.
The drivers you are looking at are specifically for windows vista not for 7 so these drivers would not work for this laptop.
One thing you might try download this HP Support Assistant program, and it will try to search for and find drivers and compatible software for your laptop. Click on this link and will need you the HP Support Assistant page.
I would like to know if it is useful.
Thank you
-
I need a Windows 7 64 bit driver for my laptop
Hello
I got a laptop is here: laptop HP 2000-2d19WM
I need help to find the drivers, I know that you can download classis shell to replace the Start button, but it makes my computer slow and my laptop is 64 bit if someone can help me. Thank you!
Hello:
First of all, download and install the amd chipset driver and restart. You want to download the 49.7 MB file.
http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64
Then, all the W7 x 64 drivers and the software of this model will work also on your own, except the wireless.
DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE OF THIS MODEL
Use this driver for the wireless card...
-
WiFi and bluetooth driver for Hp laptop pavilion 15 n012tx
I formatted my laptop and downgraded to windows 7 computer. The laptop comes pre-installed with Windows 8. I got most of the drivers intalled. and found the intel graphics hd for windows 7 official website of intel.
but Windows 7 cannot always recognize most of the drivers. Network controller, controller bluetooth, Ethernet controller and USB driver is not found.
Default HP drivers for my notebook page does not list driver for windows 7. You guys can point me to the right driver for the entrusted mentioned hardware that can be used in Windows 8? I don't want to go back to Windows 8.
Take a look: http://digitfreak.com/i/GX.png
Hello:
Use the drivers USB and ethernet to this model.
I would need to view the ID of the hardware's for the bluetooth network and other devices, so I can determine the manufacturer/model and display drivers for those.
If you don't know where to find the hardware ID, please read the guide at the link below.
-
I have a laptop HP 15 - r032tx Notebook PC and I formatted my lappy because of some virus bad cuz its remained now my lappy is installed with WINDOWS 7 64-Bit. So after formatting I wasn't havnt readers so I got from HP website. in this case wen I downloaded all the drivers and installed it all... .and rebooted my system. and YET, there is a missing driver issue. USB and BLUETOOTH.
So could you please send me a link of drivers to download for my Lappy question.
I am unable to use a USB key and many more devices life USB USB PORT.
Please help me this problem as soon as possible.
Hello:
You find the parts list for your laptop it comes with a RT3290LE 802.11bgn 1 x 1 Wi - Fi and Bluetooth 4.0 adapter Ralink WLAN combination.
http://PartSurfer.HP.com/search.aspx?SearchText=J8B78PA
Here is the latest driver bluetooth for this card.
http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_147890_1
The product page for your laptop card indicates he has a 4th generation Intel processor core processor which means he has a 8 series Intel chipset.
Here is the link to the USB3 for this chipset driver. Download, unzip and run the setup.exe file.
-
Windows 7 driver for computer laptop 15-e037cl from hp pavilion
Good day, please help me with a link to download the drivers for my new computer hp laptop 15-e037cl I just shot of windows 8 for windows 7. Any idea please? you will enjoy
Hello:
See if it works for you...
First, install the amd chipset driver and restart. You want the 49.7 MB file listed.
http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64
Then is the graphics... install the beta amd catalyst driver and restart.
http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx
Audio: Accept the agreement, download and install the driver for the second on the list.
Ethernet: Download and install the fourth driver on the list.
USB 3.0: Install both.
Card reader:
3D Driveguard:
Webcam:
In order to provide me with the wireless driver, proceed like this...
Go to Device Manager and click on the network controller needing drivers.
Then click on the Details tab at the top of the control of the network window.
Now, you see a drop-down list of property and it is set by default to the Description of the unit.
Drop down on it and select the second item in the list (Hardware ID).
After the first string of characters that start with PCI\VEN
Maybe you are looking for
-
Is there a speed limit on the ethernet cards?
Hey guys do you have an idea who is at - it a speed limit on the Ethernet cards, because I can use the P2P so fast that, after awhile, my internet connection is stopped as, I can't do anything unless I unplug, wait a while and connect again. Don't yo
-
Hello I look for ways display a pdf file in ICB with an external program to no success. I then looked in the conversion of a pdf file to an image file. I found many of them but none of them are free and they are exspensive. Is it possible to convert
-
Use CPU in Task performance master color codes
The red and green color codes showing CPU utilization in the section master achievement mean anything? I have a XP computer that shows two lines, a red and a green for the use. My other computer XP shows a single green line.
-
Greetings. I develop a cat using the BBM 6.0 (SDK 1.0). I have encountered a problem when trying to listen to the messages sent, because the listeners are not never been triggered. This brilliant application can just send messages but not receive and
-
Hi all Basically, I have a vpn between a branch and central, it works fine but sometimes the GRE tunnels are off and stops working vpn. With reset solved, but the problem persists sometimes from time to time the way... is not a problem of saturation,