Conversion of SSD drive for the reader to boot on m7 with Win8

I just bought a new m7-j020dx (product code E4S19UA #ABA) with Windows 8 from Best Buy.  Unfortunately, it came with a standard hard disc (HDD), and I would like to install a Solid State Drive (SSD).  I have an Intel 320 and 530 series-reader.  But I was not able to get a bootable from that disc.

The first thing I tried was cloning the drive to plant on a new disk of 530 series using AOMEI Backupper.  I got an error writing on the partition of the third.  I thought that maybe the drive was bad, so I tried again with an Intel 320 series SSD drive.  Same mistake.

The next attempt was to clone the disk to another disk of 1 TB (connected via USB), reduce the main partition with MiniTool and clone of the 320 series SSD.  The cloning went well.  However, with the new installed SSD, the computer will not start, and I get "Error0x0000225", something about a file not found.  Disable "secure starting" in the BIOS setup has not helped (I did after the clone).

So I thought I would do a clean install of win 8.  I generated a recovery on a 32 GB USB SanDisk player disc using Win8 recovery disk generator (as indicated on the site of HP).  I then ran the program of recovery out of the USB drive and after a few hours of software installation driver and several reboots, I get a message from HP, indicating that the installation was not complete.  Reinstall did not help.

I don't know what the problem is.

What the recovery disk USB one made from the original bad HARD drive (we get only a single shot at it)?  Do I need media of the order of HP on disks?  Are there problems with the use of SSDS on those computers?  Should I not a BIOS settig correctly (UEFI)?  Is there some Intel storage drivers clutter it?

I think my next step will be to create a disc Image and place it on the SSD drive.  But I doubt that this solves the problem with the start to it.

Another option might be to build fresh using Win8 media, then download and install each driver from the HP website.

Any ideas out there in the land of the experts?

Vachsen wrote:

Thank you, erico, for advice.

I tried this with 320 (160 GB) series and SSD 530 series (120 GB and 240 GB).  Actually, I have not tried on the 240GB again, just two other. . The 240 GB SSD is the best candidate. During cloning, using a larger SSD is the best for worms down the road when other programs are installed.

So far, I've done everything suggested this that caramel:

-Updated the BIOS for later: F.43. 03/01/2014 (HP support site).

-Installed Intel Rapid Storage Technology v. 12.9.0.1001 (taken from the Intel site).

-Updated the firmware of the 530 series 120 GB using Intel SSD Toolbox v2.0.10 of 06/20/2013 (from Intel).

-The series 160 GB 320 firmware was up to date.

-Installed the Data Migration Software Intel v. 2.0, dated 29/04/2013 (taken from the Intel site).

-Updated environmental Support UEFI v5.3.3.0 dated 26/09/2013 (on the HP support site)

-Enabled secure boot.

Even using Data Migration tool Intel did not work.  Before Support UEFI environment, data migration tool would go to the step to reset but does not start what whether manually or to another.  Support UEFI environment, the software says simply "Operation failed." Following the manual data migration softwarecan be a bit tricky. There are a few things about the bootind of the Acronis loader * which must be carefully designed for the operation to succeed.  Intel also has a forum which can help as well.


When I hit F10 and in the Configuration of the system, the Intel RST is not available.  So I suspect there is something not right here. The suggestion of updating the BIOS of caramel didn't across before it was made. It was not necessary and therefore not a good plan. I suggest that you use the Diagnostics UEFI and rollback to the previous BIOS. If you need advice with those just let me know. I have a few images that should show you what you should see. 

A number of things, I noticed I did upgrades:

-The site of HP support for my computer has Intel Rapid Storage Technology 12.0.7.1002 v, dated 30/06/2013 is earlier than on the Intel site.  Maybe I should roll back. That must be rolled back to the version shipped by HP. I see you introduced makes as stated in a previous post.

-The HP support site has two distinct "RST", storage technology products a quick and a quick start technology.

Intel has "RST" next to their rapid storage technology, so I might be confused.  I have installed the driver of the technology of quick start on the HP support site so if it is not already on the computer, perhaps it is not running and is the "RST" which is the missing piece.  In fact, same caramel said I need fast boot technology driver and then linked to download Rapid Storage Technology driver. Do not pay attention to what it says caramel.

Here are two of the same?  Support site of HP with two drivers and version numbers, I suspect not.   Any ideas would be useful.  They are indeed different.

The Intel Rapid Storage Technology softpaq sp61600.exe driver provides NCQ (native command qeueing) features for the SATA controller.

The Intel Rapid storage Technology driver softpaq sp61325.exe is supposed to improve the SSD or mSATA consumption of hibernation and also imrove the resume from hibernation.

You can't even consider installing either softpaq to clone the drive. It is always better to keep things simple.

The SATA cable USB you use has two connectors usb at one end?  It is necessary to provide enough power for the SSD for data migration is not. Connect each usb connector to a different usb port.

Dan

Intel also recommends the free use of third parties such as cloning utilities

http://www.EASEUS.com/disk-copy/

http://Clonezilla.org/downloads.php

http://www.partitionwizard.com/products.html

EASEUS is, in my opinion, the best of the three.

Tags: Notebooks

Similar Questions

  • External RAID 0 drive for the reader to "work"?

    Does anyone have an experience on the use of an external drive of Raid0 for the directory of files work with LR3 + and Windows 7 64?  Raw files are mainly of a Canon 5 d 2, which makes them more 20Meg after conversion to DNG.

    My workflow means that files are moved to other readers in a week or two and will be saved since the external RAID every day as well but is not on the backup, but rather a quick and flexible system that allows me to easily work with files on several computers.

    Any ideas or experiences to be more welcome. Thank you.

    Just as an update where everyone wonders how external eSATA andRAID 0 works with LR and W7 64 bit, the answer is in fact very well.

  • is there a driver for the faxphone l80 printer that works with Vista home edition

    Identical to the subject

    Hi RayBlack.

    There is a driver available for the 32-bit version of Windows Vista, however, the L80 doesn't support printing on the 64 bit version of the Windows operating system.  You can download the driver by clicking on the link below:

    FAXPHONE L80 - software and drivers

    Click on the drop down arrow to [Drivers] and select the fax printer driver.  Select "I agree - Begin Download" to download the driver.

    I hope this information is useful for you.  If you need assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

  • I've just backed up with an external hard drive for the first time, but my profile with my folders for photos, documents, and movies are not there

    Hello

    So, I finally got an external hard drive. I formatted for Mac (the device has been verified as being correct), and then he started to do a backup, which stated that a full backup would take 95GB. However, it only supported 19GB.  When I have my 'open' backup drive, I saw that only 'Macintosh HD' received support upward, not my user profile with all my folders containing documents, photos, movies, etc...

    I'm quite confused, because I thought that it would save.  I plan on Snow Leopard update to El Capitan, but if something is wrong or I don't like, I'm afraid that I won't be able to restore all my personal files - but only the applications that are on my Macintosh HD.

    Should I delete everything in my backup disk and try again?

    This is an image of what's inside my external hard drive:

    You have not indicated how you have saved, if you've used Time Machine then you do things the hard way and you'll find very difficult TM. Please use the Time Machine interface to locate your saved data. You can benefit from the research on:

    Use Time Machine to back up or restore your Mac - Apple, Support the section you want to find is the restoration section.

  • External hard drive not a letter from reader: I already installed device driver for the same thing and it's showing in disk management.

    External hard drive not a letter from reader: I already installed device driver for the same thing and it's showing in disk management. But when I checked in system information, it is also displayed device but sectors and the tracs where showing the value 0.

    Hello Sharan,

    These links may help:

    http://TechNet.Microsoft.com/en-us/library/cc750198.aspx

    http://TechNet.Microsoft.com/en-us/library/cc977219.aspx

  • Portege M200: Can't find the right driver for the TouchPad

    Hello

    I have a problem with my Portege M200.

    Can't find the right driver for the TouchPad or a pencil,
    I read that it must be a Wacom Touchpad, but no driver I've tried has worked.

    I hope someone can give me a list of all the drivers that I need to use my pen on the screen!

    Thanks in advance.

    Chris

    Hello

    All the drivers are located on the European driver Toshiba page.
    Please check again.

    The touchpad needs an Alps Electric touchpad driver. It s is available on the page.
    In addition, you should the Tablet Pack (on the page too)
    This tablet PackMicrosoft Pack Microsoft Office XP for Tablet PC (Tablet Pack) allows you to write directly with your stylus in the documents of Office XP on your Tablet PC.

    By the way; You must use the pencil that was equipped with the Portege M200

    Welcome them

  • I can't watch DVDs on my computer it say I need some update the driver for the video card

    I can't watch DVDs on my laptop it tell me I have to install a driver for the video card update

    Hello

    It seems that you try to update the drivers for DVD. I offered to you to update the video card reader.
    Try update video card driver.
     
    See also:
  • Microsoft Bluetooth Notebook Mouse 5000 installation error: "problem installing the driver for the device software - file to install the driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or la

    Original title: Microsoft Bluetooth Notebook Mouse 5000 install problem

    I have a LG S1 Pro Express dual computer with vista sp2. My Bluetooth Notebook mouse 5000 can be coupled to my computer, but after pairing, it will say "Device Bluetooth HID - ready to use" and "unidentified - device failed. It then opens a window saying "problem of installing the software driver for the device - driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or later. »

    I checked some things here and read about intellipoint 7.x and installed but it still does not work. This used to work before mouse

    Hello
     
     
    The drivers that you try to install seems to be corrupted. Let us fisrt remove all traces of the software driver for this device in the Device Manager and then install the drivers from the manufacturer's Web site.
     
    Step 1.
    You can uninstall the audio drivers completely from the Device Manager and re-install from the manufacturer's Web site.
    I would also recommend to check if there are Windows updates for this device.
     
    Step 2.
    Here is the link to download the latest drivers.
    http://www.Microsoft.com/hardware/download/download.aspx?category=MK
     
    Select the type of product like "Mouse" and select the product as "Notebook Optical Mouse" and your version of operating system and the language of the operating system.
     
    This page will direct you to a link to download the IntelliPoint software, which is the software of the mouse.
     
    For more information see the links below.
     
    I hope this helps.
     

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Driver for the graphics controller ATI Radeon® 9200

    Driver for the graphics controller ATI Radeon® 9200 for windows 7

    Hello

    read the following answes provided http://social.technet.microsoft.com/Forums/en-US/w7itprohardware/thread/712115f9-9416-42c1-9c7c-53b676692d3c

    Please click the checkbox as replied on this Page if this post solves your problem, as it helps others who need quick access to the answers THANKS AND GOOD LUCK

  • Hello, I am looking for driver for card reader memory vgn-fz250e for win7 64-bit

    Hello, I'm looking for a driver for card reader memory vgn-fz250e for win7 64 bit, I downloaded all the driver on your Web site and try, buy does not work, can you tell me which one is right, thank you very much!

    Try this one from HP:

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...

    Other people have said that the HP driver works fine with 64-bit Vista VAIO.  If it doesn't work no, just roll back the driver in Windows Device Manager.

  • I get the blue screen in the LR development mode, even though I have updated the driver for the graphics card on this new laptop. It's an AMD Radeon R5 M335 4 GB memory DDR3, core i7 6th gen processor. What should do?

    Hi guys, I get the blue screen in the LR development mode, even though I have updated the driver for the graphics card on this new laptop. It's an AMD Radeon R5 M335 4 GB memory DDR3, core i7 6th gen processor. What should do? Thank you

    This Eizo has a normal resolution of 1920 x 1200 pixels. I expect not to see a lot of benefits of using the GPU. You really see the advantage to screens that are at least 4K (3840 x 2160 pixels) or more. On small screens, you can see some benefits with smoother updates if you ONLY use the base sliders to develop. If you use brushes, turning on the GPU can actually slow you down a bit. In most cases, loading images in develop is also slower when you activated! There are a few illustrative notes to an engineer from Adobe that you can read here: notes for Lightroom CC GPU (2015) in order to better understand what is happening. Currently, in most cases, I recommend leaving off the coast. I think that Adobe is trying to improve and have more cards supported, but it is not yet completely there.

  • OfficeJet Pro 8500: There is no driver for the Officejet Pro 8500 for Windows 10?

    Cannot find a driver for the Officejet Pro 8500 on Windows 10

    Former driver is blocked running.  Where is an updated driver?   Worked very well under Windows 8.1.

    Reinstall the driver of windows 8.

  • L750D-14R satellite - cannot install the driver for the TouchPad Win7

    Hello

    I have a problem with drivers for the touchpad. I downloaded v 15.2.11.1 Synaptics and me couldn't install them.
    "Installation of Synaptics (sync TP) ranked" I've got Windows 7 x 64. I've looked everywhere but I can't find any information on this problem.

    If someone knows what can go wrong and how can I fix this problem I would appriciate it.

    Never had any problems with installing the touchpad driver.
    I guess its not the touchpad driver problem but the problem with your system.

    First, you must uninstall the old driver for the touchpad.
    This can be done in the control panel-> programs & features

    Clean the system using some freeware like for instance CCLeaner tools.
    Restart the laptop between procedures.

    Then download driver Synaptics driver Toshiba UE page.
    Alternatively, you can try to install the driver for the Synaptics driver page: http://www.synaptics.com/resources/drivers
    In my case it worked and this driver has added some additional options that I would change in the Synaptics touchpad settings

  • ASIO Driver for the Conexant high definition SmartAudio 221

    The laptop is: "Satellite Pro P300 PSPC5E.
    The sound card is: "Conexant High Definition Smart Audio 221.
    The operating system is: "XP".
    The driver instaled audio is: "Conexant HD Audio version 3.47.1.50" (the only one offered by Toshiba in the drivers downloads page) (comes in the zip file: 'sound - 20081014174616.zip'.) Once installed the reported driver file is: "CONEXANT\CNXT_AUDIO_HDA\UIU32a.exe")

    The problem is that this driver works slowly with the software for music production Steinberg "Cubase 5".
    Steinberg recommends the use of an ASIO driver for the better functioning of Cubase 5.

    So, the QUESTION is: "Where can I find, if it exists, an ASIO driver for the Conexant High Definition Audio Smart 221 to install in the Toshiba P300 with XP OS?"

    Conexant page there is no option to ask.

    Thanks in advance.

    G.

    I'm sure that Toshiba doesn't support these things and with this problem, you are on your own.

    Another thing: Satellite P300 is designed for Windows Vista and it would be interesting to know if there is a difference if you run this on Vista.
    Version Vista. Steinberg "Cubase 5"?

    They have the best experience with own product and I'm sure they can help you with this. If they recommend something, they know where to find it. Recommendation is based on the tested driver. Then ask them where to find this driver.

  • Satellite L505 - installation of Windows 7 can't find driver for the DVD

    Hello

    I bought a Satellite L505 with Windows 7 home 64 bit. Now, I want to install Windows 7 Professional 64 bit. However when the installation starts he reports that it cannot find a driver for the DVD.

    Who can help

    Concerning

    P. Engels

    Hey,.

    If you do a search on Google you will find a lot of results on this error message and in general it s associated with the middle of the installation (DVD itself).

    Do you use an original disc of Microsoft Windows 7, or is it a copy to a friend?

    You should only use the Microsoft original disks with valid software.

Maybe you are looking for

  • FLASHING

    MY DESKJET SERIES PRINTER ORANGE LIGHT JUST FLASHING 890C jbeepath

  • Outlook express can open the 32 bit IE instead of 64-bit browser in xp pro 64 bit

    new hard drive and reinstall xp pro 64-bit. Now all attachments and links of web page {where necessary} open 64-bit IE browser for flash and some adobe products will not work because there is still no 64 bit support. How can I fix my outlook express

  • History of VPN Session

    Hi all I need to view the history of connection using ASDM ipsec vpn. In ASDM, there is an option under vpn/control that displays the vpn connection, but only vpn connection in real time. But I need is all the logon. Thanks in advance

  • How to display the tab sign in the right navigation pane (acrobat XI)?

    The sign tab is not displayed in the right navigation pane. Show the tools and commentary.

  • Robots and site.xml

    Back in the day of dreamweaver, I could put my meta data in and creating a site.xml from third party software and download by ftp.I wonder if robots Act in the same way inserting < name meta = "robots" content = "index, follow" > in 'HTML code for <