Adding another hard drive

Similar Questions

• If your computer comes with a hard drive of 32-bit pc will work better by adding another hard drive of 60 bits or transfer all files on the hard drive of 60 bits?

  The pc is a hp pavilion a706n and windows vista ultimate.

  Hello

  You confuse the version of Windows with the hard drive.

  A hard drive is a physical device for Windows (operating system)
  are the programs installed. When the data is created and saved which are written in the
  hard drive. A hard disk is analogous to a wardrobe as a storage device.

  Hard drives are not little dependent, which means that you can run Windows 32 or 64 on them
  If the rest of the system is compatible with every version.

  Windows can be 32-bit or 64-bit. But not all hardware systems can run both.
  Many 32-bit systems cannot run 64-bit Windows.

  Your computer came with at least a possible hard disk to add possibly
  internally, and certainly outside.

  WiKi - hard disk drive
  http://en.Wikipedia.org/wiki/Hard_disk_drive

  As TrekDozer said that your computer cannot run as 64-bit Windows if you need to stay
  with 32-bit Windows. However, you can add additional hard disks of extra disk space.

  Check with HP support, their books online and the drivers, diagnosis, and
  their forum are good sources of information from others with the same or similar
  systems.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• PERC H330 and Raid 5, try adding another SATA drive raid 5 array

  Hi all

  I have one server PowerEdge T330 with 8 slots of disc and have currently 3 SATA drives running a raid 5 configuration.  I have a virtual disk configured for Raid (must).

  The operating system recognizes the disk and is able to use the resources...

  My desire is to add another hard drive to the table (hard disks of the same size, same brand, etc.) with 4 disks without losing any data.

  I looked in the settings of the iDrac and the only adjustment was to add the new disk as a global hot spare or a hot spare dedicated to the virtual drive.

  I also looked in the BIOS and do not see a way to add the new drive.

  Does anyone know how to increase capacity?  I can blow the virtual drive if necessary and start over without problem.  I intend to gradually accomplish this Act until adding 8 disks. (5 times).

  Help!

  Hello.

  Management controllers RAID and tables is not made in the BIOS iDRAC or systems. For the management of the RAID (virtual disks) arrays, you have OpenManage Server Administrator (OMSA). If not installed, see the link: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=TK61C once installed, go to-> Storage->-> H330 PERC controllers-> virtual disk--> sub tasks available-> select reconfigure and run-> then check a box to add the fourth disk on the next page. Follow the prompts and allows you to extend your range of RAID 5.

• How can I move the main library of FCPX sys HARD drive to another HARD drive

  I am a beginner FCPX...

  I use an SSD as diss system. I n ' love to load this SSD with such a library. Is it possible to move the main library on another hard drive?

  A big thank you to you all

  Michel

  Assuming that the middle is inside the library, just copy it to another disk and remove it from the SSD. It must be a Mac disk in format.

• NTLDR is missing - when you try to install Windows 7 on another hard drive

  I have a PC Compaq Presario SR2027X a/w Win XP Media Center Edition SP3 installed.  I downloaded and installed the Microsoft Windows 7 Upgrade Advisor to determine if WIN 7 would go on my system.  The airport of Win 7 Upgrade Advisor said that I could install Win 7.  I bought Win 7 32 bit and 2-1 GB PC5300 memory sticks.  I first installed the memory and booted up the system.  Everything worked well.  BIOS has seen the new memory and I have not encountered any error.

  I then turning the system off and removed the HDD (120 GB Sata).  I installed another hard drive (160 GB Sata) which had been restructured and ready to use.  The BIOS detects the hard drive and the BIOS has been changed for a start of the OPTICAL drive.  I then placed the WIN 7 32-bit software disk in the OPTICAL drive and saved the changes in BIOS and rebooted the system.  I was expecting to see the normal WIN 7 screens during the installation.  Instead, I got "NTLDR is missing, press CTRL + ALT + DEL to restart".

  Then I tried pressing ESC during boot to enter the boot menu.  Once in the boot menu, I select the optical drive and now I get the message "DISK BOOT FAILURE, INSERT SYSTEM DISK AND press ENTER".  I opened and close the optical drive optical drive light lights up, and I then press on enter.  I get the same message on "DISK BOOT FAILURE,...» ».

  I built more than 40 PC and have never had this problem.  Is there something unique about Compaq/HP PC's that prevents me to install WIN 7 on another hard drive that is not the original hard drive came with this pc?

  HP / Compaq computers are no different from any other computer on the market. You can install Windows XP, Vista, 7 or 8 on almost all made within the last 7 years.

  I think that your problem is due to a failure of CD/DVD drive or disk installation of Windows 7 corrupt or unbootable. Please check that the CD/DVD drive is fully functional and functional as should be. Also, check that your Windows 7 disc is free of errors and that it is bootable. If necessary, you can download a Windows 7 SP1 ISO from HERE and HERE and also download Windows 7 USB/DVD Download tool.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• DV7-6c95dx: ADDING 2nd HARD DRIVE WE DV7

  ADDING 2ND HARD DRIVE - IT DOES NOT APPEAR UNDER MY COMPUTER - I DON'T KNOW IF SA FORMATTING OR NOT - CAN GET SOME DIRECTIONS - THANK YOU

  How did you add it? Where's the hardware mounting hard disk? In any State of cause, assuming that you have installed a hard drive was bought, it would be empty and needs be initialized (mounted) and formatted. To find computer or this PC in the right click menu... Choose manage, disk management and you will see a Visual representation of the hard drives. It can automatically prompts you to initialize the disk. Once do you that and format it in ntfs and assign a drive letter and the name of the volume, it will appear in the computer as a lettered drive.

  http://www.computerhope.com/issues/ch000588.htm

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I want to add another hard drive to my computer pls HELP

  OK, so I want to add another hard drive for my windows xp, 512 MB of ram and 32 GB of hard drive and it's a Dell Dimension 3000/desktop PC.

  How can I get a new one, how do I know if it is the right type, where I'd get a? Thank you for your help :D

  You look at the manual of your system, see what kind of connection there / what lead types/sizes it can manage and buy appropriately.

  However - given the age of this system - I'm just down, buy an external USB drive and use it.  You will eventually be able to take to any machine use - including the one that replaces the one you have.

• Please help me. How can I unlock my administrator account while accessing this form another hard drive. ?

  Please help me. How can I unlock my administrator account while accessing this form another hard drive. ?

  Please help me...
  I use windows xp svc pack 3. some how it gets corrupted now and all my important data is in the folder my documents on my desk. I got my account with a password. I tried to repair my widows through the recovery console, but I was unable to open a session in my Windows through this procedure just stuck computer is there. even when I tried to fix it through the installation of windows, Setup also stuck on the step where it says "in search for earlier versions of windows."
  now, I tried to copy the data by accessing another operating system on another hard drive but when I opened my account administrator located in the documents and settings folder, it says access is denied. I really need that data on these files is very important to me.
  If you have an administrator password in windows, then the recovery console would need in order to log in the disk system, i.e. the c prompt.

   

  If you tried to do a repair with the cd, then it may not have worked if your cd is the sp2 version of windows on your computer has been updated to sp3 version.  for the sp2 of xp cd works, you will need to uninstall the update to sp3 via Add/Remove programs.

   

  so, now that you have enslaved the hard drive on another computer, you will need to do is try to take ownership of the files/folders:

   

  http://www.bing.com/search?q=how+to+take+ownership+of+folders&src=IE-searchbox&form=IE8SRC

   

  
  --
  db·´¯`·...¸><)))º>

  .

  "honeymtrk" wrote in message news: d1c5394d-1aad-4f12-bd12-bc4b485bc596...

  Please help me. How can I unlock my administrator account while accessing this form another hard drive. ?

  Please help me...
  I use windows xp svc pack 3. some how it gets corrupted now and all my important data is in the folder my documents on my desk. I got my account with a password. I tried to repair my widows through the recovery console, but I was unable to open a session in my Windows through this procedure just stuck computer is there. even when I tried to fix it through the installation of windows, Setup also stuck on the step where it says "in search for earlier versions of windows."
  now, I tried to copy the data by accessing another operating system on another hard drive but when I opened my account administrator located in the documents and settings folder, it says access is denied. I really need that data on these files is very important to me.

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• How to transfer all programs and files to another hard drive

  I want to transfer all my programs and files on another hard drive.  How I could do. ?  my windows has been preloaded.

  Hello

  programs need to be reinstalled from the original media

  You cannot transfer installed programs

  to transfer files, read this:

  Move your folders and files of the user to a different partition

  http://www.vista4beginners.com/move-user-files-folders-to-another-partition

  _______________________________________________

  and I think you should dissipate what you try to do

  Another question in the repair of Vista, that you want to move that installed full operating system, not only programs and the files on another hard drive

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/how-to-transfer-Windows-onto-a-new-harddrive/33df38cf-9477-E011-8dfc-68b599b31bf5

  and read this on how to back up your data and also make a complete pc backup

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

• How to copy "Files on your computer" on a DVD or another hard drive?

  Using Vista Pro, hard drive ok. How can I copy files "folders on your computer" to a safe place of DVD or another hard drive. Motherboard broken will be replaced.

  * original title - copy "MSN 10" "files on your computer ' * '"»

  Hello

   

  Like you said motherboard broken will be replaced, then how access your computer?

  I suggest you follow the link to find out how to copy files and folders below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/copy-a-file-or-folder

• Can I create a profile user account on one separate hard disk other than 'C' or can I move an active profile to another hard drive?

  Can I create a profile user account on one separate hard disk other than 'C' or can I move an active profile to another hard drive?

  No, you cannot create profile on something other than the system drive. You cannot move the entire profile, but you can move directories in sketch.

  http://www.edbott.com/weblog/?p=1371

  MS - MVP - Elephant Boy computers - don't panic!

• I bought yesterday, but my computer got the problem, I can instill in on another hard drive

  It is a cc to indesign, the payment of one month, I bought yesterday, but my computer got the problem, I can instill in on another hard drive

  Yes, your subscription can be activated on both computers at the same time for your non-simultaneous use, and you can disable an existing installation when installing on another machine.

• How to insert another hard drive in a dv7 6140ew

  Hello

  I was wondering how to install another hard drive to my new dv7 (it helps to have two hard drives on board). I have two questions:

  1. I lose my warranty if I open the lid?

  2. why I can't find the plugs for the second HARD drive, they are hidden deep somewhere?

  Thank you for your suggestions,

  Greetings

  This is the product that you need to install a second hard drive in a laptop dv7-6000:

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&products_id=379&ZENiD=a5e8cd889caf6cb9b7253c1cc5ed41ce

  Many users here have reported satisfaction with newmodeus products.

  I agree with erico, you does not affect the warranty by opening the hard drive and memory cover... This is considered to be user accessible.

• How do we install Adobe Creative cloud on another hard drive?

  How do we install Adobe Creative cloud on another hard drive? I am trying to install it on the ssd, but I don't know how I had to do!

  Hi Pedro,

  You can change the installation location through the desktop Adobe CC application.

  Click the gear on the top icon right > select Preferences > section under the creative cloud, you can set the installation location.

  Kind regards

  Sheena

• can I have the catalogue of all and any files outside the program in another hard drive?

  Hello

  I installed lightroom 4.4 on my hard drive

  I would like to have all the files in another hard disk, overview and catalog

  just create a catalog to another hard drive?

  I mean I want to only keep the program in a single disc

  and in the second drive hard all previews files, inches, full screen and slide show hidden and so on in the second hard drive

  Can I do?

  How can I do?

  Just create the catalog in the secondary hard drive, import files?

  Thank you!

  Okay, so create the catalog on the 2nd SSD and then import