Adding variable content in the Stop/Pause message box

Similar Questions

• Judgment on his own computer. Get the stop error message: 0x9C

  Original title: blue screen

  Just my pc stops and restarts itself.  I usually get a blue sreen that says stop: 0x0000009C (0x00000000, 0xB8344050, 0xF2000840, 0 x 00000800) how can I stop this?

  Hello ifd.

  The stop 0x9C blue screen indicates a hardware error reported to CPU.

  It would be best to contact the manufacturer of your computer to run hardware diagnostics on the machine.

  You may also be able to provide files dump generated in them to help determine which component has failed.

  Best regards

  Matthew_Ha

• Disappearance of the stop 'goodbye' message?

  Hello. I just noticed that in the thread on the latest firmware, someone asked if the rocket 'goodbye' message gone for others after the update of the firmware.

  The message "Goodbye" has disappeared on my own year last when the patch firmware.28. In fact, I thought it was intentional at the time!

  In any case, could someone Sansa gurus explain to me where the message is supposed to reside and know if I could have deleted or something? And if there is a way to find it.

  I would like that it back, even if it is an aesthetic detail.

  I can confirm that.  He wouldn't say goodbye to the rest of the world, but when the value of North America see her returned message.

  Fred

• iDocumaker - difference of variable content in the options "preview" and "Edit".

  Hi Experts,

  We work on v3.2 iDocumaker and facing a strange problem.

  (1) we FORM level overflow by a letter that is triggered after more than once co-owner information from XML. It is a repeating block.

  (2) assuming that A, B, C are the main owner and respective co-owners on a policy, my letter is printing 3 times, with A, B, C address.

  (3) I use KICKTOWIP, to send the transaction in the queue of TEC, where I pull of iDocumaker.

  (4) when I do a preview of the transaction search work in PROGRESS, I am able to see the letters in order, A, B, C

  (5) when I click the button change, I still can't see the same SHAPE, say LETTER occurring three times, for A, B, C

  (6) However, when I click on "working"; the three images/FORMS are initialized with data ONLY... There is no B or C data in the following images.

  Can someone help me with this mess?

  We use v3.2 IDS and SQL 2008 as database.

  Thank you

  Pradip Kumar

  The most likely answer is to edit the article and click on each field. In the attribute properties section, change the scope of overall shape or Section.

  Entry spreading fields delimited globally throughout the entire transaction. Form field propagates to all sections of the form in this event. So, if you set the field in the article or form fields, you should be fine. Remember to regenerate any existing WIP as those that you have previously run will continue to have fields defined in the global scope.

• OSB - How select variable used in the routing for buss request message. serv.

  I have "modeling of a stream of messages to a proxy service.
  According to the content of the incoming request message, a (conditional) branch is selected. The message must be routed to a business service in this branch.
  This service of the company has a different message definition requires that the proxy service. A kind of transformation is probably necessary. (not yet implemented)
  Question is how to choose what variable structure (I created a variable of Interface Service for business) that will be used during the call to the sales department.
  Only thing that I can choose, the service and operation.
  
  How to continue?

  The payload for the service of the company must be in the * variable $body. There are also other variables pre-defined as $header and $attachments that could make sense if your need to send SOAP headers or accessories for business service.

• Satellite A100 - recovery will not be finished and stop error message occurs

  Satellite A100-S2211TD, OS is Windows XP Home Edition of recovery disk,

  I have updated the BIOS to 2.20 and laptop was working fine. The old installation of Windows factory has worked well.
  After a few weeks, I tried to use the recovery disk to remove the noise from the HARD drive.
  The recovery of disk task completed and the computer restarted.
  I got the stop error message
  STOP: 0x0000007B (0xFA335528, 0xC0000034, 0x00000000, 0x00000000)
  I removed the memory that I have entered over the past two years and return the PC in the factory scene.
  However, recovery will not be finished (he worked to restore).

  I am able to boot in dos with a separate boot disk (Dr. back, windows does not start, not even in the safe control mode) and I did chdsk of the disc and disc is fine.

  I've never used before recovery disc, the only thing different is BIOS 2.20 instead of 1.50.
  WEB of TOSHIBA said that if you upgrade the BIOS most 2.00 you can not return to 1. XX

  Thank you
  g

  Hello

  The A100-S2211TD doesn t support the Intel Chipset!
  This laptop was equipped with the ATI graphics card and the graphics driver on the Toshiba page contains us the graphics driver and chipset driver!

  Have you received 100% good recovery CD?

  In your case I would try to install Win XP from the Microsoft CD to check if the same error would appear if no drivers are included in the CD of the OS.

  Check it out

• Message box in function that returns a list deletes the created list... (Dialog box)

  Hello

  I work with a complex dialogue, its purpose is to manage a section in the PDF file.

  I use a "mclv" object in the dialog box to represent data entries in the PDF file in order to manage the result in another section.

  I created a function that creates the list based on a previous section in the PDF object, the function works perfectly well.

  But I have a small question, the function used to create the list of the dialog box object performs a check with the former front list created, as appropriate,

  and if in any case it is different from the old list, I need to warn the user that the list has changed and if there were any changes applied to the result it will be returned to zero and must be recreated.

  But when the poping that message box, all lists are deleted and nothing is displayed in the objects 'mclv.

  If I remove the message box, the lists are all very well...

  Is there anyone who have come across something like this before? If so, any solution to this problem?

  I asked my question a bit too quickly, I already found a work around

  But I still don't understand why he behaves like that tho...

  I just thought how to work around this problem.

  If anyone has encountered this problem can use this solution:

  Instead of having the message inside the function to return box, I declared a global Boolean variable to the Script object

  If the message box must be displayed, the Boolean value is set to True

  Once in the initialize event of the dialog box, if the value Boolean true I call the message box and reset the value Boolean false

• message box at the same time

  Hello

  I did a demonstration program which is my problem. I want to show these two separate at the same time message boxes, but do not know how...

  I need to make the decision after the two message boxes are displayed. Any idea?

  Thank you

  Jernej

  The Express VI you are using uses the functions of the modal dialog box. Thus, the other cannot be displayed until one is recognized. You will need to create your own dialog boxes that are not modal. There are a few examples with LabVIEW on creating dialog boxes. Also do a search, as questions about the custom dialog box Create boxes has developed several times.

• Prevent printing of PDF forms and masking of the useless message boxes.

  I have a PDF form and I need to avoid printing this PDF form, if the fields are empty.

  To change my form, I use Adobe LiveCycle Designer ES3.

  On how can this be done is written here: http://Forms.stefcameron.com/2008/04/13/prevent-printing-PDF-forms-in-Acrobat-8/

  The only thing that I need more than this article - is to remove the cancelled 'Impression' message box.

  So, if anyone knows how, please help me.

  Hello

  the XFA specification does not describe not a way to remove the error message for the item to validate, so it seems to be impossible.

  http://partners.Adobe.com/public/developer/en/XML/xfa_spec_3_3.PDF#page=1340

• Windows Installer message box keeps popping up

  Get the windows installer message box stating that 'the component you are trying to use is on an unavailable network resource' when I click OK or cancel, another different with the installation package message box appears.  When I try to find the source of the user on the hard drive, I can not find the path.  Cannot install Windows Installer CleanUp because of these boxes.  He thinks that there are other facilities running and asks me to install these first.  Have SP2, run virus check, etc.  Help?

  Hello

  When you say that you can not install Windows Installer CleanUp, I just need to clarify. You mean the latest version - Msicuu2.exe? The link here...

  http://support.Microsoft.com/kb/290301

  If so, wow... interesting problem. You can even run the program because you have to many contradictory installers that he used to open them. I or someone of another HERE will tackle this problem if that's the case, but first - let us know if the latest tool Windows install cleanup has the same problem?

  Too... before I give it a shot... Make sure you have all the disabled virus scanners because they can also interfere with Setup and cause problems.

  Hope this helps,

  Steve <> Microsoft Partner

• Adding the user variable to test the result message - Captivate v4

  Captivate v4, Windows XP.

  I have a test that begins with the variable user to enter the name of learners etc.

  I created a 'pass' certificate that only those who are successful will see. (FYI... Allowing for the learner to print their certificate in the landscape of the Cap 4 is another challenge, not covered on this thread, but if someone has the free answer, please let me know).

  I wish that the learner to see on the slide of test results is their outcome variable name user at the start of the project. EG.g < Noel > Bravo, you have succeeded, where < Christmas > is the user variable.

  I see that you can "change" the messages of success/failure via the control box on the screen of test results... but how do I insert the user variable, so the message says something like... Bravo < Noel >, you spent...

  Noel (in hope)

  Hi Noel,

  Published articles on advanced actions, using variables. A few months I am blogging about Captivate (for the most part about 5, but some comments apply to the 4 as well). Here is the link to my blog:

  lilybiri s posterous

  I recommend you start with the two reviews/articles on the variables.

  I know you dislike the CP5 and are still working with CP4. The user in CP4 for advanced actions interface is somewhat awkward (one of the reasons why I really appreciate more CP5). But in your case, it should work. Will try to explain the steps (if I could just insert a CP - SWF here, sigh!):

  1. Make sure you have the text entry box to request the name and associate it with a user variable p.e. v_Name
  2. Create the collar and the failure of the text in the slide in score captions; You can insert the username, by inserting the v_Name as explained by the other user. don't forget to put in invisible by using the properties. To better explain, I tagged FailText and PassText legends
  3. Create an advanced action (see screenshot):
     1. Project, Actions, tab advanced; Actions Create a new action; the label of the action, e.g. TestScore
     2. Double-click Add statement, you will see a red "declaration", open the drop-down list by using the SPACEBAR
     3. Choose Condition, pane will fill with a whole bunch of lines which are the structure of a conditionial statement
     4. Click on the first red 'Select a variable' and use the space bar to open the drop-down list
     5. Scroll down to cpQuizInfoPointsScored and select
     6. Open the drop-down list "is equal to" using the SPACEBAR (may be it opens automatically) and choose ' greater than or equal to ".
     7. Open the drop-down list for the third (able to open automatically too) and choose 'value', you'll be able to type in the required minimum score (I put in '12') - your report is created
     8. on the third line, under Begin, select and open the drop-down list with the space bar, select action Standard, then choose show, in the object list, you choose PassText
     9. similar workflow after otherwise, Begin, but now show FailText
     10. You don't have to bother on the statements to add superfluous, they will not disrupt your script
  4. Go to the slide of Score, open its properties and change the action on enter to "Action run advanced ', choose the action you just created TestScore
  5. Try previewing

  Try it, Christmas, simple tip action can really extend the possibilities of Captivate - but are much easier to CP5, don't shoot me please!

  

• I show is no longer a notice that allow me to block or approve remote content in individual e-mail messages. I would like to receive the restore function. How?

  This "menu" was automatically appear. He stopped to show. I want to restore it. (Also, why he stopped showing?) A thought, I recently changed my setting re. accept cookies. Now I wonder every time if I allow or refuse them. Would that have something to do with the menu remote content stopping...?)

  It looked like this:

  Edit Remote preferences
  allow remote content for xxx@xxx
  always allow remote content to xxx@xxx
  etc.

  The current version should display the following message with a remote content.

  "In order to protect your privacy, Thunderbird has blocked remote content in this message.
  There will also be an 'Options' button next to the message.
  Click on the 'Options' button to get a drop down menu.

  • "Display remote content in this message.
  • "Change the remote content options.."
  • "Allow remote content to the e-mail address.

  If Thunderbird still seems to be allowing remote content, check the settings:
  Tools > Options > privacy
  or
  Menu icon > Options > Options > privacy

  Under "Mail content.
  Do not select the checkbox "allow remote content in messages.
  She should not be selected by default.
  To check all the exceptions that you have already set up, click the 'Exceptions' just right

• Fed up with Mail. When I open mail it says it is downloading the messages, it can be 2, 3 or more and that is true for a long time. I have to close and reopen to get the content of the messages. Often the mail charge the same messages.

  Fed up with Mail.

  When I open mail it says it is downloading the messages, there may be 2 or 3 messages to load and this is true for several minutes. While showing that it's always getting new messages, Mail displays the message header but not the content, I have to close to stop this lengthy process erratic and reopen it to get the content of the messages. Often Mail load the same message 2 or 3 times, even if I leave the app end its process, Yes, because sometimes it ends.

  Is there anyone who has the answer to this?

  I am seriously thinking of abandonment of post and take something else to manage my emails.

  Thank you for your community!

  You have created all of the subfolders of the Inbox for the account?

• How to stop the pop up message: do you want to add the _ directory to your search path?

  After you install LabVIEW 8.6.1f1 on a new PC, every time I choose one of my screws via her select a VI... palette, I get a pop up message saying: ' you want to add the "P:\CWalker\COREYs LabVIEW subs projects\Phoenix" directory to your search path?

  I've already added 'LabVIEW P:\CWalker\COREYs subs projects\Phoenix' in the option search for VI and restarted path LabVIEW, but the message does not appear.

  Yes, this is how I added the directory.

  Since then, I managed to stop the pop-up message.

  Of course, I had deleted some of the default values, such as "-*" of the VI option search path and that caused the popup message.

  Thank you!

  Corey

• Why do I all of a sudden the disturbing message: "Do view you the contents of the Web page which was delivered safely?" etc. "

  What happens here?  At the opening of some of my programs I suddely the message:

  "Have you added to viiew only the webpage content that was delivered safely?".

  I thought that using the protocol HTTPS is safe for all it's content.

  What must I do tget rid of this disturbing interrupyion and still be safe.

  Thank you

  Jim Bachner.

  Hi Jim,.

  First of all, this is not recommended.  While I'm going to show you how little (after the second break), it is not really a way to remove it AND be always careful.  Its purpose is to protect you since removing the method by which the notice appears, you remove the security it provides as well (but I'll tell you anyway, and you can choose to follow the advice not to do or risk of your computer and the security of your computer and personal information that the decision belongs to you).

  ***********************************************************************************

  But first, here is a slightly modified to pay tribute to this topic, by Rob Koch you need to keep in mind:

  This message was created because the content of the site should never be mixed in the first place. This is extremely bad design and shows a cynical disregard for designing a secure web site. It is often the result of sloppy either coding or, more often, a lack of server resources in order to support the SSL of the images or other content [often third-party advertising].

  See this blog page for a brief discussion of this and how developers should determine the cause of this on their pages of 'trust '.

  http://blog.HttpWatch.com/2009/04/23/fixing-the-IE-8-warning-do-you-want-to-view-only-the-webpage-content-that-was-delivered-securely/

  And here is the official Microsoft article, please read the whole thing to see why they suggest you do this. When they mention 'secure content', think that name to username/password or other form data as info credit card on the same page where you let this mixed content.

  http://support.Microsoft.com/kb/2625928

  You must consider the dangerous site and not to provide any information of nature personal or even use the site at all if possible. If you need to use it, they should complain to the site management on the shoddy security methods so developers or other responsible for this pressure of receipt of choice to improve aspects of the security of their web site.

  ***********************************************************

  If you decide to ignore the advice and do it anyway, you'll be surprised when you see how easy it is. And it's the job of the IE and not of MSE.

  In Internet Explorer, go to Tools / Internet Options / Security / custom level. Scroll down to "Display mixed content" and change it to "Enabled". Click OK and then again click OK, and then close all tabs and Windows Open IE. That's all.

  The next time that you open and use IE, you will never again see this notice.

  I hope this helps. I am pretty sure it will solve the problem and pray that if you do, you are causing yourself even worse problems well beyond the simple discomfort, it's now.

  Good luck!