I have an audio bar that I need help for connection
I was given a computer from a friend. It is a Dell with a Dell monitor & bar audio. The audio bar has a cord with a series male connector 9-pin. The soundcard on the computer has 26 pins taken on this & I guess she must have and adapter to be connected, but have searched the Internet and have not found a. She told me that she uses this bar with his computer, but is not what I need to plug it.
Thanks a lot for all your help. I appreciate it. I guess we can close this now.
Tags: Dell Desktop
Similar Questions
-
Need help for connection of 3 options A, B e - Cp 6
Captivate 6.0.1.204
I use for my project of branching, but I ran into an issue.
I have a slide with 3 options button:
- Key 1: Watch A slide group
- Once they are done watching slides of Group A, they jump to slide to the last section of the project (jump Group B)
- Key 2: B Group Watch slides
- They jump Group A and once they are made to look at slides of Group B, they go to the next slide (which is the last section of the project).
- Button 3: Look at both group A and B slides
- Here's the problem: since I was jumping the action drag on the last slide in Group A to jump Group B, user can not play the right presentation without having to jump.
The workaround I found was to reproduces all the slides in A group and do another branch of the exact same group that everything continues (without no Action to jump on the last slide)... but this makes the file really big size (right?). I should be able to do it without having to duplicate the slide.
Any suggestions on how to make this work?
Hello
Talk about 6.0.1.240 I think (small fault of strike).
It will be necessary to have a user variable, follow the option that was chosen. And then add an action parole at the end of the Group A, in which you check the value of this variable and jump on the slides in Group B (if the variable A) or any simply continue.
Steps to follow:
- Create a v_choice user with a default value of 0 variable
- 1 Add an advanced standard action button which assigns the value of A v_choice and jumps to the first slide in the Group's
Assign the v_choice with A
Jump to slide A_first - 2 Add an advanced standard action button which assigns the value of B to v_choice and jumps to the first slide in the Group's
Assign the v_choice with B
Jump to slide B_first - 3 button can have just the simple action that you have at the moment.
To the event by leaving to the last slide in the Group A, you need to add this conditional action:
IF v_choice is equal to A
Go to Slide_End
ON THE OTHER
Continue
Lilybiri
- Key 1: Watch A slide group
-
Hello
I created the database using Oracle "Database configuration assistant tool" and I provided values such as
for password:Abc@123456
SID: testdb
Database name: testdb
and selection is still accepted as default value provided by the tool.
Now when I try to connect to the database using "sql developer" credentials that I use while creating a new connection is:
connection name: testdb
username: testdb
pasword:ABC@123456
HostName:localhost
Port: 1521 (Default)
SID: testdb
Lifted on test error: ORA - usename/password 01017:invalid: connection refused
Can someone help identify my incorrect steps:
Concerning
BeatThere is a gap b/w sqlplus and / as sysdba
sqlplus / as sysdba
C:\Users\niketk>sqlplus / as sysdba SQL*Plus: Release 11.2.0.2.0 Production on Thu Jan 17 19:44:34 2013 Copyright (c) 1982, 2010, Oracle. All rights reserved. Connected to: Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production SQL> alter user hr identified by password account unlock; User altered. SQL> exit Disconnected from Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
-
Currently, I own a copy of Indesign 8.0 and have a new computer that I need to install it. It has been removed from my old computer. Where can I download this version?
http://www.Adobe.com/downloads/other-downloads.html can help
-
I have an account and have paid for an upgrade of Adobe Acrobat which when I re - download tells me that I have no serial number correct - I need help and am going in circles using the Adobe site - I spent hours trying to get help
you're right about s/n Oops! It was the latest version that I downloaded on the site last week - Acrobat X Standard, that's what I had bought before, and s/n does not. I changed computers and need to download again on the site and at the beginning of all this trouble. I couldn't see an Acrobat X - just the Acrobat 9... I myself am confused! I will go back and check again... Thanks for all your help with this!
-
I have a pdf file that I need to copy and insert the pages several times. What subscription service I need to be able to do this?
Hi barbaram78653400,
If you want to copy PDF pages into a PDF file, you must use Acrobat. See this help document for instructions: Adobe Acrobat X Pro * rearrange pages in a PDF document (these instructions apply to the XI Acrobat as well).
If you do not have Acrobat, please do not hesitate to give it a try. You can download a free 30 day trial of http://www.adobe.com/products/acrobat.html.
Best,
Sara -
I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there. I use a hdmi cable that has worked for me before. Any suggestions?
-
I have a new computer and I need help, download of lightroom to my new computer. I also want to upgrade to the latest version.
Hi Giovanniv,
Please download and install the updates for Lightroom from following link: keeping up-to-date for Lightroom
Concerning
Tanuj
-
my computer crashed and I am trying to reistall elements 9. I downloaded it and I have my serial number, but I need help
Download and Installation Help-
-
Hello, need help for Adobe Reader DC playing animation files that are specified in the pdf output by script Latex Beamer. My Adobe Reader DC refuse to open any format that I gave him. Thank you very much
Hey ihorl18351266,
Please note that you can open PDF files using only the CD player. Any other format will not be supported by the software.
Kind regards
Ana Maria
-
Need help for optical safety circuit.
I buy these parts and prototype with real components, but since I multisim, I thought it would be nice to create the circuit and maybe work through issues I can practically.
I need a circuit that takes 120 VCA, generates 5 VDC and 1.5Vdc power of optical transmitter and receiver. I actually use a data port because he has great range and is pretty cheap. Rather than send the binary code well I just send a light stead that is broken or not broken through doors and windows in my house. Then the receiver sees this as an entry and order a relay.
I tried several voltage regulators that come with multisim, but I get an error of execution of my circuit. Really I can't the 120 VAC to power levels necessary for the functioning of the optics.
Otherwise I might want to run on a system 120Vdc with battery backup, so throw a 120Vdc up to 20 v DC switching power supply - but I have not found a SMP in the library which takes 120 as input and as output 20.
Basic plan: 120VAC source-> transform to 24Vac-> Full bridge rectifier to ~ 20 v DC-> voltage capacitor filter on the input of two voltage regulators (1 to 5 VDC, 1 to 1.5Vdc) - then circuit since the two power supply of the transmitter and the receiver.
I just need help for 5V and 1.5V, from there, I know that the real world circuit will work component tests already carried out. Thanks for reading.
I didn't Multism so I can't advise you on the compatible models. I ran the model on semiconductors with slight modifications of format on my SPICE simulator based on Berkeley Spice 3f5. I had to change the format of model resistance semiconductors appeal but has not changed any values.
The output of your power supply circuit 3 (with 5 V, not the 1.5 V regulator regulator) was 4.99995 V.
There are a few messages about changing templates published for compatibility Multisim woth. You can search those to see if there are any suggestions on what you'll need to fix in the model.
Lynn
-
I need help for the upgrade of my current system.
I need help for the upgrade of my current system.
I have SBS 2008 with (Exch 2007, SQL 2005, Sharepoint, backupexec 2010 for sbs) licenses.
I want to make the larger environment using the following:
(1) apply Virtualization
(2) apply to the failover process (clustering)
"(3) the environment must support adding server terminal server, ERP server, exchange server, domain controller, backup manager.
Storage 4) that supports Raid (1 and 5)
UTM excellent 6) that supports (SSL VPN, VPN Global)
suitable backup solution 7)
(8) good antivirus for clients
my questions:
(1) can you provide me with a good design for this environment
(2) should I choose what operating system:
Microsoft datacenter or company
I know datacenter provide us the unlimited VM but needs per processor license
so if I have two Grouped servers I want to buy 4 licenses
and just 4 VMs per company license... to say that we have two servers and maintain 8 vms so wat happened if 1 goes down... How can I migrate the 4 virtual machines on the server failed to another server group... ? should I buy enterprise license?
(3) if I get the SAN storage for data... How can I save this storage... should I get another SAN?
(4) how can I upgrade SBS stad single server (windows standrad) without losing the licenses as Exch 2007, SQL 2005, sharepoint.is it a must to buy an edition full std server or there is a way to upgrade (license wise, I mean)?
(5) what about win2k8 license for VM:
lets say we have physical that has windows license so that enough to have windows for VM or should I buy windows for VM licenses?
(6) can I use backExec license for SBS with windows 2008 standard
(7) who better to virtualization AMD or INTEL
(8) hyper V or VMware?
(9) what of Microsoft data protection Manager... is this good?
(10) what virtual machine manager? What are the benefites keys
Thanks in advance
Hello AnasAI,
You can find the Server forums on TechNet support, please create a new post at the following link:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
I need help for activation of the real administrator account.
I have a problem with Adobe reader 9 standard, Adobe customer service asked the unhide real administrator account before you can continue to help me.
I need help for that.
http://www.Vistax64.com/tutorials/67567-administrator-account.html
Read the above info.
See you soon. Mick Murphy - Microsoft partner
-
I need help for my reader to USB drive on my windows 10 ACER?
I need help for my reader to USB stick on my chrome windows 10 plug ins acer. Can you help me?
What Adobe application that you use?
This is the Adobe Media Encoder forum, and you did not mention anything on this subject. If you can let us know what Adobe application, you need help, we can help you make the right forum.
Thank you
Regalo
-
I need help to connect my iPhone apps on El Captian Office
I need help to connect my iPhone apps on El Captian Office
Without knowing exactly what you're trying to do, this article from Apple can help:
Continuity allows you to connect your iPhone, iPad, iPod touch and Mac - Apple Support
Maybe you are looking for
-
where is my files - don't laugh :-)
I have Mac Mini with OS X server, upgrade to the latest version and a bad administrator (me :-)) In server Admin, in file sharing, I shared a little some records are Some are directly drives (3) except for one... Carrier of the called party, the path
-
Cluster 2 nodi + batteria Hdd-3XNSB2J (8565682699)
Seguito ad a software problem abbiamo la auswechseln uno dei 2 Nodi del Cluster, ora pero non riusciamo a farlo riconoscere dalla batteria di HDD connessa in Fibra Ottica. Few need di UN supporto tecnico. Grazie Francesco Falcone - Assistenza Tecnica
-
In the Contacts file, cannot create new contact groups
The menu instructions help to declare the following: in the toolbar, click New Contact Group, type a name in the group name box and then fill in the tabs of the Contact Group and contact information group. You do not have to fill in all the boxes; Ju
-
I have a problem with the bluetooth on the computer being lost.
Hello In a search of my volume indicator I refresh my settings of the icon as expected my instructions from microsoft. But now my bluetooth icon is missing. Pls help for the same thing. Mine is series of Acer laptop Aspire E1-531. Concerning
-
Hello Is it possible to use HSRP/VRRP internal router if you want to have redundancy between two interfaces? Our client has a router with two Ethernet interfaces. This two interfaces are connected to two switches, there is also a cable between switch