Judgment on his own computer. Get the stop error message: 0x9C

Similar Questions

• CS6 on Windows 7, when I try and send my project Adobe Link, then I still repeatedly get the error message "still has stopped working, windows closes the program.  I get the same error message when I try and open again on its own.  Help Woo

  Also when I open again as a standalone program, and when I try and export my work via Adobe link to send to again, I get the same error message - "Adobe Encore has stopped working.  Windows will close the program.  Help would be really appreciated.  Thank you.

  Run 'as administrator' If your account has administrator privileges or not.

  Let us know if that suits him.

• I have Vista Home premium and you want to install Windows Defender, but however get the 08x800106ba error message.

  I have Vista Home Premium sp2 and you want to install Windows Defender, but however Gets the 08x800106ba error message.

  Where should I go from here

  Hello

  You cannot install Defender in Vista; It is already part of the Vista operating system.

  Read about Defender:

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• I get the empty error message when clicking on "send & receive in Windows Mail.

  Original title: I receive a blank error message when you click "Send & Recieve" in Windows Mail.

  I recently asked a question in the Microsoft answer that I could access Internet Forum is no longer my favorites to Internet Explorer 8 (although they were always on display in the folder My Favorites in my user account folder.)  Several fixes to this problem have been proposed, but the one that worked was when it was suggested that I might have a corrupted user account.  I was directed to Microsoft link "How to fix a corrupted user profile." I followed the instructions and created a new user account and copied the files to the new account. Was done to correct the problem, and now I can access all my favorites still in IE8 in the new user account.

  However. I am now no longer able to send or receive messages in Windows Mail. When I click on "Send & receive" I get the box that says "some errors occurred while processing tasks requested. Please see the list of errors below for more details. "However, the box below which is supposed to list the errors is completely empty. I contacted my ISP (Virgin Media) provider, who did various diagnostic tests. They told me that this isn't a problem with their security, and they checked my account settings to make sure that everything is correct. They seem to think that this could be a problem with my registry. They sent several messages test (arriving in my web Virgin Media mail box), but for some reason are not getting downloaded in my Windows Mail. On a few occasions did pass the test messages (but only after I closed Windows mail and then reopened.) However, Windows Mail has stopped working again.

  Just once, I got details of an error that has been ' ERR protocol error. Port 110, secure (SSL): 0X800CC90. 0x800ccc18 error number. "However, it was the only time. All other times, the error box is completely blank.

  I would be very grateful if someone could help me solve this problem.  I'm very IT limited knowledge.

  Cody

  I looked in the links provided by Karena & Bruce, but they did not provide a solution to my particular problem.   I must say that I have noticed some improvements to Windows Mail but the button "Send & receive" still does not work properly. I can now send and receive messages.  If there is no message on my e-mail server of the Virgin, access automatically when I open Windows Mail. However, if a new message is sent to me and as I click on "Send & receive" Windows Mail is already open on my computer, I always get the empty error message. The only way I can access the message is to close Windows Mail and re - open once again, when the new message is downloaded automatically. I found a link that says this error could be due to a duplicate news account.  I found that I had two ms.news accounts in my Windows Mail account and remove one of them.  However, this has not resolved the problem, and I'm still only able to receive new messages by the opening and closing of Windows Mail.

  Does anyone have any other suggestions?

• When I try to send emails via outlook express, I get the following error message:

  When I try to send and email using Outlook Express, I get the following error message:

  The connection to the server has failed. Account: 'HotHot', server: 'smtp.live.com', Protocol: SMTP, Port: 25, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E

  Any help gratefully received. David

  Ok thank you. I received three messages from you, two of the demon and the other Hotmail.

  Hotmail has helpfully includes the originating IP address, so I was able to check further. There is no WHOIS data for it (a bad sign to start), but it is not in the CBL. Read this page to see why it is listed and take the appropriate action. Once you are convinced that your computer - and another using the same network - are clean, you can use the link at the bottom of the CBL page to remove from the list the IP address.

  I still don't know where FCMA comes into it, and diagnostic tests in the NDR is incorrect. It is not the content of the message that is at fault, but I suspect that the block list.

  Good luck!

• While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language.

  KB952155 Setup Error.

  While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language. Now, that - what it means and how can I fix it? I have installed SP3

  Eivind Aakhus Hello,

  If you have the latest version of Office installed on your computer remotely, then you need to enable the Active X control.

  Follow these steps to activate the ActiveX module.

  a. open Internet Explorer by clicking the Start button, and then click Internet Explorer.

  b. click Tools, point to manage add-ons and then click Enable or disable add-ons.

  c. in the list view, click to view all ActiveX, ActiveX controls downloaded controls.

  d. choose the one you want to activate, and then select Enable.

• I can't receive emails on Outlook Express. Get the 0x800C0133 error message number.

  I can send and receive Outlook e-mail messages and can send emails on Outlook Express, but cannot receive them on Outlook Express. Get the 0x800C0133 error message number.

  I can send and receive Outlook e-mail messages and can send emails on Outlook Express, but cannot receive them on Outlook Express. Get the 0x800C0133 error message number.   Problem seems to be with the program Outlook Express and think I need to reinstall.  How do you do that?
  Error number: 0x800C0133 = a corrupt Inbox.
   
  Move any message you want to save to a local folder that you create. Then, remove the problem of Inbox as follows.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
   
  With OE closed, find the box of Inbox.dbx and delete it. Another will be created automatically when you open OE.
   
  General precautions for Outlook Express:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

• Sunday 15 May 2011 after trying to use Microsoft Update why I get the following error message? [Error number: 0 x 80070020]

  Sunday 15 May 2011 after trying to use Microsoft Update why I get the following error message? [Error number: 0 x 80070020]

  Hi MikeGoodold,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

• I'm trying to access a wireless network with the password provided for me. I get the following error message

  I'm trying to access a wireless network with the password provided for me. I get the following error message: "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 characters ascii or hexadecimal 10 or 26. "what does this error message mean and how do I address so that I can access the wireless network?

  I use XP Professional with service pack 3. I get this error message every other time I try to log in to a protected wireless network security. I used to not get this message; but, now, it may be impossible, sometimes to call all wireless providers when I might only need for a short period or after hours service opening.

  In addition, it is my computer that requires the network password to be different, not the provider of wireless. A password is given to me who works for other users, but my computer won't let me use it.

  Hello

  I suggest you to visit these links and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/the-network-password-needs-to-be-40-bits-or-104/f3fdc3ee-CB40-4107-A632-082093dcdcb8

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/need-to-connect-to-home-wireless-network-Windows/5bf37a22-cc42-4a0f-9d15-83e780f00123

  It will be useful.

• When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. »

  original title: could not copy files

  When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy.  The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory.  How can I fix it?

  Hi GloriaZF,

  What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.

  You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.

  I hope this helps.

• User profile service: when I click on my user profile, I get the following error messages: the user profile service service failed to connect. User profile cannot be loaded.

  When I click on my user profile, I get the following error messages: the user profile service service failed to connect. User profile cannot be loaded.

  Isn't that one profile, the administrator and another account are ok

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947215#letmefixit

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• I try to upgrade to Windows 10 and downloading still failing. I get the following error message: 802400B,.

  I try to upgrade to Windows 10 and downloading still failing. I get the following error message: 802400B, which means that it can not read one of the files required to download (update manifest). The recommended windows fix did not work. What should I do? Thanks for any suggestions you may have.

  You can try the upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• I get the same error message and cannot open a PDF file

  I have a link to an application that I am trying to download and complete. By default the link my browser to open. what he does normally. However, this document was a mistake. He said that I need the latest version of Adobe. So I downloaded the application, open the PDF file in the app and get the same error message. Help!

  Hello

  You see the following error message when you open the PDF document?

  

  If so, it is a special type of PDF created with Adobe LiveCycle Designer form called "Dynamic XFA".

  Acrobat Reader mobile apps (for iOS, Android, Windows Phone) do not support XFA forms.

  Please download the PDF document on your Windows or Mac computer and open it with Acrobat Reader DC desktop version.

  Please let us know if you have a different problem.

  Sorry for the inconvenience.

• I downloaded creative cloud, Dreamweaver and Muse.  I get the following error message when you try to run Dreamweaver: '... Unable to start properly.  0xc000007b'. Muse started ok.

  I downloaded creative testing Cloud, Dreamweaver and Muse.  I get the following error message when you try to start the Dreamweaver application '... Unable to start properly.  0xc000007b'. Muse starts without a problem.  Is there something wrong with the download trial of Dreamweaver or is it my computer?  I downloaded the Windows 7 premium, Intel, processor Pentium B940 2.0 ghz, 4 GB ram, 64-bit operating system.

  ... 07 b problems http://forums.adobe.com/thread/1355374?tstart=0

• I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and I was tol

  I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and they told me there is a problem with the .pdf application and I need to contact Adobe Acrobat. This can be corrected?

  uninstall any version of acrobat is installed.

  clean by Download Adobe Reader and Acrobat tool - Adobe Labs

  Restart your computer.

  delete all to delete pdf files.

  If this fails, it is a problem of ms.  If this attempt is successful, then reinstall your acrobat.