Addition of VMs in the inventory for the updating of the Site DR

Similar Questions

• adding existing additional new page to the site

  I built a single page in Muse I want to add to an existing site.  How can I tell the new page appears in the mydomain.com/newpage and not not not to replace all of the existing site?

  THX!

  Charlie

  Where is the index.html page for the site that was already there? The new folder that you add must be in the same folder with this index.html file original in order so that it can be served at the URL www.mysite.com/newfolder.

• In the treatment of the Upload, I have a progress in inventory for 11 days

  Hello

  In the treatment of the Upload, I have a progress in the inventory for 11 days.  I think it might be hung.  I already have another inventory, but it might stop the others for the last 2 weeks.

  Thank you

  Clark Collins IV

  SWN

  Hello Clark,.

  We have experienced some problems at that time load balancing, resulting in several clients pushing multiple downloads, which has compounded the problem. Dorsal team is actively addressing the issue. We ask that you not in additional downloads queue until it completes the process.

  Thank you.

• Condition of additional results work does not correctly for the parameters

  TestStand 2014

  Trying to connect a parameter only if the status of the step is "failure" will not save the setting when the step will actually fail.  On the other hand, variables with the same State will record very well.

  The sequence attached illustrates this.  Basically I have a sous-suite that returns a random number and a string as parameters.  I use the random number to evaluate against my limits for the test call.  I want to save the parameter of string only if the step fails.  So I put as an additional result, then assign the condition

  Step.Result.Status == "failed".

  The data never show on the report.

  But when I put a result additional explicit with the same local variable and put the same exact condition it appears on the report when the step fails.

  I'm puzzled as to why settings will not open a session to this condition, but additional explicit results work fine with the same State.

  Any thoughts?

  Thank you

  Condition for additional result of the parameter is evaluated before the State sequence is set to failure. The 'out' parameter additional results are evaluated probably just after the code module, so if the status of the step is not changed by the call of code module, then it will always be "Running".

  I can see how it would be nice if it worked the way you ask, but keep in mind for input/output parameters it is usually the same expression/variable to both the 'in' and 'out' additional result, so it is important to the time at which the result is recorded. It must be done before calling code module for 'in' settings and after the call of code module to 'out' parameters to reflect the State of the variables to these points in time. I think that the intention is that the additional result for settings must reflect the State of the variables at the point in time immediately right before the call for 'in' settings and immediately after the call to 'out' parameters So if you want to connect under certain conditions a value based on the status (where the State is not changed directly by the code module), with the help of a result extra ordinary as you discovered is probably the best way to go.

  Maybe for the parameters we might delay logging to the end, but which may result in a change of behavior if the variable state changes again once before that. If you want us to consider or have another idea for how to handle this better please let us know or maybe post something to the exchange of ideas.

  Another possibility is that we could temporarily connect the results before and after the code module, but then not assess the condition to the end and throw the recorded result if the condition is false. Who can still cause a change in behavior although if "Value of Log" expressions have side effects.

  Hope this helps clarify things.

  -Doug

• Failure of the load of the inventory... OPatch failed to load the inventory for the Home.OPatch Oracle data failed with the error code = 73

  Hello

  I will apply patch bundle and my oracle database 11.2.0.2 and Microsoft Windows x 86 platform. As read the file Readme Oracle recommends to use OPatch utility version 11.2.0.1.3 or later. To check the inventory availability I use the command lsinventory % ORACLE_HOME%/OPatch/opatch.

  It ended to give details below.

  Citing O 11.2 patch .0.1.1

  OPatch could not create/open history for writing file: * my home oracle path***\cfgtoollogs\opatch\opatch_history.txt

  **ORACLE_HOME***\cfgtoollogs\opatch\opatch_history.txt (access is denied)

  Setup Oracle interim Patch version 11.2.0.1.1

  Copyright (c) 2009, Oracle Corporation.  All rights reserved.

  OPatch could open the log file, the recording is not possible

  Home Oracle: *.

  Inventory Center: C:\Program Files\Oracle\Inventory

  from: n/a

  OPatch version: 11.2.0.1.1

  YES version: 11.2.0.2.0

  YES location: * ORACLE_HOME * \oui

  Location of the log file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch2015-04-09_16-27-49PM.log

  History of patch file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch_history.txt

  Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home.

  LsInventorySession failed: LsInventory failed to create the log directory * ORACLE_HOME * \cfgtoollogs\opatch\lsinv\lsinventory2015-04 -.

  09_16-27 - 49 PM .txt

  OPatch failed with error code = 73

  Can someone please help me solve this problem?

  Do I need to install the last opatch utility?

  Hello

  This error message " LsInventorySession failed: LsInventory failed to create the log directory * ORACLE_HOME * \cfgtoollogs\opatch\lsinv\lsinventory2015-04 - .

  09_16-27 - 49 PM .txt "

  indicates that you have a permission problem with your file systems: cfgtoollogs/ORACLE_HOME/opatch

  Check the owner of this file system.

  Kind regards

• FQDNs for ESX environment when DNS servers are VMS within the ESX environment

  Hello

  I was wondering,

  When the implementation of a new infrastructure from scratch, with an ESX cluster from scratch

  and when the servers DNS themselves will run inside the cluster,

  Then, it is advisable to use IP addresses instead of the domain name COMPLETE for the right ESX environment?

  Here's what I've done so far:

  -installed 1 ESX host

  -installed donain controller as VM

  -installed PSC and VCSA

  -created the new cluster

  -installed the second ESX host, added to the cluster.

  I installed a VM DC as the first thing after the installation of the initial ESX host, I could have started using the domain name COMPLETE for the ESX environment at this time.

  However, I didn't do it.

  For installation of the VCSA and when you add ESX hosts to the cluster, I used IP addresses instead of the FQDN names.

  It seems stupid and dangerous for me to use domain COMPLETE the ESX hosts themselves, because the domain controller is running in the cluster.

  So I used IP addresses only to ensure the ESX HA cluster and the characteristics of heartbeat stay ok if something were to happen to the DNS server.

  However, the VCSA installation and when you add hosts to the cluster,.

  the MISTLETOE gave me a warning, indicating that it is preferable to provide a FULL domain instead of an IP address name.

  I am of the opinion that if you have no physical DNS servers, it is not a good idea.

  My opinion is that when your nameservers inside the ESX cluster itself and you do not have 2 redundant external DNS servers, so it is not wise to use the FQDN for your ESX hosts, PSC and VCSA setup.

  In my view, using the property intellectual property is much safer in this case.

  I was wondering what is your angle on it.

  Do you see the same way, or have different opinions?

  Hi smetter,.

  It is advisable to have a working DNS for vSphere environment however the use of DNS for things like vSphere HA have been removed in more recent versions of the product. Refer to the section of the guidelines of the general network of this document for more details: https://www.vmware.com/files/pdf/techpaper/vmw-vsphere-high-availability.pdf

  With this in mind I wouldn't be worried about use of FULL domain for the addition of services like the ESX host, etc.. Failure where HA would be restarting the virtual computer, there is no dependency on DNS so it will continue to work as expected and, subject to the availability of resources the virtual machine starts on another host.

  According to your vSphere licenses, you may also like to consider the implementation of anti-affinity DRS VM to keep your DNS Appart servers and on different hosts. This can prevent your servers DNS are declining when the failure of a host. You must have Enterprise edition or later for this.

  Kind regards.

• I would like to stop my paid subscription to Adobe, the creative cloud because adobe does not work on my computer. In addition, it is not possible for me to stop my subscription on the site, because it does not show I have this subscription. That's why I

  I would like to stop my paid subscription to Adobe, the creative cloud because adobe does not work on my computer. In addition, it is not possible for me to stop my subscription on the site, because it does not show I have this subscription. That's why I need to helo, please, thanks :-)

  Hi Stephanie,

  Please let us know the problem you are having with your Adobe Creative cloud so that we can fix it for you.

  For cancellation requests, please contact customer service.

  Reference: cancel your creative cloud membership

  Kind regards

  Sheena

• Failed to load LsInventory... OPatch failed to load the inventory for the given OH

  It is a RAC configuration, but I think it's more a problem of data General. I have 2 nodes on Windows 2003 x 64 - 11.1.0.7. I was installing the CPU from July to help migrate all my apps to node 2, down node 1 and connecting, start node 1 and migrate the applications out there, then patch node 2.
  
  Well due to my inexperience with RAC, I ran the opatch apply, but has not used the local switch. When he had finished with the House, he asked me if Node2 was ready for the CRS patcher. I pressed N to say, it was not ready, and then he asked me want to continue. Well, since I wanted to keep saying no I say Y. It was bad and he began to copy the files to the remote host. I panicked and hit CTRL-C to kill him before the end of my apps that everything came down and around the world. I thought I did, so I finished patching Node1-CRS-ASM-DBHOME - and brought upwards.
  
  But when I went to the node 2 patch he had problems. This is the error:
  
  OPatchSession could not be loaded for the given Oracle Home inventory
  C:\oracle\product\11.1.0\crs. Possible causes are:
  No permission to read or write to ORACLE_HOME/.patch_storage
  The central inventory is locked by another instance YES
  Without the permission of reading in the Central stock
  The locking file exists in ORACLE_HOME\.patch_storage
  There is no such thing as the Oracle home in the Central stock
  
  ApplySession failed: ApplySession could not prepare the system. Failed to create patchObject.
  System intact, OPatch will not attempt to restore the system
  OPatch failed with error code = 73
  
  All permissions are good. I have even set them up to allow everyone (temporary) control to ensure that total. There is no file locking. The inventory.xml file is exactly the same as on node 1. The only thing that I can't solve the problems is if the inventory is locked by an other YES but I checked both nodes and there is no YES currently running process. I restarted the node 2 to kill anything useless. I don't have after the installation of node 1 because I would plan a failure.
  
  The OPatch logfile on node1 has some mistakes YES where I canceled the node2 patch. Nothing that stands to be a killer of inventory for me.
  
  GRAVE: YES-67073 ApplySession failed
  YES-67081 OPatch could not propagate the patch for remote nodes
  
  I read a note where someone just copied the folder oneoffs node1 node2 and it sets something similar, but that has not worked. I rename my inventory and recreated folder attachHome.bat in the ORACLE_HOME\oui\bin directory, but that did not work. Same mistakes lsInventory. Anyone has any ideas. I have a beautiful SR with Oracle since Friday but they requested that the log files and I have not heard anything. I don't have a system to test CARS so I'm stuck sort of until I get this resolved. I appreciate any help or suggestions.

  Hello

  Try to restore the patch on node 1 and then try to apply again.

  Concerning

• Why can't the upgrade procedure be re-scheduled to warn users BEFORE they upgrade they will lose the additional features they have relied on for years? This isn't a trivial matter - read the other "complaints"!

  For the second time in my experience, an update of Firefox led to a lost feature where the modules are considered incompatible. It is UNACCEPTABLE that the user is not warned prior to this loss. It is immaterial that the Add-ons are third parties: If Firefox can 'discover' the problem AFTER the upgrade, it can warn us BEFORE the upgrade. I love Firefox, but you've already lost one of my sons as a user because of what it sees as a casual disregard for the personal choices of the users. Give us the ability to customize Firefox. Fantastic! Can paralyse us when we innocently do a upgrade. How much more of your user base that you want to lose?

  As a user of long date of Firefox (and Netscape), I tend to agree with you that some type of compatibility check must be done before the real Firefox takes place version upgrade. I never install a new version of Firefox on my previous version. I admit that I'm a more experienced user and generally start to use new versions of Firefox during the beta test period and install the beta version, with a separate profile required, to test the new product and test the compatibility of the add-on. I know that's not possible or convenient for all users.

  The following extension can save you some frustration.

  • It adds an option "Empty list" on the screen Add on
  • It will show compatible Mozilla products and versions for each Extension.
    • I do not believe that the Extensions installed from other sites that the site Mozilla Add - ons are included; you will need to check the site from which you downloaded the Extension or with the developer of the Extension for the updating of the plans for the new version of Firefox.
  • I installed it and I use it as a first step before contacting the developers Extension and or visit their home/forums pages looking for beta versions of their Extensions for new versions of Firefox.
  • This will help you if you do not allow automatic updates of Firefox; most versions of news (e.g., Firefox 3.x of Firefox 4). See:
    • https://support.Mozilla.com/en-us/KB/options%20Window%20-%20Advanced%20panel#w_update-tab

  Extension list Dumper: https://addons.mozilla.org/en-US/firefox/addon/extension-list-dumper/

• Can I get the Firefox search bar for not automatically, go to the site of the search engine I spend?

  The Firefox search bar seems to have changed since the last update. I understand that things are changing constantly and get used to them, but I wonder if it is possible to change the rear bar to the way it was, or at least understand why it changed.

  Basically, I used to be able to switch from search engines by choosing from the drop-down list, and would not put me right at the site of this search engine. He didn't actually bring me to the site once I hit the search button (or enter). It's quite annoying to have to remember to open a new tab before changing search engines in order to avoid sailing away from the tab that you are currently on, and it's also annoying that when you open a new tab and change the search engines, you are immediately taken to the site of this search engine. It feels like an extra step (ranging from 'the empty tab search engine page to search result' instead of 'empty tab to search result').

  I know it sounds like a minor complaint, no doubt, but I'm really really curious to know why it was changed. More important, I want to know if there is a way to customize the way it was.

  Thanks for any help!

  Many users have been raising this issue. I mentioned the same question in this post here: https://support.mozilla.org/en-US/questions/1086138

  In summary, it seems that the Firefox team is not intend to bring back the ability to return to the old bar search, which was possible (but in a very biased way) in older versions of 42. For now, you can either:

  • Download module additional classic restaurateur theme to https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/?src=ss and then select the old search option
  • Go back to Firefox 42 and set the browser.search.showOneOffButtons property in Subject: config. However, with older versions poses a risk to the security that you won't have bug fixes provided with version 43

• Failed to check for an update. -Failed to start the windows Security Center service

  Well, as I want to check for windows update, it says that "Windows update cannot currently check for updates, because the service is not runing.» You may have to restart your computer. I alrdy restart my laptop several times that the answer is always the same. I think that this problem related to my service center of windows security. for some reason I can't why it may not be on. can someone help with the solution m.e? Thank you

  azbondz,

  In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have that one saved backup system, is there a reason to keep additional files prior to the last backup of system? I can remove them systematically?

  I run the Windows Image backup to a hard drive external on a weekly schedule. The result shows on the hard drive as "WindowsImageBackup\(User name)-PC\Backup (date) (number)"-currently about 80 GB (binary).

  I reserve about 135 GB of available space for backups of the system, so I save only the last backup of the system.

  So far, I have no problem with that.

  However, the disk hard, there is another folder '(USER NAME)-PC' & under which is a folder "backup of files (date) (number)" for each time that the backup system runs.

  These files vary considerably in size - for example, 1 GB, 12 GB, 22 GB. They delete or replace automatically - just, they accumulate.

  What I want to know is ~.

  What is the purpose\importance of these additional files?

  Since I only have a single saved backup, is there a reason to keep additional files prior to the last backup of system? I can remove them systematically?

  Original title: Windows Image backup

  Hello

  Thanks for the reply.

  File '(Computer name)-PC "contains the files necessary for the Windows. Data files saved in libraries, on the desktop, and if the Windows folders for all people with a user account on the computer are also recorded.

  [The default Windows folders include AppData, Contacts, desktop, downloads, Favorites, links, saved parties and searches.]

  The size of these files increases, because the content of the folders mentioned above increases.

  For more information, see the article mentioned below:

  How Windows selects the files to back up?

  http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-choose-which-files-to-back-up

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• BlackBerry smartphones can not remove an additional icon that resembles the icon browser (Earth)!

  Recently, an additional icon that resembles the browser (Earth) icon appeared in my icon page.  It says Mobile of NASCAR Sprint Cup, I don't even like NASCAR... lol... I tried, and if sprint technicians tried everything... Cannot remove it. We have removed the maintenance for this icon book and he returned whenever there is a reboot or battery pull. I tried to install it, hoping that it works... He moved says "error HTTP 404: not found.» This page you are trying to load is not found. Please try loading a different page.  That I have and that's technicians, we tried uploading directly from the site of sprint store, hoping once downloaded, this icon disappears... Then we could delete, but nothing. I wouldn't mind just hide this darn icon, but since it's appearance, it freezes a few apps. They sent me another one BB and the same thing appeared. I am at a loss... It's the sprint technicians. I want this icon... HELP Please

  I have this problem too, on the Pearl 8130.  My device is low on resources to start.

• How can I add a rule of outgoing traffic in the Windows Firewall for Windows Update?

  How can I add a rule of outgoing traffic in ICF for Windows Update?

  Please do not ask me to change the firewall policy. My default policy for outbound connections is 'block '. Many programs to connect to internet without attention users and consumes bandwidth so I limited firewall to block strategy, but the Microsoft Update or the Windows update service is not running.

  Please suggest the creation of a rule of outgoing traffic in "Windows Firewall with advanced security" to allow Windows Update.

  This is not a third-party firewall program.

  This is a duplicate of http://answers.microsoft.com/en-us/windows/forum/w/fw/7f9c04c1-5216-47d9-9de3-64cc19eb796d with an additional constraint of the firewall rule creation. My version was not on a list of exceptions. "Windows Firewall ships with this version of Windows and should already include these sites in the exceptions list.

  'AA '.

  Not a duplicate of the 2012 wire that was bound to win 7 and you are running 8.1 firewall should already have an update exception.  If it does not please a snip of the outbound rules in your next post.

• Need any additional configuration to achieve the TAF in 11.2.0.4 CARS with listener to scan

  Hello

  We have 2 node RAC database version 11.2.0.4 running on the Linux platform.

  There are 2 earpiece SCAN running on DB instead of 3, which have generally taken over by oracle.

  When an instance brought as scheduled activity sessions that connected to the same instance, receipt ORA-03113: end of file on the communication channel.

  They were doing a select activity in db.

  When the user is reconnected, he got connected to the available instance.

  input TNS which users use (description = (address = (protocol = tcp) (host = p1bds1d4 - scan.sldc.sbc.com)(port=1521)) (connect_data = (server = dedicated) (service_name = p1bds1d4)))

  Do we need to do additional configuration to achieve the TAF in 11.2.0.4 with earpiece of SCAN.

  Must we change tns to include the clause as "FAILOVER_MODE = (TYPE = SELECT) (METHOD = BASIC)(RETRIES=180) (DELAY = 5)?

  Help, please.

  Thank you

  Ashish

  You can activate the side JOB effective by adding a clause like that you suggest to your connection, but in an GI envirinment channels you normally would by adjusting how the service is registered in the OCR. Run

  srvctl change service h

  and look for the-e and - m switches.

  --

  John Watson

  Oracle Certified Master s/n