Failure of the load of the inventory... OPatch failed to load the inventory for the Home.OPatch Oracle data failed with the error code = 73

Similar Questions

• I'm downloads Microsoft failure. The error codes are: 641 code 8007641 and 8004ff01.

  I am running windows Vista Home premium 64-bit. Microsoft sends downloads that fail. The error codes are 641, code 8007641, code8004ff01. Also, I can't use my uninstaller. Help, please

  Don

  Hi Don,

  You can open elevated command mode prompt and do the following command.

  msiserver net start, and then press enter

  msiexec / unregister, and then press enter

  msiexec/regserver, and then press enter

  Restart the computer and try to install the updates.

• Installation failure repeated the error code Windows Update 80070643

  Repeated failures to install 'important' update of Microsoft Office 2003 on Windows Vista Edition family Basic. Difficulty she also failed. Error code 80070643. This can be corrected?

  Hello

  Try the steps mentioned in the link below and check if that helps.

  Windows Update error 80070643:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  Hope the helps of information.

• Pavilion M4C57UA Notebook: Windows 8.1 to 10 upgrade fails with an error code at the end of the treatment

  I tried to upgrade to Windows 10.  He went through the entire process, and after a reboot at the end he failed.  He sent this message:

  

  I searched in these conditions and could not find an answer.  My machine is new.  I have a lot on it did not install at all, thinking that it is better to wait until I got 10 Windows installed.

  Any ideas?

  "If you keep an open mind, life will give you more opportunities."

  No answers here.  Was not able to get a lot of help in other places online either.

  Finally, the "Get Windows 10" icon reappeared.  Apparently, Microsoft is mind boggling distribution.  I tried once more.  It seemed to go further this time.  But after an hour of treatment, I discovered that the system restored completely to 8.1.  Who does.  I'm done trying to upgrade.

  Honestly, all I see now about 10 Windows, I don't see any good reason to spend.  The missing "start orb" was an embarrassment, but I worked around it (shortcut keyboard is powerful, quick, so you can set "Programs" as part of Quick Launch toolbar").  It is easy to customize the interface of Windows 8.1, and it works reasonably fast without error.  I'll wait for Windows 10 has had a good year of validation by others before making the move, even if I miss out on the "free" update

• How to repair or reinstall the msi engine also what is the error code 2352

  I have problems when I try to download an update for my AVG security program.  It shows a number OXC0070643, MSI engine failure and the error code from 2352.  Any help is requested as the Microsoft site does not appear.

  Hi JohnThelma,

  1. Did you the latest changes on the computer?
  2. You receive error messages when updating security software AVG on the computer?

  The MSI engine is related to the Windows service installed on the computer, I would say that you the article below and try the steps mentioned, check if it helps.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  If the previous step fails then I would suggest that you post your query in the AVG forums for assistance.

  Installation error Code OXC0070643         

  http://forums.Avg.com/ww-en/AVG-forums

• OPatch failed with the error code 72

  Hello
  
  I try to apply the patches to the database, whenever I try to use opatch I get error below.
  ----------------------------------------------------------------------------------------------------------------------------------
  
  [oragold@apps OPatch] $ opatch lsinventory
  Citing O Patch 10.2 .0.2.0
  
  Interim fix installer Oracle version 10.2.0.2.0
  Copyright (c) 2005, Oracle Corporation. All rights reserved...
  
  
  Oracle home: /u02/oracle/PROD/db/tech_st/10.2.0
  Inventory Center: / home/oragold/oraInventory
  from: /etc/oraInst.loc
  OPatch version: 10.2.0.2.0
  YES version: 10.2.0.2.0
  YES location: /u02/oracle/PROD/db/tech_st/10.2.0/oui
  Location of the log file: /u02/oracle/PROD/db/tech_st/10.2.0/cfgtoollogs/opatch/opatch-2009_Mar_30_16-28-49-EST_Mon.log
  
  List of houses on this system:
  
  Name of the House = OraDb10g_home1, rental = "/ u02/oracle/PROD/db/tech_st/10.2.0/db/inventory/prereqs".
  Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home.
  Possible causes are:
  Oracle Home Dir. path does not exist in the Central stock
  Oracle Home is a symbolic link
  The Oracle Home inventory is corrupted
  Failure of the LsInventory Session: OracleHomeInventory::load() gets oracleHomeInfo null
  
  OPatch failed with the error code 72

  Hello

  Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home
  The Oracle Home inventory is corrupted

  Please, check the following:

  (1) you have the last installed opatch
  (2) orainst.loc exists and it is not corrupted
  (3) inventory_loc in orainst.loc points to the good oraInventory
  (4) oraInventory exists and it is not corrupted
  (5) the local inventory exists and it is not corrupted

  If missing oraInventory, restore it from a backup, or please refer to recreate.

  Note: 274526.1 - how to download and install opatch (generic platform).
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=274526.1

  Note: 295185.1 - how to recreate the Global oraInventory
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=295185.1

  Note: 360079.1 - Global inventory and Local explained
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=360079.1

  Note: 754667.1 - "Opatch Failed With Error Code 73' /var/opt/oracle/oraInst.loc pointing oraInventory bad location
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=754667.1

  Kind regards
  Hussein

• Grid Infrastructure 12.1.0.2 OPatch failed with the error code 15

  Has anyone seen this error for the grid Infrastructure 12.1.0.2 - 'OPatch failed with the error code 15 '?  This is a new installation of GI and I was running through the preliminary controls patch before the House with the last power supply.  The error was received when the inventory of IM was being validated.  I searched Google and MOS and empty.

  Any help would be appreciated!

  Although MOS never come back with me, I could find a section for this question.  OPatch failed with the error code 15 in 12 (Doc ID 1964569.1)

• OPatch failed with the error code 73

  Hi all
  
  I apply patches 10.2.0.3 on my family (10.2.0.2) group oracle, then I would apply patch 5752399 (force of e/s doesnot work for the UFS file system), but this fix I have error:
  
  Checking for update...
  OK stock check: Patch ID 5752399 is part of the Oracle Home inventory with appropriate meta-data.
  Archive failed: could not update "/ u0/app/oracle/product/10.2.0/lib/libgeneric10.a" with update "/ 0/5752399/files/lib/libgeneric10.a/skgfr.o".
  Archive failed: could not update "/ u0/app/oracle/product/10.2.0/lib/libgeneric10.a" with update "/ 0/5752399/files/lib/libgeneric10.a/skgfr.o".
  
  ApplySession failed: ApplySession failed in the phase change of the system... "The hotfix checking failed: null'."
  OPatch will try to restore the system...
  Restoration of the House of the Oracle...
  Check if OPatch must call 'make' restore some binaries...
  OPatch was able to restore your system. Look at file log and time stamp of each file to make sure that your system is in the State before applying the patch.
  
  OPatch failed with the error code 73
  
  
  Can someone help me?

  PL see MOS Doc 406472.1 (mandatory 5752399 Patch to 10.2.0.3 on Solaris 64-bit and filesystems managed by Veritas or Solstice Disk Suite software) can help - there are a few notes on this specific issue

  HTH
  Srini

• I get the error code 66A with an update that does not load

  a windows update does not load, I get an error code 66A, its boring, I can't get an answer anywhere

  See Andre.Ziegler response to a previous post about the error code:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/107c5a3a-3126-4EAA-930E-815aed8a2582 >

• Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows XP install error "File\i386\C_437.nls could not be loaded. The error code is 7. Setup cannot continue. Press a key to exit. "

  I've been setting up a windows xp professional operating system, I saw an error message "File\i386\C_437.nls could not be loaded. The error code is 7. Setup cannot continue. Press any key to exit", can anyone help me how can I solve this problem? Thank you.

  Hi HannaAntoun,

  See the article after some troubleshooting for your question:

  http://support.Microsoft.com/kb/330181

  I hope this helps!

• Receive the error code 0 x 643 trying to update. Not sure why they don't is not loading?

  Receive the error code 0 x 643 trying to update. Not sure why they don't is not loading? Tried to look at the code but nothing helped. Any suggestions?

  You can watch the following article to see if this will help with the error 80070643.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643>

  UTC/GMT is 15:50 on Sunday, August 19, 2012

• Restore error 'file \minint\System32\kdcom.dll could not be loaded. The error code is 4 "

  Hello...

  I have a DELL D830 with XP and I get the message:

  File \minint\System32\kdcom.dll could not be loaded. The error code is 4.

  Everytime I try and restore my computer...

  What can I do to fix this, that does not cost a lot of money?
  The only cost of $180 (refurbished) computer... I really don't want to pay that much to fix this...

  It sucks, virus SUCK!  Why do people do the virus? (it seems lame)

  Help, please!

  I had installed security trend, however apparently the virus that caused this exceeded the trend...

  Hi NickRider,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Disconnect all external devices and try to start the computer.

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 4: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

• File \i38\system32\ntkrnlmp.exe could not be loaded. The error code is 32 768. Implementation cannot continue.

  original title: I get an error code 32768

  File \i38\system32\ntkrnlmp.exe could not be loaded.  The error code is 32 768.  Implementation cannot continue.  How can I fix?

  Hello

  · What is the number and the model of the computer?

  · Which edition of Windows you install?

  Try the steps listed in the link below and check if it helps:

  "Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during installation of Windows: http://support.microsoft.com/kb/318729

• File\i386\C-437.NLS could not be loaded. The error code is 32768

  Would somebody get out me of my question below?

  When I set up my operating system professional Window XP, an error message popped up as "File\i386\C_437.nls could not be loaded. The error code is 32 768. Setup cannot continue. Press any key to exit. "It's a brand-new product of geniue which I bought in Singapore from Microsoft on the Web.

  Now, I want to have the problem fixed so that I can be able to configure system. Thank you very much.

  Hello

  You can clean your system by using the disk cleanup utility (i.e. remove unwanted files from the system). I suggest you return the item mentioned below.

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  I also suggest you to extend the system C:\ drive and check if the problem is resolved.

  The partition size is extended, but the file system remains the original size when you extend an NTFS volume

  http://support.Microsoft.com/kb/832316

  How to extend a data volume in Windows Server 2003, Windows XP, in Windows 2000 and in Windows Server 2008

  http://support.Microsoft.com/kb/325590

  How to use disk management to configure dynamic disks in Windows XP

  http://support.Microsoft.com/kb/308424

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Windows Media Player Vista when I try to play some videos, including some film my daughter loaded on a usb key that I encounter the error code cood11d1

  I presume that I have windows media version 11 of the drive and when I try to play some videos, including some film my daughter loaded on a usb key that I encounter the error code cood11d1. My attempts appear so far have confirmed that I have the latest updates available for my drive, and after you run the fix it program tell me no error or problems when identified. Appreciate any help that can be offered

  Hi at Rob Merci for the quick reply, but before that I followed one of your suggestions I confirm the error message I get when trying to play some movies is certainly cood11d1 so your thoughts before going further with thank you bob.

  ==========================================

  Followign links may be worth a visit:

  (935336) Windows Media Player 11 cannot
  read content protected by DRM on Windows Vista
  http://support.Microsoft.com/kb/935336

  (925705) when you try to use Windows Media
  Player 11 to play a digital rights management
  (DRM) - protected media file media cannot play
  http://support.Microsoft.com/kb/925705

  The security component upgrade
  http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp

  Windows Media Player: Mini WMP FAQ
  http://zachd.com/PSS/PSS.html
  (scroll down a bit to the 3rd entry that said: Vista only)

  Windows Media Player error c00d11b1 resolved
  http://Strom.WordPress.com/2007/04/06/Windows-Media-Player-error-C00D11B1-solved/
  (it's a long discussion on the error 0XC00D11B1)