Additional SCSI controller

Y at - it performance of adding an additional SCSI controller? I have a virtual machine with 2 virtual disks and RDM 3. I think about adding a second SCSI controller for the RDM.

Mike

The answer is: it depends

If you switch to the adapter PVSCSI vSphere and you can have up to 12% rate to 18% less CPU usage. More information here. There are also a few drawbacks here.

It is also good the KB Article.

If you have vSphere, the only difference between one and two controllers SCSI will have the possibility to separate the 'SCSI Bus sharing settings' between the disks.

Pozdrawiam/Best looks

Andrzej

Tags: VMware

Similar Questions

Addition of RDM but bo SCsi controller is added

Hello
I am trying to create a cluster between two virtual machines that are on two servers different esxi. I use SAN VNX 5100. My esxi version is 5.1.
I am trying to add RDM hard drive but when I completed the steps, it didn't add the SCSi controller.
Any idea?
Kind regards
Talha

This statement is a useful guide that covers the process for a few common scenarios: http://pubs.vmware.com/vsphere-50/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-50-mscs-guide.pdf

Manual addition of SCSI controller

Hello

I got in trouble, adding to a SCSI controller. My code looks like this:

name = "SSCI Controller";
description = "SSCI Controller";
address = 0;
type = 6;
subType = "lsilogicsas";

CimString cimString = new CimString();
Map<QName, String> cimAttributes = cimString.getOtherAttributes();
cimAttributes.put(new QName("http://www.vmware.com/vcloud/v1.5",
"busSubType", "vcloud"), subType);
cimAttributes.put(new QName("http://www.vmware.com/vcloud/v1.5",
"busType", "vcloud"), String.valueOf(type));
cimString.getOtherAttributes().putAll(cimAttributes);
CimString setElementName = new CimString();
setElementName.setValue(name);
CimString setDescription = new CimString();
setDescription.setValue(description);
CimString setInstanceID = new CimString();
setInstanceID.setValue("1000");
ResourceType setResourceType = new ResourceType();
setResourceType.setValue(String.valueOf(type));

CimString setAddress = new CimString();
setAddress.setValue(String.valueOf(address));

RASDType diskItemType = new RASDType();
diskItemType.setElementName(setElementName);
diskItemType.setDescription(setDescription);
diskItemType.setInstanceID(setInstanceID);
diskItemType.setResourceType(setResourceType);
diskItemType.setAddress(setAddress);
diskItemType.getHostResource().add(cimString);

The XML looks like this:

 <ns6:Item>
        <ns3:Address>0</ns3:Address>
        <ns3:Description>IDE Controller</ns3:Description>
        <ns3:ElementName>IDE Controller 0</ns3:ElementName>
            <ns3:InstanceID>1</ns3:InstanceID>
        <ns3:ResourceType>5</ns3:ResourceType>
    </ns6:Item>
    <ns6:Item>
        <ns3:Address>0</ns3:Address>
            <ns3:Description>SSCI Controller</ns3:Description>
        <ns3:ElementName>SSCI Controller</ns3:ElementName>
        <ns3:HostResource ns6:busSubType="lsilogicsas" ns6:busType="6"/>
        <ns3:InstanceID>1000</ns3:InstanceID>
        <ns3:ResourceType>6</ns3:ResourceType>
    </ns6:Item>

Also, I get a success message:

<Task xmlns="http://www.vmware.com/vcloud/v1.5" status="success" startTime="2011-11-08T21:14:32.401+01:00" operationName="vappUpdateVm" operation="Updated Virtual Machine Test Machine(6c99a693-fcfc-4424-afdb-cf5a9172447b)" expiryTime="2012-02-06T21:14:32.401+01:00" endTime="2011-11-08T21:14:32.635+01:00" name="task" id="urn:vcloud:task:ac59ce2a-fc3f-451e-891d-0a2e1ab54e7c" type="application/vnd.vmware.vcloud.task+xml" href="https://188.138.123.220/api/task/ac59ce2a-fc3f-451e-891d-0a2e1ab54e7c" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.vmware.com/vcloud/v1.5 http://172.30.34.220/api/v1.5/schema/master.xsd">
    <Owner type="application/vnd.vmware.vcloud.vm+xml" name="Test Machine" href="https://188.138.123.220/api/vApp/vm-6c99a693-fcfc-4424-afdb-cf5a9172447b"/>
    <User type="application/vnd.vmware.admin.user+xml" name="scriptuser" href="https://188.138.123.220/api/admin/user/8062b4a4-2aa5-4858-af62-b8bee8baa693"/>
    <Organization type="application/vnd.vmware.vcloud.org+xml" name="Demo" href="https://188.138.123.220/api/org/baca2a0b-d2be-4b6a-ad30-9268b9cdee23"/>
</Task>

The problem is take a look in the hardware section that I can't find the SCSI controller...

Can someone help me?

Hello

Adding a type SCSI drive will add the SCSI controller for you.

I don't think that you can add only a SCSI controller without any disk to it.

Try to only add a SCSI (buslogic, free, lsilogicsas, VIrtualSCSI) disc that will add a SCSI controller for you.

any name

any id

Kind regards

Rajesh Kamal.

Adding a virtual drive on the SCSI controller with sharing fails physical/virtual

I have added a virtual disk to a SCSI controller with bus sharing physical or virtual, which is put down to the code below. Same code gets successfully if the bus share is 'noSharing '.
$vmView = Vim::find_entity_view (view_type = > 'VirtualMachine', filter = > {name = > $vms [0]});
$controllerKey = find_scsi_cntlrkey (vm = > $vmView, controller = > $cntlr);
my hash % =)
VM = > $vmView,
diskMode = > 'persistent. "
fileName = > $filename,
controllerKey = > $controllerKey,
unitNumber = > $target,
size = > "5242880",.
backingtype = > "ordinary."
UUID = > UNDEF,
deviceName = > UNDEF,
);
My $filespec = get_vdiskSpec (%hash);
print Dumper $filespec;
My $vdisk = add_virtualdisk (vm = > $vmView, devspec = > $filespec);
Run the command:
amrut@2:~/scripts/VMware/apps$ perl RDM_add.pl - vmname vm1 - Server vcenter_server name of [email protected] past Pass@123--op generation add - 2, 2 - controller filename vm_232
Addition of new LsiLogicSAS vSCSI 2 Controller to "vm1.
Successfully added
$VAR1 = bless ({}
'fileOperation' = > bless ({}
'val' = > 'create '.
(}, 'VirtualDeviceConfigSpecFileOperation'),
'operation' = > bless ({}
'val' = > 'Add '.
(}, 'VirtualDeviceConfigSpecOperation'),
'device' = > ({bless him
'capacityInKB' = > '5242880',.
"backup" = > bless ({}
'Filename' = > ' [datastore1 (4)]/vm1/vm_232.vmdk',)]
'diskMode' = > 'persistent '.
(}, "VirtualDiskFlatVer2BackingInfo").
'unitNumber' = > 2,
'controllerKey' = > '1002',.
'key' = >-1
(}, "VirtualDisk")
(}, "VirtualDeviceConfigSpec");
Cannot configure the virtual device.
amrut@2:~/scripts/VMware/apps$
In vcenter GUi I get below error:
Has no power on scsi2:2.
Cannot add the disk scsi2:2.
But more successful if sharing of bus is none!
amrut@uptohell2:~/scripts/VMware/apps$ perl RDM_add.pl - vmname vm1 - Server vcenter_server name of [email protected] past Pass@123--op generation add - 1:2 - filename vm_232 controller
$VAR1 = bless ({}
'fileOperation' = > bless ({}
'val' = > 'create '.
(}, 'VirtualDeviceConfigSpecFileOperation'),
'operation' = > bless ({}
'val' = > 'Add '.
(}, 'VirtualDeviceConfigSpecOperation'),
'device' = > ({bless him
'capacityInKB' = > '5242880',.
"backup" = > bless ({}
'Filename' = > ' [datastore1 (4)]/vm1/vm1_232.vmdk',)]
'diskMode' = > 'persistent '.
(}, "VirtualDiskFlatVer2BackingInfo").
'unitNumber' = > 2,
'controllerKey' = > '1001'.
'key' = >-1
(}, "VirtualDisk")
(}, "VirtualDeviceConfigSpec");
Created virtual disk.
amrut@2:~/scripts/VMware/apps$
Can you get it someone please let me know, we should pass us any other parameter for the addition of SCSI controller with bus sharing physical/virtual disk?
Thank you
Celine

Yes, the stand is adjustable to all types at deployment time. You need to change your disk with the correct support add operation.

Add the new SCSI controller and new drive - powershell SDK

Hi all
I'm trying to add the new disc of paravirtual to my VMs. There are two types of virtual machines in the environment; a Paravirtual controller attached and others are without controller; so my task is to set the new drive of paravitual using powershell SDK.
So far I am successful with my code if the controller is already present but the script fails when I try to attach the controller. with the error.
RecommendDatastores: The method call failed because [System.Object []] contains a method named "RecommendDatastores".
C:\NodeDeployment\Inprogress\Add_newPVScsiDisk.ps1:111 tank: 44
+ $generatedkey = $SRM. RecommendDatastores < < < < ($storageSpec)
+ CategoryInfo: InvalidOperation: (RecommendDatastores:String)], RuntimeException
+ FullyQualifiedErrorId: MethodNotFound

I know that this script is not good enough to post here because it is an initial draft, but in the script attached please help me with the present part-
The Script requires a csv with VMname entry; Disksize to be attached and store cluster data
```
else {
            Write-Host "Paravirtualized SCSI Controller Not Found in $vmname.. Trying to add new scsi controller and additional Hard-disk..."
            $NewSCSIDevice = New-Object VMware.Vim.VirtualDeviceConfigSpec
            $NewSCSIDevice.operation = "add"
            $NewSCSIDevice.device = New-Object VMware.Vim.ParaVirtualSCSIController
            $NewSCSIDevice.device.key = -222
            $NewSCSIDevice.device.busNumber = ($allScSiController.BusNumber.Count)
            $NewSCSIDevice.device.sharedBus = "noSharing"
            $NewDiskDevice.device.controllerKey = -222
            $NewDiskDevice.device.unitNumber = 0
            $NewDiskDevice.device.capacityInKB = ($diskSize * (1024 * 1024))
            $storageSpec.configSpec.deviceChange += $NewDiskDevice
            $storageSpec.configSpec.deviceChange += $NewSCSIDevice
            $generatedkey = $SRM.RecommendDatastores($storageSpec)
            $key = $generatedkey.Recommendations[0].Key
            $SRM.ApplyStorageDrsRecommendation_Task($key)
}
```
OK I have it myself; I guess busnumber was the problem. He converted to INT working like charm...

Now, I have to work with storage Drs IE. with the ReconfigureVM_task method. hoping that will work also...

else {}

[int] $busnumber = $allScSiController.Count

Write-Host "paravirtualized SCSI Controller not found in $vmname... Try to add the new controller scsi and extra hard drives... »

$NewSCSIDevice = new-Object VMware.Vim.VirtualDeviceConfigSpec

$NewSCSIDevice.operation = 'Add '.

$NewSCSIDevice.device = new-Object VMware.Vim.ParaVirtualSCSIController

$NewSCSIDevice.device.key = - 222

$NewSCSIDevice.device.busNumber = $busnumber

$NewSCSIDevice.device.sharedBus = "noSharing".

$NewDiskDevice.device.controllerKey = - 222

$NewDiskDevice.device.unitNumber = 0

$NewDiskDevice.device.capacityInKB = ($diskSize * (1024 * 1024))

$storageSpec.configSpec.deviceChange += $NewDiskDevice

$storageSpec.configSpec.deviceChange += $NewSCSIDevice

$generatedkey = $SRM. RecommendDatastores ($storageSpec)

$key = $generatedkey. Recommendations [0]. Key

$SRM. ApplyStorageDrsRecommendation_Task ($key)

}

---

Concerning
Sanshis

New hard drive fails on Windows Server 2008 VM with LSI Logic SAS SCSI controller

When I try to add a new hard disk to a virtual computer with the cmdlet New-disk hard of a Windows Server 2008 virtual computer, I get the following error:
New-hard drive: 18/01/2010-14:59:48 New-B8EDFDDF-ACF6-43AC-B111-51D332290FC7 hard drive for the entity vm-315 failed with the following message: "Number of virtual devices exceeds the maximum for a given controller."
On line: 1 char: 13
+ new hard drive & lt; & lt; & lt; & lt; VM - $vm [5] - capacityKB 4194304
+ CategoryInfo: InvalidArgument: (vm - 315:String) , ViError
+ FullyQualifiedErrorId: Client20_TaskServiceImpl_CheckServerSideTaskUpdates_OperationFailed, VMware.VimAutomation.Commands.NewHardDisk
When assigning a different virtual machine, for example the parallel LSI Logic Controller, it is not a problem at all. When I add additional disks using the VI Client, there also no problem, regardless of the SCSI controller I use.
Someone had this problem as well? Y at - it a known solution?

Hi rengelen,

I admit that I was pretty murky about when the fix will be available. The thing is that VMware has a policy that employees should not mention liberation time unless we are certain that we can keep his promise of 100%. Hence statemens as 'will be available in a future release.

Portege 7200 pci missing scsi controller

Can someone help me with the following problem. One of my friends was a protégé of 7200. He had reinstalled it by Toshiba. Now when it boots up it it aks for bus pci scsi controller drivers.

Because he probably needs to access its external cd-rom drive, it cannot access the windows cd. Does anyone know where the drivers or where to find them?

THNX

Hello

Go to http://eu.computers.toshiba-europe.com then download driver. Choose the Portege 7200 and highlight the download link!

Rudi Bye

Get the PCI slot for a virtual SCSI controller number?

Is it possible to retrieve the number of a virtual SCSI controller for PowerCLI PCI slot? I dug everywhere but I can't find anywhere in ExtensionData SCSI controllers and hard disks.
I would like to use to correlate VMDK disks Windows because all the scripts I found goes off a hypothesis on how devices assigned one PCI slots, and in my conclusions, these assumptions are not 100% reliable.
I checked the properties of both of these items with no luck:
$VirtualSCSIAdapters = $VMView.Config.Hardware.Device | Where-Object {$_.} DeviceInfo.Label - match "SCSI controller"}
$VirtualDiskDevices = $VMView.Config.Hardware.Device | Where-Object {$_.} DeviceInfo.Label - match 'Hard drive'}
I know that at the very least, the slot is stored in the vmx file. In the worst scenarios, it is possible to collect data of vmx?

It is get you what you need?

$vm = get - vm 'test '.

$vm. ExtensionData.Config.ExtraConfig | where {$_.} Key - eq "scsi0.pciSlotNumber"}

Why do not the remove-hard drive remove a disc with a new SCSI controller?

Hi PowerCLI gurus,
I try to use PowerCLI to automate the solution for article configuration of disks to use VMware Paravirtual (PVSCSI) SCSI adapters (1010398).
Remove-hard drive sometimes gives me a misleading error when I use it to remove a hard drive with a new SCSI controller.
The FlatHardDisk specified 'Hard disk 3' no longer exists, or never existed.
Can anyone here explain the error?
My version of vCenter server is 5.1.0.
My PowerCLI version is 2.0.
Here's what I've done to reproduce the error.
First of all, I connect to vCenter and stop the virtual machine.
$TestVM = 'TESTVM '.
$TestServer = ' vcenter - test.local ".
SE connect-VIServer-Server $TestServer
Stop-VM - $TestVM VM - confirm: $false
I add a new hard drive and store it in a variable so I can refer to it for the next steps.
New hard drive '.
-VM $TestVM '
-Persistent persistence"
-Flat DiskType '
CapacityKB - 1024'
StorageFormat - thin '
-OutVariable TempDisk
I make a note of its name.
$TempDisk.Name
Because my VM already has 2 discs, the output is "hard drive 3.
Then I add a new SCSI controller on the hard drive.
New SCSI controller.
Hard drive - $TempDisk '
-Type ParaVirtual '
NoSharing - BusSharingMode
Now, I try to remove the hard drive from the variable to remove the disc.
Remove-hard drive - hard drive $TempDisk - DeletePermanently-confirm: $false
It fails with an error that says "Hard drive 3" has already been removed.
Remove HDD: 12/02/2014-18:51:33 remove-hard drive the FlatHardDisk specified 'Hard disk 3' no longer exists, or never existed.
On line: 1 char: 1
+ Delete-hard drive - hard drive $TempDisk - DeletePermanently-confirm: $false
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo: ObjectNotFound: (3:FlatHardDiskImpl drive) [Remove-hard drive], VimException
+ FullyQualifiedErrorId: Client20_VirtualDeviceServiceImpl_TryValidateDeviceExists_DeviceDoesNotExist, VMware.VimAutomation.ViCore.Cmdlets.Commands.RemoveHardDisk
But I see that there are still "hard drive 3"!
Get-disk hard - VM $TestVM - name 'hard drive 3.
CapacityGB persistence Filename
---------- ----------- --------
0.001 persist... B-DATA-01] TESTVM/TESTVM_9.vmdk
Is this a bug or am I missing something?

I don't think that the cmdlet uses actually the UID, but more likely a MoRef to the vSphere object that represents the hard disk.

Remember that under the covers most of the PowerCLI cmdlets do calls to the vSphere API.

Change the Uid, property value indicates that the hard drive connected to the new controller is a new and different purpose.

And this explains why the hard drive remove does not work with the original hard disk object, it no longer exists.

vCenter device SCSI Controller

Hello
All the world looked at changing the vCenter device SCSI controller? I find it strange that the device is delivered without using the paravirtual SCSI controller, we saw good returns when upgrade to that and I would like all areas if possible (called limits taken into account).
I appreciate the device is distributed "such what ' and change of way would probably cancel all support, but I'm still curious to know if anyone has tried.

Looks like I'm the only one with something to add...
.

End a call with a VMware engineer who confirmed that the PVSCSI controller is not supported on the existing device of the vCenter. This is because it is running SUSE Linux 11 without service pack 1 is required to support.

Obviously, the engineer could not comment on future developments, but perhaps a new version of the device will run on a later version of SUSE that supports the adapter PVSCSI.

Help pass the hard drives of a scsi controller to another scsi controller!

Hello
I deployed a cluster of virtual machines from a template and trying to customize them according to the requirement. I called one of the post and used the code below. Changed the settings of the virtual machines, but the image is corrupt all the time.
# get the virtual computer object
$vmVMSTORE23 = get - VM VMSTORE23
# a thin in the storageformat of hard disk
$vmVMSTORE23 | Get-hard drive | Together-hard drive - thin StorageFormat
# define the type of SCSI controller
$vmVMSTORE23 | Get-SCSI controller. Set controller SCSI-type VirtualLsiLogicSAS
I tried the other way, adding a new scsi controller and move the existing hard disks to the new controller scsi. A hard disk created along deployment of a model does not again move scsi controller and vm tries to start node scsi 1:0 and no node scsi 0:1. This is the snap of code I used
$VirtualMachinesDetails | % {New-disk-hard - VM $_.} Name - CapacityGB 1 - Datastore (Get-Datastore $_.) (Magasin de données)-persistence IndependentNonPersistent-confirm: $false} (disc 2)
$VirtualMachinesDetails | % {New-disk-hard - VM $_.} {Name - DiskType $_.rawtype - Devicename $_ .rdm1 - confirm: $false} (Disc 3)
$VirtualMachinesDetails | % {New-disk-hard - VM $_.} {Name - DiskType $_.rawtype - Devicename $_ .rdm2 - confirm: $false} (drive 4)
$disk = $VirtualMachinesDetails | % {Get-disk hard - VM $_.} Name | Select the option - 4 first}
$VirtualMachinesDetails | % {New-SCSI - HDD controller $disk - type $_.} Type}
Someone please help me with this.
Thanks in advance
SAI

What I wanted to say, create a new hard drive with the new type of controller.

Like this
```
$vmName = "TestVM"$VM = Get-VM -Name $vmName

New-HardDisk -VM $vm -CapacityGB 1 -ThinProvisioned | New-ScsiController -Type VirtualLsiLogicSAS
```
Then restart the virtual machine and the guest operating system must take care of the driver.

Once the driver is installed in the guest operating system, you can move the hard disk that contains the system partition to the new controller.
```
$vmName = "TestVM"$VM = Get-VM -Name $vmName

$controller = Get-ScsiController -Name "SCSI Controller 1" -VM $vmyGet-HardDisk -VM $VM -Name "Hard disk 1" | Set-HardDisk -Controller $controller -Confirm:$false
```

Adding new SCSI controller: "error string: invalid operation for the '0' device.»

Hello
I have a problem when I try to add a SCSI controller to a virtual machine.
I have this error:
Error string: invalid operation for the device '0'.
Lack of details: InvalidDeviceOperation
Here is my code:
my $info = Description-> new (label = > summary of "" SCSI controller 2 ' = > 'LSI Logic parallel' ");
my $controller = VirtualLsiLogicController-> new)
deviceInfo = > $info,
scsiCtlrUnitNumber = > '7'.
sharedBus = > VirtualSCSISharing-> new ('noSharing'),
busNumber = >-1,
key = >-1,
backup = > $backing_info,
controllerKey = > 100,
);
My $devspec = VirtualDeviceConfigSpec-> new (operation = > VirtualDeviceConfigSpecOperation-> new ('add'),)
device = > $controller,
fileOperation = > VirtualDeviceConfigSpecFileOperation-> new ('create').
);
My $vmspec = VirtualMachineConfigSpec-> new (deviceChange = > [$devspec]);
{eval
$vm_view-> ReconfigVM (spec = > $vmspec);
Util::trace (0, "Controller has been created. \n") ;
};
I don't know how to handle, or even how to solve problems.
Any ideas would be greatly appreciated.
Kind regards
Jeremy

I finally found a solution.

It seems that it fails if you give a marked as mandatory parameter (scsiCtlrUnitNumber, hotAddRemove)... Theses parameters seem to be set automatically, a dump of the device which will show.

Here's the code used:

My = $controller_spec

VirtualDeviceConfigSpec-> new (device-online VirtualLsiLogicController-> new (key-online 0

device-online [0],

busNumber => $scsi_controller.

sharedBus => VirtualSCSISharing-> new ('noSharing')),

operation => VirtualDeviceConfigSpecOperation-> new ('Add'));

My $vmspec = VirtualMachineConfigSpec-> new (deviceChange-online [$controller_spec]);

{eval

$vm_view-> ReconfigVM (spec-online $vmspec);

};

Script to list all the VMS and their scsi controller

Hey guys,.
New to scripting and my boss is looking for me to get a list of all the vm in our environment and the type of scsi controller they have. It seeks to go to paravirtual controller and need to know what vm, he needs to hit. I saw there is a script to change the paravirtual but he won't do it again, just the list including vm has what. Any help would be greatly appreciated.
Thank you
Rich

Something like that?
```
Get-VM | Select Name,@{N="Controller Type";E={Get-ScsiController -VM $_ | Select -ExpandProperty Type}}
```

RDM scsi controller

Hello
Adding a row for the first time on a virtual machine requires add separate scsi controller. If so is there a reason for this.
Thank you

As far as I know, a separate virtual SCSI controller is necessary only for shared for example of disks in an MSCS configuration.

André

Trying to type of SCSI controller with guest operating system list

I'm trying to shoot a list using PowerCLI of each virtual machine, each SCSI controller and the operating system, it runs. I'm able to pull data very well, but the problem that I am running attempts to export it with anything (html, csv, xml). Here is my script up to now:
$vm = get-View - ViewType VirtualMachine-property @("nom", "Config.Hardware.Device", "Guest.GuestFullName") | Select-Object - property name, @{N = "SCSI controller"; E={($_. Config.Hardware.Device | where {$_.} DeviceInfo.Label - match "SCSI"}). DeviceInfo.Summary}}, @{N = 'Running OS'; E={$_. Guest.GuestFullName}} | Format-Table - Autosize-Wrap
The problem that I am running is when I try to make:
$vm | convetto-html
It exports which seems to be a GUID ID, but not the actual data. If I echo the variable $vm, I see the data I expect to formatted as I want to, I can't go out only in a format outside of the console. I also tried another method
$vms = get-View - ViewType VirtualMachine-property @("nom", "Config.Hardware.Device", "Guest.GuestFullName")
$result = @)
foreach ($vm to $vms)
{
$newrow = "" | Select-object Name, controller, OS
$newrow.name = $vm.name
$newrow.controller = $vm | Select-Object - property ($_.) Config.Hardware.Device | where {$_.} DeviceInfo.Label - match "SCSI"}). DeviceInfo.Summary
$newrow.os = $vm | Select-Object - property $____. Guest.GuestFullName
$result += $newrow
}
It lists the name of the virtual machine, but the other two columns show VMware.Vim.VirtualMachine. Probably missing me something simple here, but I can't understand it. What Miss me?
Thank you for your help in advance.

Try this:
```
$vms = Get-View -ViewType VirtualMachine -Property @("Name", "Config.Hardware.Device", "Guest.GuestFullName")
$result = @()
foreach($vm in $vms)
{
    $newrow = "" | select-object Name, Controller, OS
    $newrow.name = $vm.name
    $newrow.controller = ($vm.Config.Hardware.Device | where{$_.DeviceInfo.Label -match "SCSI"}).DeviceInfo.Summary
    $newrow.os = $vm.Guest.GuestFullName
    $result += $newrow
}
```

Additional SCSI controller

Similar Questions

Maybe you are looking for