Addobe Flash says it loads on my vista 32 bit and 32 bit IE, but is not.

Similar Questions

• My Windows Vista download updates and seem to install but do not configure when the computer restarts. Clues about the problem?

  This has happened since April 12, but I'm just now "getting it." no error messages or numbers.   I saw something on NVIDIAnForce 10/100 Mbps Ethernet problem in another context?

  Hi donorann,

  ·         Did you do changes on the computer before the show?

  ·         Updates (KB numbers) you are trying to install?

  ·         The updates are installed successfully?

  View the history in Windows Update in Control Panel window, or go to installed updates:

  Open installed updates by clicking the Start button, click Control Panel, click programs, and then under programs and features, click view installed updates.

  Follow the steps in the article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  Note: You must take the backup of the data before performing any installation of windows.

  For reference:

  You cannot install some programs or updates

  Understand the automatic Windows Update

• Firefox is not fully load site Barclaycard of authentication. It load regarding the demand for certain letters in my password but does not load the button 'Submit', so I can't continue with my purchase and I switch to IE8 browser to buy whatever it is ov

  Firefox is not fully load site Barclaycard of authentication. It load regarding the demand for certain letters in my password but does not load the button 'Submit', so I can't continue with my purchase and I switch to IE8 browser to buy anything on the internet. Clues?

  This has happened

  A few times a week

  Is a few weeks ago

  Your UserAgent string in Firefox is totally messed up by another program that you have installed and Barclays does not know you use Firefox 3.6.6 - it is probably similar to IE 6.0 on this site.
  http://en.Wikipedia.org/wiki/USER_AGENT

  type of topic: config in the URL bar and press ENTER.
  If you see the warning, you can confirm that you want to access this page.
  Filter = general.useragent.
  Preferences are "BOLD", a line at a time, and then select reset, right click
  Then restart Firefox

• I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit. But now the network controller is not working and I can't use wireless internet

  I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

  I have reinstalled the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

  Install the appropriate network device drivers and software from the Dell downloads web site for your particular model, or better yet, tag Service...

• By clicking on uninstall on Biz Vista 32 bit in Control Panel - not opening.

  By clicking on uninstall on Biz Vista 32 bit in Control Panel - not opening. No error message. Saw a mistake early on the osbaseln.dll not correct. Please help :) Try to install Windows 7 but recommended, I need to uninstall Windows Onecare. I'm unable to open the ' uninstall option.

  Try to download http://www.snapfiles.com/reviews/revo-uninstaller/revouninstaller.html Revo and uninstall the program using Revo uninstall Vista feature which doessn can't seem to work.  If it's only then you can move to Windows7 there is no real need try to find and correct the uninstall process if Revo works since that will be replaced when you upgrade.

  I hope this helps.

  Good lcul!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I was able to downwload Photoshop and the Prime Minister, but can not have install... it says that I don't have the necessary files, ideas?

  I was able to downwload Photoshop and the Prime Minister, but can not have install... it says that I don't have the necessary files, ideas?

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  http://prodesigntools.com/Photoshop-elements-13-direct-download-links-premiere.html

• my computer at home base down loaded /my computers certificate of authinticity says I am having windows vista Home premium and I have no disc what do I doto fix the problem in windows vista

  my computer has windows vista basic on it when I went to athinticate, he told me it was a pirate down load that I looked on the bottom of my lap top and I am supposed to have windows vista Home premium. How can I solve this problem with a disc

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  See if you have a recovery Partition:

  There may be a recovery on the drive Partition hard reinstall Vista to how you bought your computer, unless the pirated installation wiped.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I removed Windows Vista 32-bit and Windows Vista 64-bit installed, but when I enter the key it says the key is already in use. How can I fix it?

  I have Windows Vista Ultimate 32 and 64 bit edition

  I bought Windows Vista Ultimate 32 and 64 in a box in 2008, I installed the 32 edition because at the time I was told not all software will work with the edition 64 a month ago, I decided to windows 7 Ultimate Via Amazon purchase which proved be a copy of the counterfeit money and Amazon me has now repaid , so what I do, well I could buy another copy of windows 7 Ultimate or I could give the other Version of windows that came in the same box with a product key a go, so I removed and formatted the hard drive and reinstalled 64 bit version on my drive using the product key original that I used on the 32-bit Edition for four years and when I try to register the 64 bits edition, that is to say someone else using this product key, you will have to buy another key or a copy of windows 7. Well, I decided to wait until Windows 8 will be released, that's why I decided to try the Vista 64 - bit Edition?

  Or better yet, I might switch to a Mac OS x system?

  The answer is not to buy Windows 7 from a dealer on the market of Amazon.  Stick to Amazon itself.  Amazon Marketplace is as eBay and other auction sites and online delivery.  It is composed of persons whose practices sales are questionable.  You won't get counterfeit product from Amazon itself.

  You have to solve the problem with Vista 64-bit using phone activation.

  Activate by phone.  http://TechNet.Microsoft.com/en-us/library/cc736912 (WS.10) .aspx

  Or click Start and type ' slui.exe 4.

  Do not answer all prompts automatic until it asks you if you want to speak to an agent.

  If you continue to have problems with activation, run the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool

  Once downloaded, run the tool. Click on the button continue, after a short time, continue button will change to a copy button. Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

• problem loading LR4 on Vista 64-bit

  I bought a copy of the LR4, loaded on my desktop (MAC) without problem, but not load a second copy of my laptop under Vista 64-bit.  Any thoughts?

  Will be that the DVD should be fine if it is mounted on the Mac.  You have another computer based on Windows, you can try?  If you can ride on a different disk, you can copy on a USB key.

  Alternatively, you can download the trial version of Photoshop Lightroom on your Vaio and use your serial number.  Here is the link to the trial software - https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom&promoid&promoid=D TEML.

• Trial version of Streets & Trips does not load on windows Vista 64-bit

  Original title: with Vista 64-bit

  My laptop is a computer with Vista 64 bit and the trial version of Steets and the TRIPS Agreement will not charge.  I can use it on my desktop, but the laptop is required to use during travels in the motorhome.  Is there a driver I can download MS to be able to use this program?  Or should I buy another laptop to use?

  Hello

  1. it works now, sorry to bother you.

  Golfingene

• Tecra A9 came with Vista and XP, the disks - but can not activate XP

  Hello

  I have a Tecra A9, it came with Vista Business pre-installed and on a recovery disk. It also came with a XP Recovery disk.

  Part of the documentation in the box suggests that I should be able to simply install XP from the recovery disc. I tried this, but I can't activate XP. I called the number of Microsoft on the activation screens and entered all the numbers, but I then told me that there is an error and I should change my product key.

  My laptop on a a Vista product key stuck on the bottom. So, I seems to be a little stuck.

  The sheet that was in the box says:

  "it's additionall equipped with a Windows XP Professional Recovery DVD - ROM that allows you to easily install this operating system on your own. To do this, follow the instructions on the packaging of the DVD of restoration"

  Usefully, there is no instructions on the packaging of recovery DVDs, I expected maybe a XP product key or something... But clearly not.

  How should I proceed?

  Thank you

  Hello

  Sorry, but I'm a little confused. As much as I know Toshiba recovery image should not be enabled and if you please be so kind and explains what exactly happens when you try to use recovery media?

  On what stage you must enter the product key?

• Error code 5. My version of windows is Vista 64-bit. RegCure is not supported on this version of windows. How can I fix this error code 5?

  I tried to install a music software, but could not. The following error came. DeleteFile; code 5.
  I tried to use the solution for code 5, it did not work. Instead he informed me that RegCure is not
  supported on my version of windows. My version of windows is Vista 64-bit.

  Any solution out there?

  If you ever think your registry database must be cleaned, repaired, amplified, to the point, or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista 64 Bit Home Premium does not start when a disc is in the optical drive

  I tried to understand this for a long time, but I thought I might as well ask for help.  I use Vista 64 - bit Home Edition Premium and the problem I have is that I cannot restart my machine if a disc is in the optical drive. Specifically, if I have a DVD or Bluray disc in the optical drive (IE a BD - ROM drive). When I restart my computer and a disk is present, the startup process is going past the initial windows screen, but that's how far it goes. My desktop (I don't have a password to connect). Initially, I thought it was a matter of priority to boot but the boot process starts from the hard drive but stops at half way through. Then, I went into the BIOS and removed the optical drive completely from the boot priority list.  But there is no change in behavior. The process stops with the only thing visible on the splash screen is a black screen and the hard drive light flashes and goes out from time to time.  I use this computer as my Home Theater PC and sometimes I have to restart my machine when a movie DVD or a Bluray movie is in the optical drive. I would appreciate any response that can help me solve this problem...

  Thanks in advance...

  There may be something wrong with the files on your hard disk.  We will try to update to see if it helps:

  Do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not resolve the problem, try the following:

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps (I believe you need a disc for Installation of Vista to do that, even if some Installtion OEM disc might work, but probably not all the recovery discs).

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click command prompt.

  7. type Bootrec.exe, and then press ENTER.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  ·        bcdedit/export C:\BCD_Backup

  ·        c:

  ·        Boot CD

  ·        BCD attrib s h - r

  ·        Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  If this does not work, or if you do not have the disk, try EasyBCD http://neosmart.net/dl.php?id=1 and see if that works and does everything well.  Make sure what you are doing or you could mess up your boot files and you'd be in a lot of trouble.

  I don't know if the problem is even caused by startup files (but it is possible if it is not the BIOS), but you'd better check and if the procedures are followed to the letter as stated there is no harm in trying.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• problems with windows vista 64-bit. I did not drive, the PC is HP brand,

  Windows does not start. a recent hardware or software change might be the cause.

  1 insert the disc
  2. choose the language
  3 click on repair

  If no disk so forth and so

  file: \boot\bcd
  status: 0xc000000f

  I can't access safe mode or recovery mode through the f - keys for some reason, the only things that I can get to are the installation and the bios screen. tried pulling the cord/battery and unplugging everything, even tried using WinRE neosmart but nothing not done, Im at my intelligence stop there...

  any suggestions?

  Hello

  If you do a cover, here is the information of HP:

  "Recover Windows Vista operating system using HP Recovery"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  See you soon.

• I have the demo CS6 loaded on my Vista 64 bit pc. do I need to uninstall it before installing CC?

  Well?

  Yes, in all cases, you must uninstall the beta before installing and the current production version.

  I recommend the CC requirements for each specific application and service

  Windows Vista is not a supported operating system.

  http://www.Adobe.com/in/products/creativecloud/tech-specs.html#requirements