Addon extra columns folder causes problems

Similar Questions

• Window update causing problems of printer driver

  Hi, I have a laptop running XP and router wireless computer (WAG54G) and a set of HP6380 in one. About 2 nights ago an update to Windows Installer by himself and rebooted the laptop (even though I have some turned off automatic updates what they seem to be screwing with anything these updates produce still grr)...

  I went to try and print and to found the 6380 was absent from the list of available printers... The problem is not with the wireless network (as it is trendy and functional). I don't know what it does the update of windows... but when I tried to reinstall the drivers for this printer from the disc, he acknowledged that they were already installed... So I uninstalled them instead (and it is taken up only parts of the driver remained and he removed these pieces).

  Then I tried to do a fresh driver... install that took a long time because it got stuck at the end... Finally, he came up with an error and so I tried to introduce him, HP - and received click on a desktop icon... (Icon HP - XP Installation). I tried it but it tells me to 1) Reinstall driver (done twice -) solve printing problems wireless (not a problem at this point given that I have no printer driver and I can use the network wireless for other things very well) well tried anyway... or 2

  Anyone has any suggestions please > in the past when Windows updates have caused problems, I used the system restore to roll back, but this is only a temporary solution - as Windows insists on the updates I want!

  Thank you very much!

  If you have the original HP software CD, look in the folder of the ccc/utils for a L3_unintsall (or similar).  Run for an uninstall very full.

  Reset.

  Now, download the latest version of the software for your printer from the "Support & Driver" link at the top of this page.  DO NOT reinstall from the CD (a good rule is in general not the CDs software, but to go to the website of the manufacturer for the latest and best).

• Cause problem to keep PG and RN files in $JAVA_TOP?

  For simplicity, it is easy to keep PG and RN files in $JAVA_TOP, since I can put everything on the server at the time of time by simply copying the contents of MYCLASSES to JAVA_TOP. Also, I did turn the import XML on the GSP and RNS from this location.
  
  It causes problems to keep these files in JAVA_TOP? It's the kind of hassle to separate them and sort them in different places.
  
  Thank you
  Kurz

  I think that you may have about Custom Development.

  It causes problems to keep these files in JAVA_TOP? It's the kind of hassle to separate them and sort them in different places.

  No it should not have any problem. Just after the standard of Oracle and move the PG.xml, RNs.xml in the folder appropriate to top/webui on $JAVA_TOP

  and

  AM, VO in the appropriate top/server folder on $JAVA_TOP.

  http://oracleanil.blogspot.com/2009/05/disable-button.html

  Thank you
  -Anil
  http://oracleanil.blogspot.com

• Null values for DB2 are causing problems

  Hello
  I have another problem with the link to the database to DB2 on IBM iSeries Access for Linux 64-bit OEL5 with gateway database Oracle and unixODBC 2.2.14.
  DB link works. However, null values for DB2 are causing problems. "The columns Date null on db2 return a date ' 30.11.0002 ', and the columns of characters that are null return an error ORA-28528: heterogeneous Services data type conversion error.
  isql returns the correct results.
  
  How can I fix? May set some parameters for the conversion of the data on the entry door?
  
  Thank you.

  If the driver is not fully ODBC level 3 compliant and functions of the spleen, we are lost. But sometimes drivers ODBC level 3 compliant, but lack the correct implementation of 64-bit. In these cases, we can tell the gateway to use the 32-bit ODBC 3 standard adjustment level in the gateway init file:
  HS_FDS_SQLLEN_INTERPRETATION = 32

• Absent voice memo to the homescreen on IPhone SE there is no 'utility' or 'extras' anywhere; folder Siri is voice memo, but can not get to the home screen? How to apply for voice memo on the homescreen?

  Absent voice memo to the homescreen on IPhone SE there is no 'utility' or 'extras' anywhere; folder Siri is voice memo, but can not get to the home screen? How to apply for voice memo on the homescreen?

  Try going into settings > general > reset > reset home screen presentation.

• Can software update on iphone cause problems when my computer can only move to Mountain Lion?

  Can software update on iphone cause problems when my computer can only move to Mountain Lion?

  When my computer can only be upgraded to Mountain Lion?

  Any Mac that can run Mountain Lion can run El Capitan, as long as the conditions are identical.

  

  Too little information: you must identify the model of your iPhone and explain exactly your problems. There is no way that anyone would be able to help otherwise.

• Firmware update recent Airport 7.6.7 causing problems with VoIP

  Hi all

  Firmware update of recent Airport 7.6.7 causing problems with VoIP.

  Unable to connect voip since update...

  Any help appreciated.

  Thank you

  It might be useful to know what VoIP that you use and what type of problem the update affects your VoIP.

  My MagicJack & NetTalk lines properly.

  Jim

• in iBooks author, how can I change the book ID?  I update often books and hand but ID remains the same, so it caused problems when others discover.  I wish it were as if it were a new book with a new code.

  in iBooks author, how can I change the book ID?  I update often books and hand but ID remains the same, so it caused problems when others discover.  I wish it were as if it were a new book with a new code.

  From the link 'related items' below, see:

  Give your book a new internal ID.

• It will cause problems if my new iMac has the same id and password that my old iMac that I still have and use

  It will cause problems if my new iMac OS 10.11.3 5 k has the same user id and password as my old 2008 imac OS 10.9.5

  No it just means that you can download and sync past purchases and data to iCloud

• KB975496 and causing problems KB980408.

  These two updates that I just installed caused problems with my C drive.  The disk check said he cannot work while the disk is used and how have it run at startup says it cannot do the job and use the system restore.  System Restore says that it cannot function without a check disk first.  What should I do?

  Depending on the operating system you have, and if your hardware vendor as long as you media appropriate, you can make a drive that started at the Windows install DVD while repair.

  In Vista (?) and Windows 7 boot from the installation DVD allows you to use repair tools, which is a command line.  The type of command line

  CHKDSK C: /F

  and a repair disc should be performed.

  Caution:-the last time I tried this it turns out that my hard drive was not physically, and for this reason, the disk check has failed, completely destroy the file system and cause a complete data loss.  REAR FIRST.

• In Windows XP, the $ntUninstall directories can be deleted without causing problems.

  I have Windows XP SP3 POS PC in our retail store lcocations.  These machines have a slightly smaller boot partition.  My question is, when you install updates from Microsoft, it creates an uninstall directory in the Windows directory.  So Windows XP, $ntUninstall directories can be deleted without causing problems or causing previous updates to be reinstalled.

  I have Windows XP SP3 POS PC in our retail store lcocations.  These machines have a slightly smaller boot partition.  My question is, when you install updates from Microsoft, it creates an uninstall directory in the Windows directory.  So Windows XP, $ntUninstall directories can be deleted without causing problems or causing previous updates to be reinstalled.

  The article at the link below gives a detailed explanation of the $ntUninstall directories. This should you guide as to whether or not you can remove folders.

  http://ask-Leo.com/can_ntuninstall_folders_be_deleted.html

• Event Viewer windows will cause problems with your computer

  Windows Vista Ultimate: Will be the windows event viewer are causing problems, such as freeze ups, slow down, with your computer?

  There is never for me, and I never heard him make.

  I hope this helps.  Good luck.

• Recovery system causing problems with the size of the screen.

  Due to some problems I had, I finally had to yield and perform a system recovery back to the manufacturer's specifications.  Once this is done, I downloaded all the updates to Vista, all the drivers, etc..  Everything is square and works fine now, with a big problem.  I bought a monitor 20 "a few months ago.  It worked fine before the recovery is done.  Since the resumption, the display is smaller, as if I still had the old monitor 15 '' on the system.  I did that the driver for the monitor is correct and up-to-date.  I found a way to enlarge the display of the size of the screen in an online search, but it does not clear up the problem.  For example... If I go to a site like the Pogo, the bottom of the site is almost normal size for the monitor, but the game pop up displays the size of the screen 15 ''.  I tried everything I know and can't get this last problem fixed.  Any suggestions would be greatly appreciated.  I also checked the resolution and makes sure it's OK for this monitor.  Thanks for your help.

  Do you have the driver from Microsoft or directly from the manufacturer?  If Microsoft, go to the manufacturer website and download THE latest drivers applicable on your screen and the version of Vista (Microsoft sometimes cause problems).  Does the monitor require any firmware - if so, download and install that too much of the manufacturer's web site.  You can also update the video card drivers and firmware just in case it is the underlying cause of the problem - again go to the web site of the manufacturer to get the files rather than using those available through Microsoft.

  Go to start / Control Panel / customization / display settings / and make sure that your monitor is displayed in the drop-down list.  If this is not the case, click on the box and see if you can find your monitor and then select and make the box extend the desktop to this monitor is selected.  Go into the advanced settings, click list all Modes and try one at the top, if it is not already selected (assuming that it is appropriate for your monitor).  If this does not help, try others that are compatible with your monitor to see if you can find one that allows you to achieve your goals.  It may not work, but it's probably worth a try.

  Other than that, I don't know what to think.  You already seem to have covered most if not all of the bases.  If the above does not work, maybe someone else review this thread will have other ideas to offer.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Frequent hard drive exchanges are causing problems for activation of Windows 7?

  I am new to Windows 7.    I frequently switch (turn) the hard drive on my system - say every 6 weeks or more.  I use the same set of 2-3 disks and restore my system from a disk image every time when I exchange them.   Change the drive often happens to cause problems with the activation of Windows 7?   Thank you.

  Hi Lone Star,

  Change the hard drive on systems not prompt swap you for activation but after that the HDD on another system if the operating system is validated activation would be asked that the physical address of machines would have changed.

• Would it be beneficial to allocate all its defaults for each listed default program programs or could that cause problems.

  Original title: default programs

  Would it be beneficial to allocate all its defaults for each listed default program programs or could that cause problems.

  I think it's depend on... for example, if you want to open all types of file of the video file to open in your video player favorite itz acceptable to choose program to "set this program as default"...

  But if you want certain types of video files to open with another player (with double clicking on file)... Choose the second option "Choose defaults for this program"