Adjust the threshold for rule interrupts

Similar Questions

• How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

  Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

  I assume that you use a while loop to keep the updated value.

  Add a record to offset to your looping it initialize with a U32 (time in ms)

  Add the registry to offset to your loop that keeps the previous value of your bool

  When your reaches the threshold value => the light and set the current time in your shift register.

  In the next iteration of the loop weather check value is still above threshold

  => Y-online previous set to true?

  => Y-online the next iteration

  -Online N => turn switch on and set the current time in your shift register.

  -Online N => subtract the time current less time shift record-online more then 5 seconds?

  => Is => keep turning on

  -Online N => turn given

• I have a few sequences where I don't have the option to adjust the Pan for the entire track. How can I get this panoramic option whole track?

  I have a few sequences where I don't have the option to adjust the Pan for the entire track. How can I get this panoramic option whole track?

  With an Adaptive track you get a balance option, with a standard track, you get an option of pan.

  It is the option in the track mixer.

  

• adjust the ignition for a group

  Greetings.

  It is possible to adjust the ignition for a whole group in captivate 8?

  When I select a group of properties of entire calendar menu disappears.

  each element of the group can always be selected and timed individually, but that seems counter to the objectives of the Group feature.

  any advice?

  Thank you.

  No, because a group can have objects with different maturities.  Maybe sometimes it might be useful, but I personally use groups for:

  • manage objects
  • Use groups in advanced actions, much easier in many cases as hide a group, then display an item out of group
  • use groups in joint actions: because a parameter can be an object or a group, that is a lot more versatile shared equity

  Just these examples, as a response to "..." seems counter to the objectives of the group function, where I do not agree."

• Adjust the voltage for the acquisition of data in C range

  Hello

  I'm trying to run a USB-6211 in C++ and I would like to change the voltage range of (-10V to10V) to (-1 v to 1 V). Can I just change the minVal and maxVal in DAQmxBaseCreateAIVoltageChan call? Or I have to adjust the device itself and recalibrate.

  Concerning

  Simon

  Hi Simon,.

  Thanks for your post. You're right, you just need to change the minVal and maxVal in the call to DAQmxBaseCreateAIVoltageChan. The DAQmx base driver supports the hardware of the range you select, do not re - calibrate your device to adjust the material.

  Kind regards

• How to determine the threshold for an LED voltage

  A density of current over voltage that is generated by one of my Labview OLED measurement systems is attached.  I'm trying to programmatically determine the threshold voltage.  When the data is displayed in the logarithmic scale it is possible to observe a charge injection clear (0.8, 0.000203).  The problem is that I can visually observe this value, but I'm not able to solve by program for her.  I tried to take the derivative to observe the changes of slope, but only to determine the operating voltage.  Any ideas how I could solve this value?

  Thank you

  E

  You are on the right track, you just have to do deeper. Try to take the 2nd derivative and find the points where it is larger. This will show you where the log graph is concave upward and where is your ve. I've included a plot of Log (data), D (Log (data) and D (Log (Data), 2).) I also have zoomed in on the area of interest, then pay attention to the balance.

  You may need to make some good assumptions. For example, with exactly what I posted above, you get Vth = - 0.4 or so. If you assume Ve > 0, then you get Vth = 0.8.

  In addition, you probably want to do other fancy stuff such as: interpolate the data to get more points, smooth interpolation, trim the ends of the derived data (they want 0 according to your derived method).

  

  

• Automatically adjust the workspaces for different resolutions

  Because my eyesight is not what it was, I'll have to lower the resolution on my iMac 27 inches. I use creative cloud and when I open the bridge, the interface is adapted to the new lower resolution - all windows are in the right place. But when I open Photoshop CC, the default workspace is too large for the screen - left windows are off the screen. I could go back to the higher original resolution and pull all the windows until the middle and redial for the lower resolution, and then save. But is there some sort the workspace can be done for auto adapt to the new lower resolution?

  Hi Mikesmartt,

  Since you are using an iMac, you can actually make the workspace in any resolution size by clicking the expand icon "+" in the very top left of your window (it is a small green button beside her minimize and maximize buttons).

  From your description, I understand that you have lowered the resolution menu bars are being cut off or fall out of the screen as in the screenshot below:

  

  This can be easily solved by clicking on the button of the screen adjustment on each window. As mentioned above, it is the small green button at the top left of your Photoshop window.

  

  After clicking this button, you should notice the Photoshop all resizing interface and adapt across your screen resolution:

  

  As you can see highlighted in the screenshot above, all panels and interfaces can now be seen.

  I hope this helps.

  Clarice

• No way to resize the work plan and do adjust the coordinates for lower left corner is 0,0?

  That may have been too verbose an issue.

  I noticed that when I resize the artboard of my document coordinates don't update with it. 0.0 which for me is always good in the lower left corner now becomes a task in the region. The lower left corner becomes-344,-555. This does not work for me.

  So far when I am faced with this I just made a new document with the new size I want, but it is old.

  You can always move the zero point by grabbing the corner where the rules meet and that by dragging to the location where you zero to be.  Turn on benchmarks commented to help snap to the right place.

• How to adjust the settings for the module "exit".

  Hi, is it possible to customize this that data erase with the abandonment of tobacco add on. ? via Firefox browser android or do you need to go to the website of the pc market. Thanks in advance

  Hello.

  You can do the same thing now in the Firefox settings. Abandonment of tobacco add-on adds just one button exit for Firefox, that is now unnecessary since Firefox for android has a button to leave integrated since 32 of Firefox for android.

  1. Tap the three bar icon at the top right of your screen in Firefox.
  2. Tap Settings
  3. Press Privacy

  Under 'Clear private data', check 'clear off. " A pop up will appear and you can check what private data you want to erase when you exit Firefox.

  I hope this helps!

• I need to adjust the settings for each single race: Wow, it's very... efficient!

  I want to use the pen tool with a specific style for a number of traits. If I select the tool pen, then I put the default width and profile of drawing.

  To my surprise, at the same time where I start to draw something, the parameters are all default reset! I can change later to influence what I've already drawn, but this isn't what I want.

  It's like a portrait of drawing and when you're done, you apply the desired line width, etc. I wonder what the developers of illustrator thought with thiis paranoid behavior.

  They even tried to paint a stick figure with illustrator, ever?

  Euklide,

  We are talking about the toggles between the appearance of maintains art new and Art back to basic appearance in the appearance palette?

• adjust the image for the full photo format?

  I use Lightroom 6. Not very teckie so pls be gentle.  When I work on culture, my proportions shows as feasible in only half of the picture, not all the way around it like

  most of my fellow photographers that use lightroom.  Is there something I can do to fix this?

  Thank you

  Ruth

  Please click the Option tools > tool Overlay > never show.

  Please select this option to never show, then you will not see this Option Overlay when working with the crop tool.

• How to change the threshold value

  Hello

  I want to change the default threshold my threshold of space available on the VM disk... Please share the document

  Kind regards
  Gopi

  Hey Gopi,
  If I understand correctly, you want to adjust the thresholds for alarms.
  The Foglight registry has all these variables. We recommend that if you change something, you take note in the variable about which was the default, time, reason, etc.
  In the dashboard:
  The administration | Rules & Notifications | Manage the registry Variables
  In addition, you can change the rules. If you want to change the rules, please COPY the rule and disable the original rule. Make changes to the copied rule.
  In the dashboard:
  The administration | Rules & Notifications | Manage rules
  VFoglight documentation is available if you connect to the site Vizioncore, go to the Downloads tab and then select the content sub-tab.
  If you have a more specific question, please just after it.
  Thank you
  -dave

• I forgot the password for VPN record how I opened

  First I have to buy the phone add password for VPN and I forgot how I fix this

  You can try to perform a repair of the system as it will be your phone factory reset or below, try to perform a factory reset, but in order to achieve a system repair

  Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
  Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when you are prompted, always connect your phone off press and hold volume or back button - this should begin the process of repair or reformatting

  If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

• HP Photosmart Premium - how can I hold the settings for the copy?

  I have a HP Photosmart Premium.  I want to make photocopies at 70% the original size.  Notice that I must do this in the glass and not the bin because it's in a book.  I have to know how to adjust the settings for this, but I DO NOT WANT to have to put in the settings every time for the next 38 pages.  Is there a way to keep the settings temporarily?

  HI, in the menu copy, perform the required settings. Then find the line "set as new default" and click ok. Set as new default value must be in the menu to copy as well, it should be the last option.

• How can I change the settings of the clock for Trinidad and Tobago

  My computer clock has changed, but I can't seem to stay on the exact time of Trinidad and Tobago and does not change to or from daylight saving time. The climate is tropical and our time never changes, but the computer changes, so I want to stop time to change.

  Uncheck you automatically adjust the clock for daylight saving time in the time zone settings?