Adjustment of separation between the notes
How to adjust the spacing between Notes Pages 5.6?
P.S. This question seems to be recurring much in this forum. In the past, it was thanks to a non-intuitive location of the setting in the settings of 'Document '. Recently, it's because he disappeared from there...
The ability to separate the reference entries according to a value specified in Pages v5 has not disappeared.
Tags: iWork
Similar Questions
-
Semi colon separated between the values
Hello
I have a table:
CREATE TABLE TEST_A
(
ATT1 VARCHAR2 (10),
ATT2 VARCHAR2 (10),
ATT3 VARCHAR2 (10),
ATT4 VARCHAR2 (10));
INSERT INTO TEST_A
VALUES (NULL, 'A', NULL, 'B');
INSERT INTO TEST_A
VALUES(,'D',,'E');
COMMIT;
I want that the output voltage: select * from test_a as:
A; B
D; E
I want a semicolon separated between the values. If the first column has no value, it must not start with a separator semicolon.
Thank you
SELECT a.*,
TRIM)
BOTH
';'
OF REGEXP_REPLACE)
Att1 | ';' ||
att2 | ';' ||
att3 | ';' ||
ATT4,
';+',
';'
)
) att_list
OF test_a one
/
ATT1 ATT2 ATT3 ATT4 ATT_LIST
---------- ---------- ---------- ---------- ----------
A B A; B
D E D; E
A ASQL >
SY.
-
Separator between the left and right.
The generated WebHelp has a separator (used to resize) which divides the left pane (TOC) in the right pane (main content). This separator has a border and therefore appears as a thick gray elevated line. I would like for the separator to a border and so it will appear as a thin gray line.
The way to proceed is to specify frameborder = "0" in the < frame > tag to the right pane. However, if I change this in my start page (after generation), this frameborder = "0" is simply not applied do. Can someone tell me what I'm missing?
Thank you
KYou get a free copy of the Skinny on skins of Rick Stone tutorial. It is essential for this kind of thing!
Good luck
Leon -
most unique separator between the key and the value.
Hello
I need to write some implementation of a key delimiter value, while demand will insert this value and the delimiter that is not defined in the db.
After that, I need to retrieve the key and the value, the question that this delimiter is defined by a custom code and it might be something.
My problem starts when the delimiter that defined by custom code will be part of the 'key' or\and 'value '. in this case, the index of the key and value of the analysis or split or any regex-based will give the wrong key and value.
Please advice, what is your suggestion for m searching the Internet to find any piece of information that can help.
Thanks in advance.
These examples are not relevant if your use case is not the same thing as what this code is from.
1. you now have the rules.
2. you have Java class files that implement these rules for a defined set of data types and work delimiters
3. you have the Java source code for these class files so you can see exactly how the rules are applied and how specific types of data, and the delimiters affect the process.
It is up to YOU to determine if the existing code will do what you need and, if not, to change this code (or write your own) that implements the rules for your use case.
You have all the information you need to do the work. Nobody on the forum, and certainly not me, is going to write your code for you. If you can't do the job when you have ALL the necessary information then you will need to hire a consultant to do.
Any other help is possible.
-
Using the step input method, I entered a number of 1/2 notes in the piano roll Editor.
Then I selected all my notes and decided to shorten all 1/4 notes after realizing that the pace was too slow.
The problem is that I now have many empty spaces between the notes of 1/4:
Is it possible to eliminate all the spaces between the notes at once with all selected notes notes?
Or I have to manually move each 1/4 at the end of the previous note footnote 1/4.
I think there must be a quicker way to do this.
Select all under the Edition of the piano roll Editor menu or command button has
Then enter the end of a single note and all selected notes will also expand.
-
Under account settings > account > Copies and folders > Bcc these email addresses, which is the separator between multiple addresses? Using a space between addresses gives an error message.
THX, Jon
Try a comma.
He did this in the BCC or CC BOX when it's empty, but is not too useful when you already have something there.
-
Original title: high speed HDMI does not.
I plugin the HDMI cable between the PC and the TV for watching movies, but it has no sound and the image.
Hi lisa,
Try these steps and check the result.
Step 1: Manage audio devices
a. Click Start and then click Control Panel.
b. click hardware and sound.
c. under sound, click on manage audio devices.
d. click on the playback device you want to output sound. Right-click in the empty space and click on see the disabled devices to see other devices.
e. Select the device and click on set as default and then click OK.See http://support.Microsoft.com/kb/953500
Step 2: Graphics output to monitor
a. right click on the desktop, click chart options.
b. output to monitor.Step 3: Adjust graphics hardware acceleration
a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
b. click Advanced settings, click the Troubleshooting tab and then click on change settings.
Note: Some video card drivers do not allow allows you to change the settings.
c. move the hardware acceleration slider at different levels and check the result.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Need to reduce the spacing between the text and notes
I'm a style guide (self-taught librarian InDesign beginner!) editing and need to lesson the space between the end of the line of text and the note (if I can get everything on a single page.) I use a textbox with the comparator service. I know that one of the Options reference should do, but when I change the options of first reference offset it messes up the leader of the references as well (which should appear only spaced.) Any advice would be greatly appreciated. Thank you!
Try to check the option «Place end of history notes...» "under investment Options and adjust 'Minimum space before first note' under Spacing Options.
-
My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n
A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.
Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.
-
Not switching devices not between the bases of the airport?
Hi all!
I write because that through my research, I have not found quite the answer.
I have 5 Airport extreme (AP) in my house. One of them is connected to the ISP (this also ISP DHCP box) box. All of them are set up to extend wifi as a long string.
The problem I have is that I can't connect the AP via ethernet, creating a network of "roving". Is it possible to approach but?
Because currently my devices switch base station that I propose. If I was connected to the AP1 and I'm still in the range of it, I don't connect at the base next to me (which has a faster speed of the internet) and my connection is slow/drops.
Is there a solution?
Thank you!
Best
Alex
The problem here is that wireless between the airports will not quite work... If they work at all.
You have a 'main' AirPort Extreme connected to your ISP modem/router using an Ethernet cable, and the airport is to 'create' the main wireless network... is that correct?
And, you want the other 4 airports to extend wireless signal from the 'main' airport... is that correct?
If so, then all the following 'rules' must be applied:
(1) your 'main' AirPort Extreme must be at the heart of your home
(2) each airport expansion must be on the same distance from the AirPort Extreme
(3) each extension airport should be located, as it is closer to the 'main' than any other Airport Extreme AirPort which is the extension of the network
The reason is that Apple offer wireless are works such as the hub and the spokes of a wheel. AirPort Extreme 'main' would be 'hub' and each of the 4 Extenders would be located at the end of the separate 4 "rays". In this way, each extension connects directly to the 'main'... airport which is the only way an airport can extend wireless network.
In other words, you cannot "extend" the network several times. Although you can have multiple extensions, each of them must be connected directly to the "main" airport They cannot connect to another airport that extends the network already and lay it again.
So, please tell us how well your current configuration meets the 3 above for a comprehensive wireless network.
-
I'm talking here about how the date of different e-mails appear in my Inbox. I have a / between the month and the day, and a / after the day, but I did not / between the year and the month.
TB uses the date format short, such that defined by your operating system, which, in the case of Windows, is located in the Panel control/region and language.
http://KB.mozillazine.org/Date_display_format
There are a few modules that might also be useful:
https://addons.Mozilla.org/en-us/Thunderbird/addon/ConfigDate/
https://addons.Mozilla.org/en-us/Thunderbird/addon/Super-date-format/
http://chrisramsden.vfast.co.UK/3_How_to_install_Add-ons_in_Thunderbird.html
-
OOP - how to pass variables between the branches of the object, but not instances of VI
I have a main VI where a thread object goes through some subVIs initialization and then branches off into several parallel loops. My understanding is that each branch becomes a separate instance of the object. Data is passed between the loops using global variables, wrapped in the accessors (I can change this if someone has a better approach - reducing to a minimum the memory and the CPU usage is very important).
I need to have a large number of instances of the main VI running at the same time. What would be the best way to ensure that the data transmitted between the loops of one instance of VI do not interfere with the data transmitted between the loops of another instance of VI?
Thank you for your understanding.
Ah, you're right. Stupid mistake on my part. It's all working now. The corrected code is attached.
-
dad bought me a computer PORTABLE from NUTRIGEST I HAVE BEEN out of the CITY FOR SOME TIME AND LATER BETWEEN the AUTHENTICITY CODE PRODUCT, AND IT's not SAYIING VALID, BUT I KNOW THAT can NOT BE TRUE
If it is a new machine call or go to circuit city and get them fixed. If they sold you the laptop, indicating that it included Windows XP then the onus is on them that provide you a valid COA and the product key.
John
-
PersistentStore is not persistent between the device restart
Hello
I use the PersistentStore to store a hash table with an integer simple mapping custom of POJO. It seems to work between the restarts the application, IE, I can totally my application and restart and persistent data are restored. However, after a reboot of the appliance, such as pulling on the battery, the data are there not more and everything is reset to 0 by default. Same thing happens on the Simulator.
I certainly call the commit() every time I change the contents of the table of hash and that in a thread safe way. Nothing appears in the journal of the events, or all exceptions...
It's with OS 4.6.0 and in this case a "BOLD".
One with ideas or similar issues that I could hurt?
Thank you.
Daniel
Right, I found the problem: all the objects you want to persist must implement the Persistable interface. Too bad there is no word about it in the JavaDoc of PersistentStore and PersistentObject and too unfortunate that PersistentObject.setContent () takes an object as a parameter instead of an instance of a Persistable implementation. That probably has to do with the fact that the implementation allows implicit persistables objects as the Java object representatives for more than native data types Hashtable and vector.
-
Switching between the quick adjustment sliders
I've always used Adobe Camera RAW rather than Lightroom and keep people telling me how great Lightroom is. I always thought that both programs were essentially the same, but it does things in different ways, that's why when Lightroom was released I don't bother watching it, 'if it isn't broken"etc.
Well one reason I want to explore changing is that Adobe Camera RAW is VERY very laggy and Lightroom seems to be more keen to make adjustments to images.
Just one problem though!
In ACR I uses a Wacom stylus to draw culture boxes, do zoom and the adjustment brush among other things. To adjust the images I use the keyboard tab key to switch between the sliders to increase or decrease exposure etc. It's fantastic; as I cursors stored almost in their order, I can look at the picture of all the time and move the sliders around using only the tab key. In Lightroom however I can't switch between the sliders with the tab key and must watch the sliders (rather than the image) to enable a cursor and make an adjustment. It's very frustrating and counterintuitive to effectiveness of time I have spend more time to a cursor to click on it instead of simply by pressing the tab once, twice etc. depending on which slider I selected. If I use SHIFT and tab together that I can go back the other direction.
Is there a way to Lightroom to switch between the sliders without having to always click on them? It's extremely annoying.
I thought about it. In ACR you need to do is press the tab key to switch between the sliders in LR you first click in a box to the number (one) before it you can use the tab key to switch between the sliders and then use the arrow keys to make adjustments - Hooray!
Maybe you are looking for
-
e-mail on the left side settings were all mixed up with another user.
When I opened my email in the past, it showed my e-mail, Inbox, junk and trash. Now it shows my email address, email address of my wife, then a list of various records. I can't find some way to put them in the right order. Walter Lucas
-
Looking for a backup initiated from my iPhone 6 s +. Needed to leave before it's over, so I typed "cancel backup' which doesn't seem to work. Six hours later the wheels always turn around. Message on the screen said "Turning on Backup" - it turns a
-
Hi all I have a question about wireless network. Can I pass data between the nodes? Here's my setup. I have WSN 9792, WSN-3202 (node) & WSN 3230 (router Mesh). I want to get a similar measure on WSN-3202 and send it directly to WSN 3230. I try to use
-
my Media Player is popping and jumping ive tried everything that was suggested
my Media Player keeps popping ive tried the suggestions online nothing worked
-
Hello I created a new user in AD (Server 2003). When I connect with the user account that reflects on the one hand by car, it not there no batch file or a script in advertising for this user profile. I don't want user to access this part by car. If a