Why my display of the date of the mailbox does not have a / between the year and the month?

Similar Questions

• Unable to connect to the Internet, error: this computer does not have a network adapter installed and configured

  Original title: basic computer.

  I have a Dell with windows vista. He has been in place and slow so I reinstalled the program. Now I can't access the internet. I get an error message that says that this computer has a network card installed and configured. I have a linskeys wireless router and we have two laptops that work very well. Don't know what else to do.

  Hello

  Go to the Dell website and download the drivers for your model computer.

  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection?FKEY=Drivers_PS

  Use one of your other machines > download and save the drivers, network adapter, etc > copy of Flash Drive > transfer and install them.

  See you soon.

• Windows Media Center EPG does not have the correct data

  Windows Media Center EPG on my computer is so ugly!

  Description is separated in two, and it's always the last part that displays first, so you'll have to roll down to the bottom to read the description.

  The series is difficult to use, because the series 1) is not always marked as series (so you can select 'plain' Record), and 2) the title contains often series of numbering (e.g. "the bodyguards (1:6)"), so even if it is marked as a series, it will record ever "Guards body (2:6)" or other titles (the Media Center will just try to record any episode of "Bodyguards (1:6)").

  It is the broadcaster who create * data, and then displays in Media Center via Broadcasting Dataservices Ltd., or who are the last to blame?

  What is MS Media Center that does not have the correct data?

  I am in Denmark, if this has an impact on the response.

  Thank you and best regards!

  Hello

  Thank you for your response. I appreciate your time.

  I suggest you to post your query on our MSDN Forums, as this issue should be better there.

  Please refer to the reference to the link below to send your request:

  http://social.msdn.Microsoft.com/forums/en-us/home

  Hope this information helps.

• Why do I need the monthly 'Apple music' subscription?

  Why do I need the monthly 'Apple music' subscription?  I do not buy music... ever!

  You don't 'need' to an Apple music subscription, only keep it if you're going to use it or cancel the subscription.

  You probably are just signed up to the free 3-month trial, you will need to cancel before 3 months is up if you do not want to start paying for it.

  View, change or cancel your subscription - Apple Support

• I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

  I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

  The "import" tab appears only when the iPhone is connected to the Mac via a USB port.

  ITunes detects your iPhone when it's connected?

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• Why Motorola does not have hands-free in the bike box?

  Why Motorola does not have hands-free box?

  I have all kinds of helmets that work very well.

  As to why the bike not turned in the box - I would say that most people do not use them. You may disagree, and perhaps it is regional. But looking around the United States and the European Union, most of the people with cell phones do not use wired headphones. And the few people I know that do, tend to buy a different brand of what is in the box.

  In the United States, you can get them in many stores for less then $10 for Motorola is saving most of us who do not use wired headphones. I have a set that runs in my backpack as a backup, but I always forget it's there and use the phone without it.

• PC health check-up according to my monitor does not have the minimum required display settings and change the DPI by default survey

  Original title: DPIdefsault level

  I am trying to install a pc health check-up for my laptop but it says my monitor does not have the minimum required display settings and change the default DPI level.  How do I do that?

  What version of Windows?  You can change the DPI on Windows XP but right click on your desktop, choose Properties, selecting the tab settings, clicking on advanced and change the dropdown to DPI.  Other versions of Windows have similar steps.

• Thunderbird does not all files except "inbox." and against the info 'aid', there is NO 'account settings' under 'Tools' & I have the latest version of T.

  Thunderbird does not all files except "inbox." and against the info 'aid', there is NO 'account settings' under 'Tools' & I have the latest version of T. I just need to download the SENT MESSAGES, Inbox not only.

  Re: Where is 'account settings '.
  If you do not see 'Tools', then you do not have your active 'Menu Bar'.
  See picture below on the activation of all the toolbars make life easier.

  Different methods of location of the 'account settings ':
  Via the toolbar "Menu Bar":

  • Tools > accounts settings

  Through the pane of folders:

  • Right-click on the name of the e-mail account in the folders pane, and then select "settings".

  Via "Menu Icon.

  • Menu icon > Options > account settings

  Re: I need to download sent Messages Inbox not only.
  E-mail accounts IMAP see a remote view of the files on the server.
  You subscribe to view these folders in Thunderbird.
  You synchronize directories subscribed for a copy in Thunderbird.
  What you do in a folder for example imap: delete, will occur on the server, so viewing via webmail or Thunderbird folders appear identical.

  However, in your case, it seems that you have created a POP e-mail account.
  E-mail POP accounts can only connect to Inbox server and download server Inbox for the Thunderbird Inbox pop e-mail account.
  It's not a quirk of Thunderbird; This is how all Pop mail represents the work.

  There is a work around to get "sent" in the folder mail sent from server in Thunderbird. You just do it once, because when you send it through Thunderbird, it will put the e-mails in the folder sent TB pop mail account and not on the server.

  Thunderbird creates a "Sent" folder when first send you an email.
  So, if you have not yet sent an email, please send one, even if only to yourself.

  Then, move all inbox emails in the appropriate folders.
  You can create new folders to organize them.

  How to create a new folder:

  • Right-click on the name of the e-mail account, and then select "new folder."
  • Give an appropriate file name and click "create a folder".

  When the Inbox is empty:

  • Logon to the Web e-mail account by using a browser.
  • Move all emails "Sent" in the "Inbox".

  In thunderbird:

  • Click on 'Get the message'

  all the "Sent" emails must get downloaded from the server Inbox anto your Inbox in Thunderbird.

  • Then move all your emails in the 'Sent' Thunderbird folder.

  You should now have all these emails downloaded from the server and display in Thunderbird.

• Buttons to blend into the background. Button menu to open does not have a menu.

  Button, button "home" to move forward, back, bookmark this page button, show your bookmarks and open menu buttons are present, but you can not see them. Button menu to open does not have a menu drop-down.

  . Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  More information on the resettlement of Firefox can be found here.

  WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!

  Please report back to see if this helped you!

  Thank you.

• Wireless devices shows the MAC address for 1 device that does not have an IP address

  I am tracking down each device connected to my router nighthawk and I identified everyone except this. There is a device of Wirelsss appears when I connect to the router that does NOT have an IP address but it has a MAC address. An interesting point is that the router device itself has a number of MAC that is not anywhere in the list of devices. Any ideas what this could be? I have an Extneder range wireless attached Nighthawk also but I already idenfified his IP address and Mac address.

  How a device could have a mac address, but not IP address?

  Why the address of the router device do not show in the list of anywhere?

  Try to turn off the Extender and see if that will fill again.

• BIOS update failed: the process does not have this system. The process of the utility is not complete.

  I have a Thinkpad T450s and I'm trying to update the BIOS version 1.19 to 1.20. I've created a live usb with the 'el tortio' - image extracted using linux "dd". Once I boot on the USB under Legacy-BIOS and select upgrade, it proceeds witht the error message "the process does not have this system. The process has been cancelled. "I have disabled the protection against theft, AMT (I think this is the option) and I'm sure that I use the correct .iso file from the downloads section. I don't have a Windows operating system installed, but I'm able to start in various linux distributions using Legacy and UEFI methods.

  Here is my BIOS information.

  "Manage 0 x 0031, DMI type 0, 24 bytes.
  BIOS information
  Seller: LENOVO
  Version: JBET54WW (1.19)
  Release date: 06/11/2015
  Address: 0xE0000

  Runtime size: 128 kB
  ROM size: 16384 KB
  Features:
  PCI is supported
  PNP is supported
  BIOS is extensible
  BIOS shadowing is allowed
  Boot from CD is supported
  Selectable boot is supported
  ACPI is supported
  Legacy USB is supported
  BIOS boot specification is supported
  Targeted content distribution is supported
  UEFI is supported
  BIOS version: 1.19
  Firmware revision: 1.2 "

  What could you suggest to get the update disc to recognize my system?

  I think I've fixed the problem, I formatted FAT16 USB drive and not in FAT32 and also when you use the geteltorito command, it is preferable to use the-o option rather than a redirection ">"syntax. " An article said that it is best to drop in a DOS command line using the USB boot, then run dosflash.exe from there, however, I could not edit the .bat file, but it is an option however.

  I hope this helps someone stuck in a similar situation.

• I can't create an installer, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...

  I can't create an installer on LabView, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...

  Hi, Shada, this can happen if you include additional installers to your installer for example DAQmx. When you do this the installation program must include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder he updated MAX, so when your Installer try to understand MAX, his request the source where it was installed in your computer in this case Vision Builder.

  Here you can cache information so it is not asked once again, or you can download a version more recent fo DAQmx, then it will update MAX and change the dependecy.

  You can find more details about it in this KB:

  3S88PJMY knowledge base: why do I get an error message 'Missing Distribution' when you try to build an install...

  And to keep a copy, here's more information:

  How to stop missing delivery Notification whenever I build an installer?

  Best regards

• error message "this file does not have a program associated with it to perform this action." at the opening of the local drive E:

  Hey,.

  I have a problem and I can't understand it. This error message comes out when I opened only local disk E:

  I have 2 HDD on my computer... 130 and 250 GB of both of them I do 2 partion so there C: D: E: and F:

  C: is my windows data and 3 others my data. When I open my computer and then click on local disk E: error message comes out.

  the error message is "this file does not have a program associated with it for performing this action.". but local disk E: can open it using Explorer tree (left side of the windows Explorer) or windows Explorer.

  THX

  Hi, Flix_is_here,

  Download this file and unzip it and then double click on it and let it run, it will restore most all default files for XP associations

  http://social.technet.Microsoft.com/forums/en/itproxpsp/thread/b48c2165-85f6-48bd-ac0f-be51dbf87f3d

• This computer does not have an enough space to the temperory files: error Code 0 x 80004005: upgrade of Vista

  Hello

  I am trying to upgrade to Vista home premium, Vista ultimate, but get the error continues on the execution of the installation program. Here is the error msg:

  This computer does not have a sufficient space for temporary files. Windows installation needs at least 445 MB of space on any partition for temporary files

  Error code: 0 x 800004005

  I want to just point out that I have 4 partition and each partition have at least 5 GB of free space on the disk with one of them having 35 GB of free space.

  Would be grateful if someone can help me solve this problem

  Concerning

  Vik

  Hello Vik.in,

  If you upgrade your Windows Vista,

  1. Open Control Panel by clicking the Start button, and then click Control Panel.
  2. Click on system and security.
  3. Click on Administrative Tools.
  4. Double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  5. In the navigation pane, click on disk management under storage.
  6. Select the volume that contains the existing installation of Windows Vista. In general, it is the C drive.
  7. Right-click on the volume and select Mark Partition as Active.
  8. Click Yes to confirm the action

     Note At this point, the existing Windows installation will not be able to start until the remaining steps are complete.

  9. Close computer management.
  10. Insert the Windows Vista DVD.
  11. Restart the computer.
  12. Use the Windows Vista DVD to start the computer.
  13. Choose the desired language and keyboard settings and then click Next.
  14. Click repair your computer at the bottom left of the screen.
  15. When you are prompted to repar startup data, click repair and restart.
  16. After the computer restarts, repeat steps 12 through 14.
  17. If your computer has only one installation of Windows, click Next. Otherwise, choose the correct installation of WIndows, and then click Next.
  18. Click on the link of the Startup Repair tool .
  19. Click Finish once the repair is complete. The computer should reboot to Windows Vista.
  20. Start the upgrade using the Windows Vista DVD

  Here is a link to the article that talks about it:

  http://support.Microsoft.com/kb/928232

  Hope it would work, answer back if it does not work.

  See you soon
  Syed Irfan

• Windows search service couldn't start. The system does not have the specified path. How can I fix it?

  I'm having a problem where IE takes up to five minutes for a web page.   I see the mistake of follow up in the event viewer:

  Log name: System
  Source: Service Control Manager
  Date: 14/08/2012 21:14:10
  Event ID: 7000
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Owner-PC

  Description:
  The research service Windows could not start because of the following error:
  The system does not have the specified path.

  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event ">"
   
     
      7000
      0
      2
      0
      0
      0 x 80000000000000
     
      391647
     
     
      System
      Owner-PC
     
   
   
      Windows Search
      %%d Ko
   
  

  When I run the program Microsoft FixIt Center I get 3 error messages that do not reach the difficulty.

  ---------------------------------------------------------------------------------------------------------

  (1) Windows Search is crashing or not fixed failing

  Windows Search crashes or breaks down after that that she has started.  In addition, an event ID 7042, 100 or 1000 is logged in the Windows event log, or the Windows Search Service is not running.

  (2) search Windows does not start and gives an error message no fixed

  Windows Search does not search results show and there is an error at startup.  A 3024 or event ID 1006 is logged in the Windows event log, or the Windows Search Service is not running.

  (3) Windows search shows no results not fixed

  Windows Search shows no results.  In addition, an event ID 7040 is logged in the Windows event log, or the Windows Search service is not running.

  ---------------------------------------------------------------------------------------------------------

  Someone at - it solutions?  Oh, I'm running Vista 32 Home SP2

  Thank you

  Hello

  Did you change to the computer?

  I suggest you to see the links and check.

  The problems with the search

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-searching

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance