ADL no longer display the window
I have a problem with the ADL. When I try to test a project, the ADL is open, but it shows me without window!. When I pack up the application and install it in my computer, it is works OK, but to develop it is very annoying. I use a MAC and Adobe Flash Builder 4.5
Any help is very welcome!
Thank you
Patricio López
Problem solved. The problem was the complement of Firefox Flashbug. It modifies the mm.cfg. All I have to do is to clean the var PreloadSWF and it works!
Tags: Adobe AIR
Similar Questions
-
HP Pavilion dv6000
T5600 Intel processor
2 GB of RAM
Vista 32-bit operating system
This is the first time we had a problem with this laptop
Last night, that the laptop has gone through several sessions of startup repair - none could help Windows running again.
I feared a failure of the hard disk so the next day, I ran a diag of BIOS hard disk. All tests passed.
This morning I tried again to turn on the laptop and it worked execpt the color windows logo four is missing on windows to the opening screen. Appears in the bar of the process. And it seems to have very well come in addition to the missing logo.
The only other thing is that it is disconnected for about a week. Last night, I noticed the "lightning bolt" light was on and today it isn't.
Thanks for your help
Try the http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01997899&tmp_task=solveCategory&lc=en&dlc=en&cc=us&lang=en&product=1842155 market
-
turn on computer
request password to connect
Enter the password
Displays the windows logo
loops back to enter the password to connect
If I press F8 repitedly monitor goes blanck (upper left) SYSTEM DISABLED
You can get as an administrator (you know, fake out)? If so, you can check in Applications under all users of Docs & settings for a kind of beginning of the app that is a failure; worst case, you can at least create a new user from there...
-
Re-installing Dell inspiron 19 has windows 7
People,
I have a Dell Inspiron 19. The Dell of Dell diagnostics disk utilities & drivers say all right. It is a Seagate 320 GB drive. I installed the drive on another computer and used sea tools to erase the disc. Then I created a partition and marked as "bootable".
When I try to use the Dell reinstallation DVD Windows 7 Home premium SP1 64-bit, it crashes when is about to display the windows logo. A few pixels logo show and then it's there. Any ideas? I worked on it for several days. Really a "stumper" for me and I did something like that for years!
Original problem seems to be a massive viral infection (owner had no active antivirus software installation!) which led to the non-bootable computer. After working on this for a while, I decided to just do again it.
Miles
Located in the beautiful valley of the Shenandoah in Virginia
Hello
Here's how to use the Dell Windows 7 disc according to Dell:
If you have problems with it, try to Support Dell because it's their software:
http://support.Dell.com/support/index.aspx?c=us&CS=19&l=en&s=DHS& ~ CK = mn
Or try the Dell Support Forums:
http://en.community.Dell.com/support-forums/default.aspx
And these are some Vista Forums you are in.
In Forum Windows 7 install:
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all
See you soon.
-
Z5 no longer displays the number of notifications that I have on each app
Given that I've updated the marshmallow last night, my Z5 no longer displays the number of notifications that I have on each app :-( Does anyone else have this problem? Notifications will still appear in the notifications bar, but not on the applications themselves (the few).
I just got some information about this. This is due to the fact that the snippet of code (API) which has been used by applications such as WhatsApp Messenger, to display unread messages, was not official, and is obsolete. The new API is shared among the partners and will require implementation on the side of the partner.
-
The Task Manager window only displays running applications and without tab at the top of the window nor allow me to use the X th close the window.
How to restore the window to its normal appearance?
Although written for Windows XP, the resolution found in this FAQ is always applicable.
-
clock in the notifications box no longer displays the date beneith the time
Series HP Pavilion HPE h8 - 1360t running Win 7
When I ran Setup and decided that I needed to install the software, I notice that the date is now displayed in the tray under the era. I was happy that I is no longer my clock application to display the date.
Now that I've installed all the updates and my usual software, the clock in the notification area displays only the time. The date seems to have disappeared.
I don't know what I've done or installed to make it disappear. I can't find a way to recover.
Is there a software switch somewhere that turns on the display of the date of the clock?
Normally, the 'taskbar' are a height of 'one'... the time is displayed. If you unlocked the "taskbar" and stretch up to a height of 'two'... the time, day and date will be displayed. Thereafter, be sure to lock the taskbar to prevent change.
Please send Bravo
-
OP: Problem with Windows XP service pack 3__ firewall settings
When I try to view the settings of the firewall, a dialog box appears saying "Due to a problem not identified, Windows cannot display Windows Firewall settings".
I read a thread on a file to merge with the registry of XP SP2. I did not like I do not know if it would work with SP3? or should I do something else?
In addition, why is that happening? What is the problem with the Windows Firewall? If this has happened for some time is a Microsoft patch that can be downloaded instead of trying to make mergers of registry (I'm not very happy to do).
Thank you
"See if it's the same window that you see - Windows cannot display Windows Firewall settings" error when you access the firewall settings in Windows XP
If this is the case, then follow the steps put in place for Solution for case 1: MowGreen Expert from Windows IT Pro - consumer safety -
How to display the window contextual adf?
Hi guys,.
I have a problem on the < af:popup >.
When the window opens and the first element is clicked, ref-popup is displayed correctly. And after that the first popup is closed, when I click on the second element, the second popup is not displayed correctly.
What could be the problem?
When I clicked on the first point,
When I clicked on the second element,
When I clicked on the second element, RefPopup must be displayed
You can try af:iterator
-
I tried to search the frequently asked questions and did a search first. It did not work, what I found F9 turns the initial contacts on and outside, but does not solve the problem with the component being wrong.
Until a very recent update (last week or two at the most) when I type writing, the contacts pane in the window of writing have shown my address book. Now it shows some kind of research, that I can't use because I have to see all the entries to see which ones I want to send an email. In some cases, I have multiple entries for a person based on their having several email for different types of e-mail addresses. Try to remember those who want DOESN'T WORK for me. I can't get this behavior in safe mode. As an alternative, I need Thunderbird to save my setting of safe mode, so I don't have to reconfigure the SafeMode whenever I have to restart windows or restart Thunderbird. I currently come in default safe mode
I tried to remove and then install an older version of Thunderbird and the pane bad contact on the left was there. I can't find any setting to change the part of that wrong at the old I need. I would rather not try to reinstall win7 pro from scratch for this problem, assuming that would fix it.
I am running windows7 64 bit pro
It was very strange. Now things work properly and I don't know why. I want to thank everyone for their help. The image shows the first letter of the contact you want on screen messages write with the address list. Before it wasn't to show a list of addresses, just search options to search for address books. I think I'm more confused then I was before. I'll try a reboot and see if the message of Scripture remains fixed.
Once again, thank you for all the help and hope that the correction is corrected.
-
Firefox opens reduced to a minimum and may not display the window upwards (PC)
Firefox "opens" when you click on it, but the window does not appear. Hovering over the icon, the window is visible, but will not appear when selected. Uninstalled and reinstalled Firefox; "Parentlock" rebooted, removed and several other fixes.
Could you send us a screen capture when you are hovering over the icon?
Otherwise, you can try to start Firefox in Safe Mode.
- Close Firefox completely: open the Task Manager, find the firefox.exe process and end it.
- Launch Firefox by holding down SHIFT on your keyboard.
The Firefox window appears normally?
-
This extension Add on "Disconnect", after the upgrade to Firefox 29 now shows only a tiny drop-down box when the user clicks on the vs. all of the menu drop down. Before upgrading it worked fine. It does this in addition to the icons of tool at the top right of the window (to the left of the drop-down list new Firefox) or adding to the Firefox menu itself as an additional icon. The extension appears to work in regards to blocking add/continuation, as before, just cannot see what is on the menu drop down. Already tried disabling and no reactivation, no change.
Hello pkoof, please directly contact the developers of extension by means provided on the home page - they can probably give you more detailed advice and are the only ones who can fix bugs or make necessary adjustments in the addon for new versions of firefox. Thank you...
-
When started grab memory until that well over 1 GB, then hangs without displaying the window
because the window was not shown, that I can't do anything like turn off Add-ons; It all started when I joined a large mail message although it is perhaps not related.
Is no evidence, except a bad version of McAfee which has people wondering what they were doing.
-
What browser opening no longer displays the mode full screen
When I opened my browser, I now only have one quarter of the screen and manually do full screen by right-clicking and selecting full screen.how do I restore it when I open something it shows full screen?
When I opened my browser, I now only have one quarter of the screen and manually do full screen by right-clicking and selecting full screen.how do I restore it when I open something it shows full screen?
See if it works for you.
I don't have any other browser except Internet Explorer. So I have to use it as an example...
Open Internet Explorer > do not click the button full screen top right > manually use your curosr to expand or drag the window to full screen > exit Internet Explorer > re - open IE.
It opens in mode full screen now?Do not forget this: window remembers the size of the last time it was opened. If it was opened and closed in fullscreen, it opens in full screen the next time.
Another method which can achieve the same result > if your browser icon is a shortcut.
Right click on your browser shortcut > properties > shortcut at the top tab > in the position to RUN, use the pointer, and then select Maximized > click OK when finished.
It opens in mode full screen now?For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
How to display the window test animation Flash CS 6 smaller?
I use AIR for iOS and the scene is 1152 x 1536, whenever I have test the movie, that it seems in full resolution and it is difficult to see everything. How can I make the window test movie appear smaller when I press Ctrl + Enter (test movie). Thank you.
You can make the window smaller by dragging to change its position and then clicking on file/close. then re - test.
You can click on view/Zoom to allow the view/zoom out to see the full stage in the small window.
Maybe you are looking for
-
I have LabVIEW 8.0 and 8.2 loaded on my computer. NIScope 3.0 is compatible with LV 8.0 but not with LV 8.2. It looks like NIScope 3.5 working with LV 8.2 but not with LV 8.0. Can I load multiple copies of the NIScope on my machine? Thanks in advan
-
Hello I'm running a Windows Server 2008 R2 and over the past two days, I started getting this message after reboot The exception unknown software exception (0xc0000005) occurred in the application at location 0x7da5f90c Click ok to terminate the prog
-
Are there any checkbox to remove daily call logs?
As I'm just getting used to my compact Z3, on my previous Samsung, at the end of the day, I would remove my call logs. Usually, I would be including the button 'all', before you delete the end of the day, or I would just click on 'all' and deselect t
-
Lost 'remove hardware safely '.
-
Q10 of blackBerry software update failed
I tried to update my software (version 10.2.1.2977), but every time I do it just indicates the update has failed. Access to internet is very good and it is connected to a power source, but nevertheless does not seem to work.