administration system

Similar Questions

• Cannot open gpedit on Win 7 after activation of the User Configuration administration\systeme ordinateur\modeles settings

  I opened gpedit and navigated to the Configuration\Adminstrative administration\systeme user.  Then under setting I clicked on "run only the Applications Windows specified, set it to on, then in the section show Options clicked the button next to the"list of authorized applications.  I typed in a few apps clicked ok and closed gpedit

  When I tried to come back in gpedit, he gave me the following message: "this operation has been cancelled due to restrictions if effect on this computer.  Please contact your system adiminstrator. »

  I am an administrator on this pc, but it won't let me do anything.

  Help, please!

  You yourself locked out.  A restore from a previous backup (you do not have a right) or a repair installation of the operating system dvd can fix this.

• "The administrator system has set policies to prevent this installation" error install Steam .msi program

  Hi, I am trying to install the Steam (http://store.steampowered.com/about/) software, and I can't seem to. The steam program is an .msi file, and unlike the programs .exe, when I click right there is no option to 'run as administrator '.

  According to the instructions I connected as the 'administrator' on my computer (it's one PC at home to the unique user ID is the ID of the admin), but every time I try to install it it stops with this message: "the system administrator has set policies to prevent this installation. I am running Vista.

  I tried Googling this issue, there seems to be a common problem for some, however, it doesn't seem to be a single solution (which does not require a degree in rocket science). I'm quite honestly only a basic computer user (I say this so you don't expect me to know how to get into the registry or anything exotic like that), so if you could help with instructions on how to fix this it would be much appreciated.

  By suggestion of Steam, I have updated my Microsoft Installer (4.5). This did not help.

  Thank you very much.

  Ah, I did it - did not work. The error message is actually a bit of a herring - turns out he can appear for a variety of reasons.

  Turns out that my gut wasn't about it being a registry problem... the MS Visual C++ 2005 Redistributable entries had broken somehow, preventing the installation of all instances of the same Windows install. Of course, most installers begin with MSVC Redist installation, that's why they were all fail. Fortunately, I didn't have to change the registry manually.

  I found a program on the Microsoft Download Center for help. Don't remember that actually was called but it is mainly to fix broken installations of MS Office (when they go to halfway, so there are entries in the registry, but the installation has not actually finished... so that windows will not let you install or uninstall). There just uninstall things correctly and released their registry keys. I zapped the entrance MSVC 2005 that has been there all my installers started working again!

  Fantastic.

  So yes, by sorry, that's probably all really confusing... was actually broken registry ultimately. Fixed by Googling for a few days. :)

• No sound on Vista as administrator system

  From what I've seen here, this problem has been going on for a few years now.

  I did everything under the Sun and have still no system sounds and sounds no online who use Adobe Flash Player. The only thing I have not seen someone mentions is the fact that if you go into another user account that is defined as a Standard user sounds function very well.  Under the administrative user the system sounds and the sounds online will not work.

  You can't test the system sounds in the sounds tab. You get no sounds. You can test your speakers in the Read tab and get the perfect sound.  You can also go to the Windows Media folder and test the system sounds from there and they work perfectly.

  I also ran the cmd and it also showed this:

  2011-08-11 19:48:17, 000001bf CSI Info [SR] verification complete
  2011-08-11 19:48:17, CSI Info 000001 c 0 [SR] repair of components 1
  2011-08-11 19:48:17, CSI Info 000001 c 1 [SR] beginning operation check and repair
  2011-08-11 19:48:17, CSI Info 000001 c 2 hashes of file members \SystemRoot\WinSxS\x86_microsoft-windows-p... rtmonitor-tcpmonini_31bf3856ad364e35_6.0.6001.18000_none_d278d2aaa749970e\tcpmon.ini is not actual file [l:20 {10}] "tcpmon.ini": "
  Found: {l:32 b:as3OOcx5px0XiJa7f7s9BVvlW/FFlKR4NMU/T + TOP/Kg =} expected: {l:32 b:ENtKeUct91LKlHclgfWTvnCdCOHHwDe + SYrPzZTTezU =}
  2011-08-11 19:48:17, CSI Info 000001 c 3 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2011-08-11 19:48:17, CSI Info 000001 c 4 hashes of file members \SystemRoot\WinSxS\x86_microsoft-windows-p... rtmonitor-tcpmonini_31bf3856ad364e35_6.0.6001.18000_none_d278d2aaa749970e\tcpmon.ini is not actual file [l:20 {10}] "tcpmon.ini": "
  Found: {l:32 b:as3OOcx5px0XiJa7f7s9BVvlW/FFlKR4NMU/T + TOP/Kg =} expected: {l:32 b:ENtKeUct91LKlHclgfWTvnCdCOHHwDe + SYrPzZTTezU =}
  2011-08-11 19:48:17, CSI Info 000001 c 5 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2011-08-11 19:48:17, CSI Info 000001 c 6 [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "
  2011-08-11 19:48:17, CSI 000001 c 7 hashes for Member file Info? \C:\Windows\System32\tcpmon.ini are not real file [l:20 {10}] "tcpmon.ini": "
  Found: {l:32 b:as3OOcx5px0XiJa7f7s9BVvlW/FFlKR4NMU/T + TOP/Kg =} expected: {l:32 b:ENtKeUct91LKlHclgfWTvnCdCOHHwDe + SYrPzZTTezU =}
  2011-08-11 19:48:17, CSI Info 000001 c 8 hashes of file members \SystemRoot\WinSxS\x86_microsoft-windows-p... rtmonitor-tcpmonini_31bf3856ad364e35_6.0.6001.18000_none_d278d2aaa749970e\tcpmon.ini is not actual file [l:20 {10}] "tcpmon.ini": "
  Found: {l:32 b:as3OOcx5px0XiJa7f7s9BVvlW/FFlKR4NMU/T + TOP/Kg =} expected: {l:32 b:ENtKeUct91LKlHclgfWTvnCdCOHHwDe + SYrPzZTTezU =}
  2011-08-11 19:48:17, CSI Info 000001 c 9 [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
  2011-08-11 19:48:17, 000001 ca CSI Info repair results created:

  I think by now someone at Micrsoft would have a solution to this problem.

  Here is how I have not solved my no system sounds or sounds online video:

  Beginning

  Type Regedit

  Right click on Regedit

  Run as administrator

  Edit

  Permissions

  Advanced button

  The Edit button

  Put a check mark in the box for full control

  Then OK or apply

  My sounds were back.

• Administrator & system updates

  I can't do updates to the window and who & where can I find my system administrator?

  Hi DonLee_61,

  If you can not get an update for your current Windows, what you can do, is to use the Windows Update troubleshooting tool. You can do this by visiting this link.

  For the system administrator, it's someone who can make changes on a computer that affects other users. Actually assign you as the system administrator by using the appropriate account type. To learn more, you can check this link.

  Let us know if it helps.

  If you find it useful, you can mark this as a response.

  Thank you
  Jairus Tol

• Administrator system with 50 + licensed individually machines... can I put?

  I'm a system administrator with more than 50 machines, all licenses of Windows 7 OEM running.  I use WSUS to update my machines, so that they do not get the update through Windows Update notice, and in fact, I don't want my users to have this ability.  I'm not sure if Windows 10 will work in our environment.  I would like to download at least one license to test.  If it works, I would get the rest of them upgraded.  Since they are all OEMS, I guess I would have to download for each PC... is that correct or could I just download one and use it for all PCs in my shop?  Thank you.

  Is the joined area not volume license Pro Windows clients receive the offer to upgrade?

  The domain joined computers are not supported at the moment unfortunately. Your best option is to download the. ISO file and upgrade the computers manually or off line.

  How computers joined to a domain that are not volume license customers will be able to control their systems and book the upgrade of Windows 10?

  You will need to use evaluation tools of the company for all of the computers you have. The reservation application does not work in the complex IT environments.

  Microsoft is likely to release a new version of its Microsoft Assessment and Planning Toolkit (MAP), which will support Windows 10. It can help you quickly COMPUTING environments small or large inventory without having to install any agent software in your environment.

  Watch this blog updates when it will be available with support for Windows 10.

  http://blogs.technet.com/b/MAPBLOG/

• I can't use my USB because of administration system or blocking USB problem.

  Because of my ignorance in the use of some security as USB security guard software and changes in my control panel, now I can't access my USB drive or any external memory device. When I put any external memory via USB device, it is noticed that my USB guard is locked and that the system cannot perform it.so contact your system administrator. But I uninstalled all my software security completely and checked my boot settings and the bios and the problem is still there. so I can't use my USB or external memory device via USB port in my laptop. I use the Windows 7 operating system. so please help me through your friendly consultation.

  Two thoughts. Take a look at this program and see if it finds the remains of security software http://www.revouninstaller.com/ and also to see what runs in your startup using this program.
  Autoruns from Sysinternals

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• Administrator system role assignment

  How do you give the Administrator role to a user of 11g R2

  R2 mainly has the new feature called ROLE ADMIN who has the list of roles OOTB and you can assign to any user.

  Click on organization-> research organization-> 'Top'-> open detail page go to the Admin role tab-> select role 'SYSTEM ADMINISTRATOR'-> click on the button "assign"-> the user to find now that you want to assign to the site-> click on the button 'Add'-> finally click ok.

  Make sure that check the option 'including suborganization'. If the user keep on IOM together.

  Why 'Top'-> because the Top is the parent of any organization. If you want the user to be administrator for particular org then you can choose that.

  However, normal role can be assigned using the catalog
  Search for and select user-> open-> tab "My Role" goto detail page-> click on "Demand accounts"-> now add the role of 'SYSTEM ADMINISTRATOR' catalog and finally to complete the request.

• I get an error that the system stops at the Insider by nt 1073741482 administration/system code

  It takes a long time for the computer to boot up then when I sighn he takes a lot of time for personal to load setting. After that they load I donot have a task bar to start down as I used too

  roper589,
  It seems that this error is due to a virus.  You should try to run a scan for viruses on your system.  You can try to start safe mode and run a scan with your antivirus.  If you do not have an antivirus program, then you can start using the safe mode with networking and try to run a free scan online here: http://onecare.live.com/site/en-us/default.htm

  Let us know if you are able to run a scan or not. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Norton made my Windows Sidebar gadgets stop working. How can I do without computer knowing talk? (enter the administration system, etc. is too scary for people like me, can I solve without an engineering degree)?

  Download Norton off my Windows Sidebar Gadgets

  Hello

  You may need to contact Norton Support to get the info on how to stop Norton to block your gadgets
  If this continues.

  Norton support
  http://www.Symantec.com/Norton/support/index.jsp

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------------------------------------------------

  Then proceed as follows:

  Logon as Admin - Start - type in the area of research-> COMMAND - find top - RIGHT CLIC on it-
  RUN AS ADMIN

  Replace C:\Program Files\Windows Sidebar by copying and pasting this command->

  CD C:\Program Files\Windows Sidebar
    
  Press enter (this is assuming that your sidebar is on C:, otherwise use the letter of the drive is on)

  Guest should be--> C:\Program Files\Windows Sidebar >

  Then copy / paste each of them following their tour each come into

  regsvr32-u sbdrop.dll

  regsvr32-u wlsrvc.dll

  regsvr32 atl.dll

  regsvr32 sbdrop.dll

  regsvr32 wlsrvc.dll

  Sidebar should now work

  Type in the search-> Sidebar box - find top - make a RIGHT CLIC top - RUN AS ADMIN

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How can I run the administrator System File Checker?

  I want to run Sytem Füle Checker. He said that I must "have administrator privileges and be on a console... I want to be able to run any command also. No instructions in the help are correct (what else is new)... In big, how to connect as an administrator. Do you need two separate accounts or a password or what? Thanks /.

  Right click on the program and choose "Run as Administrator" from the menu.

• by using a standard user account, when it is run as an administrator, system does not ask for password

  • I created a standard account for one of my children. He installed a program that refused him permission to run. I went to "run as administrator" and should be asked for a username and password to allow him to use the program. Instead he gave me the same error message access denied.
  • I then tried to implement other programs on his desk to run as administrator and they opened, but they ask me password. Why not invite me for a username and passoword?
    
    

  But the my administrator account has a password!

  Log in as administrator, and then set a new non-empty password. Now, repeat the test under your son's account.

• Workspace: Administration-> System Messages

  I am debugging some consolidation rules and need to display the system messages, but I get the following:
  
  Too many lines requested. Please review the filters to reduce the size.
  Error reference number: {87A0105D-8A45-43FC-9EF0-013A5AA79A0E}
  
  I can't filter, as I am looking at only 1 day, 1 app. I think I can see these messages is in the back-end tables, but I'm not sure of the table to bind to the HFM_ERRORLOG to see the part of the text of the messages. Any thoughts?
  
  Thank you!

  Hello
  Try this tool:
  Hyperion_HOME\FinancialManagement\Consultant Utilities\HFMErrorLogViewer.exe

  Best regards
  Marcin Kuzdra

• cannot switch Defender on apparently, I need a system of administration there is no administration system is a home pc

  I think that I was touched by viruses. Can't get avg to run and when I try to move the Defender or avg, I get a message telling me that I don't have the rites of the admin. It is a domestic machine with one account

  Hello

  Defender has a conflict with AVG

  read this:

  If you use microsoft security essentials, AVG , norton, mcafee, avira etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  to check the problems of malware:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• folder Windows NT has files listed in the table TextService and I can not delete or remove them due to trustedinstaller being above me, the administration system. How can I remove these?

  These files do not allow me the owner of this computer to support in the permissions area or allow me to delete them in windows safe mode. I also can't do anything with the permission of edition since the Trusted Installer is the only access to those files.

  The file is Windows NT with two subfolders and I can't access or remove one of them.
  I want to delete these files to windows and my computer, how do I remove the Installer only access?

  I was finally power with some help of a video get youtube the answer that I need to take in charge and delete the files with out having to down load any software.

  files are gone from my computer after using the edit view and change the file sharing, then enter the permissions and change permissions for folder with my user as owner.
  This non-greyed out the locked area to finally remove the files and allowing me to access the files.
  If you think that microsoft could have posted a simple is how its done.
  step by step.