NVIDIA nForce 430 GeForce6150

Similar Questions

• need driver NVIDIA GeForce 6150 SE and NVIDIA nForce 430

  I can update this driver because I can't go back or get help from Nvidia\ and it seems that there are 2 pilots of different type from the Manager of devices for widows update instalation I don't know why NVIDIA GeForce 6150 SE and NVIDIA nForce 430 is what in my device manager and my control panel , it shows an another nvidia drver tha a ge force 6100 nforce 430. someone please help me with what I think if I resove this then it will update this driver can then I can update BOF IE7 and IE 8

  Find you the driver you need?

  SP2 is usually delivered via Windows Update

  To find out if SP2 is already installed

  • Click the button start , right click on computer and then click Properties.

    If Service Pack 2 is listed in the Windows edition section, SP2 is already installed on your computer and you do not need to follow the instructions below.

  You can install it manually using the link here

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

• NVIDIA GeForce 6150SE nForce 430 code 19 error

  Hello

  I am running Windows Vista Home Premium 32-bit and have encountered a problem with the graphics drive. There is an exclamation mark next to the NVIDIA GeForce 6150SE nForce 430 in the graphics card and the error message is "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  It is up to date and there is no driver to restore. I uninstalled it and upon restarting, Windows successfully installed the driver, but the exclamation mark is still there. It has been suggested that I choose option 2 here to search for the drivers and Graphics Driver 280.26 has been found to install, but it made no difference. I don't know if it's important that I tried to uninstall it once before and selected the 'remove the software for the device option', but who do not select the second time.

  When I select 'check for solutions' in Device Manager there are two long files that describe the error. I downloaded here and here.

  The only problems is originally so far (or at least I suppose is caused by this because it happened at the same time) is that I can't select 1440 x 900 for a resolution of the screen so my screen is off, and I can put my computer in mode 'sleep'. Sleep is grayed out in the options. Any help is very appreciated. Thank you!

  

  So, after two weeks of multiple uninstalls, reinstall, install clean, destruction of registry, driver, using different drivers sweepers, spend time with the customer of NVIDIA and passing by each troubleshoot I could Google, I removed the HP Portrait display 1.4 update and now all is well. That had been installed AFTER that I started having the problem with NVIDIA so I guess it started as a small bug (the driver for my mouse also stopped working at the same time as the graphics card, but that was a simple fix) that the HP update is impossible to fix.

  Thanks for your help, Paul!

• NVIDIA Geforce 6150se nforce 430 GPU

  I have a HP Presario 64-bit machine running Windows 7. I ran the windows 10 install app and he told me that my graphics card does not work in Windows 10. I also read that if you use the Nvidia 309.08 driver it will work. What is the scoop?

  Hello

  Please contact Microsoft Community.

  For this, I suggest refer you to the suggestion given in mentioned thread and check if this can help:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-windows_install/how-can-i-make-NVIDIA-GeForce-6150SE-nForce-430/2ae41a08-9356-4924-aeb5-ce985994926b?page=1

  I hope this helps.

  Kind regards
  Anusha

• Looking for a NVIDIA nForce Serial ATA Controller Driver Update for Presario CQ5107C

  Hello

  The last two weeks, my computer, which is a Compaq Presario CQ5107C been freezing while I'm on it, and while I'm even not use without programs open. The pilot also missed a couple of times during use, but a message pops up saying something close to "driver recover successfully. Also, when I stopped it, it takes forever to stop and sometimes when I try to shut down properly, it goes to the blue screen and said that one of the drivers failed, which I guess it's my NVIDIA nForce Serial ATA Controller driver. My GetForce put up to date the most recent driver updated and there is no problem I know with whom. I read a litte autour my ATA driver can slow down and start doing this gel then go to blue screen if it malfunctions. I'm running on a 32 bit Windows Vista processor and have not yet update my Windows 7. I was looking for every possible way get an update for my ATA controller driver anywhere without having to pay for it. I guess I should upgrade to Windows 7 to possibly get an update. Update to Windows 7 would remove all the programs/personal off my computer files and if I had to stop the gel? Any help would be great because I searched everywhere and found the best solution yet. Thank you.

  Here are the specifications of your Compaq Presario CQ5107C desktop computer. According to the specifications, it uses a GeForce 6150SE / nForce 430 chipset. The chipset driver is below.

  Windows Vista/Win7 32-bit driver v15.49

  Supoorts; 430 / GeForce 6150SE, 430 / GeForce 6150LE, 430 / GeForce 6150, 430 / Geforce 6100, 420 / Geforce 6100, 410 / GeForce 6150LE, 410 / GeForce 6100, 405 / Geforce 6100, 400 / Geforce 6100

  Driver Ethernet (v73.14 +) WHQL

  (V73.16) network management tools "Sedona".

  SATAIDE (v11.1.0.33) WHQL driver

  SATARAID Driver (v11.1.0.33) WHQL

  Application RAIDTOOL (v11.1.0.30)

  SMBUS (v4.74) WHQL driver

  SMU (v1.71) WHQL driver

  GPU (v190.38) WHQL driver

  PhysX (v9.09.0428)

  Away Mode Driver (v6.0.6000.114) WHQL

  Installer (v7.57)

• Win7 and nVidia 6150SE 430 motherboard

  Are they really compatible? When I run video games like Civ 3 or 4 the processor starts to run high and the fan runs at full speed as the machine is about to take off ;-). The games can be run in full screen mode and even with a window frame and the animation set as low as possible, the set of parameters 'Global' or low nVidia, I still I have this problem.

  I downloaded updates (280) recommended driver from nVidia for compatibility and problems with the windows leaving 'trail' when they were displaced the other. This seems to be a question of resources.

  Can I solve this problem with a separate graphics card? And if yes how heavy duty a card can the system handle?

  Yes, Windows 7 and Nvidia 6150SE/430 chipset are compatible. Probably you are in need of a discrete graphics card to offload processing card video system. If your system has slot PCIe x 16, almost any PCIe x 16 graphics card should work your power suplly provided is large enough to power the new card.

  You don't mention what HP/Compaq computer, you have, so we can only speculate about the extension and power connectors that has your computer. Please provide your number of HP/Compaq exact model or product number for more specific help with your question.

  Frank

• HP Pavilion a6142n, 32-bit PC: need to update for Nvidia nForce 10/100 Ethernet Driver Version 67.8.9.0.

  I upgraded Windows Vista 32 bit Windows 7 32 bit and the report Upgrade Advisor says I have the Nvidia nForce 10/100 Mbps Ethernet.  The recomomended action is before installing Windows 7, go to the manufacturer's Web site to download the latest dirver for this device.  After I installed Windows 7, install the registered driver.

  I had no luck locating it on the Nvidia site, so any help in the search, it would be greatly appreciated.

  Thank you

  Hello:

  You need this driver...

  http://www.nvidia.com/download/driverResults.aspx/14874/en-us

• NVIDIA nForce network controller does not work after a clean install of Windows 7 "Code 10"

  HP 6736nr

  AMD processor, nVIDIA nFORCE Network Cotnroller (I wish there were more about HW than that)

  Windows7 32 bit host

  Wireless works fine.

  For network LAN controller, Device Manager displays "Device cannot start Code 10".  not useful as nVIDIA site

  I need to find new drivers.  Following hardware ID:

  PCI\VEN_10DE & DEV_054C & SUBSYS_30CF103C & REV_A2

  PCI\VEN_10DE & DEV_054C & SUBSYS_30CF103C

  PCI\VEN_10DE & DEV_054C & CC_020000

  PCI\VEN_10DE & DEV_054C & CC_0200

  I tried to disable / enable, and uninstall and nothing works.

  Thanks in advance.

  Hello:

  Normally, the chipset nForce Vista driver install the network card.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-55781-1&CC=US&DLC=en&LC=en&os=2100&Product=3646946&sw_lang=

• HP PAVILION ELITE M9517C DESKT: NVIDIA NFORCE 10/100 Mbps Ethernet drivers upgrade

  I do a clean install for upgrade with Win 7 Pro 64-bit OEM. I ran the Win 7 Upgrade Advisor and need guidance on these issues, on what I need to do to upgrade:

  NVIDIA NFORCE 10/100 Mbps ethernet
  NVIDIA GeForce GT630
  NVIDIA High Definition Audio
  NVIDIA nForce System Management Controller

  Are these extensible & will work with Win 7 Pro 64-bit?

  Hello:

  You will need this chipset driver in order to install the ethernet (NVIDIA NFORCE 10/100 Mbps ethernet) and most of the other devices you listed.

  You should install this driver first and restart the computer before you install any other driver.

  http://www.nvidia.com/download/driverResults.aspx/30520/en-us

  According to the specifications of your model, it came with integrated graphics which means that you have added the video card.

  So you will not find this graphics driver on your PC support page.

  This is the latest driver for your GT630:

  http://www.nvidia.com/download/driverResults.aspx/81877/en-us

• HP Pavilion a6540in: I can't find an update for NVIDIA nForce 10/100 Ethernet Driver Version

  • I'm upgrading from Windows Vista to Windows 7 and Upgrade Advisor says that NVIDIA nForce 10/100 Ethernet requires the latest version of the driver. The current driver is 67.8.9.0
  • I can't find the detected on the NVIDIA site! It is the only action mentions Advisor.

  Hello:

  This is the 32-bit driver...

  http://www.nvidia.com/download/driverResults.aspx/30521/en-us

• NVIDIA nForce Networking Controller issues

  I have a hand built system running Windows XP sp3. It does not recognize one of the pilots who strives to update and suggested I have uninstall and then try to re - install. In doing so, he made sure I can't access the internet. After having diagnosed the problem, I found that it was disabled and uninstalled my NVIDIA nForce network controller. When I tried to re - install, it says that I need an installation disc. I don't have a disc, so I contacted NVIDIA. They informed me that they offer no support for this controller when part of a card mother and suggested that I contact Microsoft. Can someone help me find an installation disc, or suggest that I could do to make this work?

  Hello

  You can probably download the drivers from the support page for your computer.

  Or maybe it will work for you, http://download.cnet.com/NVIDIA-nForce-Networking-Controller/3000-2112_4-143144.html

  If during the installation, it offers to install the nVidia firewall. JUMP.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Unable to connect to the internet, NVIDIA nForce Networking Controller issues

  The NIC 'NVIDIA nForce Networking Controller' experiences driver or hardware problems... the message that I get when trying to connect to the internet.

  In under 'Network adapters' Device Manager double-click your network adapter, in the, click the tab drivers, click on the button 'Disable', properties when disabled, click 'enable '.

  You can also try the "Uninstall" button to uninstall. Then on the Action menu click on "Scan for hardware cahnges ' of the reinstall.

• The "NVIDIA nForce 10/100 Mbps Ethernet" network card is not properly configured to use the IP Protocol on my HP vista.

  Initially my HP a6683w said that nvidia network controller experienced pilot or hardwear related issues, then NVIDIA had me download something and then restart my computer to see if the internet was starting to work again. Now, I restarted the computer and is trying to say that the adapter NVIDIA nforce 10/100 Mbps Ethernet have driver or hardware related issues. I want to just my internet to work again. How can I fix it?

  Hello

  1. have you made no hardware/software changes before the show?

  2. using an internet connection wired or wireless?

  3. are you a specific error message while trying to go online?

  Follow the steps mentioned below

  Method 1: Restart the computer using safe mode with active network.

  a. restart your computer.

  b. When you see the logo of the manufacturer of the computer, press F8.

  c. the display Advanced Startup Options , use the arrow keys to select Safe Mode with networkand press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  Now check if you are able to connect to the network, if the problem persists, follow the next method

  Method 2:

  Follow the steps mentioned in the link and check with the question.

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  Method 3:

  Download and install the drivers from http://www.nvidia.com/Download/index.aspx?lang=en-us link with the question checking.

  It will be useful.

• NVIDIA nForce Networking Controller problem.

  In my "Device Manager" and on the tab "Network adapters", my NVIDIA nForce Networking Controller has a /! ------beside him.

  Here is what it says under "device status". "This device cannot start. (Code 10)

  I tried the 'check for solutions', but came up with nothing.

  In addition, it said that the most recent driver is installed.

  I don't know when it happened, but it's making my EQII. =(

  ____________________________________________________________________________________________________

  Computer: HP Pavilion DV9700

  OS: Windows Vista Home Premium / SP2

  System type: x 64

  Hello:

  The only suggestion I can offer is to reinstall the nForce chipset driver that also installs the cable network controller driver.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-55781-1&CC=US&DLC=en&LC=en&os=2100&Product=3650968&sw_lang=

• NVIDIA nForce network controller driver

  Have a Pavilion a1700n with Vista Home 32-bit (SP2) Preimium.  You will need to re - install the drivers for the NVIDIA nForce Network Controller, but need to re - install the driver.  May not know exactly what model of controller I have, so don't know what driver to pull out of the NVIDIA site.

  Features HP are very generic to describe the network controller, and the driver for the controller does not appear on the list of available drivers on the HP site for this computer.

  The driver for the network part of the NVIDIA chipset drivers, if you can't get by using the Recovery Manager, you can download drivers download for your O.S. and chipset NVIDIA nForce