ADMN-> activities-> export cut the extended text Attritue

Similar Questions

• Cutting the image text

  Hello

  I'm cutting a word after having extended the type to create forms.

  

  When I click on the button "-" before (second to the left, the top line)

  He reduced only to the H:

  

  Why is there that and not cut the word off the gray below?

  Thanks for your help!

  Opacity mask inverted Jacob will work, or if you want a clipping mask, here's a way...

  1. draw a rectangle the size of your raster image. Place it in front of the image, by aligning the two.

  2. position your text describes where you want it cuts the image, then select it, as well as the rectangle and choose object > compound path > make.

  3 select the transparent/rectangle path of text with image and choose object > clipping mask > make.

• Y at - it a function or an addon that allows you to export all the highlighted text in a document to another document (to create summaries)?

  It would be very useful to be able to export all the text highlighted in a document at the same time

  There is a function built into Acrobat to create a succinct comment (comments - comments list - Options - create summary observations).

• How to cut the big text in several small files of text file?

  Hi all

  I got a big text file.  Notepad could not open it.  I want to cut it into several small files-texts so that I can open and check it out.  I use "set the file position" and 'set the size of the file', but it still gives me the part of the start file.  I would like to, say, four small files, in the first quarter, the sencond quarter, in the third quarter and in the fourth quarter to each file.

  How? Seems very simple question. I miss...

  Many thanks for any help.

  Anne

  Hi Anne,.

  Just read the blocks of the file in a loop...

  

• Problems with the HTML text and cutting!

  Hey everybody,

  This is my first post a lot! I have a very simple question but frustrating, I cut text in illustrator (object > slice > make), then to make this text in HTML (slice Options) text. Then I export my picture with other pictures behind this text using the 'Save for Web and devices' option to find that the "HTML" text has moved all art behind it!

  I have attached a picture of a very basic example of what is going on, as you can see all around this text has been moved, the text does not stay on top of the work behind it?

  

  I would appreciate any help on this problem, probably very easy to solve!

  Thank you very much!

  There is nothing "to"stay on top"- a slice is a slice and they are prepared automatically side by side. You can only assign a background color. I strongly suggest do you a little reading on HTML / CSS first. No offense, but you are using the wrong tool if you think that I could remotely anything like usable HTML code...

  Mylenium

• Cut and paste the text of the anchored text box?

  CS4, Mac G5, Leopard.

  I've recently been investigating scripts in InDesign and I have a problem to solve that exceeds my, base, understand.

  I used Rorohiko "Lightning Brain text exporter" to extract text (rtf) of a book.

  The text contains countless anchor text blocks. I would like to be able to select all the text in the block of text anchored, cut and paste it into the document where the anchor element is referenced, and then remove the anchor text (now empty) block.

  Any help would be accepted with gratitude

  Thanks Steve

  A full javascript (from the previous post on the forum):

  myDocument var = app.activeDocument;

  Inlines (myDocument);

  function inlines (doc) {}
  var doc.stories = St;
  for (var i = doc.stories.length - 1; I > - 1; i--) {}
  While (st [i].textFrames.length > 0) {}
  var ix = st [i] .textFrames [-1].parent.index;
  St [i] .textFrames [-1] .texts [0] .move (LocationOptions.after, st [i] .insertionPoints [ix]);
  St [i] .textFrames [-1] .locked = false;
  St [i] .textFrames [-1]. Remove();
  }
  }
  }

• 6500 a Plus - cut the text right

  6500 a more - cut the text on the right side of the PDF files when you print from MacBook - PC fine prints.

  I worked with Apple to validate all parameters of MacBook.  Mac OS X 10.9.2

  Help!   I'm retiring from my PC. :-)

  Welcome to the BGoFly forums,

  I saw your post on the problems you are having with your Mac PDF files printing. The issue is your computer the printer prints fine from your PC. Before you print the PDF file, check the preview before printing to ensure that you can see the entire document.

  I have a few others not to try:

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart the Mac and re-add the printer and test again a PDF file
  • Fill all your updates.
  • Try to use another program to print your PDF. This will let us know if the problem occurs in only one program.
  • If the problem persists, try changing the connection type. If you are connected wireless, try to plug in a USB key and test a PDF file.

  I hope my suggestions help!

  Have a great Tuesday

• BlackBerry Q10 frustrating to select, cut, copy and paste the missing text and trackball

  Dear Blackberry, I immediately need an app to activate the touchpad virtual across all publishers note, email and sms where I am able to easily select, copy, cut, paste any text.

  It is very urgent but also important, for me to continue usign Q10.

  All users, you are also facing this problem, we will find a developer, who can develop it. If blackberry decides to take a lot of time to do this. That's my idea.

  It has significantly reduced my productivity.

  Hello such RR_on_Q10

  If you want to select copy cut paste a text, it's easy, just drop your finger on the text to be copied, and you will be able to copy, select, paste, share.

  I use Mac OS 10.2 and is very easy with just leave your finger a few seconds, you'll have the options you want.

  Kind regards...

  • Answer you like me? You want to THANK? Click
  • If it was the SOLUTION click on "accept as Solution!
  • #4LL   #ichooseBlackBerry10 @Gutijose14

• Cut the text from the image using the Pathfinder tool

  Hi all

  I'm cutting text from an image in Illustrator. I use the version on a Dell XPS 12 CS6.

  I have scoured the internet for instructions and have tried everything, but when I followed the same steps in Illustrator I don't get my desired result. I created the contours for the text, so that the image and text are on the same layer, grouped (and dissociated) and then I tried all the options in the pathfinder, nothing helps. I've done it before with an image, but for some reason can not get it to work this time.

  I even tried to make the image in a clipping mask, so it would be a 'form' instead of 'image', but that didn't do anything either.

  If anyone has any advice, I would greatly appreciate it that I spent hours trying to figure this out!

  Thank you!

  Erin

  Pathfinder will not work with a path and a picture.

  Instead, put your text above the image (it can be the living text), select both.

  You can then use the button do mask in the transparency to cut your text on the image palette.

  

• Cut the text column's timestamp hh

  Hi all

  I'm cutting the text column's timestamp hh: 2014-02-18 08:39:56

  I tried the format of data as hh: mm, but it does not work as she filed is defined as text and also Cast (Cast (as float) as timestamp) / cast (as a timestamp) did not work.

  many will appreciate any advice on how to solve this problem!

  Hello

  It is a new feature available in 11g...

  Column properties Goto--> column properties--> format of data--> custom--> hh: mm

  This will display the format hh: mm in the timestamp format.

  Thank you

  prassu

• Make a PDF accessible but it's cutting of a text on the corners of the pages

  I have a non-indexed PDF that I have made available using text "recognize", but due to the recovery of the process when OCRing documents he cut the text of the pages in the corner of the documents.  How can I disable this auto deskew to perform the text recognition process?

  Hi minimom2424,

  Could if it you please let me know which version of Acrobat you are using.
  Please see the city KB doc link below to find out how to disable deskew option in Acrobat:

  Straighten and realignment of the PDF Pages in Acrobat XI

  Let me know if this helps.

  Kind regards

  Ana Maria

• I have the text on a shape described triangle, and I want to just cut the race around the text of the shape?

  I have the text on a shape described triangle, and I want to just cut the race around the text of the shape?

  Please see the establishment.

• Not available in Premier Pro after the export project AE direct text templates

  Hi team

  I tried to create a few lower third models in AE to use in first pro more later. To speed up the process, I downloaded a few models of a site, but unfortunately after a few minor changes to the export of the AE file does not seem to support models of living text of Premier Pro so I need to create lower thirds in AE and export them individually which I hope to avoid.

  Any ideas why this happens? I use both products CC version.

  Thanks in advance for the help

  Do not forget that you are using the same version of CC for the first and AE (2014,2015...)

  and that each After Effects compositions that you want to import have the option enable the model in settings of composition in advance.

  It will be useful.

  

• I have problem in the PDF export to save only the layers appeared only. When I export the indesign file to PDF that contains layers hidden pdf placed, pop up problem when I use the search field in exported pdf file. hidden text of hits from search results

  I have problem in the PDF export to save only the layers appeared only. When I export the indesign file to PDF that contains layers hidden pdf placed, pop up problem when I use the search field in exported pdf file. hidden text of hits from search results to laye

  I answered your question: there is nothing you can do in InDesign. You need to ask in the Acrobat forum I linked.

• How to cut the text of a group of Clip?

  Hello

  I am very new to Illustrator, I appreciate any help you could give me.  I use Illustrator CC.  I created a form composed and then used as a mask to cut out an image for the form so that the vector image is the context in which the form I created.  Now I have the text on parts of the form, and I would like to cut the text of the compound shape.  That is a hole through the object in the form of the text.  Also, I should probably note that the object I want to cut the text on is considered as a' Clip' in the layers panel.

  I tried a number of different options that I found on the forums, etc, but none seems not to work.  So far I have tried:

  1. conversion of the type of a sketch, then selecting the Clip group and type and then by a compound path.  The result: a startup error "cannot make a compound path.  A compound path is unable to combine with a regular path clipping mask. »

  2 Select the type and the Group of Clip and then using much less prominent in the Pathfinder Panel.  Result: An error message stating "the filter yielded no results.  Please select two paths that intersect. »

  3 select the type and the value at 0% transparency in the transparency Panel then selected the type and group of Clip and then tried the difference and Exclusion.  Result: Nothing, but transparent type.

  I enclose a photo of the object and the text I want to cut him and also the layers panel.

  I'd appreciate any help I can get.

  Thank you

  Michelle

  

  Michelle,

  What happens if you go back to the objects in the first picture with the direct Type and:

  (1) select all instances of three Type and group them.

  (2) select the Group Type and group in the flyout palette (Panel) transparency and Clip click the opacity mask making with Clip and mask Invert unchecked (if this sounds wrong to change these options, it should work with those when you have black Type)?