Is it possible to hear a Bluetooth speaker and the internal speakers at the same time on the iMac with OSX 10.11.2?

Similar Questions

• The Bluetooth device in the iMac screen must be certified for IFM establishes a connection with the iPhone?

  I'm trying to establish a connection between my iPhone and my iMac. The Bluetooth device in the iMac screen must be certified for IFM establishes a connection with the iPhone?

  This connectivity is not supported (except to attach them). What you trying to do?

  Barry

• I can not find bluetooth icon and the device on my laptop

  I can't find bluetooth icon and the device on my laptop - HP550 - Windows XP, so not able to connect all devices.
  Even I checked the Bluetooth Services on my PC by method "services.msc", but I can't find bluetooth written on the list.

  Please help me because I want to transfer files via bluetooth.

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. have there been recent changes to the computer before the show?

  2. you get any error message?

  Please go ahead and consult the methods mentioned below and later a update on the State of the question.

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Troubleshooting Wireless and Bluetooth problems.  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/keyboard/wireless-Bluetooth

  Method 3: How to troubleshoot Bluetooth detection and connectivity problems in Windows XP Service Pack 2: http://support.microsoft.com/kb/883258

  For your reference: How to install and configure Bluetooth devices in Windows XP Service Pack 2: http://support.microsoft.com/kb/883259

  Follow these recommended steps and after if you still experience the problem.

• HP 8500 has more scan not scan - I hear a fast spin and the book will not draw in the charger

  HP 8500 has more scan not scan - I hear a fast spin and the book will not draw in the charger. I tried a reboot, including disconnect the motor from the power analysis. A software update was just pushed through today as well, but the problem with the scanner was before this update. This update took place after the power has been turned off, then on again.

  The problem occurred this morning during a prior scan + back. I heard a click or pop/fast spin, something that indicates something was wrong, when he tried to feed on the 1st backsheet through for the scan of the back. Now, it won't take what anyone, even to make a copy using the feeder.

  When I look at the roll holder bar above paper, I noticed that it does not drop down to make contact with the paper he move to the scanner itself. I remember having this problem once before - there are 2 years, while the warranty was still in effect and does not remember how it was resolved.

  Any suggestions would be welcome. I don't want to buy another printer just to get the scanner to feed again. The printer itself is fine and scan from the bed is not affected.

  For anyone interested, I sloved the problem of roller scanner do not push the paper into the ADF.

  I turned off the printer last night. Today, I removed the power cable at the back of the printer and then unplugged the power cord from the wall. It was off for about 30 minutes. I reconnect the cable to the printer and the wall, the printer running and waited about 10 minutes. So tired the charger scanner again. It worked and I don't know why.

  Yesterday, I tried a version of what I found in the documentation for HP support. He said to do, but not to turn the printer off first. He has not worked for me.

  I don't know if my path has really had no effect on the results, but it works now and I don't have to think about buying a new printer for awhile yet. I like this idea!

• I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  Download and install the trial version of Lightdroom CC.

  Then enter your serial number, follow these steps

  How to convert a trial CC 6 Lightroom Lightroom

• Hi I would like th different creative cloud buy 2, only photoshop/lightroom one and the other with all pack.is it is possible because I saw that we can only install on 2 different computers at the same time

  Hi I would like th different creative cloud buy 2, only photoshop/lightroom one and the other with all pack.is it is possible because I saw that we can only install on 2 different computers at the same time

  Creative desktop cloud applications can be downloaded and installed on multiple computers, regardless of the operating system. However, the activation is limited to two machines per individual related to the composition, and you may not use the software on these devices simultaneously.

  You can also see:

  FAQ: Can I install Creative Cloud on several computers?

  You can either sign of Creative cloud on a computer to connect to another, or as you said, buy a membership second using an AdobeID different so that you can leave, signed at on 4 computers.

• Can we listen to the audio via Bluetooth speaker and Speaker Pro iPad at the same time?

  IVe tried to find answer to this. Hope someone can help. I would like to get more power audio audio stream in my Bluetooth speakers without losing my Pro iPad speaker.

  It's a sound source or the other, not both.

  If your Bluetooth speaker is not powerful enough, buy a more powerful.

  Good luck!

• How to get the name of the bluetooth device and the name of the bluetooth device address device class?

  Hi all

  Can I know how to get the bluetooth device name and the name of the bluetooth device address device class?

  Example:-if my bluetooth device address is :-98:EB:CD:01:1F::90 then how do I get my bluetooth device name?

  I hope you understand my problem. Let me know as soon as possible.

  :

  Thanks for the reply.

• You can control volume with bluetooth headset and the new Apple tv?

  Hello community!

  I have a new Apple TV and I'm watching tv and movies series, but the only way I can do it is night. I don't want to disturb my family, so I was wondering if I can watch it with a bluetooth headset and control the volume. What I mean is if I can have a very low volume on the TV but more volume on my headphones. I can do with my PS4, but I have most of my movies in iTunes.

  Thanks for any help you can provide.

  You cannot output audio to the tv and the headphones at the same time if that's what you're asking. However, you will be able to control the volume of the headphones using the distance of Siri.

• Profiles BlueTooth scale and the GATT

  Hello

  I use an example of GATT BlueTooth to activate connection with scale of Wahoo. The scale is the utility (after it is combined and registered in the BlueTooth settings UI). It lists several standard services and the other (0 x 1901) is not in any of the documents of the GATT on the site of BlueTooth.

  In addition, under this service, there are three characteristics listed, one of which is 0x2A1C, TEMPERATURE_MEASUREMENT...

  Now, since there is no profile of the GATT for WEIGHT, Wahoo using temperature profile of the GATT to pass the measure of weight through?

  I've heard of Wahoo. It turns out that the service of weight exist, but it is not official. Example of application of the GATT sniffed out correctly, but not could not name it

  (Not official)

• possible to have a display value and the return of LOV

  Hello
  
  With the help of obiee 11g, I have a variable prompt that takes column as value.
  I have the report that I use a diff column eual to this prompt value.
  I wanted to know if its possible at all to have a view and a return value
  i.e. in the lov, we show a value and when we choose we choose a different value that goes to the filter
  
  For example. If we have an APAC region in the table, and then in the show LOV in Asia-Pacific and it returns APAC, so that
  in the data filter gets filtered using ICCA.
  
  Thank you

  You can try something like this sql in the Prompt Variable:
  SELECT CASE WHEN Office.Region = "ACPA" THEN 'Asia-Pacific' WHERE Office.Region = END 'EMEA' THEN 'EUROPE' TO THE "subject domain name.

  And then in the report so you need to change the column fx filter
  CASE WHEN Office.Region = "ACPA" THEN 'Asia-Pacific' WHERE Office.Region = END 'EMEA' THEN 'EUROPE '.

  Note: This is very good for the case where you have less no.. of LOVs in the column.

  Hope it will be useful...

• Is CP5.5 - possible to create a summary screen of the quiz with all issues on one screen?

  Hello Forum members

  I was wondering if it is possible, rather than having a quiz to review where you look at a screen at once quiz questions, it is possible to create a quiz summary screen, which will provide a summary that the questions were answered incorrectly/correctly (without actually giving the user the correct answers)?

  Below is an example of what I want to achieve:

  

  Is this possible in CP5.5? Perhaps with stocks advanced/variables?

  Thank you very much

  Loraine

  For more information, Lilybiri has now provided a more detailed explanation of how to realize the idea of vishhere above, which can be found at:

  http://forums.Adobe.com/message/3995154#3995154

  Thank you very much

  Loraine

• I constantly hear a maintenance program and the music, talk, news, music etc through my speakers, it overlaps another medium, he plays all the time even when I'm offline?

  ?????????

  Hello
   
  This happens usually if some programs running in the background. Make sure that there are no programs running. This also occurs if the mixer settings are changed. To check the settings on the mixer, try the following steps.
  1. click on the volume in the taskbar icon.
  2. click Mixer, switch to the cursor at the lowest for all applications.
   
  To restore the sound on the computer settings automatically, download and run the Microsoft fix it and check the result.
  Visit the link, click "Run now" and follow the instructions in the wizard: http://support.microsoft.com/gp/no_sound
  If the problem persists, try the steps mentioned in this article to find out which is the origin of the problem: http://support.microsoft.com/default.aspx/kb/929135

  NOTE: Follow step 7 to start the computer as usual.
   
  Post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it possible to get GPS raw data and the sensor data in a single program.

  GPS and sensor.h are the bps_event_get_domain (event).

  {If (bps_event_get_domain (event) == sensor_get_domain() & bps_event_get_domain (event) == geolocation_get_domain() {)}

  The collection of data from the sensors and GPS data in the same program without conflict?

  Thank you for your attention.

  You must structure your code like:

  If (bps_event_get_domain (event) is {sensor_get_domain()})

  / * handle sensor event * /.

  } ElseIf (bps_event_get_domain (event) == geolocation_get_domain() {)}

  / * handle geolocation event * /.

  }

• Bluetooth and audio of the speaker at the same time

  I run vacation watch I want to be able to provide an audio feature on both an FM transmitter connected to the headphone jack AND Bluetooth speaker at the same time. This way people walking as well as those in their car would be able to hear the music. As it is, I have a system that works, but not both at the same time. With the level of technology that is in the computers in the House these days, that shouldn't be too difficult to configure the software to allow the two outputs. Is it possible to make this work?

  Hello Gerald,

  Please contact Microsoft Community.

  From the description of the question, we understand that you want to provide audio on the two FM transmitter plugged into the headphone jack and speaker Bluetooth at the same time. But unfortunately, we wish to inform you that it is not possible to obtain a taken audio headphone and speaker Bluetooth at the same time. As you mentioned in your post, you would be able to get the audio out through headphone or Bluetooth speaker both. You can check the Web to see if there is any third-party program that can support technology of dual audio output.

  Important: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  The above information was hoping to get useful, please return it to us if you need additional assistance.