Adobe Presenter 8 silent install

Hello!

Running Windows 7 x 64 and need to find a way to do for installation in silent mode via SCCM for mass deployment.

Unable to find any documentation on this subject...

/ Henrik

Hinken, you can silently install presenter 8 like many other adobe products. Simply create an msi package for presenter using JOHN 3.1 8 and then push it through SCCM and install in silent mode.

You can get the last 3.1 AAMEE since the link with CS6 Enterprise Deployment Guide(works with Presenter 8 as well) below.

http://www.Adobe.com/devnet/creativesuite/enterprisedeployment.html

[Transferred the deployment Forum discussion]

Tags: Adobe

Similar Questions

  • Cannot install the version upgrade of Adobe Presenter 9.

    When I tried to install the upgrade, he stopped and said that I needed to restart.

    I did this... .and then when I tried to reinstall it asks me to remove the trial version of Adobe Presenter 9! I never installed a trial version.

    So, I had a conversation and downloaded the Adobe cleaning tool.

    Has passed through the stages. There is no presence of an Adobe Presenter 9 installation. Of course Adobe Presenter 8 is installed... .and it takes to be upgraded.

    I hope someone here can give me one solution, else I call Adobe Tuesday after his return from Mumbai

    Hello

    Can not coexist two versions of Adobe Presenter.

    Please uninstall the previous version of Adobe Presenter 8.

    Then install Adobe Presenter 9, it should work.

    Let us know if it works.

    Kind regards

    Mukul

    Adobe Presenter Engg. Team.

  • I have to install just Adobe presenter of this entire application. I created the package using AAMEE3.1

    I created the package using JOHN 3.1, using the source of Adobe eLearning Suite 6.1.

    During the creation of a Package I selected only Adobe Presenter 8. The package is serialized and also Adobe ID is here to connect. The package is created successfully. But when I run MSI it restorations during the Installation.

    Here is the PDApp.log file:

    15/07/2013 09:07:21 [INFO] DeploymentManager - Build Version - 3.1.105.0

    15/07/2013 09:07:21 [INFO] DeploymentManager - verbosity Logging Level Set of 4

    15/07/2013 09:07:21 [INFO] DeploymentManager - runs the deferred custom action.

    15/07/2013 09:07:21 [INFO] DeploymentManager - obtained the following as CustomActionData

    15/07/2013 09:07:21 [INFO] DeploymentManager - mode = install; sourceDir = c:\Nouveau (2) folder \Adobe presenter 8\Build\. installDir =; origDB = folder (2) c:\Nouveau \Adobe 8\Build\Adobe presenter presenter 8. MSI

    15/07/2013 09:07:21 [INFO] DeploymentManager - mode = install; sourceDir = c:\Nouveau (2) folder \Adobe presenter 8\Build\. installDir =; origDB = folder (2) c:\Nouveau \Adobe 8\Build\Adobe presenter presenter 8. MSI

    15/07/2013 09:07:21 [INFO] DeploymentManager - original database path: C:\New folder (2) \Adobe 8\Build\Adobe host presenter 8. MSI

    {15/07/2013 09:07:21 [INFO] DeploymentManager - OptionXML saved to the location: D:\Users\Vmbuild\AppData\Local\Temp\{0EAD2103-39AF-4D85-B942-CAC0E462C482}\\{9CB14C72-1E7 1-49 C 0 - A7D8 - 559F1DC35661}

    15/07/2013 09:07:21 [INFO] DeploymentManager - Build Version - 3.1.105.0

    15/07/2013 09:07:21 [INFO] DeploymentManager - verbosity Logging Level Set of 4

    15/07/2013 09:07:21 [INFO] DeploymentManager - initialization of the Custom Action parameters data

    15/07/2013 09:07:21 [INFO] utility - file does not exist

    15/07/2013 09:07:21 [INFO] DeploymentManager - commissioning tool path is (D:\Users\Vmbuild\AppData\Local\Temp\{0EAD2103-39AF-4D85-B942-CAC0E462C482}\\{731F139B-D8 D6-4870-AA90-9626C4D6D4E2}).

    15/07/2013 09:07:21 [INFO] DeploymentManager - begins to run the custom action to install mode

    15/07/2013 09:07:21 [INFO] DeploymentManager - STEP 1: start to parse the XML Option.

    {15/07/2013 09:07:21 [INFO] DeploymentManager - deployment XML created to the path: D:\Users\Vmbuild\AppData\Local\Temp\{2592DDC9-72BD-430A-B2EA-C2839B69B46E}\\{709B4BF9-4A0 5-4D3E-BC48-850DE16D5A85}

    15/07/2013 09:07:21 [INFO] DeploymentManager - Deployment Manager runs in Install Mode.

    15/07/2013 09:07:21 [INFO] DeploymentManager - relative path to Self-Update the bootstrapper does not exist.

    {15/07/2013 09:07:21 [INFO] DeploymentManager - substitute XML created to the path: D:\Users\Vmbuild\AppData\Local\Temp\{2592DDC9-72BD-430A-B2EA-C2839B69B46E}\\{61E5FBB2-8F4 C-4909-9A3F-823EC1DE99F5}

    15/07/2013 09:07:21 [INFO] DeploymentManager - no updates found (0).

    15/07/2013 09:07:21 [INFO] DeploymentManager - STEP 2: from launch media program boot.

    15/07/2013 09:07:21 [INFO] DeploymentManager - bootstrapper launch location is: C:\New folder (2) \Adobe presenter 8\Build\Setup\Set-up.dat

    15/07/2013 09:07:22 [INFO] installation - build Version - 6.2.136.0

    15/07/2013 09:07:22 [INFO] installation - verbosity Logging Level Set of 4

    15/07/2013 09:07:22 [INFO] installation - start the installation of Adobe

    15/07/2013 09:07:22 [INFO] installation - TimeLog: start-up of the bootstrapper

    15/07/2013 09:07:22 [INFO] installation - TimeLog: begin the initial checks

    15/07/2013 09:07:22 [INFO] installation - specified Action - "install".

    15/07/2013 09:07:22 [ERROR] installation - error analysis of the arguments of the command line to the - 'DISABLE_CCM_DESKTOPSHORTCUT '.

    The expected arguments are-

    -mode = silent

    -overrideFile = '< FilePath > ".

    15/07/2013 09:07:22 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\resources\setup.xml

    15/07/2013 09:07:22 [INFO] PIM - XML is valid

    15/07/2013 09:07:22 [WARN] PIM - could not find node

    15/07/2013 09:07:22 [INFO] installation - found 7 packages in install manifest

    15/07/2013 09:07:23 [INFO] utility - semaphore is not locked

    15/07/2013 09:07:23 [INFO] PIM - Build Version - 6.2.136.0

    15/07/2013 09:07:23 [INFO] PIM - verbosity Logging Level Set of 4

    15/07/2013 09:07:23 [INFO] utility - the file does not exist

    15/07/2013 09:07:23 [INFO] utility - the file does not exist

    15/07/2013 09:07:23 [INFO] PIM - Build Version - 6.2.136.0

    15/07/2013 09:07:23 [INFO] PIM - verbosity Logging Level Set of 4

    15/07/2013 09:07:23 [INFO] PIM - PIM INSTANTIATE...

    15/07/2013 09:07:23 [INFO] utility - the file does not exist

    15/07/2013 09:07:23 [INFO] PIM - trying to createOrUpdatePIMDbSchema.

    15/07/2013 09:07:23 [INFO] PIM - schema version current db on computer 1.

    15/07/2013 09:07:23 [INFO] PIM - schema version current db installation 1.

    15/07/2013 09:07:23 [INFO] PIM - PIM DB schema is updated. Current schema version is 1.

    15/07/2013 09:07:23 [INFO] PIM - PIM Database is Up To Date.

    15/07/2013 09:07:23 [INFO] PIM - Updater inventory location: c:\Nouveau file (2) \Adobe presenter 8\Build\Setup\resources\updaterinventory.dll

    15/07/2013 09:07:23 [INFO] PIM - system locking ACF acquired level...

    15/07/2013 09:07:23 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\core\PDApp.pimx

    15/07/2013 09:07:23 [INFO] PIM - XML is valid

    15/07/2013 09:07:23 [WARN] PIM - cannot find the node

    15/07/2013 09:07:23 [INFO] PIM - Package id 5AA1D762-31AF-4FC3-A0C0-66BF663B2117 is already installed

    15/07/2013 09:07:24 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\D6\D6.pimx

    15/07/2013 09:07:24 [INFO] PIM - XML is valid

    15/07/2013 09:07:24 [WARN] PIM - could not find node

    15/07/2013 09:07:24 [INFO] PIM - Package id 54FD72DC-72EC-4CDC-8828-F07C4E9E6FA2 is already installed

    15/07/2013 09:07:24 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\DECore\DECore.pimx

    15/07/2013 09:07:24 [INFO] PIM - XML is valid

    15/07/2013 09:07:24 [WARN] PIM - could not find node

    15/07/2013 09:07:24 [INFO] PIM - Package id 6D2A548B-C50D-46BA-B83E-C8199C6A9406 is already installed

    15/07/2013 09:07:24 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\DWA\DWA.pimx

    15/07/2013 09:07:24 [INFO] PIM - XML is valid

    15/07/2013 09:07:24 [WARN] PIM - could not find node

    15/07/2013 09:07:24 [INFO] PIM - Package id 99477136-88AD-496B-9551-BAE72699A32C is already installed

    15/07/2013 09:07:25 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\P6\P6.pimx

    15/07/2013 09:07:25 [INFO] PIM - XML is valid

    15/07/2013 09:07:25 [WARN] PIM - could not find node

    15/07/2013 09:07:25 [INFO] PIM - id Package FAFC744B-DDFB-4097-A41D-7E9539FEBAF9 is already installed

    15/07/2013 09:07:27 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\LWA\LWA.pimx

    15/07/2013 09:07:27 [INFO] PIM - XML is valid

    15/07/2013 09:07:27 [WARN] PIM - could not find node

    15/07/2013 09:07:27 [INFO] PIM - id Package B322281B-C04F-438E-82D7-7DA34A359526 is already installed

    15/07/2013 09:07:28 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\UWA\UWA.pimx

    15/07/2013 09:07:29 [INFO] PIM - XML is valid

    15/07/2013 09:07:29 [WARN] PIM - cannot find the node

    15/07/2013 09:07:29 [INFO] PIM - id Package B1313DE3-08DF-4834-91D9-CBD1A91488E5 is already installed

    15/07/2013 09:07:29 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\CCM\CCM.pimx

    15/07/2013 09:07:29 [INFO] PIM - XML is valid

    15/07/2013 09:07:29 [WARN] PIM - cannot find the node

    15/07/2013 09:07:29 [INFO] PIM - id Package F0158AAB-0779-4B40-A07D-3F2A21D47E74 is already installed

    15/07/2013 09:07:29 [INFO] PIM - pim_haveEnoughDiskSpaceToInstallPackages reqSize... 29928536

    15/07/2013 09:07:29 [INFO] installation - TimeLog: complete the initial audits

    15/07/2013 09:07:29 [INFO] installation - TimeLog: start the installation

    15/07/2013 09:07:29 [INFO] C:\New - Start by installing the package kernel - Setup folder (2) \Adobe presenter 8\Build\Setup\packages\core\PDApp.pimx

    15/07/2013 09:07:29 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\Setup\packages\core\PDApp.pimx

    15/07/2013 09:07:29 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\core\PDApp.pimx

    15/07/2013 09:07:29 [INFO] PIM - XML is valid

    15/07/2013 09:07:29 [WARN] PIM - cannot find the node

    15/07/2013 09:07:29 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\core\PDApp.pimx.

    15/07/2013 09:07:29 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\core\PDApp.pima.

    15/07/2013 09:07:29 [INFO] PIM - Package id 5AA1D762-31AF-4FC3-A0C0-66BF663B2117 is already installed

    15/07/2013 09:07:29 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:07:31 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:07:31 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:07:32 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:07:32 [WARN] PIM - could not find node

    15/07/2013 09:07:32 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:07:32 [INFO] PIM - created backup file

    15/07/2013 09:07:34 [INFO] utility - the file does not exist

    15/07/2013 09:07:37 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\Setup\packages\core\PDApp.pimx.

    15/07/2013 09:07:38 [INFO] C:\New Setup - finished installing the kernel package - file (2) \Adobe presenter 8\Build\Setup\packages\core\PDApp.pimx, status code returned: 0

    15/07/2013 09:07:38 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\Setup\packages\D6\D6.pimx

    15/07/2013 09:07:38 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\Setup\packages\D6\D6.pimx

    15/07/2013 09:07:38 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\D6\D6.pimx

    15/07/2013 09:07:38 [INFO] PIM - XML is valid

    15/07/2013 09:07:38 [WARN] PIM - cannot find the node

    15/07/2013 09:07:38 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\D6\D6.pimx.

    15/07/2013 09:07:38 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\D6\D6.pima.

    15/07/2013 09:07:38 [INFO] PIM - Package id 54FD72DC-72EC-4CDC-8828-F07C4E9E6FA2 is already installed

    15/07/2013 09:07:39 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:07:39 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:07:39 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:07:39 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:07:39 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:07:39 [INFO] PIM - created backup file

    15/07/2013 09:07:39 [INFO] utility - the file does not exist

    15/07/2013 09:07:42 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\Setup\packages\D6\D6.pimx.

    15/07/2013 09:07:42 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\Setup\packages\D6\D6.pimx

    15/07/2013 09:07:42 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\Setup\packages\DECore\DECore.pimx

    15/07/2013 09:07:42 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\Setup\packages\DECore\DECore.pimx

    15/07/2013 09:07:42 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\DECore\DECore.pimx

    15/07/2013 09:07:42 [INFO] PIM - XML is valid

    15/07/2013 09:07:42 [WARN] PIM - cannot find the node

    15/07/2013 09:07:42 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\DECore\DECore.pimx.

    15/07/2013 09:07:42 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\DECore\DECore.pima.

    15/07/2013 09:07:42 [INFO] PIM - Package id 6D2A548B-C50D-46BA-B83E-C8199C6A9406 is already installed

    15/07/2013 09:07:42 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:07:43 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:07:43 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:07:43 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:07:43 [WARN] PIM - could not find node

    15/07/2013 09:07:43 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:07:43 [INFO] PIM - created backup file

    15/07/2013 09:07:45 [INFO] utility - the file does not exist

    15/07/2013 09:07:47 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\Setup\packages\DECore\DECore.pimx.

    15/07/2013 09:07:48 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\Setup\packages\DECore\DECore.pimx

    15/07/2013 09:07:48 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\Setup\packages\DWA\DWA.pimx

    15/07/2013 09:07:48 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\Setup\packages\DWA\DWA.pimx

    15/07/2013 09:07:48 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\DWA\DWA.pimx

    15/07/2013 09:07:48 [INFO] PIM - XML is valid

    15/07/2013 09:07:48 [WARN] PIM - cannot find the node

    15/07/2013 09:07:48 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\DWA\DWA.pimx.

    15/07/2013 09:07:48 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\DWA\DWA.pima.

    15/07/2013 09:07:48 [INFO] PIM - Package id 99477136-88AD-496B-9551-BAE72699A32C is already installed

    15/07/2013 09:07:48 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:07:48 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:07:48 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:07:48 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:07:48 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:07:48 [INFO] PIM - created backup file

    15/07/2013 09:07:49 [INFO] utility - the file does not exist

    15/07/2013 09:07:53 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\Setup\packages\DWA\DWA.pimx.

    15/07/2013 09:07:53 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\Setup\packages\DWA\DWA.pimx

    15/07/2013 09:07:53 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\Setup\packages\P6\P6.pimx

    15/07/2013 09:07:53 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\Setup\packages\P6\P6.pimx

    15/07/2013 09:07:53 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\P6\P6.pimx

    15/07/2013 09:07:53 [INFO] PIM - XML is valid

    15/07/2013 09:07:53 [WARN] PIM - cannot find the node

    15/07/2013 09:07:53 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\P6\P6.pimx.

    15/07/2013 09:07:53 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\P6\P6.pima.

    15/07/2013 09:07:53 [INFO] PIM - id Package FAFC744B-DDFB-4097-A41D-7E9539FEBAF9 is already installed

    15/07/2013 09:07:53 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:07:54 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:07:54 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:07:54 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:07:54 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:07:54 [INFO] PIM - created backup file

    15/07/2013 09:07:59 [INFO] utility - the file does not exist

    15/07/2013 09:08:04 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\Setup\packages\P6\P6.pimx.

    15/07/2013 09:08:04 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\Setup\packages\P6\P6.pimx

    15/07/2013 09:08:04 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\Setup\packages\LWA\LWA.pimx

    15/07/2013 09:08:04 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\Setup\packages\LWA\LWA.pimx

    15/07/2013 09:08:04 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\LWA\LWA.pimx

    15/07/2013 09:08:04 [INFO] PIM - XML is valid

    15/07/2013 09:08:04 [WARN] PIM - could not find node

    15/07/2013 09:08:04 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\LWA\LWA.pimx.

    15/07/2013 09:08:04 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\LWA\LWA.pima.

    15/07/2013 09:08:04 [INFO] PIM - id Package B322281B-C04F-438E-82D7-7DA34A359526 is already installed

    15/07/2013 09:08:04 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:08:05 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:08:05 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:08:05 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:08:05 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:08:05 [INFO] PIM - created backup file

    15/07/2013 09:08:09 [INFO] utility - the file does not exist

    15/07/2013 09:08:18 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\Setup\packages\LWA\LWA.pimx.

    15/07/2013 09:08:18 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\Setup\packages\LWA\LWA.pimx

    15/07/2013 09:08:18 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\Setup\packages\UWA\UWA.pimx

    15/07/2013 09:08:18 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\Setup\packages\UWA\UWA.pimx

    15/07/2013 09:08:18 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\UWA\UWA.pimx

    15/07/2013 09:08:18 [INFO] PIM - XML is valid

    15/07/2013 09:08:18 [WARN] PIM - could not find node

    15/07/2013 09:08:18 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\UWA\UWA.pimx.

    15/07/2013 09:08:19 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\UWA\UWA.pima.

    15/07/2013 09:08:19 [INFO] PIM - id Package B1313DE3-08DF-4834-91D9-CBD1A91488E5 is already installed

    15/07/2013 09:08:19 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:08:20 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:08:20 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:08:20 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:08:20 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:08:20 [INFO] PIM - created backup file

    15/07/2013 09:08:21 [INFO] utility - the file does not exist

    15/07/2013 09:08:27 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\Setup\packages\UWA\UWA.pimx.

    15/07/2013 09:08:27 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\Setup\packages\UWA\UWA.pimx

    15/07/2013 09:08:27 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\Setup\packages\CCM\CCM.pimx

    15/07/2013 09:08:27 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\Setup\packages\CCM\CCM.pimx

    15/07/2013 09:08:27 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\CCM\CCM.pimx

    15/07/2013 09:08:27 [INFO] PIM - XML is valid

    15/07/2013 09:08:27 [WARN] PIM - could not find node

    15/07/2013 09:08:27 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\CCM\CCM.pimx.

    15/07/2013 09:08:27 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\CCM\CCM.pima.

    15/07/2013 09:08:28 [INFO] PIM - id Package F0158AAB-0779-4B40-A07D-3F2A21D47E74 is already installed

    15/07/2013 09:08:28 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:08:28 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:08:28 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:08:29 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:08:29 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:08:29 [INFO] PIM - created backup file

    15/07/2013 09:08:29 [INFO] utility - the file does not exist

    15/07/2013 09:08:33 [INFO] utility - path to the process: C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe directory of process: \Common Files\Adobe\OOBE\PDApp\\CCM\Utilities arguments C:\Program Files (x 86) being passed: "C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe" - registry = true - createShortcut = true

    15/07/2013 09:08:33 [INFO] utility - success of CreateProcess

    15/07/2013 09:08:35 [INFO] utility - Sucessfully launched and executed the process...

    15/07/2013 09:08:35 [INFO] PIM - executed correctly install modifier to the path: "C:\Program Files (x 86) \Common.

    15/07/2013 09:08:35 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\Setup\packages\CCM\CCM.pimx.

    15/07/2013 09:08:35 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\Setup\packages\CCM\CCM.pimx

    15/07/2013 09:08:35 [INFO] PIM - treatment... _pimCreateOrUpdateAAMInventory

    15/07/2013 09:08:36 [INFO] PIM - inventory already present on the machine...

    15/07/2013 09:08:36 [INFO] installation - TimeLog: installation of the end Lance PDApp.

    15/07/2013 09:08:37 [INFO] installation - path of deployment file not specified in command-line arguments. Skip the deployment of payload part

    15/07/2013 09:08:37 [INFO] installation - = end of Adobe installer. Exit code: 0 =.

    15/07/2013 09:08:37 [INFO] PIM - PIMSqlite closeDB status 0

    15/07/2013 09:08:37 [INFO] FREE PIM - PIM Instance...

    15/07/2013 09:08:37 [INFO] DeploymentManager - Build Version - 3.1.105.0

    15/07/2013 09:08:37 [INFO] DeploymentManager - verbosity Logging Level Set of 4

    15/07/2013 09:08:37 [INFO] DeploymentManager - the code returned by the boot process is (0).

    15/07/2013 09:08:37 [INFO] DeploymentManager - STEP 3: from throw ASU AAM.

    15/07/2013 09:08:37 [INFO] DeploymentManager - bootstrapper launch location is: C:\New folder (2) \Adobe presenter 8\Build\ASU\Set-up.dat

    15/07/2013 09:08:37 [INFO] installation - build Version - 6.2.136.0

    15/07/2013 09:08:37 [INFO] installation - verbosity Logging Level Set of 4

    15/07/2013 09:08:37 [INFO] installation - start the installation of Adobe

    15/07/2013 09:08:37 [INFO] installation - TimeLog: start-up of the bootstrapper

    15/07/2013 09:08:37 [INFO] installation - TimeLog: begin the initial checks

    15/07/2013 09:08:37 [INFO] installation - specified Action - "install".

    15/07/2013 09:08:37 [ERROR] installation - error analysis of the arguments of the command line to the - 'DISABLE_CCM_DESKTOPSHORTCUT '.

    The expected arguments are-

    -mode = silent

    -overrideFile = '< FilePath > ".

    15/07/2013 09:08:37 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\resources\setup.xml

    15/07/2013 09:08:37 [INFO] PIM - XML is valid

    15/07/2013 09:08:37 [WARN] PIM - cannot find the node

    15/07/2013 09:08:37 [INFO] installation - found 7 packages in install manifest

    15/07/2013 09:08:37 [INFO] utility - semaphore is not locked

    15/07/2013 09:08:37 [INFO] PIM - Build Version - 6.2.136.0

    15/07/2013 09:08:37 [INFO] PIM - verbosity Logging Level Set of 4

    15/07/2013 09:08:37 [INFO] utility - the file does not exist

    15/07/2013 09:08:37 [INFO] utility - the file does not exist

    15/07/2013 09:08:37 [INFO] PIM - Build Version - 6.2.136.0

    15/07/2013 09:08:37 [INFO] PIM - verbosity Logging Level Set of 4

    15/07/2013 09:08:37 [INFO] PIM - PIM INSTANTIATE...

    15/07/2013 09:08:37 [INFO] utility - the file does not exist

    15/07/2013 09:08:38 [INFO] PIM - trying to createOrUpdatePIMDbSchema.

    15/07/2013 09:08:38 [INFO] PIM - schema version current db on computer 1.

    15/07/2013 09:08:38 [INFO] PIM - schema version current db installation 1.

    15/07/2013 09:08:38 [INFO] PIM - PIM DB schema is updated. Current schema version is 1.

    15/07/2013 09:08:38 [INFO] PIM - PIM Database is Up To Date.

    15/07/2013 09:08:38 [INFO] PIM - Updater inventory location: c:\Nouveau file (2) \Adobe presenter 8\Build\ASU\resources\updaterinventory.dll

    15/07/2013 09:08:38 [INFO] PIM - system locking ACF acquired level...

    15/07/2013 09:08:38 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\core\PDApp.pimx

    15/07/2013 09:08:38 [INFO] PIM - XML is valid

    15/07/2013 09:08:38 [WARN] PIM - cannot find the node

    15/07/2013 09:08:38 [INFO] PIM - Package id 5AA1D762-31AF-4FC3-A0C0-66BF663B2117 is already installed

    15/07/2013 09:08:38 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\D6\D6.pimx

    15/07/2013 09:08:38 [INFO] PIM - XML is valid

    15/07/2013 09:08:38 [WARN] PIM - cannot find the node

    15/07/2013 09:08:38 [INFO] PIM - Package id 54FD72DC-72EC-4CDC-8828-F07C4E9E6FA2 is already installed

    15/07/2013 09:08:38 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\DECore\DECore.pimx

    15/07/2013 09:08:38 [INFO] PIM - XML is valid

    15/07/2013 09:08:38 [WARN] PIM - cannot find the node

    15/07/2013 09:08:38 [INFO] PIM - Package id 6D2A548B-C50D-46BA-B83E-C8199C6A9406 is already installed

    15/07/2013 09:08:38 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\DWA\DWA.pimx

    15/07/2013 09:08:38 [INFO] PIM - XML is valid

    15/07/2013 09:08:38 [WARN] PIM - cannot find the node

    15/07/2013 09:08:38 [INFO] PIM - Package id 99477136-88AD-496B-9551-BAE72699A32C is already installed

    15/07/2013 09:08:38 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\P6\P6.pimx

    15/07/2013 09:08:39 [INFO] PIM - XML is valid

    15/07/2013 09:08:39 [WARN] PIM - cannot find the node

    15/07/2013 09:08:39 [INFO] PIM - id Package FAFC744B-DDFB-4097-A41D-7E9539FEBAF9 is already installed

    15/07/2013 09:08:39 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\LWA\LWA.pimx

    15/07/2013 09:08:39 [INFO] PIM - XML is valid

    15/07/2013 09:08:39 [WARN] PIM - cannot find the node

    15/07/2013 09:08:39 [INFO] PIM - id Package B322281B-C04F-438E-82D7-7DA34A359526 is already installed

    15/07/2013 09:08:39 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\UWA\UWA.pimx

    15/07/2013 09:08:39 [INFO] PIM - XML is valid

    15/07/2013 09:08:39 [WARN] PIM - cannot find the node

    15/07/2013 09:08:39 [INFO] PIM - id Package B1313DE3-08DF-4834-91D9-CBD1A91488E5 is already installed

    15/07/2013 09:08:39 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\CCM\CCM.pimx

    15/07/2013 09:08:39 [INFO] PIM - XML is valid

    15/07/2013 09:08:39 [WARN] PIM - cannot find the node

    15/07/2013 09:08:39 [INFO] PIM - id Package F0158AAB-0779-4B40-A07D-3F2A21D47E74 is already installed

    15/07/2013 09:08:39 [INFO] PIM - pim_haveEnoughDiskSpaceToInstallPackages reqSize... 29928536

    15/07/2013 09:08:39 [INFO] installation - TimeLog: complete the initial audits

    15/07/2013 09:08:39 [INFO] installation - TimeLog: start the installation

    15/07/2013 09:08:39 [INFO] C:\New - Start by installing the package kernel - Setup folder (2) \Adobe presenter 8\Build\ASU\packages\core\PDApp.pimx

    15/07/2013 09:08:39 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\ASU\packages\core\PDApp.pimx

    15/07/2013 09:08:39 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\core\PDApp.pimx

    15/07/2013 09:08:39 [INFO] PIM - XML is valid

    15/07/2013 09:08:39 [WARN] PIM - cannot find the node

    15/07/2013 09:08:39 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\core\PDApp.pimx.

    15/07/2013 09:08:39 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\core\PDApp.pima.

    15/07/2013 09:08:39 [INFO] PIM - Package id 5AA1D762-31AF-4FC3-A0C0-66BF663B2117 is already installed

    15/07/2013 09:08:39 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:08:39 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:08:39 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:08:39 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:08:39 [WARN] PIM - cannot find the node

    15/07/2013 09:08:39 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:08:40 [INFO] PIM - created backup file

    15/07/2013 09:08:41 [INFO] utility - the file does not exist

    15/07/2013 09:08:45 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\ASU\packages\core\PDApp.pimx.

    15/07/2013 09:08:45 [INFO] C:\New Setup - finished installing the kernel package - file (2) \Adobe presenter 8\Build\ASU\packages\core\PDApp.pimx, status code returned: 0

    15/07/2013 09:08:45 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\ASU\packages\D6\D6.pimx

    15/07/2013 09:08:45 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\ASU\packages\D6\D6.pimx

    15/07/2013 09:08:45 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\D6\D6.pimx

    15/07/2013 09:08:45 [INFO] PIM - XML is valid

    15/07/2013 09:08:45 [WARN] PIM - could not find node

    15/07/2013 09:08:45 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\D6\D6.pimx.

    15/07/2013 09:08:45 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\D6\D6.pima.

    15/07/2013 09:08:45 [INFO] PIM - Package id 54FD72DC-72EC-4CDC-8828-F07C4E9E6FA2 is already installed

    15/07/2013 09:08:45 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:08:45 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:08:45 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:08:45 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:08:45 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:08:45 [INFO] PIM - created backup file

    15/07/2013 09:08:46 [INFO] utility - the file does not exist

    15/07/2013 09:08:49 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\ASU\packages\D6\D6.pimx.

    15/07/2013 09:08:49 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\ASU\packages\D6\D6.pimx

    15/07/2013 09:08:49 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\ASU\packages\DECore\DECore.pimx

    15/07/2013 09:08:49 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\ASU\packages\DECore\DECore.pimx

    15/07/2013 09:08:49 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\DECore\DECore.pimx

    15/07/2013 09:08:49 [INFO] PIM - XML is valid

    15/07/2013 09:08:49 [WARN] PIM - cannot find the node

    15/07/2013 09:08:49 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\DECore\DECore.pimx.

    15/07/2013 09:08:49 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\DECore\DECore.pima.

    15/07/2013 09:08:49 [INFO] PIM - Package id 6D2A548B-C50D-46BA-B83E-C8199C6A9406 is already installed

    15/07/2013 09:08:49 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:08:49 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:08:49 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:08:49 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:08:49 [WARN] PIM - cannot find the node

    15/07/2013 09:08:49 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:08:49 [INFO] PIM - created backup file

    15/07/2013 09:08:51 [INFO] utility - the file does not exist

    15/07/2013 09:08:53 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\ASU\packages\DECore\DECore.pimx.

    15/07/2013 09:08:53 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\ASU\packages\DECore\DECore.pimx

    15/07/2013 09:08:53 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\ASU\packages\DWA\DWA.pimx

    15/07/2013 09:08:53 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\ASU\packages\DWA\DWA.pimx

    15/07/2013 09:08:53 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\DWA\DWA.pimx

    15/07/2013 09:08:53 [INFO] PIM - XML is valid

    15/07/2013 09:08:53 [WARN] PIM - cannot find the node

    15/07/2013 09:08:53 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\DWA\DWA.pimx.

    15/07/2013 09:08:53 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\DWA\DWA.pima.

    15/07/2013 09:08:55 [INFO] PIM - Package id 99477136-88AD-496B-9551-BAE72699A32C is already installed

    15/07/2013 09:08:55 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:08:55 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:08:55 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:08:55 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:08:55 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:08:55 [INFO] PIM - created backup file

    15/07/2013 09:08:55 [INFO] utility - the file does not exist

    15/07/2013 09:08:58 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\ASU\packages\DWA\DWA.pimx.

    15/07/2013 09:08:58 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\ASU\packages\DWA\DWA.pimx

    15/07/2013 09:08:58 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\ASU\packages\P6\P6.pimx

    15/07/2013 09:08:58 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\ASU\packages\P6\P6.pimx

    15/07/2013 09:08:58 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\P6\P6.pimx

    15/07/2013 09:08:58 [INFO] PIM - XML is valid

    15/07/2013 09:08:58 [REPORT] PIM - cannot find the node

    15/07/2013 09:08:58 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\P6\P6.pimx.

    15/07/2013 09:08:58 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\P6\P6.pima.

    15/07/2013 09:08:59 [INFO] PIM - id Package FAFC744B-DDFB-4097-A41D-7E9539FEBAF9 is already installed

    15/07/2013 09:08:59 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:08:59 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:08:59 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:08:59 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:08:59 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:08:59 [INFO] PIM - created backup file

    15/07/2013 09:09:03 [INFO] utility - the file does not exist

    15/07/2013 09:09:11 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\ASU\packages\P6\P6.pimx.

    15/07/2013 09:09:11 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\ASU\packages\P6\P6.pimx

    15/07/2013 09:09:11 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\ASU\packages\LWA\LWA.pimx

    15/07/2013 09:09:11 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\ASU\packages\LWA\LWA.pimx

    15/07/2013 09:09:11 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\LWA\LWA.pimx

    15/07/2013 09:09:11 [INFO] PIM - XML is valid

    15/07/2013 09:09:11 [WARN] PIM - cannot find the node

    15/07/2013 09:09:11 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\LWA\LWA.pimx.

    15/07/2013 09:09:11 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\LWA\LWA.pima.

    15/07/2013 09:09:11 [INFO] PIM - id Package B322281B-C04F-438E-82D7-7DA34A359526 is already installed

    15/07/2013 09:09:11 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:09:11 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:09:11 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:09:12 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:09:12 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:09:12 [INFO] PIM - created backup file

    15/07/2013 09:09:15 [INFO] utility - the file does not exist

    15/07/2013 09:09:23 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\ASU\packages\LWA\LWA.pimx.

    15/07/2013 09:09:23 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\ASU\packages\LWA\LWA.pimx

    15/07/2013 09:09:23 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\ASU\packages\UWA\UWA.pimx

    15/07/2013 09:09:23 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\ASU\packages\UWA\UWA.pimx

    15/07/2013 09:09:23 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\UWA\UWA.pimx

    15/07/2013 09:09:23 [INFO] PIM - XML is valid

    15/07/2013 09:09:23 [WARN] PIM - cannot find the node

    15/07/2013 09:09:23 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\UWA\UWA.pimx.

    15/07/2013 09:09:23 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\UWA\UWA.pima.

    15/07/2013 09:09:24 [INFO] PIM - id Package B1313DE3-08DF-4834-91D9-CBD1A91488E5 is already installed

    15/07/2013 09:09:24 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:09:24 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:09:24 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:09:24 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:09:24 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:09:24 [INFO] PIM - created backup file

    15/07/2013 09:09:25 [INFO] utility - the file does not exist

    15/07/2013 09:09:31 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\ASU\packages\UWA\UWA.pimx.

    15/07/2013 09:09:32 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\ASU\packages\UWA\UWA.pimx

    15/07/2013 09:09:32 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\ASU\packages\CCM\CCM.pimx

    15/07/2013 09:09:32 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\ASU\packages\CCM\CCM.pimx

    15/07/2013 09:09:32 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\CCM\CCM.pimx

    15/07/2013 09:09:32 [INFO] PIM - XML is valid

    15/07/2013 09:09:32 [WARN] PIM - could not find node

    15/07/2013 09:09:32 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\CCM\CCM.pimx.

    15/07/2013 09:09:32 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\CCM\CCM.pima.

    15/07/2013 09:09:32 [INFO] PIM - id Package F0158AAB-0779-4B40-A07D-3F2A21D47E74 is already installed

    15/07/2013 09:09:32 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:09:33 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:09:33 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:09:33 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:09:33 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:09:33 [INFO] PIM - created backup file

    15/07/2013 09:09:33 [INFO] utility - the file does not exist

    15/07/2013 09:09:35 [INFO] utility - path to the process: C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe directory of process: \Common Files\Adobe\OOBE\PDApp\\CCM\Utilities arguments C:\Program Files (x 86) being passed: "C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe" - registry = true - createShortcut = true

    15/07/2013 09:09:36 [INFO] utility - success of CreateProcess

    15/07/2013 09:09:37 [INFO] utility - Sucessfully launched and executed the process...

    15/07/2013 09:09:37 [INFO] PIM - executed correctly install modifier to the path: "C:\Program Files (x 86) \Common.

    15/07/2013 09:09:37 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\ASU\packages\CCM\CCM.pimx.

    15/07/2013 09:09:37 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\ASU\packages\CCM\CCM.pimx

    15/07/2013 09:09:37 [INFO] PIM - treatment... _pimCreateOrUpdateAAMInventory

    15/07/2013 09:09:37 [INFO] PIM - inventory already present on the machine...

    15/07/2013 09:09:37 [INFO] installation - TimeLog: installation of the end Lance PDApp.

    15/07/2013 09:09:37 [INFO] installation - path of deployment file not specified in command-line arguments. Skip the deployment of payload part

    15/07/2013 09:09:37 [INFO] installation - = end of Adobe installer. Exit code: 0 =.

    15/07/2013 09:09:37 [INFO] PIM - PIMSqlite closeDB status 0

    15/07/2013 09:09:37 [INFO] FREE PIM - PIM Instance...

    15/07/2013 09:09:37 [INFO] DeploymentManager - Build Version - 3.1.105.0

    15/07/2013 09:09:37 [INFO] DeploymentManager - verbosity Logging Level Set of 4

    15/07/2013 09:09:37 [INFO] DeploymentManager - the code returned by the boot process is (0).

    15/07/2013 09:09:37 [INFO] DeploymentManager - correction of dependencies in local db.

    15/07/2013 09:09:37 [INFO] DeploymentManager - no db media present on the machine.

    15/07/2013 09:09:37 [INFO] DeploymentManager - STEP 4: start the Adobe installer.

    15/07/2013 09:09:37 [INFO] DeploymentManager - path of the common Adobe got.

    15/07/2013 09:09:37 [INFO] DeploymentManager - Installer Adobe launch location is: C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp\DECore\Setup.exe

    15/07/2013 09:16:50 [INFO] AAMEEUtilities - creation process is complete.

    15/07/2013-09:16:50 [FATAL] DeploymentManager - the code returned by the Adobe installation process is (6). Stop the installation process.

    15/07/2013 09:16:50 [INFO] DeploymentManager - begins to clean partially recessed payloads.

    {15/07/2013 09:16:50 [INFO] DeploymentManager - undeployment XML created to the path: D:\Users\Vmbuild\AppData\Local\Temp\{2592DDC9-72BD-430A-B2EA-C2839B69B46E}\\{EE4FEE4B-4C1 3 - 44E5 - 8 c 22-230423DB10EF}

    15/07/2013 09:16:50 [INFO] DeploymentManager - begins to launch the Adobe installer to uninstall mode.

    15/07/2013 09:16:50 [INFO] DeploymentManager - path of the common Adobe got.

    15/07/2013 09:16:50 [INFO] DeploymentManager - C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp\DECore\Setup.exe

    15/07/2013 09:20:21 [INFO] PIM-uninstall - Version Build - 6.2.136.0

    15/07/2013 09:20:21 [INFO] PIM-Uninstall - verbosity Logging Level Set of 4

    15/07/2013 09:20:21 [INFO] PIM-uninstall - Start: uninstall Adobe Application Manager...

    15/07/2013 09:20:21 [INFO] PIM-Uninstall - County of SIDES occurs

    15/07/2013 09:20:21 [INFO] PIM-Uninstall - SIDES produced install status

    15/07/2013 09:20:21 [INFO] PIM-Uninstall - get the NO SIDE product count

    15/07/2013 09:20:21 [INFO] utility - file does not exist

    15/07/2013 09:20:21 [INFO] PIM-Uninstall - AAMRefs folder does not exist. Products non-cotes does not exist on the system

    15/07/2013 09:20:21 [INFO] PIM-Uninstall - SIDES NOT produced install status

    15/07/2013 09:20:21 [INFO] utility - the file does not exist

    15/07/2013 09:20:22 [INFO] utility - the file does not exist

    15/07/2013 09:20:22 [INFO] PIM-uninstall - launch RemoveAAM to: C:\Program Files (x 86) \Common Files\Adobe\RemoveAAM.bin

    15/07/2013 09:20:22 [INFO] UninstallAAM - argc: 2

    15/07/2013 09:20:22 [INFO] UninstallAAM - PIM.dll starting from loading: C:\Program Files (x 86) \Common Files\Adobe\AdobePIM.dll

    15/07/2013 09:20:22 [INFO] AAMEEUtilities - creation process is complete.

    15/07/2013 09:20:22 [INFO] DeploymentManager - the code returned by the Adobe installation process is (0).

    {15/07/2013 09:20:22 [INFO] DeploymentManager - sizing tool launch location is: D:\Users\Vmbuild\AppData\Local\Temp\{0EAD2103-39AF-4D85-B942-CAC0E462C482}\\{731F139B-D8D 6-4870-AA90-9626C4D6D4E2}

    15/07/2013 09:20:22 [INFO] PIM-uninstall - Version Build - 6.2.136.0

    15/07/2013 09:20:22 [INFO] PIM-Uninstall - verbosity Logging Level Set of 4

    15/07/2013 09:20:22 [INFO] PIM-Uninstall - killing all deployment workflows

    15/07/2013 09:20:22 [INFO] PIM-Uninstall - Check and wait on the installation of Adobe (Bootstrapper) runs...

    15/07/2013 09:20:22 [INFO] PIM-Uninstall - Check and wait on installation of Adobe (SIDES) if running...

    15/07/2013 09:20:22 [INFO] PIM-Uninstall - Check and wait if ACF is locked...

    15/07/2013 09:20:22 [INFO] PIM-Uninstall - Check and close notifiers Adobe Application Manager...

    15/07/2013 09:20:22 [INFO] utility - semaphore is not locked

    15/07/2013 09:20:22 [INFO] PIM - modifying installation execution

    15/07/2013 09:20:22 [INFO] PIM - Build Version - 6.2.136.0

    15/07/2013 09:20:22 [INFO] PIM - verbosity Logging Level Set of 4

    15/07/2013 09:20:22 [INFO] PIM - PIM INSTANTIATE...

    15/07/2013 09:20:22 [INFO] utility - the file does not exist

    15/07/2013 09:20:22 [INFO] PIM - trying to createOrUpdatePIMDbSchema.

    15/07/2013 09:20:22 [INFO] PIM - schema version current db on computer 1.

    15/07/2013 09:20:22 [INFO] PIM - schema version current db installation 1.

    15/07/2013 09:20:22 [INFO] PIM - PIM DB schema is updated. Current schema version is 1.

    15/07/2013 09:20:22 [INFO] PIM - PIM Database is Up To Date.

    15/07/2013 09:20:23 [INFO] utility - path to the process: C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe directory of process: \Common Files\Adobe\OOBE\PDApp\\CCM\Utilities arguments C:\Program Files (x 86) being passed: "C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe" - unregister = true - deleteShortcut = true

    15/07/2013 09:20:23 [INFO] utility - success of CreateProcess

    15/07/2013 09:20:23 [INFO] AAMEEUtilities - creation process is complete.

    15/07/2013 09:20:23 [INFO] DeploymentManager - the return Code of the tool in service (0).

    15/07/2013 09:20:23 [INFO] DeploymentManager - commissioning tool succeeded UnSerialize the product.

    15/07/2013 09:20:23 [INFO] DeploymentManager - install workflow ends.

    15/07/2013 09:20:25 [INFO] utility - Sucessfully launched and executed the process...

    15/07/2013 09:20:25 [INFO] PIM - executed properly uninstall modifier to the path: "C:\Program Files (x 86) \Common.

    15/07/2013 09:20:25 [INFO] PIM - PIMSqlite closeDB status 0

    15/07/2013 09:20:25 [INFO] FREE PIM - PIM Instance...

    15/07/2013 09:20:33 [INFO] UninstallAAM - Self delete to delete RemoveAAM.bin and AdobePIM.dll...

    1. Office 2010 64 bit as a dependency.

    2. the register used to deceive the 64-bit version of PowerPoint application is already installed.

    Even though source works with 32-bit powerPoint. but need to MSI 64-bit powerpoint.

  • I received between 18 and 22 error codes while trying to install Adobe Presenter and Video Express.  I need the program to work and have more to spend on getting this work hours.  All of the suggestions.

    Here are my Error Codes:

    Exit Code: 6 Please see specific errors below for troubleshooting. For example, ERROR: DF023, DW063 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 18 error(s) ----------- Payload: Microsoft Visual C++ 2008 Redistributable Package (x86) 9.0.30729.5677 {539B5BB0-18F9-11E2-BBBC-00215AEA26C9} ----------- ERROR: Third party payload installer vcredist_x86.exe failed with exit code: 1603 ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\Owner\Desktop\Adobe Presenter 10A\Adobe Presenter 10\Presenterwin32\payloads\Microsoft VC 2008 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x86) from Microsoft website - www.microsoft.com ----------- Payload: Microsoft Visual C++ 2010 Redistributable Package (x86) 10.0.40219.325 {55B82130-18F9-11E2-8D43-00215AEA26C9} ----------- ERROR: Third party payload installer vcredist_x86.exe failed with exit code: 1603 ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\Owner\Desktop\Adobe Presenter 10A\Adobe Presenter 10\Presenterwin32\payloads\Microsoft VC 2010 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x86) from Microsoft website - www.microsoft.com ----------- Payload: Microsoft Visual C++ 2008 Redistributable Package (x64) 9.0.30729.5677 {512B6D21-18F9-11E2-93C1-00215AEA26C9} ----------- ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 1603 ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\Owner\Desktop\Adobe Presenter 10A\Adobe Presenter 10\Presenterwin32\payloads\Microsoft VC 2008 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x64) from Microsoft website - www.microsoft.com ----------- Payload: Microsoft Visual C++ 2010 Redistributable Package (x64) 10.0.40219.325 {54B0C34F-18F9-11E2-BC1D-00215AEA26C9} ----------- ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 1603 ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\Owner\Desktop\Adobe Presenter 10A\Adobe Presenter 10\Presenterwin32\payloads\Microsoft VC 2010 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x64) from Microsoft website - www.microsoft.com ----------- Payload: Adobe Presenter 10.0 10.0.0.0 {50BB8FAA-F197-11E3-93FD-DBD677F87EC9} ----------- ERROR: DF023: Unable to delete backup file at "C:\Users\Owner\AppData\Local\Temp\TalkToAdobeFlashPlayerTrust.cfg". Error 2 The system cannot find the file specified.. Try setting correct permissions to the specified file/folder or parent folder, so that admin has rights to modify it.(Seq 2029) ERROR: DW063: Error committing command ARKFlashPlayerTrustFileCommand(Seq 2029) ERROR: DF023: Unable to delete backup file at "C:\Users\Owner\AppData\Local\Temp\TalkToAdobeFlashPlayerTrust.cfg". Error 2 The system cannot find the file specified.. Try setting correct permissions to the specified file/folder or parent folder, so that admin has rights to modify it.(Seq 2028) ERROR: DW063: Error committing command ARKFlashPlayerTrustFileCommand(Seq 2028) ERROR: DF023: Unable to delete backup file at "C:\Users\Owner\AppData\Local\Temp\TalkToAdobeFlashPlayerTrust.cfg". Error 2 The system cannot find the file specified.. Try setting correct permissions to the specified file/folder or parent folder, so that admin has rights to modify it.(Seq 2027) ERROR: DW063: Error committing command ARKFlashPlayerTrustFileCommand(Seq 2027) ERROR: DF023: Unable to delete backup file at "C:\Users\Owner\AppData\Local\Temp\TalkToAdobeFlashPlayerTrust.cfg". Error 2 The system cannot find the file specified.. Try setting correct permissions to the specified file/folder or parent folder, so that admin has rights to modify it.(Seq 2026) ERROR: DW063: Error committing command ARKFlashPlayerTrustFileCommand(Seq 2026) ERROR: DF023: Unable to delete backup file at "C:\Users\Owner\AppData\Local\Temp\TalkToAdobeFlashPlayerTrust.cfg". Error 2 The system cannot find the file specified.. Try setting correct permissions to the specified file/folder or parent folder, so that admin has rights to modify it.(Seq 2025) ERROR: DW063: Error committing command ARKFlashPlayerTrustFileCommand(Seq 2025) ------------------------------------------------------------------------------------- 

    The system configuration required

    uninstall the old ms vc packages and install the last last supported Visual C++ downloads

  • Adobe Presenter 8.1 Win 7 trial installing does not complement PPT

    I contemplating the purchase of a presenter 8.1 and downloaded the demo of Win7. After installation, I noticed that the Power Point 2010 does not have the add-in installed. I checked in the add-in for people with reduced mobility Manager add ins and COM add-ins Two areas of PPT 2010 doesn't have this plug in installed. I tried to reboot, installed again and nothing works. Is there something I need to do to the 8.1 presenter to make the PPT plug in install?

    I note also that presenter access not built in camera on the laptop either. In the settings menu presenter, all cursors for camera options are disabled. There may be a driver problem?

    Any suggestions?

    OK, let's tackle one thing at a time.

    Presenter is not installed:

    What version of PPT 10 are using you, 32 bit or 64 bit? Are you sure that you downloaded the correct version of the installer? If you get the 64 bit or 32 bit version should be linked at PPT version you have installed, not the version of your OS. The run installation program and finish? Were there any error codes?

    Presenter, access your camera:

    When you use the Adobe Presenter video creator (APVC) tool, you get error messages? If your camera is not compatible, you should know that when he tries to access it. If you get a general error on using make sure APVC that your graphics card drivers are up to date. You will need the latest driver.

    If you are trying to access your camera via APVC, how you try to access your camera in presenter?

  • When you install Adobe Presenter, get error message not compatible platform.

    When you install Adobe Presenter, get error message not compatible platform.

    Check the tech specifications to see if your system meets the minimum requirements for the software.

  • How to silently install Adobe Captivate 4

    Hello
    I tried to use the KB 325175 and apply the same command line used in Captivate 3 of the new Captivate 4:

    Setup.exe /s /v "/qn SERIALNUMBER = \"xxxxxxxxxxxxxxxxxxxxxxxx\"ALLUSERS = 1 REBOOT = ReallySuppress"

    However, I had full UI, and he stopped on the screen asking me serial number. Is it possible to install Adobe Captivate 4 silently without any user interaction, and what are the new command line switches?

    Thank you very much
    Peter

    Adobe Captivate 4 uses a different facility than Captivate 3 technology and therefore the way silent installation is done has changed.
    The 405451 knowledge base article # provides all the details:

    http://www.Adobe.com/go/kb405451

    In addition, he is a very good white paper:

    http://www.Adobe.com/aboutadobe/OpenOptions/PDFs/manualenterprisedeployment_cs4_help.PDF

    There are a few steps required before running the silent installation:

    1. run setup.exe - record = 1
    This will run the installer without installing the software and it will record the serial number and the rest of the settings, more, it creates 'Adobe Captivate 4.install.xml' and 'Adobe Captivate 4.remove.xml' files in the folder "C:\Program Files\Fichiers Files\Adobe\Installers". Copy the two above newly create files in the same folder where the setup.exe is and rename them install.xml and remove.xml respectively.

    2. create a file named "application.xml.override" in the folder "\payloads\AdobeCaptivate4en_US". Paste the following in this file content:




    Delete
    Delete
    Delete

    This will remove the EULA, registration and the updates.

    3 enforce
    configuration mode-= silent - deploymentFile = install.xml

    It will silently work the installation of Adobe Captivate 4.

    Thanks to Adobe Ashish Garg!

    Best regards
    Peter Makaveev

  • Real key 'Silent Install'

    Try to uninstall the real key that has been installed with Acrobat Reader without any request for leave. Does not appear in programs and features or Revo Uninstaller. I found the folder and deleted, but this is not the same as uninstalling.

    I also noticed that file config for genuine key (below), where they refer to this installation as Adobe "installation in silent mode." campaign  No best practices, guys.

    Anyone know how to uninstall this when hidden?

    TruKey-SilentCampaign.JPG

    It should be in the Uninstall list. Have you looked under 'I' into alphabetical order, because it is manufactured by Intel? Although attempts to use other means to uninstall may have left impossible to uninstall unless you can do a repair. rom-my-Windows-device - https://help.truekey.com/HC/en-us/articles/212870718-how-do-I-uninstall-the-true-key-app-f

  • Adobe AIR is not install on El Capitan... tried several times... weeks apart.

    I tried to install Adobe AIR so I can use Pandora, but after downloading, open, accept the terms and enter your password in the progress window reads "Facility" with no progress. I made this several times and weeks apart. Nothing.

    On my laptop with an older OS it is installed without any problem.

    Any chance someone can look into it?

    Screenshot 2016-05-26 19.29.04.png

    Nada.

    We run into this as well - 10.11.5 OSX

    Note: it looks like the installation via the command line works, it's just the GUI installer that broke

    /path/to/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer -silent -eulaAccepted -pingbackAllowed`

  • Adobe Presenter video Express: problem with webcam Logitech c920

    Hello

    I have a problem with Adobe Presenter Video Express, when I want to use the camera Logitech c920. (computer laptop Dell Vostro 3560, Windows 7-64 bit, 8 GB of RAM, memory)

    When I launch the program and start creating the new project, I see only a black screen with the error message "your webcam is busy or it does not." "Try closing other applications that might be using the webcam and select it again. But when I press "record", program begins to make the video - and the webcam works. My problem is that I can't use video effects to change the background: I can't see Preview video/webcam with button "make my impressive background." When I switch to the integrated webcam, it works without problems, including the function of substantive change.

    I have closed all other programs. I restarted the laptop. I deleted and reinstalled the drivers for the camera. But it still does not work properly.

    Any suggestions how to solve the problem?

    Thank you

    Hi George,.

    In our tests, we saw that the Logitech C920, must the last driver of Logitech and the software must be installed so that it works correctly. Please make sure that you are picking the latest driver from the following link:

    http://support.Logitech.com/product/HD-Pro-webcam-C920#download

    If installing this driver does not resolve this issue, then please try the following:

    1. Sometimes, the webcam is busy on the launch of the app. Select the camera, then the Logitech camera to try a fix for this problem.
    2. Some Bluetooth drivers interfere with the functioning of the app. Disable all Bluetooth devices and see if it solves the problem.
    3. Send us a journal of diagnosis of the problem. You can follow the steps in this link to launch the application in diagnostic mode: presenter help | Adobe Presenter Video Express (Windows & Mac) . When you close the application, you will need to send us the diagnostic log. Please send it to [email protected] . A journal of diagnosis can help us to quickly solve the problem.

    If the problem is not resolved, can we get a Connect session to debug the issue? You can contact us at [email protected] with a suitable date and time, and we will solve it through Connect. We are available Monday - Friday, 18:30 - 11:30 PST.

    Thank you

    Renzil D'Souza ([email protected])

    Presenter engineering team

    PS: as a temporary workaround, you can check without changing the background, then the change in the background inside the editor using the option "Video improve."

  • Adobe Presenter 11 is compatible with 32 and 64 bit versions of PowerPoiint?

    I have a desktop operating system and 32 bit 64 bit and want to know if Adobe Presenter 11 is compatible. Thank you.

    Yes, it is compatible with the OS 64-bit and 32-bit Office.

    The installer will take care of it and install the appropriate presenter.

    Thank you

    ALPI Agarwal

    Adobe Presenter Engineering Team

  • Issue of Adobe Presenter 7

    I installed the Adobe Presenter 7.0.7.

    Adobe - Adobe Presenter: for Windows: Adobe Presenter 7.0.7 - English: thank you

    After you have selected the Adobe Presenter license start Powerpoint 2010 Agreement screen was displayed.

    But by pressing the "I agree" button of the screen of the license agreement is not a reaction.

    error.png

    I closed with force the unfounded PowerPoint2010.

    It can also be closed, it was just a way to forced retirement.

    What should I do to accept the license agreement?

    Help, please.

    Operating environment:

    Windows7 64 bit

    Office 2010

    Adobe Presenter 7.0.7

    Hello

    Can you try the procedure described in the link below and check if it solves the problem:

    http://blogs.Adobe.com/Captivate/2011/06/Adobe-Presenter-EULA-issues.html

    Kind regards

    MILIN

  • Adobe Presenter publish free test number

    Installed Adobe Presenter 10 free trial.  Tried to publish a presentation to the zip file locally.  According to the user manual, it must be an index.htm file that I can double-click on the zip file and the presentation will open in Internet Explorer. There is no file index.htm, but there is an index file.  By clicking on the index file, it opens in IE, but the presentation does not load.  Unable to find resolutions on the internet, so I reached out using Adobe.  They claim that the "Trial" version has all the features that the full version license.  Does anyone know if the publication is not completely functional in the trial version?

    File extensions are not disable showing everything simply is not for known files. He does what he's supposed to do, run IE, but when he recalls the support files, they are not available because you are trying to play within a ZIP file. Check out the content in the zip and then launch the index file.

  • Replacing text splash Adobe Presenter - v9

    Hellou everyone, last week I upgraded to 9 presenter. Please, know someone where I can find and replace text Adobe Presenter on the start screen, loading exported 9 presenter courses? In an earlier version of Presenter 8, it is inside the file (text, uiname... wpconfig »).  But this line of the uiname text file I can't to find inside the presenter 9 instalation.

    Thanks for any help.

    Best regards

    Yarik

    I introduce 8 that I just modified the language.xml file located in C:\Users\{UserName}\AppData\Local\Adobe\Adobe Presenter\Themes (path of file of Windows 7/8). Then, this text can be changed in the theme via the button editor edit the text labels. Add the following text to the file:

    I did it after the quiz pod and text message list, but you should be able to put it anywhere. Then, when you go into the tool change text labels, it should show here and you can modify it as you see fit.

  • Adobe Presenter in Adobe eLearning Suite 2 and Microsoft Office 2010 installation

    I need help to install the Adobe Presenter software. I have E-Learning Suite 2 and Microsoft Office 2010. The rest of the complete Installation of E-Learning has been made, including Adobe Presenter. When I navigate to the folder C:\Program Files (x 86) \Adobe\Adobe Presenter 7 Installer for eLS 2\7.0\en_US files and try to install the adobe_presenter_patch_v701.exe file it asks for a serial number. I enter the serial number of the E-Learning Suite in the box, but she did not accept the serial number.

    I did a google search on it and got the below link:

    l http://blogs.adobe.com/Captivate/2010/09/MS-PowerPoint-2010-support-in-Adobe-Presenter.htm

    I downloaded 2 patches of the viz Adobe Presenter 7.0.1 update link and Adobe Presenter 7.07 below updated and tried to run. Which failed.

    http://www.Adobe.com/support/downloads/product.jsp?product=153 & Platform = Windows

    Can someone offer you please help in this as to what patches to download and run.

    The Microsoft Office installed on my system is a 32-bit.

    If you want to use the presenter 7.0.6 (note that it is an Action Script 2 [AS2] application and will not work live Connect, or any other AS3 application), you must follow the steps described here: http://helpx.adobe.com/presenter/kb/install-presenter-7-office-2010.html

    If you want to use the presenter 7.0.7 (AS3), it's a stand alone Installer, and previous versions of the presenter must be uninstalled everything first. The steps to install 7.0.7 can be found here: http://helpx.adobe.com/presenter/kb/upgrade-presenter-7-0-6.html

Maybe you are looking for

  • How to return a dial removed

    How to return a dial removed

  • Loud noise clicking noise when you try to play a DVD

    HP Pavilion d4995t desktop PC with High Definition Realteck Audio Ultimate.  Vista Premium o/s.  I play my sound through my HDMI cable to the speakers in my monitor. When I try to play a DVD in the DVD player, I get a loud clicking with no sound from

  • NB100 - how to upgrade to XP Professional?

    Hello I bought Toshiba NB100 laptop with the original XP version. I am doing an upgrade to XP Profesional but have a problem. It doesn't let me do that portable version a service pack 3 and my version of XP Profesional SP2 only. I tried to put the CD

  • Cloud

    I bought a new iPad 2 Air to replace my old iPad 2. I transferred all my stuff on new iPad Air. I don't have the old iPad backup and I'm going to wipe clean to give to my daughter. I can now delete the backup I noticed that in my closet for old iPad

  • Question of CLSID for the Windows registry

    I have a ton of entries under HKEY_CLASSES_ROOT\CLSID\ who have no default value set for InprocServer32 Have I reason to think that, if no DLL is listed to load these entries are just too much room? can I remove all these with no ill effects? It seem