Advanced Backup Agent SQL POS show all database
Hi all
I use VDP Advanced 6.0 successfully, I installed the backup SQL on a 2012 SQL Server Agent and added permissions to NT BuiltIN system and it is currently showing all databases console backup of POS, I have another server which is installed SQL server 2008 and SQL management Studio 2012, but the problem is that it shows not all SQL Agent database I thought it was a permission problem, but after some research on the net I found an EMC forum by saying that it was because of wrong dll loading and it was loading the DLL for SQL 2012 then I ran the CMD:
first of all, I have renamed the dll of 2012 sql as suggested from the emc forum and rerun the cmd
the solution is to rename the dll, it's the solution in quotes:
The following DLL files are located in C:\Program Files\avs\bin (default install Avamar customer location).
avsqlsmo11.dll
avsqlsmo08.dll
avsqlsmo.dll
When the SQL plugin detects SQL 2012, it loads avsqlsmo11.dll. It load avsqlsmo08.dll for avsqlsmo.dll for SQL 2005 and SQL 2008.
When you rename avsqlsmo11.dll, the client will then return to avsqlsmo08.dll. The customer will return to an earlier version when it cannot meet the DLL, it wants to take on version detection. If the client detects SQL 2008 even if SQL server is 2005, rename it avsqlsmo08.dll and it will load avsqlsmo.dll.
and I run the cmd:
C:\Program Files\avp\bin > avsql - operation = browse - verbose
and the result is:
C:\Program Files\avp\bin > avsql - operation = browse - verbose
Dynamically allocated CTL listening port (49491)
avsql Info < 6673 >: CTL is listening on port 49491
avsql Info < 19484 >: = > sqlconnectimpl::check_smo_version
avsql < 19482 > Info: assembly were found: ' Microsoft.SqlServer.Smo, fileVersion = "10.50.
2500,0 ", version ="10.0.0.00000","neutral"= culture, publicKeyToken = 89845DCD8080CC9"
1 "processorArchitecture ="MSIL"'
avsql < 19482 > Info: assembly were found: ' Microsoft.SqlServer.Smo, fileVersion = "11.0.3
000.0 ", version ="11.0.0.0000","neutral"= culture, publicKeyToken ="89845DCD8080CC91.
, processorArchitecture = "MSIL" '
avsql < 19482 > Info: assembly were found: ' Microsoft.SqlServer.Smo, fileVersion = "10.0.1
600,22 ", version ="10.0.0.00000","neutral"= culture, publicKeyToken = 89845DCD8080CC9"
1 "processorArchitecture ="MSIL"'
avsql < 19483 > Info: return of checking version SMO with value: 12
Info < 0000 avsql >: < = sqlconnectimpl::check_smo_version
avsql < 19487 > Info: start checking for SMO DLL version 12...
avsql Info < 19484 >: = > sqlconnectimpl::is_SqlServ_2011
avsql Info < 19484 >: = > sqlconnectimpl::get_SqlServers_ver
avsql < 10684 > Info: message version of ctl setting to 3 (starting from 1)
avsql < 16136 > Info: definition of ctl to 268435456 max message size
avsql < 19468 > Info: connected to the ROOT\CIMV2 WMI namespace.
I rebooted windows server, I reinstalled Dot Net 4.5.1 and restarted again, but still the same problem when I run the Backup Wizard and click on the server, it does not show databases, anyone had a similar problem? Thanks for help
EDit: I have attached a log file of the CMD: avsql - operation = browse - verbose--logfile = AVA_GUI_browse.txt
To resolve this problem, I used a server with SQL 2008 installed on it and another with SQL 2012 installed on it.
so conclusion: each server must have a single version of installed SQL not mixed.
Tags: VMware
Similar Questions
-
Please: sql script to remove all users without objects on all databases
Hi *.
I need a big help each of you please.
I have many users who is not more work in our society. Some who receive objects are locked. There are a lot of users and many database servers. And it's that long to finish this work.
That the why I need your help to give me Scripts anyone who falls all users who have not all objects in all databases on all the oracle Server.
Und other to import all users of all users who still get items in a table. And I guess to do before Friday 03 July 09.
Thank you very much in advance
Sincerely your
Ora_Genie>
Vincent wrote:
to give you all the users with no object.To simplify can run the script generated by
>Hi Michaels,
This may not work
SQL> Create user michaels identified by michaels 2 / User created SQL> SELECT 'drop user ' || owner || ' cascade;' stmt 2 FROM all_objects 3 Group BY owner 4 Having Count(*) = 0; STMT -------------------------------------------------
Maybe this,.
SELECT 'drop user ' || a.username || ' cascade;' stmt FROM all_users a , all_objects b WHERE a.username = b.owner(+) AND b.owner Is Null Group BY a.username
Kind regards
Christian BalzPublished by: Christian Balz 07/02/2009 11:18
-
There is no "Import and backup" button in "show all bookmarks".
I try to import bookmarks from an HTML file, using the isntructions to https://support.mozilla.com/en-US/kb/Importing%20Bookmarks%20from%20an%20HTML%20File?as=aaq#os=linux & browser = fx7
I click on bookmarks-> show all bookmarks.
The next step, said "from the toolbar in the library window, click on import and backup, and then Import Bookmarks in HTML... "
However, I don't see anything that says "import and backup". I use Firefox 7.0.1 on Ubuntu/service Ocelot, recently updated.
Ubuntu 11. XX shows the window menus in the control bar at the top of the screen with the switch to the window of the Unit Manager.
Click bookmarks/view all bookmarks, and then move your mouse to the upper left corner to the Firefox Web browser.
You will get a pop up menu (Organization, views and import and backup).
-
How can I show all the results returned by a sql query?
Hi guys,.
I need your help.
Let's say I have a table: TableA. Fields in TableA are aleg, anon, monkeys. The following sentence can return, in general, several rows: select anon from TableA where aleg = somevalue. I would like to show the result of the anon column but no luck. If I try to display the results in a TextArea and the origin is a sql query shows that the first value of the line. I tried to see the like: display text (based in PLSQL) and a block anonymous plsql and coding
DECLARE
v_anon TableA.anon%TYPE;
CURSOR v_cur IS
Select anon from TableA where aleg = somevalue;
BEGIN
OPEN v_cur.
LOOP
SEEK v_cur INTO v_anon;
EXIT WHEN v_cur % NOTFOUND;
: FIELD_IN_FORM: = v_anon;
END LOOP;
CLOSE V_cur;
END;
but in this case, he showed no results.
So the first question is what type of field can I use to show the result. And the second is what can I do to be able to show all the results returned by the query (if more than one line).
concerningGMC
We are all happy that you found a solution, but you must sign your messages and change your ID forum. It is always good to know the real name of the person you are communicating with. In addition, if you plan to get answer to your questions in the future, you must mark responses as useful or correct if they helped you solve your problems.
Denes Kubicek
-------------------------------------------------------------------
http://deneskubicek.blogspot.com/
http://www.Opal-consulting.de/training
http://Apex.Oracle.com/pls/OTN/f?p=31517:1
------------------------------------------------------------------- -
Here's my question after tons of research and test without have the right solutions.
Target:
(1) I have a 12.1.0.2 database unique main enterprise 'testdb' as database instance running on the server "node1".
(2) I created physical standby database "stbydb" on the server "node2".
(3) DataGuard running on the mode of MaxAvailability (SYNC) with roll forward in real time 12 default c apply.
(4) primary database has 3 groups of one-man redo. (/oraredo/testdb/redo01.log redo02.log redo03.log)
(5) I've created 4 standby redo logfiles (/oraredo/testdb/stby01.log stby02.log stby03.log stby04.log)
(6) I do RMAN backup (database and archivelog) on the site of relief only.
(7) I want to use this backup for full restore of the database on the primary database.
He is a DR test to simulate the scenario that has lost every primary & Eve total servers.
Here is how to save, on the database pending:
(1) performance 'alter database recover managed standby database Cancel' to ensure that compatible data files
(2) RMAN > backup database;
(3) RMAN > backup archivelog all;
I got elements of backup and copied to primary db Server something like:
/Home/Oracle/backupset/o1_mf_nnndf_TAG20151002T133329_c0xq099p_.BKP (data files)
/Home/Oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.BKP (spfile & controlfile)
/Home/Oracle/backupset/o1_mf_annnn_TAG20151002T133357_c0xq15xf_.BKP (archivelogs)
So here's how to restore, on the main site:
I clean all the files (data files, controlfiles oder all gone).
(1) restore spfile from pfile
RMAN > startup nomount
RMAN > restore spfile from pfile ' / home/oracle/pfile.txt' to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';
(2) modify pfile to convert to db primary content. pFile shows below
*.audit_file_dest='/opt/Oracle/DB/admin/testdb/adump '
* .audit_trail = "db".
* full = '12.1.0.2.0'
*.control_files='/oradata/testdb/control01.ctl','/orafra/testdb/control02.ctl'
* .db_block_size = 8192
* .db_domain = "
*.db_file_name_convert='/testdb/','/testdb /'
* .db_name = "testdb".
* .db_recovery_file_dest ='/ orafra'
* .db_recovery_file_dest_size = 10737418240
* .db_unique_name = "testdb".
*.diagnostic_dest='/opt/Oracle/DB '
* .fal_server = "stbydb".
* .log_archive_config = 'dg_config = (testdb, stbydb)'
* .log_archive_dest_2 = "service = stbydb SYNC valid_for = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = stbydb'"
* .log_archive_dest_state_2 = 'ENABLE '.
*.log_file_name_convert='/testdb/','/testdb /'
* .memory_target = 1800 m
* .open_cursors = 300
* runoff = 300
* .remote_login_passwordfile = "EXCLUSIVE."
* .standby_file_management = "AUTO".
* .undo_tablespace = "UNDOTBS1.
(3) restart db with updated file pfile
SQLPLUS > create spfile from pfile='/home/oracle/pfile.txt'
SQLPLUS > the judgment
SQLPLUS > startup nomount
(4) restore controlfile
RMAN > restore primary controlfile to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';
RMAN > change the editing of the database
(5) all elements of backup catalog
RMAN > catalog starts by ' / home/oracle/backupset / '.
(6) restore and recover the database
RMAN > restore database;
RMAN > recover database until the SNA XXXXXX; (this YVERT is the maximum in archivelog backups that extends beyond the scn of the backup of the data file)
(7) open resetlogs
RMAN > alter database open resetlogs;
Everything seems perfect, except one of the file log roll forward pending is not generated
SQL > select * from v$ standby_log;
ERROR:
ORA-00308: cannot open archived log ' / oraredo/testdb/stby01.log'
ORA-27037: unable to get file status
Linux-x86_64 error: 2: no such file or directory
Additional information: 3
no selected line
I intended to use the same backup to restore primary basic & helps record traffic and the downtime between them in the world of real output.
So I have exactly the same steps (except STANDBY restore CONTROLFILE and not recover after database restore) to restore the database pending.
And I got the same missing log file.
The problem is:
(1) complete alert.log filled with this error, not the concern here
(2) now repeat it in real time apply won't work since the Party shall LGWR shows always "WAITING_FOR_LOG."
(3) I can't delete and re-create this log file
Then I tried several and found:
The missing standby logfile was still 'ACTIVE' at present RMAN backup was made.
For example, on db standby, under Group #4 (stby01.log) would be lost after the restoration.
SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;
GROUP # SEQUENCE # USED STATUS
---------- ---------- ---------- ----------
4 19 ACTIVE 133632
5 0 0 UNASSIGNED
6 0 0 not ASSIGNED
7 0 0 UNASSIGNED
So until I take the backup, I tried on the primary database:
SQL > alter system set log_archive_dest_state_2 = delay;
This was the Group of standby_log side Eve #4 was released:
SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;
GROUP # SEQUENCE # USED STATUS
---------- ---------- ---------- ----------
4 0 0 UNASSIGNED
5 0 0 UNASSIGNED
6 0 0 not ASSIGNED
7 0 0 UNASSIGNED
Then, the backup has been restored correctly without missing standby logfile.
However, to change this primary database means break DataGuard protection when you perform the backup. It's not accept on the production environment.
Finally, my real questions come:
(1) what I do may not do on parameter change?
(2) I know I can re-create the control file to redo before delete and then recreate after. Is there any simple/fast to avoid the standby logfile lost or recreate the lost one?
I understand that there are a number of ways to circumvent this. Something to keep a copy of the log file waiting restoration progress and copy up one missing, etc, etc...
And yes I always have done no real-time applies "to the aid of archived logfile" but is also not accept mode of protection of production.
I just want proof that the design (which is displayed in a few oracle doc Doc ID 602299.1 is one of those) that backs up data backup works effectively and can be used to restore the two site. And it may be without spending more time to resume backups or put the load on the primary database to create the database before.
Your idea is very much appreciated.
Thank you!
Hello
1--> when I take via RMAN backup, RMAN does not redo log (ORL or SRL) file, so we cannot expect ORLs or SRL would be restored.
2nd--> when we opened the ORL database should be deleted and created
3rd--> Expecting, SRL should not be an issue.we should be able to do away with the fall.
DR sys@cdb01 SQL > select THREAD #, SEQUENCE #, GROUP #, STATUS from v$ standby_log;
THREAD # SEQUENCE # GROUP # STATUS
---------- ---------- ---------- ----------
1 233 4 ACTIVE
1 238 5 ACTIVE
DR sys@cdb01 SQL > select * from v$ logfile;
GROUP # STATUS TYPE MEMBER IS_ CON_ID
---------- ------- ------- ------------------------------ --- ----------
3 /u03/cdb01/cdb01/redo03.log no. 0 online
/U03/cdb01/cdb01/redo02.log no. 0 2 online
1 /u03/cdb01/cdb01/redo01.log no. 0 online
4 /u03/cdb01/cdb01/stdredo01.log WATCH No. 0
/U03/cdb01/cdb01/stdredo02.log EVE 5 No. 0
DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log
method: cannot access the /u03/cdb01/cdb01/stdredo01.log: no such file or directory
DR sys@cdb01 SQL >! ls - ltr /u03/cdb01/cdb01/stdredo02.log
-rw - r-. 1 oracle oinstall 52429312 17 Oct 15:32 /u03/cdb01/cdb01/stdredo02.log
DR sys@cdb01 SQL > alter database force claire logfile 4;
change the database group claire logfile 4
*
ERROR on line 1:
ORA-01156: recovery or current flashback may need access to files
DR sys@cdb01 SQL > alter database recover managed standby database cancel;
Database altered.
DR sys@cdb01 SQL > change the database group claire logfile 4;
Database altered.
DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log
-rw - r-. 1 oracle oinstall 52429312 17 Oct 15:33 /u03/cdb01/cdb01/stdredo01.log
DR sys@cdb01 SQL >
If you do, you can recreate the controlfile without waiting for redo log entry...
If you still think it's something is not acceptable, you must have SR with support to analyze why he does not abandon SRL when controlfile_type is "underway".
Thank you
-
My safari bookmarks do not show all in the drop (time after transfer of Machine)
Hello!
Just had my hard drive replaced and made a time machine backup. After a tedious process to find all my favorites, because it was not automatic (using this thread: bookmarks to Safari from Time Machine backup), I realize that, even though I have them all and they appear when I select Bookmarks > show all bookmarks, that they don't all appear in the bookmarks drop down like it did? It is not that big of a deal in addition to convenience, but if there is a way to fix it I'd love to know!
Thanks in advance!
Oops! Lack of updating my Safari. Updated and now everything is back to normal
-
Request backup of SQL db vCenter
Hi all
I have separate the vCenter and its SQL on 2 VM.
I want to ask about the backup db SQL vCenter.
I know that the surest way to save the DB is stopped the vCenter first.
But I want to know, what happens if I don't stop the vCenter before saving the DB? It is safe in all?
I ask this question because I want to annex configuration for automatic backup of the DB of the vCenter.
Thank you in advance.
It depends on the backup method, generally with standard tools for backup, backup SQL DB its not required for vcenter clockwise rotation be down to take the backups.
What your vcenter DB backup plan? which tool you use to take backup of DB?
-
Hi all
11.2.0.1
AIX 6.1
We have 2 similar DB servers.
But when I do SHOW ALL ins RMAN have different configuration?
DB Server1:
RMAN > view all ;
using the control file of the target instead of recovery catalog database
Database with db_unique_name PROD RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO THE WINDOW OF RECOVERY OF 8 DAYS;
CONFIGURE BACKUP OPTIMIZATION # by default
SET UP DEFAULT DISK DEVICE TYPE; # by default
CONFIGURE CONTROLFILE AUTOBACKUP # by default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
CONFIGURE ENCRYPTION OF DATABASE # by default
CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / orauat/app/oracle/product/11.2.0/dbhome_1/dbs/snapcf_BNCTUAT.f'; # by default
DB Server2:
RMAN > view all ;
Database with db_unique_name PROD RMAN configuration parameters are:
CONFIGURE REDUNDANCY 1 RETENTION STRATEGY; # by default
CONFIGURE BACKUP OPTIMIZATION # by default
SET UP DEFAULT DISK DEVICE TYPE; # by default
CONFIGURE CONTROLFILE AUTOBACKUP # by default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
CONFIGURE ENCRYPTION OF DATABASE # by default
CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / oracle/app/oracle/product/11.2.0.3/dbhome_1/dbs/snapcf_batchsit.f'; # by default
How to replace one > CONFIGURE RETENTION POLICY to RECOVERY WINDOW OF 8 DAYS;
the default CONFIGURE RETENTION POLICY TO REDUNDANCY 1 and save the config?
Thank you very much
zxy
RMAN > set up clear retention policy;
-
Select SQL statement - See all the value of the range of month of entry
Hi all
I have a vision that is a union of other views
But the description of the view is as below
-current data in the viewdesc dashboard_monthly_view Name Null Type ------------------------------ ---- ------------ MONTHS VARCHAR2(17) NUM_DEPENDENT_IN_ASSESSMENT NUMBER NUM_REFERRED_AODTC NUMBER NUM_AT_DETERMINATION_HEARING NUMBER NUM_ACCEPTED NUMBER NUM_NOT_ACCEPTED NUMBER NUM_EXITED_SUCCESS NUMBER AVERAGE_DAY_TO_EXIST NUMBER NUM_EXITED_UNSUCCESS NUMBER AVERAGE_DAY_TO_EXIST_UNSUCCESS NUMBER COURT_NAME VARCHAR2(9)
-My select query isMONTHS NUM_DEPENDENT_IN_ASSESSMENT NUM_REFERRED_AODTC NUM_AT_DETERMINATION_HEARING NUM_ACCEPTED NUM_NOT_ACCEPTED NUM_EXITED_SUCCESS AVERAGE_DAY_TO_EXIST NUM_EXITED_UNSUCCESS AVERAGE_DAY_TO_EXIST_UNSUCCESS COURT_NAME ----------------- --------------------------- ---------------------- ---------------------------- ---------------------- ---------------------- ---------------------- ---------------------- ---------------------- ------------------------------ ---------- AUG 2012 1 0 0 0 0 0 0 0 0 AAA OCT 2012 8 1 3 1 1 1 44 1 4 AAA SEP 2012 2 0 2 2 0 0 0 0 0 AAA *UNDEFINED* 0 11 7 1 1 0 0 1 0 AAA NOV 2012 0 0 0 0 0 0 0 1 54 BBB OCT 2012 4 1 2 1 1 1 9 0 0 BBB SEP 2012 1 0 0 0 0 1 14 0 0 BBB *UNDEFINED* 0 5 4 1 0 0 0 1 0 BBB AUG 2012 1 0 0 0 0 0 0 0 0 COMBINED NOV 2012 0 0 0 0 0 0 0 1 54 COMBINED OCT 2012 12 2 5 2 2 2 26.5 1 4 COMBINED SEP 2012 3 0 2 2 0 1 14 0 0 COMBINED *UNDEFINED* 0 16 11 2 1 0 0 2 0 COMBINED 13 rows selected
- And the result isDEFINE startmonth = "Aug 2012"; DEFINE endmonth = "Nov 2012"; with all_months as ( select to_char(which_month, 'MON YYYY') month from (select add_months(to_date('&startmonth','MON YYYY'), rownum-1) which_month from all_objects where rownum <= months_between(to_date(NVL('&endmonth', '&startmonth'),'MON YYYY'), add_months(to_date('&startmonth','MON YYYY'), -1)) order by which_month ) ) select nvl(months, '**ALL**') AS "MONTHS", TO_DATE(MONTHS, 'MON YYYY') AS MONTH_SORT , sum(num_dependent_in_assessment) AS num_dependent_in_assessment , sum(num_referred_aodtc) AS num_referred_aodtc , sum(num_at_determination_hearing) as num_at_determination_hearing , sum(num_accepted) AS num_accepted , sum (num_not_accepted) AS num_not_accepted , sum(num_exited_success) as num_exited_success , sum(average_day_to_exist) as average_day_to_exist , sum(num_exited_unsuccess) as num_exited_unsuccess , sum (average_day_to_exist_unsuccess) as average_day_to_exist_unsuccess from DASHBOARD_MONTHLY_VIEW right outer join all_months on DASHBOARD_MONTHLY_VIEW.months = all_months.month --where months in (select month from all_months) and upper(court_name) like 'AAA' group by (months) order by month_sort
-The requirement of results I have to produce isMONTHS MONTH_SORT NUM_DEPENDENT_IN_ASSESSMENT NUM_REFERRED_AODTC NUM_AT_DETERMINATION_HEARING NUM_ACCEPTED NUM_NOT_ACCEPTED NUM_EXITED_SUCCESS AVERAGE_DAY_TO_EXIST NUM_EXITED_UNSUCCESS AVERAGE_DAY_TO_EXIST_UNSUCCESS ----------------- ------------------------- --------------------------- ---------------------- ---------------------------- ---------------------- ---------------------- ---------------------- ---------------------- ---------------------- ------------------------------ AUG 2012 01/08/12 1 0 0 0 0 0 0 0 0 SEP 2012 01/09/12 2 0 2 2 0 0 0 0 0 OCT 2012 01/10/12 8 1 3 1 1 1 44 1 4 **ALL**
On the tota (* EVERYTHING *) l, I tried to use the rollup but he total average too, which is not correct. I think the reason because he cannot read the form that was used to calculate the column.MONTHS MONTH_SORT NUM_DEPENDENT_IN_ASSESSMENT NUM_REFERRED_AODTC NUM_AT_DETERMINATION_HEARING NUM_ACCEPTED NUM_NOT_ACCEPTED NUM_EXITED_SUCCESS AVERAGE_DAY_TO_EXIST NUM_EXITED_UNSUCCESS AVERAGE_DAY_TO_EXIST_UNSUCCESS ----------------- ------------------------- --------------------------- ---------------------- ---------------------------- ---------------------- ---------------------- ---------------------- ---------------------- ---------------------- ------------------------------ AUG 2012 01/08/12 1 0 0 0 0 0 0 0 0 SEP 2012 01/09/12 2 0 2 2 0 0 0 0 0 OCT 2012 01/10/12 8 1 3 1 1 1 44 1 4 NOV 2012 01/11/12 0 0 0 0 0 0 0 0 0 **ALL**
How can I fix this, should I create, select another below one, with the sum of each column and the average for the other columns.
Also, the business analyst want to show all the months between the start and end of the month.
I used the right outer join, but apparently does not produce the right result.
If anyone of you have any ideas, please advise.
We use Oracle 11 g, it is a select statement for an Oracle APEX report.
The APEX version is 4.0.2. I'm a junior developer of the APEX and I still have to learn a lot about SQL Oracle analytic function.
Thank you very much in advance.
AnnHi, Ann.
Ann586341 wrote:
... I created a table to contain a simplified version of this viewThank you. It is much easier to work with.
... My query is
DEFINE startmonth = "Aug 2012"; DEFINE endmonth = "Nov 2012"; with all_months as ( select to_char(which_month, 'MON YYYY') month from (select add_months(to_date('&startmonth','MON YYYY'), rownum-1) which_month from all_objects where rownum <= months_between(to_date(NVL('&endmonth', '&startmonth'),'MON YYYY'), add_months(to_date('&startmonth','MON YYYY'), -1)) order by which_month ) ) , tbl_dashboard_active as ( select * from tbl_dashboard_monthly where months != '**UNDEFINED**' ) select tbl.months AS "MONTHS" --, TO_DATE(tbl.MONTHS, 'MON YYYY') AS MONTH_SORT , tbl.num_hearing , tbl.num_exited_success , tbl.avg_day_success_exist , tbl.num_exited_unsuccess , tbl.avg_day_unsuccess_exist from tbl_dashboard_active tbl right outer join all_months am on tbl.months = am.month and upper(tbl.court_name) like 'BBB' UNION ALL select 'ALL' AS "TOTAL" , SUM(tbl.num_hearing) , SUM(tbl.num_exited_success) , round(AVG(tbl.avg_day_success_exist),2) , SUM(tbl.num_exited_unsuccess) , round(AVG(tbl.avg_day_unsuccess_exist),2) --order by to_date(am.month,'MON YYYY') from tbl_dashboard_monthly tbl right outer join all_months am on tbl.months = am.month and upper(tbl.court_name) like 'BBB'
- And the result I got
MONTHS NUM_HEARING NUM_EXITED_SUCCESS AVG_DAY_SUCCESS_EXIST NUM_EXITED_UNSUCCESS AVG_DAY_UNSUCCESS_EXIST ----------------- ----------- ------------------ --------------------- -------------------- ----------------------- AUG 2012 1 0 0 0 0 OCT 2012 1 0 0 2 35 SEP 2012 1 0 0 0 0 ALL 3 0 0 2 11.67
I don't know why even I already filter all lines that the month is undefined, I still have a blank line in the result set.
This is the line for November. You do an outer join, in order to ensure that each value of am.month is displayed, even if it does not match what anyone in tbl. When it does not match anything, then all the columns tbl is supposed to provide will be NULL. You decide to view tbl. months, which is one of the following columns will be NULL. You should display mod. monmth instead.
But if I run for handset Court, I don't see this problem. The reason is that the Court combined have given for all four months?
When you say "on behalf of the combined Court", do you mean the unconditional "upper (tbl.court_name) as"BBB "?
If Yes, that would explain it.Also is it possible to list all the months between the start and end month assuring the user even if the statistics are 0.
Once again, in the case of lines that are present, even if they do not have the status of outer join, all of these columns will be NULL. Use NVL to map these nulls to 0.
and how to sort the month
GROUP OF two expressions, which depend on each other: one for sorting and the other for display.
For the sort expression, you can use months as a DATE. (It seems that you have tried this, but commented on the ORDER BY clause in your query is before the FROM clause.) The ORDER BY clause is always at the end of the query, after the FROM clause.)
Another expression of sorting is the number you used to generate the first month. That's what I used below.Here's a way to get the results you requested:
WITH got_months AS ( SELECT TO_DATE ('&startmonth', 'Mon YYYY') AS startmonth_dt , TO_DATE ( NVL ( '&endmonth' , '&startmonth' ) , 'Mon YYYY' ) AS endmonth_dt FROM dual ) , all_months AS ( SELECT rownum AS month_num , TO_CHAR ( ADD_MONTHS ( m.startmonth_dt , ROWNUM - 1 ) , 'MON YYYY' ) AS months FROM got_months m CROSS JOIN all_objects WHERE ROWNUM <= 1 + MONTHS_BETWEEN ( m.endmonth_dt , m.startmonth_dt ) ) SELECT NVL ( am.months , 'All' ) AS months , SUM (NVL (tbl.num_hearing, 0)) AS num_hearing , SUM (NVL (tbl.num_exited_success, 0)) AS num_exited_success , AVG (NVL (tbl.avg_day_success_exist, 0)) AS avg_day_success_exist , SUM (NVL (tbl.num_exited_unsuccess, 0)) AS num_exited_unsuccess , AVG (NVL (tbl.avg_day_unsuccess_exist, 0)) AS avg_day_unsuccess_exist FROM all_months am LEFT OUTER JOIN tbl_dashboard_monthly tbl ON am.months = tbl.months AND UPPER (tbl.court_name) = 'BBB' GROUP BY GROUPING SETS ( (am.month_num, am.months) , () ) ORDER BY am.month_num ;
Again, I used two GROUP BY expressions: one for sorting, the other for display. These depend on each other, that is, given one, you could derive from each other, and it is not sensible to dependent ROLLUP GROUP BY expressions like that, so I used GROUPING SETS ROLLUP instead, so it would be only 1 rank of great aggregate (in other words, 'all').
Output:
` AVG_ AVG_ NUM_ DAY_ NUM_ DAY_ NUM_ EXITED_ SUCCESS EXITED_ UNSUCCESS MONTHS HEARING SUCCESS _EXIST UNSUCCESS _EXIST --------- ------- ------- ---------- --------- ---------- AUG 2012 1 0 0 0 0 SEP 2012 1 0 0 0 0 OCT 2012 1 0 0 2 35 NOV 2012 0 0 0 0 0 All 3 0 0 2 8.75
-
Migration from SQL Server to Oracle database
I have 2 questions:
1. we intend to convert our sql server databases oracle OLTP databases. I tried to use SQL Developer to migrate a database of small sql server to oracle (size 5 GB) database. It was fine. When I tried to migrate to a different database (size 90G), it takes too much time. The problem with sql developer is I can not pick and choose tables. 250 paintings, I need to migrate tables abt 80 (the size will be abt 50 G). What is everyone can share their experiences, as appropriate, converting databases of size average sql server for oracle databases? other options?
2. I intend to convert the sql server ddl to oracle ddl. I have tested bcp out and use sql loader to import the data. Right now I am manually creating the oracle tables sql server tables. I use http://download.oracle.com/docs/cd/E11882_01/gateways.112/e12069/apa.htm#BABCIIDI to convert the code. Are there other ways better to convert sql DDL DDL Oracle Server?
Thanks in advanceDDLS must be converted manually. Oracle is not SQL-Server.
If for example, you have the option of partitioning, you should consider using the partitioning index and when it is possible. Not all tables must be hash tables. Do postpone you creation of segment or not? What type of tablespace? Set yourself free percentages and allows you to manage when the data block is on the free list and how much is reserved in the block of data to update rows in this block?
There are many considerations to be taken with regard to the physical database design.
Using BCP and SQL * Loader sound good. SQL * Loader is fast and scalable - use it to load up to 3.6 million lines every 60 seconds. Direct and parallel charges will give the best performance in this regard (assuming that the underlying table structure and use supports this approach).
-
by clicking on the bookmarks on the home page gives me my favorites
I have bookmarks under recently and unsorted bookmarks. I can move from these categories to the master list without problem.
When I click on show all bookmarks that I get none. He goes to this screen but shows no Favorites.
I would use these bookmarks on another computer, but also change in show all.second problem, my norton toolbar does not load and has not since worm 36
When you click View all bookmarks to launch the dialog box library, normally, you see three categories listed on the right side. If you double-click in any of the categories, you will find actual bookmark listed there or empty each category?
To transfer bookmarks in Firefox on another computer, there are two different file formats. I suggest to create two in case one does not work:
- "Backup" format: restore bookmarks from a backup or move them to another computer
- On the receiver Firefox, use Restore. He will wipe away all the existing bookmarks in Firefox receiver.
- Format 'Export': Export Firefox bookmarks to an HTML file for backup or transfer bookmarks
- On the receiver Firefox, use Import (import bookmarks in an HTML file). You usually have to reorganize a folder 'Imported bookmarks' (or the Unsorted Bookmarks category) at the desired locations.
Symantec is usually very quick with updates to date, but it might be a little early for 40 of Firefox (beta version). There is a release supporting 39 Firefox: https://community.norton.com/en/blogs.../firefox-39-support-norton-toolbar. Users report that you sometimes have to run LiveUpdate several times to get the last toolbar into Firefox.
If you had accidentally on the way to the beta and prefer to have the support of Norton toolbar in good time, you can install the retail version (39 Firefox) and it should work seamlessly with your existing settings.
It wouldn't hurt to do a backup first. You can find suggestions in this article: back up and restore the information contained in the profiles of Firefox.
Then do the restore:
Clean reinstall it
We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.
(1) download a fresh Installer for Firefox 39.0 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).
(2) close Firefox (if applicable).
(3) to rename the program folder, either:
(Windows 64-bit folder names)
C:\Program Files (x86)\Mozilla Firefox
TO
C:\Program Files (x86)\OldFirefox
(Windows 32-bit folder names)
C:\Program Files\Mozilla Firefox
TO
C:\Program Files\OldFirefox
(4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.
You can get to the Options page?
Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:
- \OldFirefox\Plugins
- \OldFirefox\browser\plugins
- "Backup" format: restore bookmarks from a backup or move them to another computer
-
Something went this afternoon and when I started Firefox all my favorites have disappeared. I reinstalled Firefox and recovered my favorites. My bar on the top of the browser's back, and when I click on the bookmark icon, it shows all my favorites. However, if I click on show all bookmarks (ctrl-shift-B), none of my favorites appear. I have attached a screenshot to show what I see, but it seems that there is a corruption somewhere.
It is possible that they are all in a folder or hidden?
I hope that these help solve, please if you make changes to make a backup of the profile as well: back up and restore the information contained in the profiles of Firefox
-
Can't access "Show all downloads" via the "library" Panel
Top of page where you can click to see the progress of your downloads, there is the option «Show all downloads»
When I click on 'Show all downloads', it shows me the 'library' with only one option. On the left hand side, I see the option named "all bookmarks". "However, has nothing else where he must also propose 'History,' Downloads ' and 'Tags' alongside"all bookmarks ". So, I can not access my downloads (of course, I can access my downloads through my account, but not what I am referring. I always prefer to verify via firefox, because it is much easier and faster).
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).
- Do NOT click on the reset button on the startup window Mode without failure.
- https://support.Mozilla.org/KB/safe+mode
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
You can check for problems with the database places.sqlite file in the Firefox profile folder.
-
Try to change the bookmarks in Firefox 9.0.1 these may not be the thing. It shows the empty windows when you click on "show all bookmarks".
One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.
-
All my favorites that are important are in folders and fines. But when I click the menu bookmarks, folders are followed by a list of unwanted bookmarks. These do not appear when I go to "show all bookmarks". Here, the "unsorted bookmarks" folder is empty.
I can delete the bookmarks side one at a time, but it will take ages!
Please can you advise me?
Thank you.Are not the Favorites in the Menu of bookmarks folder?
One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.
Maybe you are looking for
-
I made a scrapbook using Aperture, but Apple it will not print. What can I do?
Printing a photobook by Apple.
-
Windows 7 RTM fingerprint reader and webcam for TX2 driver status
I read somewhere on the site of HP windows 7 drivers for this TX2 - 1027CA won't be available until October 2009. Still I use it now, and the main system works well. There is a problem in the fingerprint reader and perhaps the webcam for me at this p
-
My iPhone 6 and safari does not work after update 9.3!
I did the iPhone update this morning 9.3 (13E233) and now my research of safari do not work. I can get, but then when I click on a result, nothing happens. Does anyone else have this problem and any suggestions to fix it?
-
Copying photos to the thumb drive
When you try to copy a JPEG from camera Droid Pro to a removable device get the message "the device attached to the system does not work. The two devices are connected and live
-
Can someone please reset my password XBOX LIVE please?
I got a new xbox today and I have forgetton my live password xbox, could someone please reset this?