Advanced sharing settings

Similar Questions

• Impossible to activate permanent "network discovery and file sharing" in advanced sharing without turning windows firewall at the wide service.

  Environment:

  I have a workgroup Windows 8 pro PC with all updates from Windows update. The PC is connected via WiFi (home) to a router (the same thing happens if I am connected to the router directly via RJ45). It's my "private network (NAT). I have the Windows Firewall is enabled in its default configuration. I use "Windows Defender" as my protection\firewall of virus software.  "When I go to: change options for sharing different network profiles" under advanced sharing options. I try to turn on file sharing and network discovery in the private profile. It shows that "the private sector is the current profile. The radio button lights. However, when I go to the file Explorer / network I got the message ' network discovery and file sharing are turned off. " The network computers and devices are not visible. Click here to change... " I click to change, however when I click to change it keeps returning and gives me the same message. I then go in ""network control and Internet\Network and sharing Center\Advanced sharing settings " and the option buttons in private profile for the network discovery and file sharing are turned off."

  If I turn off the Windows Firewall. Everything works. I need to open a hole in the windows firewall for 2 applications was discovered and network file sharing. I opened rather not just blindly ports. However, if this is the only solution, what ports do I need open.

  Hi all

  I have exactly the same problem.  (and I'm not the only one. - There are many!) The problem does not lie with the Windows Firewall. If I turn it off, discovery network and file sharing is turned on-tour he turn it back on and its all disabled subsequently and the rest of the way.  I've been round and round the forums of the world looking for a solution but still find a definitive answer. Can certain software engineering in Microsoft Please arrive at the correct answer.

  Thank you very much

  PT.

• Windows 7 I messed up my way in advanced systems settings > Environment Variables > Variables system. can't save point.

  Windows 7 - I messed up my way in advanced system settings > Environment Variables > System Variables. no known record point.  Can I restore the correct values without using Lenovo OneKey Recovery?

  You can start with a setting of the main path, but you have installed may well have added directories in the system path.

  It is at least that you start:

  Path=%SystemRoot%\System32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SystemRoot%\system32\WindowsPowerShell\v1.0\;

  To do this, you could add (if you use any Windows Live stuff)-

  C:\Program Files\Common Files\Microsoft Shared live; C:\Program Files (x 86) \Common Files\Microsoft Shared live; C:\Program Files (x 86) \Windows Live\Shared;

  Something else will depend on your particular system and facilities.

• OfficeJet 7610 large format: Advanced color settings

  Bought an Officejet 7610 wide format e-all-in-one more than 1 year ago.  Finally put in place.  Am I correct, that there is no advanced settings of color as my old Photosmart C6280 - brightness, saturation, hue, and settings for each color? Is this what current HP - Photosmart line?

  Hi @jyz2100,

  Although the advanced color settings may be different, there are options with software and print, dialog box that you can modify. I wonder if you might find the following useful information:

  The default sRGB mode

  The default sRGB color space is the most common configuration for print jobs. As mentioned, most of the images are sRGB and sRGB offers color high quality automatic without user intervention. When sRGB is selected, the driver controls the color management. Color management should not be attempted with ICC profiles, while the pilot is set to sRGB mode. This will lead to generally low color fidelity.

• Network discovery, file sharing settings keep changing by itself and Alltel to set the network location continues to ask the wireless device

  former title: network location settings. Discovery of NW. File sharing. public folder sharing. AVG 9.0 'tools' and network connections.

  My Alltel Wireless device again set the network location. And continues to change my network settings for the discovery of NW to:, as well as file sharing for: file public and sharing: read-only.  I have AVG Security 9.0 and under 'tools' and connections network shows several svchost with States reading service connections listening and unknown. I don't want no access to my computer and cannot find any computer consultants who can get this to stop. What can I do?

  Hello
   
  1. the options apply automatically on?
  2. have you made changes on the computer recently?
  3. have you installed any Alltel Wireless application to manage network connections?
  4. What is the current network location type on? Is it home, work or public?
  Network discovery and file sharing settings depend on the network location. For examle, if you set the network as a public location it turn on file sharing.  So I would ask you to turn all the parameters and then choose the type of network and check if the parameters change again.
  
  Method 1.
  I recommend you to check if the problem exists in clean boot. May be a third party application is causing these changes.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  Method 2.
  Also check the settings under tools in AVG security suite. You may need to check with the help of AVG on it.
  Or you can disable the antivirus software and check if that causes this behavior.
  Temporarily disable the security software installed on the computer and check if the problem persists.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Continuous shutdown computer rather than go to sleep even though I did change advanced power settings.

  Original title: sleep problem

  My computer continues to stop rather than go to sleep even though I did change advanced power settings.

  Hello

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Have what changes you made in the advanced power settings?

  Thank you for details on the issue.

  This problem may occur because of corrupted or incorrect power settings. This can also happen if drivers are not updated.

  I suggest you use the steps in this article and the Coachman.
  Reference:
  Windows 7 is not going to sleep
  https://support.Microsoft.com/en-us/KB/976877

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• OfficeJet Pro 8600: Advanced Document settings don't show option for printing without margins

  Hi people,

  I am trying to print a document created in Microsoft Word 2013 (Windows 8).

  I am also able to create a .pdf file for printing from Adobe Reader XI but have the same problem.

  The paper is 8.5 "x 11" (but in the landscape) and contains texts and photos.

  I want to print on HP Professional Laser Premium presentation paper (8.5 "x 11", glossy).

  I want to duplex print on both sides of the paper.

  I want to print without margins.

  I have a printer HP Officejet Pro 8600, which has the function of borderless in duplex printing (according to

  However, when I go to the 'Advanced Document Settings', I don't see the menu option for "borderless printing.

  I have the size set on "Letter" paper and paper type is set to "HP Brochure paper 180g glossy paper".

  The manual says that this printer supports 'Edge to edge letter' to the duplexer.

  My printer driver is not correct?

  I would be grateful for any help.

  Thank you

  -Dan

  Used the class Windows 8, download the full driver or HP basic driver.

  

• Windows 8 balanced food not reflecting options is not in the advanced power settings.

  When you set options diet in Windows 8 and he say not to go to sleep, etc. it will refresh all the power settings. Windows Mobile, 8 of my wife and now a Windows 8 office customer have both had the same problem where they'll be sleeping anyway. The resolution is to go to advanced power settings and expand your options until you find the settings are incorrect. So I wanted to just report that there is a bug with the Options of food not properly updated settings as they did in Windows 7.

  Hi JonGeorg,

  What happens when you create a new power plan? You can try to create a new power plan and check the results.

  This problem occurs because the settings that appear on the system settings page are from the registry for the preferred power plan settings.

  Changes that you make to the active power management do not affect the global on the system settings page settings, unless you are currently using the preferred power plan. Changes that you make on the system settings page apply to all power plans. These plans to be able to understand the active mode and custom plans that you created.

  Note By default, the preferred power plan is the plan balanced in Windows Vista and Windows 7.

  Refer to this article for more information.

  When you configure power options for the active power plan in Windows Vista or in Windows 7, the changes do not appear in the Power Options item in Control Panel

  http://support.Microsoft.com/kb/935799/en-us

  Hope this information helps.

• OfficeJet 6500 has more advanced Document settings

  I want a full explanation of ALL the options on the 'advance Document Settings' for this printer.

  There is no help.  The manual gives no explanation.  The choices are NOT intuitive and they interact strangely.

  Routine change color to black or gray scale requires 10 strokes and mouse clicks, because the system is designed.  I suggest that no competent supervisor approved this nightmare.

  I note that there is a way to change the use parameters and call them 'default' but no same way know what were the values by default when the device has been delivered.

  Experimenting with the settings is a slow process.  Even if it is true that some are obvious, there are 22 different possible selections in the Advanced Options dialog box.

  I note that in the FAQ there are several threads from users of the problems when you try to print with cartridges empty color installed.  I keep my color cartridges filled: I really want to use them.  I don't want to use when only black is fine.

  And I saw that you sell two different four colors of ink refill packages, a 'standard' and an 'XL' one to 2.5 times the black ink of 'Standard '.  The 'standard' black cartridge is the same size as the "XL" a greater than Cyan, Magenta and yellow ones, which means to use only black was originally planned.

  Which tells me that your company should we want to print in black only, but just "neglected" to tell how to use them.  -What is has been to maximize sales of ink?

  At the time, that I learned about computers, someone would have written an upgrade of the software and distributed to as many users that they could not reach.  You don't keep all our names, not you?

  Years, Bill Hewlett and Dave Packard were presented in a book, "in Search of Excellence".  This does not seem somethiing they would like as their company to be a part of.

  If I understand correctly, you personally don't perceive, without assistance, disable applications quickly and generate "Congratulations" who believes someone means that we like the way we are treated.  Tell your boss to support you if necessary and you will get the appreciation.

  But NOT this time.

  David K. Wheeler

• How can I access the Advanced Javascript settings?

  I am aware that, in recent versions of Firefox, the ability to disable Javascript has been deleted. I don't intend to reopen the discussion of that particular decision. But removing this option also removed access to the menu Javascript Advanced settings, which was much more useful than just disable Javascript itself. For example, although rarely, I have disabled Javascript entirely (other than at my own site of debugging), I disabled systematically the ability of Web sites to disable context menus or move and resize popup windows.

  Unlike turning off Javascript altogether, these are the settings that provide a positive benefit for the 'ordinary' (non-developer) users. If, say, I want to open a link in a new tab, then the correct way to do this is right-click on it. Sites which disable the right-click degrade the user experience and to allow a way to replace it is a good thing. What is the justification for removing the ability to disable Javascript entirely (and I don't understand, even if I don't agree with him), I see no reason to remove access to these advanced settings.

  So my question is, how do I re-enable javascript access produce settings? I don't see any obvious setting for her in: config and simply disable javascript entirely through this method is not what I want to do.

  I have a post that lists the three corresponding about: config preferences here: https://support.mozilla.org/en-US/questions/967108#answer-464407

• Windows Server 2008 - advanced sharing problems

  Hello

  I maintain a small server of Windows for a laboratory on a College campus, and we currently meet a few mistakes when you share a folder called 'students '. We use advanced permissions to share the folder with the name of 'students' shared network It worked for months, but now students are no longer able to access the folder. The permissions are correct, and by another action called "students2" (pointing to the same folder on the server with the same permissions), it worked. My question is, what would cause the inaccessible original share (show on the network, but deny access) to the groups of users who need access? Thank you for your time, I look forward to your responses.

  Gareth

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Failure of advanced/shared navigation of the actions to run when assigned by leaving. Why?

  After numerous tests, it seems that the bottom line is as described in topic - too far go that responsive projects. The question is not present for the empty projects I can say. I am running 8.0.1.242 on Windows 8 Captivate.

  Maybe I can work around this problem by writing in a JS event listener, but I see no other way to have trigger actions conditional navigation to specific times instead of via the interaction of the user - that is a user clicks on one of the 2 icons on slide 1 to view more details, taking to the slide where this detail is covered , after which they returned to slide 1, UNLESS they saw all the slides in detail, in which case they are sent to the end/next section slide.

  Is this a known bug? Is it still a bug? You can reproduce it? See nature projects reactive with advanced navigation actions attributed to work out very well for you? Any information would be appreciated, I would go to the bottom of this. I'd be happy to post more details if this case works for you - it looks like a bug here if so I prefer not to bother in the first place.

  Thank you!

  Hi Lieve,

  Thank you for your response. I saw your article mention - you have an great Google visibility when it comes to Captivate. It's a shame that you are one of the only good resources that - and Rod of course (I know you're out there too). It seems rather odd to me that always Captivate gets out with out-of-the-box features that do not work, and support is pretty limited. I can usually find a way around them, but it always adds a lot of time to my projects of debugging to find that the problem is of Captivate and not mine... not ideal. Makes me wonder if Adobe requires releases annual no matter where is their Cp dev team.

  In this case, the same on the output function that failed in my responsive project worked when assigned in the same way in a project of standard and white - at least in this one case alone is not a general question "exit does not work as I want to." I'm not trying to run everything must happen ON the slide came out, I just need to run - at some point. I determined that all sorts of actions work in my project for leaving: I can increment variable, show and hide objects, etc., etc. - the only thing falling down (and it will fail 100% of the time for me in reactive projects) use navigation in the context of shared or advanced actions, if go to slide and other slides at base of navigation , or GotoFrameAndResume or another framework based "micronavigation" (thank you for giving me the initial end on this point, moreover - it has served me well).

  Unfortunately, I could not add the action for my enter on to the slide later, as in my case, I need to my function leaving kicker users back to the beginning or to the slide at the end of the project, so if to sign they would ever get see the content of the slide. I end up doing something similar: adding brief slides 'redirect' between my content slides, that have the same feature set to enter. Looks like a stupid work-around for me, but my JS solutions were not well behave and I got tired of debugging.

  If you want to, I would be grateful if you could check if it seems like a bug you as well and maybe even if it persists in Captivate 9 (I recall that have this you). I still get nagging that I'm something I just straight up found no clearing of doubts, although this one seems, as it has nothing to do with me. Thanks again.

• Model box Live-missing text in the advanced composition settings.

  Hello

  There is no check box in the advanced settings for the Live-text models. I work CC v12.2.1.5.

  BR

  Incorrect version. You need AE CC 2014. install it.

  Mylenium

• File sharing settings

  I recently updated two of my Macs to El Capitan, and simply check the box under system preferences/sharing file sharing, I can share files between two Macs - wonderful back.

  However, I have an old Mac 10.5.8 Leopard who won't get upgrades and I can't seem to access its files from the new Macs. When I turn the sharing files in Leopard unit, that I can see it in the Finder under shared on the new Macs, however I can't connect from a unit - nothing happens when I click on "connect as" in the Finder. Now in the old unit I can access files on the part of the new units, but not the reverse.

  The good thing about El Capitan is that there is nothing to put under the menu sharing in system preferences. However the older Leopard unit, I 'Options' where I can select AFP, FTP and SMB sharing. I tried turning them on and in various combinations, but I can not just connected to the El Capitan units leopard machine.

  Any suggestions?

  Here's a hint, I restarted the old Mac and from the Finder when I double click on the old Mac from the side bar under shared I get this in a pop-up window:

  Cannot open "Of Tom Kiefer MacBook" because the original item cannot be found.

  The only option is to click OK.

• Articles in 'Tools' > Options/advanced/network/settings tab are grayed out. I'm trying to clear cache. may also have Firefox do this automatically, but cannot get there. Why the menu options are grayed out?

  Firefox 3.6.17

  (1) you may need to click the background box ("use of manual settings") to activate the manual configuration of the proxy.

  (2) see How to clear Firefox cache.