ADVAPI32.dll dynamic link library

Similar Questions

• error AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library

  I tried to update my iTunes this weekend.  Now, I can't open it I get this error: AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library is on a Windows 7 computer.  I tried to re - install outside of iTunes and repair.  But no luck.  Should I uninstall iTune and then re-install?  Help.

  These errors can usually be fixed by removing the offending dll, then fix the component it is programs and features Control Panel. AVFoundationCF.dll belongs to Apple Application Support and are normally in

  • C:\Program Files\Fichiers Files\Apple\Apple Application Support or
  • C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  where the name of the Program Files folder may vary depending on the region.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, must revert to a previous version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• I_RpcBindingIsServerLocal is not found in the RPCRT4.dll dynamic link library

  Windows 2003 64-bit, the server crashed after installation of windows update and keep restarting with blue screen stating 'Procedure entry point not found I_RpcBindingIsServerLocal in the RPCRT4.dll dynamic link library' there is no way to access Windows in safe mode or in any other way tried to use last know good configuration, safe mode. The only way is to access Windows Recovery Console in which we tried to repair and run the chkdisk but unfror. with no luck.

  How can we overcome this problem without upgrading them to 2008!

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• "Setup error!... LiteHtml.dll dynamic link library.

  Can someone please help with this error massage that appears after trying to install the Autodesk software from a USB... "the product entry point? "SetComboBoxLocAndDropDownHeight@CtrUtil@@TAHAAV?$CComboBoxT@VCWindow@ATL@@@WTL@@IHH@Z found in the LiteHtml.dll dynamic link library.

  Hello
  the error is said he cannot find dll files needed, where they are supposed to be... This was previously on a network?
  Try this link:
  http://USA.Autodesk.com/ADSK/servlet/index?ID=7460177&siteid=123112
  b Eddie

• Error "the procedure entry point SMapLS_IP_EBP_12 be found in KERNEL32.dll dynamic link library" when you try to play Red Alert: Command & Conquer

  Original title: the procedure entry point SMapLS_IP_EBP_12 could not be found in KERNEL32.dll dynamic link library.

  Ive been trying to install Red Alert: Command and Conquer on my new pc windows 7 and of course he will not play to come with all can't play because its running windows 6.1 and it's a single program of windows 95. then I went through all troubleshooting and change everything to make sure that it works and it actually installed, but when I went to play this message appears and im like why does this happen to me!

  The procedure entry point SMapLS_IP_EBP_12 be found in KERNEL32.dll dynamic link library.

  It of the message, can someone help me?

  Hi BigAl3000,

  Please note that Command & Conquer: Red Alert 3 is the only version compatible with Windows 7.

  Red Alert 2 and red alert are not compatible with Windows 7.

  See Windows 7 compatibility for Command & Conquer: Red Alert for more information.

  To troubleshoot program compatibility issues in Windows 7, try the following methods:

   

  Method 1: Open the program compatibility problems

   

  Most programs written for Windows Vista are also running Windows 7, but some older programs might run poorly or not at all. If an older program does not work, use the program compatibility issues to simulate the behavior of earlier versions of Windows.

  Method 2: Contact the program vendor or the hardware manufacturer

   

  Contact the program vendor for advice on how to solve the problem. In general, the software vendor's Web site provides a support section that you can use, for example, to search for an error message that you receive from the program.

  Hope this information helps.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• the procedure entry point GetFinalPathNameByHandleW could not be found in KERNEL32.dll dynamic link library

  Hello

  While trying to install a program, I see the following on the screen error message:

  The procedure entry point GetFinalPathNameByHandleW could not be found in KERNEL32.dll dynamic link library

  The I set him, is a Windows XP 32-bit environment.

  The I am installing, is a program, created by my own company, using a 32-bit self-extracting installer, which is also created by my own business using InstallAnywhere Flexera software.

  No changes were made on the environment of the installers.

  No change seems is done on the environment for creating installation programs (where the self-extracting installer is created): I checked the monitor of reliability/Action Center / Control Panel and no entries are present between a job and an installer without work.

  The file 'KERNEL32.dll' is mentioned in the error message, I checked his date of change, which is 11/30/2012, this should not be the cause of the problem either.

  Witnin the self-extracting installation program, a few changes were found, those who are considered at the moment, but there is no indication or not those who are causing the error message I see here.

  Does anyone have an idea what may cause the error message mentioned and how to cope?

  Thank you

  Dominique

  These types of error messages mean that the program is looking "inside" the file specified (in this case kernel32.dll) try to find a function/procedure to run called "GetFinalPathNameByHandleW" and find do not.

  The program calls the non-existent function badly or the library file is not in there.  Things do not match somewhere.

  A DLL is a library of dynamic links and files as kernel32.dll are sometimes just a bunch of procedures/functions/subroutines and all located in a single, portable file.

  In a primitive way, you can use a text editor to open the kernel32.dll file (make a copy if it your desire) and search for a string "GetFinalPathNameByHandleW" and you will not find.

  You can even search for "GetFinal", and you won't find it in the XP kernel32.dll file:

  

  But if you do the same thing on a Windows 7 + kernel32.dll you 'll find:

  

  If your program calls a function inside a DLL, but this feature does not exist in the Windows XP's kernel32.dll file.

  I think that GetFinalPathNameByHandleW was introduced in Windows Vista, so now here you would be fine.

  If who wrote your program is that it works on XP, they need to stick to the functions that are part of XP and GetFinalPathNameByHandleW isn't here, where the error.

• 'The procedure entry point DecodePointer could not be found in KERNEL32.dll dynamic link library '.

  ORIGINAL TITLE: How can I fix this please?

  I have an older version of Windows XP (Home edition) Version 5.1.  Trying to get updated with service packs, etc., I get the pop up message in the box below.  How can I fix the problem?

  'The procedure entry point DecodePointer could not be found in KERNEL32.dll dynamic link library '.

  Thank you for your help.

  The other post:

  We get an error "iexplore.exe - point of entry not found in KERNEL32.dll dynamic link library" so he was trying to use internet explore.

  In Firefox, I have automatic updates verified, but for some reason any I do not receive them.  I need all the service packs for Microsoft.

  When I try to use Internet Explorer to connect to the internet, I get a message that says "iexplore.exe - point of entry not found in KERNEL32.dll dynamic link library" How can I fix?  I get a lot of error messages related to the KERNEL32.dll dynamic link library.

  In addition, for some unknown reason, I lost my software of Microsoft - Word, Excel, etc.  I don't have the disc to recharge.

  Thanks for any help.  This kind of thing is frustrating and I really appreciate the availability of Microsoft Answers for assistance.

  Additional post:

  Im trying to update my computer with SP2 and Windows 7.  Even when I try to use I Tunes and do other things that I receive and message entry point (they vary).

  Here are a couple:
  1. the procedure for DecodePointer entry point could not be located in the line of the dynamic library KERNEL32.dll.

  2. the procedure entry point SHRRegGetValueW be found in the library of dynamic links SHLWAPI.dll.

  I have an old computer. Compaq Windows XP - Home Edition, 5.1.

  A month ago I lost my Microsoft Office software. Word and excel... it was all gone.   I have to reload the diskettes of origin provided with this computer which is about 7 years old.

  Is this thing?  I CAN go on the internet and move OK, but I can't download updates, or I Tunes or much else.

  * Original title: do not get the automatic updates.

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Tom Ferguson

• The procedure entry point PowerEnumerate be found in the POWPROF.dll dynamic link library.

  When I develop a way of debugging the program. The procedure entry point PowerEnumerate be found in the POWPROF.dll dynamic link library.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

• procedure entry point SetD | DirectoryW is not found in the KERNEL32.dll dynamic link library

  original title: procedure entry point SetD | DirectoryW

  is not found in the KERNEL32.dll dynamic link library

  Hello mxlpick,

  When you receive this error message?  How long have you encountered this message?  Here is a link that I hope will help solve this problem.  Please let us know status.

  Microsoft KB:

  http://support.Microsoft.com/kb/142606

  Thank you

• What the devil? Error: The procedure entry point? detac3@ListData@@QAEPAUData@1@XZ couldnot be found in QtCore4.dll dynamic link library.

  I hope I'm in the good topic section. My computer feezes. I restart or turn off & that is what happens.                                                                                       Error: The procedure entry point?  detac3@listData@@QAEPAUData@1@XZ not found in the QtCore4.dll dynamic link library.                                      He also does this whenever I turn on my computer, even if it does not freeze. I was told that I have to use my CD to get into windows XP, but I have no idea where I put it. What now? Oh, I'm computer illiterate, so stupid it upwards!

  Hi Budge3263,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  QtCore4.dll is part of the development environment for a number of applications, including Photoshop Elements.

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• 325 ordinal is not found in the AHDOCVW.dll dynamic link library

  I have a school program that doesn't work with IE8. He suggested in school support uninstall IE8, I did. Now, I get an error 'The Ordinal 325' not found in SHDOCVW.dll dynamic link library message every time I try to do anything. Boy did I mess up. Is it possible to reinstall IE8 or does anyone have any other suggestions as to what I should try?

  Hello.
  This discussion suggests running regsvr32 /i shdocvw.dll
  http://social.answers.Microsoft.com/forums/fi-fi/InternetExplorer/thread/1a43d725-AD6C-4713-a723-daddb11189bf
  Here is another discussion on this issue: http://www.annoyances.org/exec/forum/winxp/t1101578221

  To be honest though, you might want to try to re - install IE8 first. It back to the last known good state.

• 'The procedure entry point OpenVxDHandle could not be found in KERNEL32.dll dynamic link library '.

  'The procedure entry point OpenVxDHandle could not be found in KERNEL32.dll dynamic link library '.

  My computer was working fine, now I get this message & no matter what I try, I can't seem to solve the problem.
  If anyone knows how to fix this help please?

  Hello

  1. Once you get this error message? This error occurs when you run a specific program or out of order?
  
  2. What are the steps you tried to solve the problem?
  
  3. have you installed a recent hardware or software before the show?
   
  4. are you able to start the computer on the desk?
   
   
  Method 1:
  
  Step 1: Safe mode
  
  Start your computer in safe mode and check the number.
  
  To start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  
  Step 2: start Clean
  
  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.
  Method 2:
  
  Perform a SFC scan on your computer. Consult the following link:
  
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
   
  
  It will be useful.

• When you try to open a PDF from Adobe, I get this message "to the 882 ordinal not found in SHELL32.dll dynamic link library.

  When you try to open a PDF from Adobe, I get this message "to the 882 ordinal not found in SHELL32.dll dynamic link library.  Any ideas on how to solve this problem.  Have Windows Vista.  Thank you.

  original title: problem opening Adobe pdf.

  Hi Gary,.

  Are you facing this issue only when you open pdf files?

  Method 1:

  You can try uninstalling and reinstalling Adobe software and check if it helps.

  Uninstall a program

  Method 2:

  You also try to run the system restore.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following links:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• Twister.exe point not found the procedure entry point LeaveCriINDX (not found in KERNEL32.dll dynamic link library

  Original title: Entry Point not found error with a game

  My game (Nancy Drew: trail of the Twister) has malfunctioned or something. It worked fine for a while, but now I get this error when I try to start the game (twister.exe point not found the procedure entry point LeaveCriINDX (not found in KERNEL32.dll dynamic link library) none of using the solutions of HERInteractive.) My OS is Vista. Help, please!

  Hello

   
  I would like to inform that the error, the entry point not found:

  This error could be related if there are some missing files to initialize the game. I suggest that you uninstall and reinstall the game and check if you have the same problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Also check if the minimum requirement of games is the specification of your computer.

• The procedure entry point ucrtbase.terminate could not be found in the api-ms-win-crt-runtime-l1-1-0.dll dynamic link library

  Running Windows 7 Home premium

  Hi I get this error when I try to add or remove windows features. Before I even tried to change anything, I get this error when I try to access point to add or remove windows features. I just reinstall windows then perhaps it's to do with it?

  ERROR

  The procedure entry point ucrtbase.terminate could not be found in the api-ms-win-crt-runtime-l1-1-0.dll dynamic link library

  If anyone knows what this means or what I have to do to get rid of the error, any help would be accepted with gratitude.

  Best regards Steve

  Hi, I have now discovered what the problem was. It wasn't Office exactly. Rather have just reinstalled windows 7, windows update did not work properly. Virtually no updates had been installed. I had to run the "windows update diagnostic" program from Microsoft support. Once that had solved the problem of update on 180 updates have been installed. Once they have been installed the problem with the error has been resolved. I do not know what update fixed but one of them did.

  Best regards Steve