I_RpcBindingIsServerLocal is not found in the RPCRT4.dll dynamic link library

Similar Questions

• error AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library

  I tried to update my iTunes this weekend.  Now, I can't open it I get this error: AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library is on a Windows 7 computer.  I tried to re - install outside of iTunes and repair.  But no luck.  Should I uninstall iTune and then re-install?  Help.

  These errors can usually be fixed by removing the offending dll, then fix the component it is programs and features Control Panel. AVFoundationCF.dll belongs to Apple Application Support and are normally in

  • C:\Program Files\Fichiers Files\Apple\Apple Application Support or
  • C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  where the name of the Program Files folder may vary depending on the region.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, must revert to a previous version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• procedure entry point SetD | DirectoryW is not found in the KERNEL32.dll dynamic link library

  original title: procedure entry point SetD | DirectoryW

  is not found in the KERNEL32.dll dynamic link library

  Hello mxlpick,

  When you receive this error message?  How long have you encountered this message?  Here is a link that I hope will help solve this problem.  Please let us know status.

  Microsoft KB:

  http://support.Microsoft.com/kb/142606

  Thank you

• The procedure entry point RegOpenKeyExW is not found in the Kernel32.dll dynamic link library

  Hello

  I created an application using visual studio 2008 in windows 7... that I created the application setup. I installed the windows xp Setup program... Application does not work on windows xp... its messagebox popup.
  Message is-> the procedure entry point RegOpenKeyExW is not found in the Kernel32.dll dynamic link library.
  Kindly give an orientation to clear the problem. Thanks in advance.

  Hi Ambikaksm,

  The question you posted would be better suited in the MSDN Forums; We recommend that you post your question in the MSDN Forums to get help:

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Keep us updated on the status of the issue.

• 325 ordinal is not found in the AHDOCVW.dll dynamic link library

  I have a school program that doesn't work with IE8. He suggested in school support uninstall IE8, I did. Now, I get an error 'The Ordinal 325' not found in SHDOCVW.dll dynamic link library message every time I try to do anything. Boy did I mess up. Is it possible to reinstall IE8 or does anyone have any other suggestions as to what I should try?

  Hello.
  This discussion suggests running regsvr32 /i shdocvw.dll
  http://social.answers.Microsoft.com/forums/fi-fi/InternetExplorer/thread/1a43d725-AD6C-4713-a723-daddb11189bf
  Here is another discussion on this issue: http://www.annoyances.org/exec/forum/winxp/t1101578221

  To be honest though, you might want to try to re - install IE8 first. It back to the last known good state.

• W2K & Flash install - SetDllDirectoryW is not found in the KERNEL32.dll dynamic link library.

  fully patched W2000 SP4 - try to install or update flash adobe gives "the procedure point SetDllDirectoryW entry is not found in the dynamic library KERNEL32.dll." said ths for both FF and IE versions of the flash Installer... it just started recently... at least since the beginning of 2012... mcafee or norton stuff has never been near this box... This is (vascular) limited to install or update flash...

  NOTE: had to choose ' Other/unknown' for windows option version in these forums, because some spark deletion of the option "Windows 2000":? :(

  I'll just post a link to workarounds to the case where someone else wants:

  http://forums.Adobe.com/thread/965334

  Because Windows 2000 is out of support and has had no updates Microsoft security since July 2010, I'm puzzled why people are so concerned about having a Flash Player update. The exploits are likely to be totally confused.

• Download this message when I try to run Lightroom. Point procedure entry AgTransitCargo_pushTransitCargo could not be found in the AgKernel.dll dynamic link library - system: windows 7 64 bit is no error in the log file

  Download this message when I try to run Lightroom. The procedure entry point AgTransitCargo_pushTransitCargo could not be found in the AgKernel.dll dynamic link library

  system: windows 7 64-bit

  There is no error in the log file.

  no error in scannow at the command prompt.

  

  Hi Michela,

  Lightroom makes a call the the AGkernel.dll file, but the file isn't sure what to do because it can't find the line of code within himself to answer. This can happen for several reasons, that fall within these two broad categories: AGkernel.dll is damaged and must be repaired or AGKernel.dll version is incorrect and should be updated to the correct version.

  Here are some things you can do to fix the file:

  -Record again with Windows AGKernel.dll: https://support.microsoft.com/en-us/kb/249873

  -Windows repair: https://support.microsoft.com/en-us/kb/929833

  -Install all the updates that are available for Windows: Windows Installer updates

  -Uninstall and reinstall Lightroom

  Kind regards

  Tanuj

• The procedure entry point PowerEnumerate be found in the POWPROF.dll dynamic link library.

  When I develop a way of debugging the program. The procedure entry point PowerEnumerate be found in the POWPROF.dll dynamic link library.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

• WordPress the procedure entry point currentprocessEplicicitAppUerModelID, Cauld not found Set in SHELL32.dll dynamic link library

  Hello again people

  I am again asking for help. I installed WordPress and when I try to open it I get the following message is displayed.

  {The procedure entry point currentprocessEplicicitAppUerModelID Set

  Cauld not found in dynamic link SHELL32.dll library.  }

  Why I get this as it seems that my windows program is more corrupt or missing actually a pc of important software I use vista

  Try the WordPress support forum.

• iTunes.exe - Entry Point kFigFormatReaderLoaderParameter_ChapterCount could not be found in the MediaToolbox.dll dynamic link library

  After you download iTunes on my Dell PC with Windows 7 the message on my title box apper when click the iTune icon.

  May - https://discussions.apple.com/thread/3123175?start=0&tstart=0

  Its a bit old, but seems the same basic problem. NOTE: it does not mention using ccleaner to fix the registry. Personally, I'm uncomfortable to do stuff like that, so maybe try without this step first, or do a full backup of your PC "such what" before you start or request for confirmation on the Apple site.

  It may be useful

• Launch of Lightroom 6 is not. error: "can't find the access point of the procedure _crtCreateSymbolicLinkW in the MSVCR110.dll dynamic link library.

  It says: "cannot find the access point of the procedure _crtCreateSymbolicLinkW in the MSVCR110.dll dynamic link library. What can I do? I have already uninstall and then reinstall the software...

  It is indeed a microsoft problem, check here:error "did not find the entry point _crtCreateSymbolicLinkW - Microsoft Community .

• What the devil? Error: The procedure entry point? detac3@ListData@@QAEPAUData@1@XZ couldnot be found in QtCore4.dll dynamic link library.

  I hope I'm in the good topic section. My computer feezes. I restart or turn off & that is what happens.                                                                                       Error: The procedure entry point?  detac3@listData@@QAEPAUData@1@XZ not found in the QtCore4.dll dynamic link library.                                      He also does this whenever I turn on my computer, even if it does not freeze. I was told that I have to use my CD to get into windows XP, but I have no idea where I put it. What now? Oh, I'm computer illiterate, so stupid it upwards!

  Hi Budge3263,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  QtCore4.dll is part of the development environment for a number of applications, including Photoshop Elements.

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• "Setup error!... LiteHtml.dll dynamic link library.

  Can someone please help with this error massage that appears after trying to install the Autodesk software from a USB... "the product entry point? "SetComboBoxLocAndDropDownHeight@CtrUtil@@TAHAAV?$CComboBoxT@VCWindow@ATL@@@WTL@@IHH@Z found in the LiteHtml.dll dynamic link library.

  Hello
  the error is said he cannot find dll files needed, where they are supposed to be... This was previously on a network?
  Try this link:
  http://USA.Autodesk.com/ADSK/servlet/index?ID=7460177&siteid=123112
  b Eddie

• 'The procedure entry point DecodePointer could not be found in KERNEL32.dll dynamic link library '.

  ORIGINAL TITLE: How can I fix this please?

  I have an older version of Windows XP (Home edition) Version 5.1.  Trying to get updated with service packs, etc., I get the pop up message in the box below.  How can I fix the problem?

  'The procedure entry point DecodePointer could not be found in KERNEL32.dll dynamic link library '.

  Thank you for your help.

  The other post:

  We get an error "iexplore.exe - point of entry not found in KERNEL32.dll dynamic link library" so he was trying to use internet explore.

  In Firefox, I have automatic updates verified, but for some reason any I do not receive them.  I need all the service packs for Microsoft.

  When I try to use Internet Explorer to connect to the internet, I get a message that says "iexplore.exe - point of entry not found in KERNEL32.dll dynamic link library" How can I fix?  I get a lot of error messages related to the KERNEL32.dll dynamic link library.

  In addition, for some unknown reason, I lost my software of Microsoft - Word, Excel, etc.  I don't have the disc to recharge.

  Thanks for any help.  This kind of thing is frustrating and I really appreciate the availability of Microsoft Answers for assistance.

  Additional post:

  Im trying to update my computer with SP2 and Windows 7.  Even when I try to use I Tunes and do other things that I receive and message entry point (they vary).

  Here are a couple:
  1. the procedure for DecodePointer entry point could not be located in the line of the dynamic library KERNEL32.dll.

  2. the procedure entry point SHRRegGetValueW be found in the library of dynamic links SHLWAPI.dll.

  I have an old computer. Compaq Windows XP - Home Edition, 5.1.

  A month ago I lost my Microsoft Office software. Word and excel... it was all gone.   I have to reload the diskettes of origin provided with this computer which is about 7 years old.

  Is this thing?  I CAN go on the internet and move OK, but I can't download updates, or I Tunes or much else.

  * Original title: do not get the automatic updates.

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Tom Ferguson

• the procedure entry point GetFinalPathNameByHandleW could not be found in KERNEL32.dll dynamic link library

  Hello

  While trying to install a program, I see the following on the screen error message:

  The procedure entry point GetFinalPathNameByHandleW could not be found in KERNEL32.dll dynamic link library

  The I set him, is a Windows XP 32-bit environment.

  The I am installing, is a program, created by my own company, using a 32-bit self-extracting installer, which is also created by my own business using InstallAnywhere Flexera software.

  No changes were made on the environment of the installers.

  No change seems is done on the environment for creating installation programs (where the self-extracting installer is created): I checked the monitor of reliability/Action Center / Control Panel and no entries are present between a job and an installer without work.

  The file 'KERNEL32.dll' is mentioned in the error message, I checked his date of change, which is 11/30/2012, this should not be the cause of the problem either.

  Witnin the self-extracting installation program, a few changes were found, those who are considered at the moment, but there is no indication or not those who are causing the error message I see here.

  Does anyone have an idea what may cause the error message mentioned and how to cope?

  Thank you

  Dominique

  These types of error messages mean that the program is looking "inside" the file specified (in this case kernel32.dll) try to find a function/procedure to run called "GetFinalPathNameByHandleW" and find do not.

  The program calls the non-existent function badly or the library file is not in there.  Things do not match somewhere.

  A DLL is a library of dynamic links and files as kernel32.dll are sometimes just a bunch of procedures/functions/subroutines and all located in a single, portable file.

  In a primitive way, you can use a text editor to open the kernel32.dll file (make a copy if it your desire) and search for a string "GetFinalPathNameByHandleW" and you will not find.

  You can even search for "GetFinal", and you won't find it in the XP kernel32.dll file:

  

  But if you do the same thing on a Windows 7 + kernel32.dll you 'll find:

  

  If your program calls a function inside a DLL, but this feature does not exist in the Windows XP's kernel32.dll file.

  I think that GetFinalPathNameByHandleW was introduced in Windows Vista, so now here you would be fine.

  If who wrote your program is that it works on XP, they need to stick to the functions that are part of XP and GetFinalPathNameByHandleW isn't here, where the error.