Advice needed on the installation of an operating system for my laptop

Similar Questions

• HP Compaq 6300 small form: deliver the installation of an operating system for HP Compaq Small Form Factor 6300

  I have a HP Compaq 6300 Small Form Factor in which I just replaced the motherboad. It works very well. I can start on a USB bootable and (1) start a Windows 8 or a clean installation of Windows 10. I can (2). boot from a USB drive capable of Linux Mint 17.3 Startup and load that OS fine. When I try the installation of any of the aforementioned OSs (Windows 8/10-Linux Mint 17) they all will get an error of memory or hard drive and the installation at the beginning of the installation to fail. I tried this on two SSD drives and two HDs standard. I am at a loss on what to try next. Any help would be great. Thank you. -Matt

  I have it. It was a bad memory stick.

• How can I get the operating systems for 5 laptops that had removed the hard drives? Do I have to buy the newest Windows operating system?

  Original title: do I have to buy new systems of microcsoft

  I recently purchased 5 computers of portable hard drives had been removed from some of them have the stickers from microsoft on them that I have to buy new systems of microcsoft or can I get a copy of operating systems because they are already paid by gsa

  Contact the manufacturer of the laptop computer and ask for help.

• Problem with the installation of an operating system

  Hi, Gays

  I have hp dv6 7000 with 1 TB drive HARD Toshiba with 32 GB SSD as cache accererator. I tried to install windows 8, but I have trouble finding the drive in to choose in which partition should be installed. Have you had anyone a problem like that?

  I think I need a driver for it but I couldn't find anywhere, I samo conversations with people from hp Support, but without any result.

  Can someone help me?

  You must > driver Intel SATA. Extract the files to a folder using 7Zip or another utility. Copy the "Drivers" folder on a USB key. Boot with your dvd of Windows 8 and when you get to the stage where it must choose where you want to install Plug the USB (preferably in a USB 2.0 port, but I believe that Windows 8 has native support for USB 3.0 too) and load the driver from the folder.

• I have a laptop broke the rocovery disk not good ahy, I need the windows vista disk operating system how do I get the same themes?

  I have a laptop broke the rocovery disk not good ahy, I need the windows vista disk operating system how do I get the same themes?

  If Windows Vista was preinstalled on your computer, contact the manufacturer of your computer for a replacement CD. If you purchased a retail version of Windows Vista, contact Microsoft.

  This article in the Microsoft Knowledge Base has the details: How to replace Microsoft software or hardware, order service packs and updates of product and replace product manuals . Boulder computer Maven
  Most Microsoft Valuable Professional

• The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490).

  The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490). I tried in several ways through the links suggested to solve the problem and nothing has worked.

  
  

  I turned to the forums and I saw that many, many people have the same problem with Vista SP2 Upgrade. Microsoft and several of its Vista customers realized that Vista has a lot of problems, but people who have need of the service. Being able to download and install the SP2 can make Vista more stable, but I get the same message mentioned above, and so I am sure are a lot of other people who are trying to get Service Pack 2 integrated into Vista.

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• BlackBerry smartphones, I can't enter Thai language. How can I upgrade and choose the operating system for my BB9900?

  How can I upgrade and choose the operating system for my BB9900? I need thai input but on the site of H3G Italy software download is not all the language version. I don't know from which site to download.

  Hi niranaja

  If your device is running always on OS 7.0 then try 7.1 any Pack OS carrier that also supports Languages.But of Southeast Asia before opening your computer and uninstall any previous packs if installed OS on it. After that, try this:

  1. download and install on your PC a pack OS with any language by carriers

  • (Make sure you download for the same phone model)

  2. download and install the latest version of BlackBerry desktop from here BlackBerry desktop software software

  Then using software office perform your full backup of your device.

  3. search your drive C: Vendor.xml and delete them, there may be one or two vendor.xml (on changing your Pc folders option to show the hidden files/folders ):

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\Windows UserName\AppData\Roaming\Research in Motion\BlackBerry\Loader XML

  4. go into C:\Program Files Research In Motion\AppLoader. (For Vista or Windows 7 64-bit, the path will be C: > Program Files x 86 > common files > Research In Motion > AppLoader) double-click on Loader.exe.

  Upgrade will continue then after Installation of the new OS restore your BlackBerry Desktop backup

  Software.

  Once done open BlackBerry Desktop Software (7.1) > select Applications. > in the section of language and support for entry , select the language to be added to the BlackBerry smartphone (a + will appear next to the language to install) > click apply.

  KB13067 : How to get smart BlackBerry phone language packs.

  So please try it and let us know.

  Prince

  _____________________________________________________________________________

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• Can you give us a link of operating system for the oracle database

  Example of
  
  I want to know if Oracle 11 g (11.1.0.7). RHEL 5 support?
  
  I need the link where I can find tat
  
  Thank you

  user13278534 wrote:
  It will not help.

  Why?
  You asked "+ I want to know if Oracle 11 g (11.1.0.7). "support of RHEL 5 +".
  The doc I linked earlier, you can read:
  ' + This is the operating system for Oracle Database 11g Release 1 requirements +:
  +...+
  "+ Red Hat Enterprise Linux 5 +".
  It's the answer to your question. Now, if you have changed your question regarding the certification of the matrix, the best way is to check the following, help you:
  1. the Certification support Oracle (http://support.oracle.com) - non-free tool
  2 see the corresponding documentation (http://docs.oracle.com and search for the desired db version and the OS installation documentation)-free

  Nicolas.

• Can I use PXI embedded controller connected to the PC under LINUX operating system

  Hi all

  We ara tries to connect to PXI8106 (in 1042 chassis) to PC under LINUX via ethernet (cable cross at the moment), is the version of labview 8.5.

  Can I use PXI embedded controller connected to the PC under LINUX operating system?

  If Yes, where can I find its configuration in the .ini file?

  Thanks in advance.

  Hello bachir_elec,

  I'm sending you two links that I don't provide the information you need.

  Using Linux on an Embedeed PXI controller:

  http://digital.NI.com/public.nsf/allkb/821E0C115A3B4EF286257069004B8352?OpenDocument

  Configuration of your PXI Linux system:

  http://digital.NI.com/public.nsf/allkb/5CEEC941FB7B0488862573F700653B21?OpenDocument

  You can take a look?

• Hard drive swapping and the operating system between two laptops of R61e

  I have a R61e who broke chassis. Not a left hinge broken, but broke up chassis where the left hinge connects.

  I have the opportunity to buy a used one with no operating system.

  Both are of type 7650 and all have two 80 GB hard drive.

  Will it work if I just reverse this HARD drive with the operating system for the new portable computer?

  Yes, it should work without major problems.

  In the worst cases, you need to update to a couple of pilots.

  Good luck.

• How to make the updates of operating system for the limited user account?

  original title: how to make the updates of operating system for the limited user account?  Limited user account cannot access the Windows Update page, see instead cautioned against MS the most recent must be installed.

  XP Pro SP3 slipstreamed.  New a DBAN nuked HDD installation

  All the OS updates installed from Admin acct before creating the LUA

  AV installed AVAST

  all dot net uninstalled and then reinstalled to resolve a problem installing Quicken

  Updates to auto lit

  Active Windows Firewall

  Three solutions of workaround for Windows XP running as a limited user

  http://blogs.Computerworld.com/16502/three_workarounds_for_running_windows_xp_as_a_limited_user

  Survive a Windows XP Limited user account

  http://techknack.NET/surviving-a-Windows-XP-limited-user-account/

  See the response from Michael Kuntz - re: HAL files

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/thread/e8612ac4-b881-4FB3-85e7-32004932fb5f

  There is an available for installation of SP3 Cd

  Manually installing SP3 using the Microsoft Download Center or a CD

  If you have problems to receive the service pack from Windows Update, you can download SP3 as a standalone package from the Microsoft Download Center Web site, and then install SP3 manually. The installation package is intended for it professionals and developers, but you can always download and install this file.

  You can also order a CD from Microsoft containing SP3. For more information, go to the Microsoft site.

  To manually install SP3 using the standalone package installation or CD

  1. Do one of the following:

     • If you downloaded SP3 from the Web site, to install it immediately, click Open or run and follow the instructions on the screen. To install the program later, click on save and download the file to install it on your computer. When you are ready to install the service pack, double-click the file.

     • If you install SP3 from the Service Pack 3 CD, insert the disc into your computer with your current version of Windows XP running, and Software Update Installation Wizard should appear automatically. If this wizard does not appear, click Start, double-click my computer, click on your CD or DVD drive and then click AutoPlay.

  2. In Windows XP Service Pack 3 page, click Next.

  3. Follow the instructions that appear on your screen.

  4. Once the installation is complete, click Finish to restart your computer.

  5. If you disabled your antivirus software, turn it back on.

• Downloaded Windows 7 Pro trial version (previously using XP pro); currently a student of Microsoft Office 2003 version not in "all programs"; directly from the place of the app to get "operating system is not currently configured to run this application"

  Trial download using Windows 7 Professional (previously had XP pro)
  Student Microsoft Office 2003 version is no longer in "All programs" on the start menu
  Running EXCEL, WORD etc application of the subdirectory of the program file generates "operating system is not currently configured to run this application"
  Still have diskettes for installation for Office 2003, but the box with the product key is lost, this effect cannot be re - install.
  Microsoft Office does not appear in Control Panel programs in Windows 7
  How can I get Microsoft to work again without reinstalling Microsoft Office?
  If I have to re - install, how I get lost product key for Microsoft Office?
  I tried using Compatibility Wizard without result.

  Hello
  Welcome to the Microsoft answers site.
   
  The question you have posted is related to Outlook and would be better suited to the Microsoft Office community.
   
  Please visit the link below to find a community that will provide the best support.
   http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
   
   
  Thank you and best regards,
  Azam - Microsoft Support

• I bought a presario cq43-412tu. all the operating system supports this laptop. ?

  I bought a presario cq43-412tu. all the operating system supports this laptop. ?

  Hello

  Do you not need to run all the operating systems on the machine? With the help of VMware or similar is the way to go, but with this card, you don't have much choice, you must upgrade first to 8 GB of RAM. It comes with FreeDOS, you need at least a host operating system in order to run the virtual machine.  At this point, Windows 7 Pro or Ultimate is the starting point.

  Good luck.

• Why do I get the message that my operating system is not supported?

  My computer is running Windows 7-64 bit. I have the latest softwear on my iPhone and my iPad. I installed edge inspect on these devices and have the advantage of Google Chrome to inspect the installed extension. I have enter my password strengthened for both devices in the Chrome extension. Why do I get the message that my operating system is not yet supported?

  It's VERY interesting... even if I got this weird message, once I connected my iPhone and my iPad to the extension of Google, it worked! See all what I automatically in Google Chrome displays in the application of edge inspect on small devices. It's clean! The only problem I see is that Adobe needs to replace the error message with information about the use of the application.

• What is the nucleus of a file system for any operating system or file system - at the heart of any os?

  Hello

  What is the nucleus of a file system for any operating system or file system - at the heart of any os? Thank you, BS

  Original title: file system - at the heart of any system

  Hello

  Use Bing or Google to find your answers.

  Here's a little info:

  File system
  http://en.Wikipedia.org/wiki/File_system

  Category: Computer file system
  http://en.Wikipedia.org/wiki/category:Computer_file_systems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">