Advice on the use of the tool pen to create the glow effect?

Similar Questions

• Add the glow effect to a composition before = > disappear from the composition before!

  Hello

  I try to add the shatter for a composition before, with 3 layers, but when I add the sparkle effect, this effect does not work, and he disappeared from the screen,

  The team hit the wall

  Thank you.

  Shatter starts from the beginning of a film layer (the demo) not the inPoint. You can define the radius of force1 0 or you can set the depth of the force 1 to the inverse of the RADIUS. (RADIUS = profondeur.4 =-. 4) with a hold keyframe or a regular keyframe just before where you want the glow effect to begin. Then define another keyframe when you want the glow effect to start if you have used a hold keyframe, or when you want that force to break to complete his action, if you use a regular keyframe. So, it is easy to understand if you take a look at the controls.

  

• Initiate an explosion with the glow effect

  Thank you once again for all your help guys.  Now, I am creating an explosion with a glow effect.  Problem is when I apply the glow effect to my form, I created, it assumes I want the explosion to happen as soon as the video starts to play.  In fact, I would like the explosion occur somewhat later in the video, maybe about 25 images in the video.  I can't find a setting for the keyframe at the beginning of the explosion.  Is there a key to this picture and I can't?  I even tried out the shape in the timeline panel so it is not up to that on the frame of 25, but it does not work either.

  Thanks again

  Let me know

  You didn't follow my instructions or experiment with the settings of the force.

  In wired mode, go to the section 25 and activate keyframes for position 1 force and RADIUS. Now move back a section to frame 24 and adjust the size and position of strength 1 just behind the layers and small do not to touch the later. If Force 1 and 2 do not affect the layer, it cannot explode.

  Shatter is based on the physics of the real world and who clicks on in your head as soon as you will be able to do amazing things.

• A point of advice on the necessary effectiveness when inserting data

  Hi all
  
  Here's the deal.
  I've got chunks of documents must be inserted into a table and I chose using a loop to make the insertion.
  And now, I wonder who is the effective way to do it.
  
  Solution A: immediately commit for each record to be inserted into the table in the loop.
  (transactions is frequently performed during the loop)
  Solution B: commit after as a transaction with insertion of all is made in the loop.
  (The only giant transaction is executed)
  
  My concerns are:
  
  For the solution A:
  1 validation callback to the server based on the single record Oracle would make the server performance suffer.
  2. If something goes wrong with a record insertion, I won't be able to undo any changes to its original state due to the successfully inserting previous records before any exception occurs.
  
  For the solution B:
  1. due to the volumn of transaction, there could be problems with tablespace, allocated memory, etc.
  
  Well, it seems that B is a better choice because I can undo all changes if anything bad happen in any point in time during the loop because it is not validated til the ends of the loop.
  
  Sorry, I m always on the path of learning Oracle and its associated technologies.
  
  Any point of advice or help on these?
  
  Many thanks in advance.
  
  Kind regards
  Jay

  A good article to read.

  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:4951966319022

• Need advice on the sound effect.

  Hello

  I have a small production recorded inside on green screen. After the seizure of the thing, it is supposed to look as if the talent is standing outside talking.

  Is there a way of hearing CS6 to put on a filter / effect to make the sound more "outsidish"?

  Thank you.

  Ulf

  Well, the thing with 'outside' is that it is usually the most, dryest acoustic, you can imagine.  Unfortunately, it is easy to add various reverberations of room sound atmosphere - but darn almost cannot remove a sound room ringing hollow, if it has been registered like that.  So the question is: did you close enough that the noise from the Hall is not a problem with the microphone?

  In any case, instead of a filter, what I would probably do this is add a loop of some outside noise.  That's exactly what it would depend on your background, but even a few song light wind/bird/cars driving by / waves on the sea, or anything that could help with the illusion.

  If you don't have your own collection of outdoor environments, I can recommend http://www.freesound.org as a source of excellent (and free).  Just search for 'atmosphere garden' or 'atmosphere of the forest' or whatever and you'll have plenty of choice.

• What happened to the glow effect?

  I built this site and posted before my recent conversation with the paid version. I have a logo (png file) that I placed and applied the effect of brightness in the Muse. He looked very well before.  After the transition to the paid version looks now quite bad.

  http://clikclik01.BusinessCatalyst.com/DEMOA.html

  There is a bug with the resized images of PNG that was first reported by a customer 2 or 3 days ago now. He is currently actively worked on. Thank you for taking the time to report it.

  In the meantime I think you should be able to avoid this bug if you resize the image PNG outside the Muse (in Photoshop, Fireworks or other image editor) to the exact size you need and then place this image in Muse. We believe that the bug is introduced by the image resize code in Muse, kind of resizing outside the Muse should avoid black speckled artifacts.

  Sorry for the inconvenience. As soon as we have this isolated, fixed and tested, I expect that we will get an update (probably in the next couple weeks).

• Why the text effects are not up-to-date in preview mode? CC2015

  When you use simple text like the glow effects, the effect is not updated when the preview mode is checked.

  This makes the feature extremely tedious to use.

  The question has arisen in the past without a solution...  Text effects do not update on cc 2015

  Please advise as soon as possible,

  Thank you very much

  John

  Exactly what version of InDesign are you using? The current version is 2015.3 (11.3). What operating system? Have you tried to restore your InDesign preferences?

  Garbage, replace, reset or restore the application's preferences

• The strange outer glow effect, help!

  Hello

  I apply an outerglow to a m6rne I drew ion Illustrator, and I see a strange effect... as if the glow has bed outside the shape itself.  I downloaded an image where I circuled the glow effect "bled".

  Any ideas?

  I am running CS5 on my MacPro.

  

  Effects > Document pixelation effect parameters > increase the amount of "add to".

• How do I move the two forms at the same time using the tool pen

  I tried merging groups 1 2 and 3, so they can be handled together. I've grouped them and they merged, but when I try and move with the pen tool they move separately. For my project, I need to be able to change the shape of 12 and 3 using the pen tool, how would I go to do this?

  they set out like a vector Illustrator diagram, I've merged them there and imported, but they always move separately.

  Thanks in advance

  If you work with multiple masters and the tool pen, you use the Ctrl/Cmnd key to change the pen of a selection tool that resembles a small white inverted V. You can drag a selection around multiple points on a path and then hold down the SHIFT key and select more points on a different path. Once selected you release the Ctrl/Cmnd key and when you go near a selected vertex selection tool appears again, but this time it is a small black reverse V. and drag.

  If you want to transform these points then all you have to do is press Ctrl/Cmnd + t when they are selected and you will actually have a better tool paths of transformation you get in Illustrator.

  He is essentially on the functioning of the tool pen in Illustrator if you select the direct selection in artificial intelligence (the key) and then the pen tool (p key) and use the Alt/Option key to switch to the top to convert or Ctrl/Cmnd to direct selection points.

  BASIC Edition of masks stuff covered in the help files and explained in community resources, if you enter editing masks or change forms or the pen tool in the search help field at the top right of the AE.

  If you are using multiple forms on a single shape layer, you can do the same by providing that the forms are curves of Bézier or Rotobezier.

  If the paths of the form or masks are on separate layers, you are out of luck. There is no way to change the multiple paths on different layers at the same time. I don't expect that there is a way to do it. Here's a short demo:

• Why Illustrator change my anchor points and size race randomly when I'm using the tool pen?

  Why Illustrator change my anchor points and size race randomly when I'm using the tool pen?

  k,

  It looks like you might be haunted by the Align attribute to the ghost of the pixel grid.

  You can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher. It is crucial that the checkbox is disabled completely, not just a - which also count as ticked.

  It may be noted that even align with the pixel grid is cleared with all the selected objects, align new objects to the pixel grid is checked as the creation of new objects will result in these new objects being aligned, even when they are created from existing objects that can happen with Pathfinder operations.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

  Here is a screenshot of exquisite made per ton in the first post:

  https://forums.Adobe.com/message/7841770#7841770

• I get this error message, "could not not use the tool pen because of a program error."  What should I do to fix this?

  Like the above statement, I get this error message, "could not not use the tool pen because of a program error."  What should I do to fix this?   I use PhotoshopCC a lot for work, so if someone could help me quickly, I would be grateful.

  Please read this and acts accordingly (restoration of preferences after making sure all custom presets, actions, patterns, brushes etc. have been registered may be of special interest):

  t http://blogs.Adobe.com/Crawlspace/2012/07/Photoshop-basic-troubleshooting-steps-to-fix-MOS - issues.html

  http://forums.Adobe.com/docs/doc-2325

• In using the tool pen as a Guide?

  Is it possible to use the tool pen of freedom as a guide? I used the "Auto layer blending" and there are some shifts. If I use the tool pen of freedom at the edge where the mixture was made. After I correct misalignments, I want to get rid of the sketch of the pen tool. I tried to put the pen tool on its own layer, but when I deleted the layer, the pen marking tool was still there. Is it possible to get rid of the marking pen after resolving misalignments?

  Thank you

  Lou

  loudiamond wrote:

  Is it possible to get rid of the marking pen after resolving misalignments?

  Delete it tracks Panel.

• Where is the tool pen?

  It is a very simple question that I can't understand, and this may sound stupid. Where is the tool pen? I'm pretty new to sequels, I used CS6 for a long time but now in DC, I can't find the pen tool, it used to be in a bar on the top and now it is not there. I feel very stupid, and there is probably a very simple answer. I want to make a mask. IM on mac using Adobe after effects 2015.

  the first thing I teach my students is "reset workspace. When you start with the software and it has so many shortcuts you'll ruin things. probably, you don't see the tools Panel. Windows-> work-> reset standard space.

  and if you want, you can use the shortcut 'G '.

  see if it's ok now

• size of the line tool pen

  Is it possible to adjust the size or the color of the line that is made by using the tool pen?

  No, other than a hack to use with it to create a shape layer and put a hit on the way.

• [After Effects] How to use "Convert Vertex Tool" for several vertex at the same time?

  Hey guys,.

  I used the "Convert Vertex Tool" to create a curve on a step of stairs and by mistake it curve all the point of my staircase which is what I wanted to do but point by point. I didn't know it was possible to point (s) at the same time.

  And now I keep it again. I want to convert all the points as a curve at the same time.

  If someone has the magic shortcut, please let me know.

  See you soon.

  

  It's all using the right tools.

  1. Select the layer with the path
  2. Select the tool pen (g)
  3. Press and hold Ctrl/Cmnd and place the cursor on any part of the path to select - you will see a solid filled small arrow
  4. Release the Ctrl/Cmnd key and move the path tool, so you can drag a selection around the verticies
  5. Hold Down the Ctrl/Cmnd key to reveal an arrow small white selection
  6. Drag your selected verticies
  7. Release the Ctrl/Cmnd key and press the Alt/Option key to reveal the convert vertex tool
  8. Click on any vertex to change linear to Bezier or vice versa

  This allows you to convert all the selected vertices. You can't click and drag, but you can convert it to a symmetrical set of Bezier curves.