AE even project with several compositions / need them changed first

Similar Questions

• Is it possible to implement the sequences to browse to project with several tables of contents and conditionalized modules

  I use RoboHelp 9 with WebHelp output.

  I have five outings, which one contains help for common functions, while the other four contain help for modules under license. When a user opens a module under license assistance, the user sees the soul help and authorized assistance. In addition, the files are conditionalized so that the unauthorized search a help licensed module brings nothing.

  I have been solving problems with the previous topic and the next topic which, thanks William, I learned are associated with browse sequences. After having tried various configurations, I have a few questions:

  • HR support a sequence to travel alone in a project, even when the project has several outputs & fakes?
  • If HR supports a sequence to browse only, does that mean that there is no way to create a unique navigation for each separate output sequence?
  • If HR supports several sequences of travel, which is the workflow?

  I also maintain a table of 'master' contents which contains all the modules, frequent and without a license. What I've done for now is to autocreate a browse sequence based on the table of contents "master." When I generate the output of a module under license, which is conditionalized, I only see the table of contents for this module and, therefore, can only travel between books and subbooks for this add-on. I also checked that the subjects that do not appear in the module conditionalized as for another module licensed, do not appear in the list of search results either.

  Carol

  Me again, Carol

  You also questions about the functional differences between WebHelp and WebHelp Pro, so let me explain.

  I know only two major differences other than (the additional benefits of analytical feedback reports) and the management of 'Zones' with authentication in RoboHelp Server.

  1. The behavior of browse sequences as explained above
  2. The fact that the categories of content are not supported in WebHelp Pro for this latest version 9.

  In regards to sequences to browse you try to anticipate the various modules (licensed, etc.): multiple browse sequences are included in an single . File BRS. Sequences are defined in the XML code in the single file.

  As a solution (for WebHelp and WebHelp Pro), you could create a Help.brs of the NPM. that you have already created a module; then backup and archive. Then create a change for the different module before generating again. The Help.brs of the NPM. will need to have the same name as your project, so you will have to manage the .brs desired file in the project folder when you build this version. All your other choices (table of contents, Index, conditional tags, etc) remains the same for the respective modules.

  Finally, I notice that you generate apparently WebHelp Pro right now even if you are not published on the server of HR? This is really not the best practice. You must generate WebHelp plain for a web server that has no HR server on it (even if you can be getting away with it). Regarding your concern about "breaking" something; each output is placed in another! SSL! folder automatically when you build, so you should be able to generate WebHelp without interfering with the release of WebHelp Pro. Then, you can republish on the HR using WebHelp Pro Server, whenever the server is ready.

  John Daigle

  Adobe Certified RoboHelp and Captivate instructor

  Evergreen, Colorado

  www.showmethedemo.com

• Error handling in QMH projects with several sources of error

  Hi guys,.

  I have a head scratcher:

  QMH architecture, I have a state machine that describes a certain task of legislation on different instruments.

  Each of these instruments has its own message loop vi management and each of these loops could cause errors.

  I want to pass these errors to the state machine (VI main if you want) in order to take appropriate action or - at least - inform the user what the error instrument came. Currently, I use a global variable for each error source and merge errors in primary VI.

  Problem: Multiple errors, only the one connected to the first entry of the fusion VI errors is displayed.

  What is the best way to get errors from several sources to level superior screw and keep all the error information for debugging purposes?

  Thank you!

  
  

• I need Adobe Creative Cloud 2.0.1.88! My 2014 CC versions are in the garbage and I like all programs of 2014 CC, I am familiar with all, I need them back please.

  I need Adobe cc 2014 return!

  Scroll down to the lower 1/3 of the page to '

  Install the previous versions of the applications

  Download and install Adobe Creative Cloud apps

• export a project with several audio tracks changing volume level regardless of the export format

  Recently, I had to submit a TVC and discovered this first changed the power after export level, when the TVC has no quality control.

  I checked the sound intensity of other formats that I had exported and the same thing happened the sound intensity, she had changed.

  After a bit of troubleshooting, I've found a workaround. I have mixdown all tracks in adobe hearing to a track and then imported it in first.

  Once I did the sound intensity did not change after the export.

  "Workflow" for when it did not work.

  I used the edit in adobe for audio tracks from first hearing.

  Corresponding to the audio for the power level, I wanted to and then recorded each track.

  Export first.

  To check the sound intensity

  Put in the file exported in new project first

  Edit audio in adobe hearing.

  Drag the audio file in game audio to check the sound level.

  I use

  Adobe first Pro CC v8.1

  Windows 7 on PC

  Fix this adobe.

  So you should use Loudness Radar in the mix... .to requires the specification of the broadcaster.

  Your workflow such as described did not understand that.

• Tecra m2V faced with applications. Need to change the virtual memory?

  I have a Tecra M2V under XP. I've been experiancing slowdowns in all of my running applications. I have cleaned the readers of PC, defragmented etc but there seems to be no change.

  What is virtual memory? If so, how can I solve them?

  If this isn't the case, is to do with XP - I mean with each XP update that we had there at - it something like the BIOS settings that need to be updated?

  TIA

  The

  Hello

  The Windows XP operating system use a space on the hard drive as virtual memory. This means that a file is a space on the hard disk that Windows uses as if it were RAM.
  The file size is variable and you can change the size of file in the performance Options.

  Please go to control panel - system - Advanced tab. You will find the Performance parameters.
  In the performance Options, you will find 3 tabs (Visual effects, advanced, Data Execution Prevention). On the Advanced tab, you can find the option to change the virtual memory.

  Good bye

• USE FIREFOX WITH ENVY 5530 - NEED TO CHANGE THE PRINT SIZE OF LABELS

  PRINTING LABELS WITH ENVY 5530 IS FAR TOO SMALL. WINDOWS. I USE FIREFOX. HELPS TO PRINT ON LABELS BIGGER

  Hello

  For Firefox, please

  b click on print, you can see preview before printing

  (b) on the top, you can see scale (near Middle), you can increase or decrease in % to get the right size

  Kind regards.

• .xls files will open with IE. Need to change file association, but excel does not appear as an option.

  Excel files are currently set to open with internet explore as default. I went to change the file association, and although my copy of excel is fully licensed and operational, excel does not appear as an available program. Has anyone experience this problem? Thank you.

  Right click on a .xls file and choose open with > choose default program. Then click Browse.

  Navigate to C:\Program Files\Microsoft Office or C:\Program Files (x 86) \Microsoft Office for 64-bit Windows versions.

  Here is an office folder. Office12 for Office 2007 and Office14 for Office 2010. Go in the right folder and thin Excel.exe.

• Windows update PROBLEM - always needs to change first the file distribution system

  I am running with Windows Vista Home Basic Edition and are struggling to update my files after a clean reinstall.  Finally got through many strategies, but doing so thereafter (once) noticed that the failures occurred each time that the "System of Distribution" file in the windows folder has not had been empty of logs and the previous downloads.  Don't know what that means.  Any ideas?  Could there be a problem with the hard drive, processor, motherboard, short circuit? (Have no problems downloading on other computers in my house, my overall connection is good).

  Thank you.

  Hi Loraoshea,

  You can read the following article and try to reset the Windows Update components and check if it helps.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Need to change the color of flight hover/mouseover on flash file - HELP!

  Hello world

  I am doing a project for work and need to change the color on this file I purchased from iStockPhoto. It's a flash world map file, which highlights the countries you select Green. I just want to change it so that all the highlights are made in red instead, but no am not a flash developer so don't know how to do it. I used flash briefly before for minor changes, but can't seem to find the answer anywhere. I tried Googling it... etc!

  This is the file that I bought.

  http://www.iStockphoto.com/file_closeup.php?id=2788655

  Any ideas would be MUCH appreciated!

  I took a glance at the file you sent. This file was made some time in an older version of Flash. I'm guessing that version 6. The Actionscript code in the movie is AS2. The file is in the scenes and consists of buttons, a lot, a lot, buttons. If you open the movie library, you will see a very long list of items that are used in the film. The first point, Afghanistan, for example is a single country. If you open this button in the editor, you will see there two executives, above. Each country drawing in each of these frameworks is composed of a group. That's why he shows an overview rather than the country in color.

  To change the color for the rollover State:

  1. go to section in addition to a single country.

  2. choose Select all from the Edit menu, or use the keyboard shortcut.

  3. choose a jump outside of the Edit Menu. This will separate each item in the group.

  4. use the selection tool to select the sketch.

  5. in the toolbar, select a new color line and filling for this country.

  Repeat if necessary. Save often. Work of a duplicate of the original film, just in case.

  Simply re-color of each country, the continents are made up of the country.

  I hope you have a lot of time, it will be horribly tedious.

• I copied a title several times throughout a project on the same video track. I need to change one thing in each title, but when I change one thing on one, he turns them ALL. How can I avoid this?

  I copied a title several times throughout a project on the same video track. I need to change one thing in each title, but when I change one thing on one, he turns them ALL. How can I avoid this?

  dariusb

  What version of Premiere Elements and on what operating system works - it? At the moment a generalization...

  You need to create the title in the Titler, close the titration module, open the media project, right click on the thumbnail of the title in the media of the project and select duplicate.

  Then drag the duplicate to the timeline. Double-click the duplicate to open the titration module to change the title in doubles.

  If please examine, study and provide more information, so that I can refine (Customize) the answer for you.

  Thank you.

  RTA

• Import Illustrator file with several layers and sublayers as composition by keeping all layers and sous-calques

  I drew a map of the country with several layers and sous-calques, including the streets, cities, railroads...

  Now, I want to create a template for my colleagues in After Effects.

  To do this, I want to import the AI in After Effects, holding all sublayers and layers in compositions and subcompositions.

  When I do, I get the first two layers correctly, others just in a merged publication.

  What can I do to get all the layers of each as a layer in After Effects?

  Best regards, Raphael

  Illustrator imports only the first level of the layers. If you have groups or paths below you must release layer groups. The layers will then be stacked in the order in the form of layers. Then you need to move them to the top.

  The procedure is to select a layer in the layer Illustrator Panel, then without selecting any which specific element in the layer click on the menu in the upper right corner and select release to layers. All an elements in this layer will be transformed into layers. Now, select all, and drag them to the top above the original layer. This will leave the empty original layer and put all the elements in new layers.

  Here is a tutorial I made there are a bunch of years and who uses this technique to transform a mixture in a morphing.

  Morphing with Adobe Illustrator. I hope this helps.

• Creating a DVD with several file format of files/best project for export (PE13)

  Hello! I first 13 (just improved 10) elements and trying to figure out the best way to save my movie on DVD. There are at least two different project files (the film, shock and eventually a video "making of") that I want to put on the same DVD with a menu. A couple of years, trying to do this with first Elements 10, I could not get it to work and had to use a separate DVD menu software. I can do that again, if I need to, but the software I used was lost, so I thought I would check to see if it can be done first before going to buy it again.

  If I can't do it in first, I need advice on the best format to save project files to burn to DVD later. I'm a novice, and most of these sizes looks like gibberish to me! I had problems in the past (a few years ago) with a black border appears around the film, after he was saved, reducing the size of the movie, and I'm hoping to avoid that...

  The film is about 1 1/2 hrs long

  The blooper reel is about 17 minutes

  If there is more info to help answer my questions I'll be happy to find it!

  alsyarn

  Thank you for the important information for troubleshooting your Premiere Elements burn on DVD-VIDEO to DVD disc so that it presents throughout without black borders.

  Open the first elements 13/13.1 to his Expert workspace, go to file Menu/New/Project and set the project preset manually to

  NTSC

  DV widescreen

  Do follow the following order

  • Open the project in the workspace Expert and go to file menu/new project and change the settings.
  • In the settings, set the project preset to NTSC/DV widescreen. OK to get out of there.
  • In the dialog box new project opens, rename the project and make sure you have a checkmark next to the "Force selected setting on this project." OK to get out of there.
  • In the Expert workspace, import your media source by using Add Media / choice.

  Import your Source 3 (720 x 480 widescreen display 16:9) - which should occupy all the space area monitor Edit which is a space of DV widescreen size.

  Import your Source 1 (1920 x 1080 16:9)-that must fill the space of the monitor Edit once the scale is automatically just to fill the space of the Edit monitor.

  Import your Source 2 (720 x 480 which is what is because it has a format of 1.0 pixels)-that does not fit properly. Balance this video in Edit area monitor to enter space monitor without black borders.

  It is unclear why the project 720 p settings have been set for this instead of NTSC DV widescreen. But please implement your project as described above, then export as suggested.

  I have suggested above based on destination DVD VIDEO to DVD disc. When you have a montage with several formats, you set an adjustment everything with scaling in the monitor area space Edit put in place by the predefined project and major. General guideline - the project preset should correspond to the properties of the media source... and with more than one type of format, you define major and if adapt everything with scaling if you don't want black borders.

  Another tip... When you want to scale width and height separately in edit box monitor, first go to applied effects tab/Applied effects Palette/panel of the selected clip expanded Motion and remove the box keep the Proportions.

  Please consider. And then we'll try to condense all that into a workflow that will work for you.

  Thank you.

  RTA

• How to use commons composition on-board charger to charge several compositions with a next button and back?

  I work on an interactive book and have set up each page as a separate publication on the edge.

  I use the common edge JS library to load several compositions in a main composition.

  You can see how it works here: edge Commons - Extension Library to animate Edge and Edge reflow. EdgeDocks.com

  The way in which the municipalities of edge tutorial is set up requires a button for each publication that I want to load. I'm interested in loading multiple compositions with a 'next' and 'back' button and a 'shot left, the "forehand" on the content symbol gesture loaded in each composition. I also have the characteristics of drag on the icon content do not interfere with the interactive elements on the charged composition.

  Please suggest a solution that works without adding additional scripts beyond the Commons of edges and jquery.

  Sort of. I use this code inside an action for a button symbol. But it does not work perfectly. Trying to debug.

  I would like to know if you have a bit of luck.

  Check if there is already a pageCounter

  If (typeof EC.pageCounter = "undefined") {}

  It does not exist, so initialize it to the first page

  EC.pageCounter = 2;

  }

  check if the page is only 1 digit - patch for single digit

  If (EC.pageCounter< 9)="">

  It is, so we need complete a 0 on the front.

  EC.pageCounterString = '0' + EC.pageCounter;

  for example, 01... 09,11,12, 13... 115, 222352...

  }

  else {}

  EC.pageCounterString = EC.pageCounter;

  }

  EC.loadComposition (EC.pageCounterString + "/ publish/web /" + EC.pageCounterString + ".html", sym.$("container"));

  EC.pageCounter = EC.pageCounter + 1;

  TODO for back - 1

• How to create the project with mutibple workflow (several BPEL files)

  Hi all
  I am newbie with Oracle BPEL. Now, I need to create a project with a lot of process (I mean a lot of .bpel files). So, how should I do. I see in JDeveloper, I only create a .bpel file in a project.
  
  Can someone help me?
  Thanks in advance
  
  Nguyen

  You can call several BPEL processes in the BPEL process. He will not however be a project. You will need to deploy the BPEL processes to the BPEL process family school and work.

  You say that you have a starting point. You should be able to achieve this with N flows, but another method would be to put a BSE on the front and the payload can call other BPEL processes.

  see you soon
  James