Need to change the color of flight hover/mouseover on flash file - HELP!
Hello world
I am doing a project for work and need to change the color on this file I purchased from iStockPhoto. It's a flash world map file, which highlights the countries you select Green. I just want to change it so that all the highlights are made in red instead, but no am not a flash developer so don't know how to do it. I used flash briefly before for minor changes, but can't seem to find the answer anywhere. I tried Googling it... etc!
This is the file that I bought.
http://www.iStockphoto.com/file_closeup.php?id=2788655
Any ideas would be MUCH appreciated!
I took a glance at the file you sent. This file was made some time in an older version of Flash. I'm guessing that version 6. The Actionscript code in the movie is AS2. The file is in the scenes and consists of buttons, a lot, a lot, buttons. If you open the movie library, you will see a very long list of items that are used in the film. The first point, Afghanistan, for example is a single country. If you open this button in the editor, you will see there two executives, above. Each country drawing in each of these frameworks is composed of a group. That's why he shows an overview rather than the country in color.
To change the color for the rollover State:
1. go to section in addition to a single country.
2. choose Select all from the Edit menu, or use the keyboard shortcut.
3. choose a jump outside of the Edit Menu. This will separate each item in the group.
4. use the selection tool to select the sketch.
5. in the toolbar, select a new color line and filling for this country.
Repeat if necessary. Save often. Work of a duplicate of the original film, just in case.
Simply re-color of each country, the continents are made up of the country.
I hope you have a lot of time, it will be horribly tedious.
Tags: Adobe Animate
Similar Questions
-
Hello, a graphic designer created my logo. I need to change the color from black to white and then make it bigger so I can add it to a T-shirt. I looked online and can't find a way to do it. Help, please
Guess that's your logo. His place of 1000px
Select each layer, and then type cmd - I or ctrl-I on the keyboard and that will reverse the color of the objects on the layer. Black is the
opposite of white
And then resizing the image size under Select image menu and place values expanded in the dialog box
as below.
That's all. It may be useful
Terri
-
Need to change the color of the model
I realized a customer to a model site and they chose a model that has been a PSD (attached) and I turned into a working site. Now, they say they want it to be blue instead of green it is. I don't know where to start. I guess I need to go to each layer and change the color of a variant of blue. Is there a quick way to do it? I don't know yet how to change colors. Any help would be greatly appreciated.
Thank you!
You don't need to do this for each layer. Only those with the color of the Web page elements and only those that are visible. (eyeball on in the layers panel)
When you select the layer, and then you go to the Image menu, settings and select Variations. You can interactively experiment until you find what's best.
My layer thumbnails are large so I can see at a glance what I look at. Use the layers panel menu to display Options Panel and select large thumbnails.
Of course save this model before loading in the PS, in case you should do more.
That should help you get started.
-
Hi, need to change the color of line at run time
Hi all
I have columns in the paintings is one of them for YES and it is of TYPE I create two attribute for this and place like this to trigger post_query block-level after that I get what I want the color of the YES and NO, but
NOW I NEED TO CHANGE THE LINE COLOR IN FULL WHAT IT TAKES PLEASE GUIDE
IF: ORDER_TRACKER2. TYPE = "YES" THEN
SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.) TYPE ', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
ON THE OTHER
SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.) TYPE ', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
END IF;
Thanks and greetings
Vikas SinghalIF :ORDER_TRACKER2.TYPE = 'YES' THEN SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.TYPE', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO'); SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM1', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO'); SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM2', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO'); SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM3', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO'); SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM4', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO'); SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM5', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO'); ELSE SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.TYPE', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES'); SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM1', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES'); SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM2', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES'); SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM3', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES'); SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM4', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES'); SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM5', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES'); END IF;
-
Need to change the color of a dark black blue file
I need help in the conversion of a file of a blue color with an intense black. Black rich meaning 40 c, 30 m, 30y, 100 k in the darker areas and the rest of the file must have a neutral gray balance. It would be easy if it was just a solid background, but the file I provided has a star on the middle of it. I think it can be done with the mixer layers or hue/saturation, but my efforts have not produced the file exactly as required. This is a jpg of the attached file. Any help would be greatly appreciated.
1 convert the file in Lab Mode and zero a and b channels to produce a monochromatic image without sacrificing the details.
2. now convert to grayscale. It will look like this.
Choose Edition > color settings > CMYK > customized, choose gray Componeent replacement (GCR) and change the black generation heavy. Note that now the Gray ramp shows curves similar to your goal.
Now, choose Mode > Mode CMYK color to shades of gray in this change CMYK
Go to curves, choose the darkest black area in the image, mark.
The values would be present as follows in the Info Panel. Notice they are cries of aim you values remotely.
Adjust the point on the curve in each of the CMYK channels to match your points of view, as shown below
Note that we now have the values of your target and the image looks like this:
Last return, use your black generation assigning one you normally.
One final note: Although your screen might not reflect a difference, I suggest you talk about your lithographer values that you have chosen. They add up to 200% solid which you can choose to increase to an even richer black (if the paper supports all).
-
I need to change the color of my vector symbol
I bought a vector drawing on Adobe Stock Photo, it's the number #64483594
How coulkd change its color?
Thanks for your help!
Tiziano
a quick way:
- Open the file in Illustrator
- Select the all yellow-white ornament
- Press [R] / / Rotate tool
- Press [Enter]
--> 60 °
-->, click on Preview in
--> Press the [Copy] button
(Maybe you have to arrange the duplicate)
If the construction is ok:
- Select the ornament set yellow-white (original and copy)
- and merge with pathfinder (add)
Have fun
-
Inline CSS used here for reasons of expediency:
- "" style = "background: yellow" href = "... / Offers/promos.htm" title = "Promotions" > Promotions
-
I need to know how to change the color of an image.
I'm not a designer and do not pretend to be. Someone made a logo for me and gave me in photoshop. But I need to change the color of the logo. I bought the creative cloud and watched tutorials for days. I used the Replace Color tool and get out of there, but not really. Help, please. :/
Hi Rachel, if you have the file have you can edit it directly in its native software that is Adobe Illustrator.
To change the color to do the following.(1) open the file in Adobe Illustrator
(2) once opened, select the white (or black) arrow tool in the upper left corner of the screen and click on the green lines. 90% this will select the entire line.
(3) now, look at the bottom of the tools Panel on the left side of the screen, there are two colors. One is for the fill color and one for the color of the outline. One of these two is probably green. If so, double click it and choose the color you want. Click ok in the color Panel and you're done.
(4) do the same thing on each side of the logo.There is a chance, the designer of the whole logo in groups. If this is the case (you will notice because you will not be able to select only the lines), take the black arrow tool and double click on the logo, until you'll be able to simply select the lines.
Please let me know if it was clear and that you succeed.
Kind regardsMartin Benes
Adobe Acp -
Change the color of text Cluster
I need to change the color (text or backgroung) of an individual in the cluster of 8 positions index.
I make a test with 8 different results and at the end of each result, I need to change the RED color to fail or green to go. I have a result Boolean cluster of 8 positions (T = pass) and F = Fail and I have another post 8 text cluster to change the background color or text.
Thanks to you all
Here's a method using text blocks. As Raven Fan said, you can use the Boolean values (can be personalized if you don't like the default appearance) which have the desired appearance.
-
How can I change the color of my fonts on the desktop icons?
I need to change the color of the text on my desktop icons, how do I do this?
Hello petejgraham,
Thank you for visiting the Microsoft answers community.
The color of the icon is not available for change in Windows by their design. There are however third-party applications that can allow you to have more control over development within Windows. You can search on your search engine preferred, for exactly what you are wanting to do, and it will give you options.
Hope this helps
Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Chris.H
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Dynamically change the color of a string (part of the) text
Suppose that consider the string Hello "it's the first Blackberry Application" including the color of the text in black, but a few changes need to change the color of the Blackberry to RED as below
previous - Hello this is the first Blackberry Application
After - Hello this is the first Blackberry Application
I tried with split the text into several fields and change the color but I need single solution for Richtextfield / EditField / text box.
plese give me some suggestions...
Thanks in advance
Only ActiveRichTextField will do this for you.
You define regions, join fonts and/or attributes to the regions, including the background and foreground colors.
-
change the color of line based on the value of column 5 Apex in the classic report
Version of the apex 5.0.0.00.31
Standard universal theme
Page theme default template
Classic report
Foldable report template
Hello
I know this question has been asked several times here, but I'm working on 5 Apex and need to know the correct way to do it in this version.
I need to change the color of the text of the entire line (no background color) based on the value in one of the columns of the classic report. I have just two conditions, if the value of column = Yes, color should be red, otherwise it must be green.
I am new to jscript and css, so appreciate if someone can tell me the solution with steps.
I have already checked this link that changes the value of the column, need to do something similar to the whole line.
https://tylermuth.WordPress.com/2007/12/01/conditional-column-formatting-in-apex/
Hi coolmaddy007-Oracle,.
Here's an example set up on the apex.oracle.com according to the specifications you gave: https://apex.oracle.com/pls/apex/f?p=35467:1
Version of the apex 5.0.0.00.31
Standard universal theme
Page theme default template
Classic report
Foldable report template
Here is how it is done:
Create a dynamic action with the following specifications:
Name: Give the appropriate name
Event: After refresh
Selection type: region
Region: select your region classic report
Condition: No strings attached
Action: Run the JavaScript Code
Fire on loading the Page: Yes
Code:
$('td[headers="JOB"]').each(function() { if ( $(this).text() === 'MANAGER' ) { $(this).closest('tr').find('td').css({"color":"red"}); } if ( $(this).text() === 'SALESMAN' ) { $(this).closest('tr').find('td').css({"color":"green"}); } if ( $(this).text() === 'CLERK' ) { $(this).closest('tr').find('td').css({"color":"blue"}); } });
NOTE: Download the selector appropriate for your knowledge $('td[headers="JOB"]') case using firebug/browser development tools.
Items concerned: leave blank.
PS: Changed the example to change the color of text instead of the background color.
I hope this helps!
Kind regards
Kiran
-
Change the color of a specific character in a text.
Hi guys! for a project I need to change the color of each "a" in a text. Is there a way I can do it automatically?
Aaaah! Try using a simple grep style!
If you need to play in all the paragraph styles, map of style grep using this very clever script written by Colin Flashman, King of merge data!
https://DL.dropboxusercontent.com/u/55743036/grepstylemap.jsx
or a simple F/R.
-
How to change the color of the navigation bar based on other
I need to change the color of my navigation bar, on my page. I already did on my other three pages. With the help of http://work.smarchal.com/twbscolor/scss/9b59b68e44adecf0f1ecdbff0 , but now I have made a new page I don't know how to change the color of the navigation bar to match exactly the three other pages. Please help.
Bootstrap CSS is read-only and should never be changed.
Creating CSS code on each web page is redundant & can cause inconsistent styles. Use rather a stylesheet external called custom.css including all your HTML files are linked. In this way, when you make changes to your custom.css file, these styles will automatically apply to all pages of the site.
Both inside the
Tag under the Bootstrap CSS code, add a link to your custom.css file.Nancy O.
-
Change the color of line based on condition.
Hello
Am using jdeveloper 11.1.1.6.0
I slipped and fell by xxxVO as an array of af in my jspx page.
This vo has the attribute of gravity which is a component to select only one option.
I need to change the color line if gravity = 1.
How can I achieve this.
Kind regards
Prasad K T,.
9840021070.
Refer
ADF: color change of the value of the column according to the requirement
Nancy O.
Maybe you are looking for
-
What causes a frequent kernel panics and crashes on El Capitan, MacBook Pro 6.1?
In particular with calendar, iTunes, and Time Machine.
-
Tecra S2-112: Startup question
I can't turn on my laptop, after pressing the Start button / stop nothing happens, I need to remove the battery for 5 min he putt back and everything is OK. I try another battery and upgrading the BIOS to version 2.50 but the problem persists. Any su
-
HP A6803W does not start with drive ext
I have a HP with Windows Vista sp2. My ext drive is a Toshiba Canvio 3TO. I can unplug the unit boots fine with it pluged until it will not get past the message. Where is the info I have on it. [Computer]Branded computer: HP-Pavilion, NC890AA - ABA a
-
Change the info-bubble/balloon in the registry
How to modify the registry to make sure the bubble/info-ToolTip for the "My Computer" icon reflects the name of the computer - without actually typing in the "Value data" field of InfoTip?
-
I can't set the HDMI output as default device and I don't get sound from the HDMI output.
I have been all over these forums and the most useful tips I found, I was not yet able to implement. On the reading tab, there is no Audio HDMI option (Yes, I have two disabled devices show as well as the options show disconnected devices checked) is