AE freeze for a while during the passage of Premiere Pro using dynamic linking

Hello

I use Premiere Pro with dynamic links to AE constantly. In this particular computer I had it for 3 months without any problem. A few days ago began almost every time I change first Pro AE (CMD + Tab), a little bit at the beginning and now, a LOT of freezing. It takes several minutes for AE start working again.

Looking at activity monitor the % CPU for AE when this happens is over 100 and often red (not admissible). Time range from 10 seconds to several minutes. I work with this constantly so I have to be able to move quickly from one to the other.

Some details of what I am working with:

OS X Yosemite 10.10.3

iMac (retina 5K, 27 inches, end of 2014)

4 GHz Intel Core i7 processor

32 GB 1600 MHz DDR3 memory

Graphics AMD Radeon R9 M295X 4096 MB

First Pro CC 2014.2 Version 8.2.0 Build (65)

After effects CC 2014.2 Version 13.2.0.49

I tried to uninstall and re-installation of AE, Premiere Pro and Media Encoder (in desperation) and the recommendations of Adobe support I run repair permission to drive on the boot drive, as well as through all the permissions in disk for all the Adobe folders and subfolders... No use, it keeps freezing like I use it. Memory RAM remains a good 20-25 GB when this happens. I'm running out of options.


Any ideas what could be the cause and what I could try to fix it?


Very appreciated

I found the problem. HAVE nothing to do with the files, but with the huge amount of compositions that are related to the time wherever I have reach about 30 or so it starts to slow down.

Solution, keep the compositions related to various projects of the AE. Works like magic again. Thanks for the help anyway!

Enrique

Tags: After Effects

Similar Questions

  • Wheel rotation during the passage of the apps

    Hello

    I frequently meet the spinning wheel during the passage of the apps. For example an app can do one, but open window have not been used for a while and then when I click on the window to use it I get the wheel spinning for a few seconds.

    I am running Yosemite 10.10.5 on a MacPro Mid 2010) with 16 GB of ram and 12 GB available on the 300 GB SSD drive. I just realized that maybe space on the boot drive may be the cause, so I'll empty now and update if there is no change.

    Also, my SSD is a 500 GB Samsung SSD 840 EVO media and I think that the TRIM is not enabled? I read that TRIM was not based with SSDS of third party on my machine and was picking up information contradictory as to the time it was a problem or not. The lack of TRIM could be the cause of the spinning wheel?

    Duane

    You ran a 'cleaning', 'optimize' or 'speed up' apps on your Mac?  Have you installed an antivirus software?

    The 12 GB of free space must be sufficient and not to be the cause of the problem. Don't let him get any small however.

  • HP LaserJet Enterprise 600 m602 slow printing during the passage of the trays

    Hello world!

    On the HP LaserJet Enterprise 600 m602, who met breaks in print jobs during the passage of the trays?  Example, we are going to print invoices and we have a rule configuration that prints on plate 2 with the exception of the last page that is perforated paper tray 3.  So, in a job of 5 pages, pages 1-4 are the tray 2 paper... then page 5 is perforated tray 3.  There is a 2 to 3 seconds when the last page is extracted from tray 3.  If the invoice is only 2 pages, the print job appears super slow.

    This printer was working fine with no delay until we applied the firmware 2302786_433718.  Now, the delay is very noticeable.  We do not know if it was intentional or not in the new firmware.

    We use the latest PCL 5 Universal Print Driver.  The only thing that has changed is the firmware.  We even tried a full reset of firmware.  Problem is still there.

    I worked with HP support, but we were told to wait... the next version of firmware that may or may not fix everything.

    Any help or insight is appreciated.

    We have this same problem with our printer HP Laserjet 600 M602.

    Could solve by setting the Print Mode to all papertypes that are used for the same parameter.  We thought initially can be a problem, issue or firmware of the Board of adjustment, but in reality was the paper type settings. We set up printer for ordinary paper into tray 2 and tray 3, default regular bond has been set at light mode printing and binding for the print mode binding. Each time dial-up printer and trays, he stops to configure different paper type settings.

    Hopefully the other help solve their printing problems

    Enjoy your day,

  • I would like to make my PC opened as in there is no need for a password during the awakening / turn on the PC

    I would like to make my PC opened as in there is no need for a password during the awakening / turn on the computer.        Help, please!

    Thank you

    Hi, Andrew,.

    What version of Windows are you using?

    Press the Windows flag key + R to open the run

    Type control userpasswords2

    Press Ok

    User Tab - uncheck "users must enter a user name and password to use this computer.":

    Tab - Advanced settings uncheck "users must press Ctrl + Alt + Delete.

    Click on apply, Ok

    When the dialog box appears, type your user name and password (if you do not have a password, leave the field blank)

  • How much space do I need to allow for Vista while partitioning the hard drive?

    How much space do I need to allow for Vista while partitioning the hard drive?

    I am installing on a new drive hard and need to partition the hard drive.

    I remember he had a certaing amount allocated for vista and before recovery.

    Help, please!

    Hello

    40GBs is the minimum; who will be vey quickly useless.

    Recovery partition would have been photographed by the manufacturer of the computer hard disk and you can't replicate that.

    You can use all of the hard disk space available to install Vista on.

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • CC in Lightroom on Windows 10 crashes during the passage of the library to develop.

    Everyone has a problem with Frost during the passage of the library to develop modules in Lightroom on Windows 10 CC?

    Hi mgmagney,

    This could be because of the graphics processor.

    Go to the Lightroom preferences > performance > uncheck 'use the graphics processor' > restart Lightroom, and then check out.

    Kind regards

    Claes

  • Photoshop CC was supposed to be able to use without an internet connection if I worked online at least once a month...  I tried to work offline at home after working online for a while. The sign came and said ' no Internet connection /- and the options we

    Photoshop CC was supposed to be able to use without an internet connection if I worked online at least once a month...

    I tried to work offline at home after working online for a while. The sign came and wrote

    «No Internet connection / - and the options have been - try again or continue offline "and I could not work no prob. by choosing «continue in offline mode»

    However, I've used photoshop for a few hours yesterday and I brought my laptop home from my photographer friend to share the work of editing... and I couldn't open Photoshop.

    "The network is not connected TRYagain.

    It was the only option, does not allow me to continue offline...

    You have an idea why I couldn't?

    An Internet connection is required the first time you install and your creative Cloud of license applications.

    You can use the applications in offline mode, but must be online from time to time to validate your software licenses. Please see this link for more details: CC help | Creative cloud / Common Questions

  • I inherited a laptop running Win 7 Enterprise. I've used for a while now and upgrade to Windows Pro 10

    I inherited a laptop running Win 7 Enterprise.  I've used for a while now and upgrade to Windows Pro 10.  I have no problem buying software, but would like to know if there is a way to force an update rather than a clean install, which will let to me having to re - install several months value of applications and the tweaking associated.

    Thank you.

    JLOB

    Try this work around:

    https://www.reddit.com/r/Windows10/comments/3wn9cc/can_someone_with_win_10_home_check_this_for_me/

  • First cc 2014 crash with the message "Adobe Premiere Pro could not find capable video game modules. Please update your video display drivers and start over. »

    I've updated for Premiere Pro CC 2014, all other Adobe CC 2014 software works very well, but the first does not load again. The start page (frame) happens - my computer everything slows down and after a minute or two, it freezes completely and comes up with the message: "Adobe Premiere Pro could not find capable video game modules. Please update your video display drivers and start over. »

    I use a macbook Pro 15 '' (2014) with 16 GB of RAM and 760 GB SSDS. "

    Help, please!

    Hi Brigitte,.

    Go to the following location and rename the folder in the name of old_folder

    User/user/library/Application Support and rename the Adobe folder

    User/Library/Preferences and rename the Adobe folder

    Then, go to the folder Documents and go to Adobe/Premiere pro/8.0 and rename the 8.0 folder

    Make sure that you are in the library of the user if you are not sure to check out the link below.

    Access the hidden user library files. Mac OS 10.7 and later versions

    Kind regards

    Vinay

  • I just want to know how it happened to one of our producer/Editor. It is his story. "She hung the three hard drives to 9 from FCP, has opened the program from Premiere Pro and created a new project file. Then she dragged by season by show .mxf files in th

    I just want to know how it happened to one of our producer/Editor. It is his story. "She hung the three hard drives to 9 from FCP, has opened the program from Premiere Pro and created a new project file. Then she dragged the files, .mxf per season per show in the Premiere Pro project file. To organize additional files in labels and others per show per season, she decided to redo the project file. She highlighted the files on the window of Premiere Pro and click on delete. She then tried to repeat the move but this time, the program could not read the file type extension. One of our Publisher checked raw materials of the external hds but unfortunately the files is no longer there. Our question is how it happened because according to her, there is no prompt that it will be deleted in the external source files. Please help so that we can avoid it in the future. Hoipng for your immediate response. Thank you

    First does not remove the files. The option to delete files from the hard drive only appears when you perform offline files in the first project window.

    The editor is sure that she has deleted the files in the window of Premiere project and not on the hard drive itself?

    >>

    Better is not not to drag but to import or to ingest via Media Browser in the first.

    I'm guessing she files deleted from the hard drive.

  • The horizontal scroll bar on the timeline in Premiere Pro 5.5 disappeared.

    The horizontal scroll bar on the timeline in Premiere Pro 5.5 disappeared.

    Restart your computer, hold down the alt + shift while opening the first up to the Welcome screen.

    See if this will help.

    If not, reinstall and use cleanertool

    Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  • Adobe Story Script does not allow me to integrate the script into Premiere Pro

    Integration with Premiere Pro Adobe story Script does not work I would like to integrate the script

    Goal: Incorporate a Story Script from Adobe in Premiere Pro. (mac)

    Method: I have a video with a text transcript.

    I inport the transcript in Adobe Story and save it in the file extension "Adobe" correct history (.astx)

    I save on the cloud to Adobe, and I also exported it to my office.

    I launch Premiere Pro and import the video that I transcribed.

    The I try one of the 3 ways to get the script of the video in PP.

    The first steps are the same as below:

    I go to Adobe Story and you connect from PP.

    I search for the file.

    I add a scene.

    Make sure that the scene is the same as it is in PP

    then...

    1.

    I drag and drop it on the movie file.

    Nothing appears in the Embed Adobe Story Script Meta Data field.

    2.

    I click on Analyze and the box integrate Adobe Story Script script remains greyed out (impossible to select)

    If I click on analyze then PP will analyze the script (does a decent job) but this isn't what I want.  I want to join the script verbatim in the video, that's why I've transcribed.

    3.

    Right click on the movie file in the PP and the context menu allows me to attach a script.

    I find my .astx file downloaded on my Mac and select it.

    Still nothing appears in the field to incorporate Adobe Story metadata.

    I worked with Anand of support suggested that I have post this question here.

    I don't know if there are only some Adobe models for which it works (IE script of TV, movies etc.)

    He suggested that this would probably work only for the formats .mov file, but then discovered that it should work, even for .mp4 files.

    In any case - if anyone has any ideas, ideas, or has experience with this it would be greatly appreciated.

    Jon

    17 views Tags: first proContent the tag with premiere pro, adobe story scriptContent script adobe story, the story adobe script in first embed tag proContent tag integrate adobe story script in first pro

    Translate

    I followed the below and so that the video above, it worked for me:

    https://forums.Adobe.com/thread/1235896?TSTART=0

  • Stabilize the video in Premiere Pro

    Hello

    I recently shot a music video, downloaded to my PC and it shakes a lot and its not stable at all. Can I quickly stabilize the video in Premiere Pro CS4, if so how?

    I was told that you can do with Photoshop and then import into Premiere Pro that looks like a lot of work. I currently have of Premiere Pro CS4.

    Thank you

    There is a stabilization in AE:

    Source, track and control target (Pro only)

    The Tracker Panel allows you to control all types of tracking movement and stability. In this Panel, you specify your source of movement and the movement of target layer layer, choose the type of monitoring you want to use, and set options for special monitoring. Once you have set all your settings, launch you the follow-up with the buttons to analyze and apply data to follow-up with the button apply.

    Tracker Control Panel

    A. controls to create a new track, set the source query and target b. controls to set the type of monitoring c. controls to start, apply and remove tracks

    In the Panel controls of Tracker, maintain you the layer you want to follow, what you want to use data from monitoring and the layer or effect that you want to apply the follow-up.

    Source Specifies the layer that contains the query that you want to track movement. The menu lists all the layers of moving images in the current composition. If you have selected a source of the query or a checking point effect to a layer before you open the Panel controls of Tracker, After Effects displays the layer source of movement.

    Current track shows the track for the source layer that contains the tracking data. Each layer can have multiple tracks associated with it, allowing you to follow several functions in a layer or follow the same layer using different parameters.

    Proposal target Specifies the images, image sets, or the effect that you want to animate. When selected, the tracker applies the caterpillars of keyframes for the target of query layer specified to animate or to stabilize. Change the target by clicking on change target and choose a new target in the context menu of the layer in the target request dialog box. The Edit target button is not available if the Raw is selected for the Type of track.

    Open Options s the Motion Tracker Options dialog box, through which you can improve the accuracy of tracking and select third-party plug-ins tracker.

    I have not used, so recommend you ask for details in the Forum of the AE. There is a lot you can browse the process. I would just muddy waters.

    Good luck

    Hunt

  • Export of the alpha channel of the AE does not appear correctly when placed on the timeline in Premiere Pro

    I exported the following from After Effects graph and followed the instructions to export using the Lossless + Alpha setting in the render queue. After importing the file to Premiere Pro, it appears correctly in the window of source footage; However, when placed on a sequence (even a sequence created to match the settings of the clamp of the said folder) it displays immediately the transparent gradient incorrectly in the canvas window. I restarted Pr see if it was the result of a file of previous preview when I was exporting from Ae incorrectly. No change. Here's the screen grabs 1) After Effects 2) the window of source footage and 3) the canvas window. Any input would be much appreciated. CC running on MacPro OS X 10.10.5.

    1)Screen Shot 2016-02-26 at 5.34.12 PM.png2)Screen Shot 2016-02-26 at 5.34.39 PM.png

    3)Screen Shot 2016-02-26 at 5.34.54 PM.png

    What it looks like when you turn hardware MPE software?

  • How to install the cs6 Adobe Premiere pro software in the mac machine

    Hello

    I need to install the software Adobe Premiere pro cs6 in the mac machine. can you help me with the download link.

    Thank you

    David

    Please see this link:

    Download Creative Suite 6 applications

    I hope this helps.

    Concerning

    Megha Rawat

Maybe you are looking for

  • HPE pavilliion h8 - 1287c: updated freeze windows 7, printers do not update, updates does not, sleep does not

    I have computor windows desktop 7, pavilliion Hpe h8 - 1287c I think that I got the virus or malware. original installed drivers did not help, but when a driver installed my sleep is not work or light up the Start button? When it restarts it say out

  • How we control the gain of the digitizer PXI-5102 factor?

    Dear Sir, I have a question on the gain settings in the wfmInfo structure that is returned when you use fetch or read functions. Dose it be determined by the digitizer (internal) automatically when you set the attenuation range and vertical probe? Ho

  • window vista to vista ultimate upgrade

    the question I have is my laptop has vista home and I would like to upgrade to vista ultimate, when I update what I lose all my program I have on my laptop? the reason why I'm upgrading is to me, we can not have vista on the computer home this is why

  • Icon lost of blackBerry Smartphones

    I lost the icon text on my home page. How do I ge it back?  Also, I can't drag from one page to another.  This just happened.  Help, please.

  • Unable to connect to the beta program

    Adobe phone and Chat support say they can't help me.Facing problems trying to sign up for the beta program of MuseFinish on an endless loop where I keep getting referred to connect on a page and the other with an error message saying that I am not a