AE is striking a non-imported file and play all other images

Similar Questions

• Anyone know if you can use FTP, when you save, just save the selected file and not all images and cs

  Someone knows If you can use FTP, When you save , just Save the selected file and not all the images et CSS includes ...

  What?  Can you please rephrase your question in order to understand what you're asking?

  If you ask how a file on the remote site via FTP without FTPing any dependent files?  That the answer is Yes, you can do this by changing the SITE > dependent files: option in the PREFERENCES to enable the option "prompt on put/check-in."  The next time you download a file, you will be asked if you want to also download dependent files.  If you say NO and check the don't ask again option, then you will always simply load the file and not the dependents. You can change it back at any time by changing the preferences of this setting.

• "Your drive indicates that a failure may be imminent. Back up all important files and replace your player. »

  I got this error when using my video editing software all in rendering. "Your drive indicates that a failure may be imminent. Back up all important files and replace your player. "I did a backup using Dell Datasafe backup. My warranty is still in effect. What should I do? Ring for a new?

  Hi Williamz101,

  Error Code 2000-0151 indicates a hard drive failure. Please back up all your important data. Hard drive needs to be replaced.

  Thank you & best regards
  Mustapha S
  #iworkfordell

• Last night my operating system not found a set file and reloaded among other Outlook express things - is it possible to recover the address book, folders and emails?

  Last night my operating system not found a set file and reloaded among other Outlook express things - is it possible to recover the address book, folders and emails?

  original title: Outlook Express problem

  Hi John,.

  Try to locate your data from outlook express:

  Click on start-> Run & paste-> %userprofile%\Local Settings\Application Data\Identities

  You will see the folders as {xxxxxx-xxxx-xxx-xx-xxxxxxxxxxxx} click-> Microsoft-> Outlook Express, you should be able to locate the DBX files, these are the outlook database files. Ideally, you should see inbox.dbx, Sent Items.dbx... check the size of the file.

  Now to get it back on outlook express, open outlook express-> click on tools-> Options-> maintenance-> the storage location.

  Click on change location, and then select the location that you have your data in.

  For the address book, see: click Start-> Run and paste the following:

  %USERPROFILE%\Application Data\Microsoft\Address Book

  Address book with wab extension, these should reflect your Outlook Express user name.

  I hope this helps.

• Can I export and collect all the image files in my Muse site?

  Can I export and collect all the image files in my Muse site?

  Hello Peter,.

  Please go to file > export to HTML format and export your site in a folder you want.

  In the same folder, you will be able to see a folder named "Images" that will contain all the images used in the site.

  Kind regards

  Vivek

• How to get all the style of paragraphs and their policies of an indesign file and write all the info with info para in a txt file with scripts

  @

  How to get everyone how to get all the style of paragraphs and their policies of an indesign file and write all the info with info para in a txt file with scriptingstyle and their policies of an indesign file and write all the info with info para in a txt file with scripts

  Hello

  Try this,

  var doc = app.activeDocument,
      pstyles = doc.allParagraphStyles,
      report = "";
  for(var i =0;i
  Kind regards
  Cognet
  		   

• I received a great attachment that keeps appearing in my Inbox in and blocked all other incoming mail. How can I remove it?

  incoming mail problem

  I received a great attachment that keeps appearing in my Inbox in and blocked all other incoming mail.  What can I do?
  What email program are you using? For example, if you use Windows Live Mail and your e-mail server has been Comcast, you go on the Comcast website to check your mail and delete the message here.

• I can delete, change and move all other profiles wireless network but one that reappears immediately after that I erase it.

  I have exactly the same problem in Windows Vista Ultimate Edition.  I can delete, change and move all other profiles wireless network but one that reappears immediately after that I erase it.

  I see that you asked initially that this issue in 2010.  Has there every been a resolution?
  Elliott
  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/network-profile-keeps-reappearing-and-displacing/515108df-1aa6-457f-9262-6be835f82198

  My Eureka has been using netsh, explains Superuser.com «How to completely remove a wireless network from Vista» Everything I found on the Microsoft site doesn't give any examples on how to find profiles (netsh wlan name) or the statement appropriate to remove this profile (netsh wlan dlete name = "the name exactly as shown, case-sensitive quotes". That he solved it for me.

• Batch import files and HTML topics in project

  Hello everyone.

  What I have:

  • 10 of RoboHelp.
  • A highly personalized HTML5 multi-screen layout / profile.
  • Several thousand HTML topics with a tag based (full of subject content such as titles, text and images) is distributed among hundreds of windows folders in a hierarchy.

  What I want to do:

  • Import all these themes in my project without manually add all folders and import of files folder by folder.
  • That in the future, since the new folders and topics are added frequently, and we do not work in Robohelp (we create the files in a text editor because we don't like Robohelp text editor or what he does to the code in the source files).

  I tested the import on a dozen different topics in different folders to make sure that everything works and I'm very happy with the result. As far as I understand it, Robohelp is not aware of the folders/files in your project folder and does not import batch feature. Adding new files manually for each version just isn't an option.

  
  

  Y at - it any How to do what I want? I'm totally willing to write a small program that will modify the files appropriate for me. I don't know what to change to make this happen. I tried to edit files of .fpj in each folder, but which does not include the topic in the generated output. Then I edited the .hhp file, and the subject was included in the last generated output, but have not applied the screen layout. So I know I'm close, but something is missing.

  
  

  I appreciate any idea. Thank you.
  

  Two options.

  1] just to create a copy of the project in Windows Explorer, rename the project and clean.

  [2] recreate the folder structure. For each folder, you can select all the files it contains in a go, you can't import file-by-file. Not sure if you realized that.

  As you found, you cannot import the folder structure.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Questions of import file and folder display

• I am running LR3 on Win 7 x 64. I have a few questions.

  1. I have a hard drive that is assigned to the drive letter "B:\. "Why the import file does not see this disc in the list of drives? I use "other readers" and to travel whenever I want add files to this disk. Other readers, including network drives are very good.
  2. When you import from a main folder and including subfolders, is there a way to filter the files in any way? Never, I want to import web galleries that I made in bridge, for example. These files have very small files JPG, thumbnails and web images. Is it possible to exclude consideration of form, while importers? Is there a way to reveal and display thumbnails with the folder structure? I don't want to have to go to each folder individually when I try to import all the useful images from an entire drive. If LR would show at least the structure of folders to subfolders when you select photos in a top-level folder, that would help. How can I do this?
  3. In the library folders view, how to filter on all the files in one disc? I can select a folder in the disc and see this whole file, but LR does not allow me to select the entire disk. Is there a way to do this?
  4. How can I view the entire folder structure in the laibrary Panel? Some files do not display their top-level folders that they are inside. How to reveal this information?
  5. In the library module, how can I filter on the dimensions of the file? I thought I had seen it, but I do not find that. Sort by the size of the file would also be an option to accomplish what I am trying to do. I need to remove all of the thumbnail images and tiny images of the catalogue. Is there an easy way to do this?

2. in the import from a main folder and including subfolders, is there a way to filter the files in any way?

You can uncheck the checkmarks next to folders in the Destination Panel on the right side of the import dialog box.

3. in the import from a main folder and including subfolders, is there a way to filter the files in any way?

You cannot select the disk, but you can select "All photos" at the top of the left panel. You can also shift-click all the top-level folders under a volume to select them all.

4. How can I view the entire folder structure in the laibrary Panel? Some files do not display their top-level folders that they are inside. How to reveal this information?

Right click on the folder that is currently higher level in your folder pane and select 'Add parents' until you are satisfied with the hierarchy. When you reach the parent level you want, you can click the folder parent for select you all files of a certain drive, as you asked the question #3.

• Lost files and folders, all gone

  yesterday, I installed a new spy software. last night, I shut down my computer. This morning, I turned on my computer and it says "configuering desktop. I waited until it ends and when he was done, a new released office and all my files and folders disappeared. I checked in the usual places and nothing is there. I went to restore and there is no backups when needed. all my favorites have disappeared as well. I'm crazy as to where everything is and how reterive my files. URGENT, PLEASE HELP.
  eskaysmith

  Hello

  What was the name of the program that you have installed?

  Log on as an ADMINISTRATOR - check the C:\Users\your old username to see if the files are still there.
  (or any drive records were on for example D :)

  Try these to erase corruption in the case where it plays a role.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then do-, use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK
  then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the
  same for other accounts that may be difficult. Then if necessary you can also reset your password
  in the accounts. Do not forget to leave your Admin account and the other to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I open a .bat file in wordpad by mistake and saved as a .txt file and on all bat files the icon became a txt icon

  I opened a .bat file in wordpad by mistake and saved as a txt file and icon on all files bat transformed into an icon of txt. So I can't run bat files either. Simply open wordpad all the time. How can I activate this return?

  I also received a reply from a friend before subsequently I tried method 2. He found this site: http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html

  Its almost the same thing but U don't need to go into the many catalogs.

  Just download the Default_BAT.reg and run it. And restart the computer, and it works again. http://www.SevenForums.com/attachments/tutorials/168956d1312706042-default-file-type-associations-restore-default_bat.reg

  Thanks to everyone who answered my question.

  Concerning the SwedenDanny Pentecost

  I also received a reply from a friend before subsequently I tried method 2. He found this site: http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html

  Its almost the same thing but U don't need to go into the many catalogs.

  Just download the Default_BAT.reg and run it. And restart the computer, and it works again. http://www.SevenForums.com/attachments/tutorials/168956d1312706042-default-file-type-associations-restore-default_bat.reg

  Thanks to everyone who answered my question.

  Concerning the SwedenDanny Pentecost

• How to share a link to a file and have the other person to download the file without having to add them explicitly as a member, as does dropbox?

  With Dropbox, I right click on a file in my designated Dropbox folder and choose sharing link Dropbox.  This operation copies a single URL that I can send to anyone then download this file and this file only.  I didn't add people to my access list to allow the download.

  How do I do this with Oracle Documents?  I have an out of the large files that I prefer not to send by e-mail, however, I won't add everyone in society as a member to access my list.

  There is an option called public links that allows you to do. Select your article and click on share. This throws a pop up dialog box. On the left side of the dialog box, you can have 3 options - members, links, public links. If links Public option no there is not, then your service administrator has rejected their use. Links Public option is controversial in the enterprise space. Initial offering of DropBox didn't hesitate to the provision of the public links because the content was guaranteed to be owned by the user to dropbox. However, at the level of the company, the content belongs to the company owner, so service administrators can choose not to allow this feature. It's down to your organization.

  If you see the Public links option, click it and the right side of the pop-up dialog box will change. You can specify:

  • a name for each link you create (so you can keep track of what link is which).
  • Link permissions, only the following are available for obvious reasons - Viewer, Downloader, contributor
  • Link the Date of expiry - date after which the link does not work
  • Access - code an access code which you may disclose to the recipient expected by other means of your choice. This access code guarantees security on a link that could otherwise be used by anyone

  You can create several public links to the same article, and each of them may have the settings above, then you might have a link to downloaders and a separate link for contributors, for example. Each link can then be sent, either by copy/paste via the email button to the right of the link. You can also change the link using the pencil icon, so you it unexpire or reset the expiration date. You can also remove a link by using the trash beside him.

  I hope that explains the function public link.

  Kind regards

  Frank.

• When you transfer large files of network, all other requests are not sent to the server

  In our application, we are facing a weird scenario where we try to download a huge file(600+ MB) of the network, all other requests (AJAX) are getting blocked. But when the same file is downloaded from the local location (drive E) so that everything works fine.

  How do you download the file via the network?

  If you want to solve the bandwidth? and the nets where a process takes previous on the other, you will have to troubleshoot the QoS of the network on what see you.

  To give a better visual, please, use Firebug or Web Developer tool, called network analysis applications. The "XMLHttpRequest" will give better clues for Ajax. Reference http://ajaxian.com/archives/ajax-debugging-with-firebug

  There may be a topic: configuration option that allows persistent connections per server, you can check mutithreading or max.

• I don't see my external hard drive under my computer. It works as a plug-and-play on other PCs

  The model number is WD2500ME-01 and it is usually a plug-and-play intstallation

  Hello

  • If it works well before?
  • What were the changes made before the issue occur?
   
  You can check this link:
   
  Advanced troubleshooting tips for General USB for Windows XP problems
   
  http://support.Microsoft.com/kb/310575
   
  You can also check this link:
  http://support.Microsoft.com/mats/hardware_device_problems/en-us