AEBS with you watching TV

Hello

I currently have a 5th gen AirPort Extreme as my router, attached to a modem in Bridge mode talk talk. Really satisfied with this set upward, up to discover you receive it (IPTV) boost channels cannot be read. After searching for solutions, it seems that this generation of base station does not have IGMP. / multicast (not that I know what it is!)

Some people have suggested to others that the router of talk talk should have disabled the bridge mode, wifi and plug her you display box; then AEBS in Bridge mode. I'm really reluctant to change my current set up. My questions are

1. the AEBS would still broadcast wifi as it does now. My speed is done?

2 what other parameters that need to be changed: PPPOE etc. ?

3. the internet cable would go to AEBS first, then that then connects to talk talk router Via LAN?

.. .and finally I wonder is - everything with it to get the Disney channel!

any ideas would be welcome

Thank you

Unfortunately, Apple doesn't limit the advanced features on their routers... It is built to the walled garden of Apple, where everything is apple so you would be using itunes store... (and pay the money to Apple).

There is nothing wrong to put the modem in router mode... I guess that the vast majority of the people in the world use this type of installation.

1. the AEBS would still broadcast wifi as it does now. My speed is done?

Your AE delivers not just the wireless and speed are not affected. There is nothing wrong with keeping the wifi on the router of talk talk so... because in the bridge, you lose a function... Comments wireless.

2 what other parameters that need to be changed: PPPOE etc. ?

The Internet tab will change from DHCP to PPPOE.

The wireless tab remains unchanged.

The network tab will change to Off (bridge mode).

I list these things that enter you through the edit it on the airport... utility, but there is a good chance that you will need to reset the AE to the factory as some changes will be rejected if you start from existing router mode.

3. the internet cable would go to AEBS first, then that then connects to talk talk router Via LAN?

The internet would go to the router of talk talk.

You plug the AEBS in through ethernet. Talk talk to WAN LAN (or LAN, it isn't grave once configured) on the AEBS.

Before you begin, you can export your current setup via airport utility. The top under File menu.

Tags: Wireless

Similar Questions

  • do you need to always have your iPhone with you when you wear the watch?

    do you need to always have your iPhone with you when you wear the watch?

    Answer brief No.. The watch can do many things with the phone. If you have the 2nit series has built in GPS so it can follow, see this.

    How to use your Apple Watch without your iPhone in the vicinity - Apple Support

  • You can swim or shower with the watch

    You can swim or shower with the watch?

    Hello

    Non - Apple advises that you perform one of the people.

    Apple Watch is splash and resistant to water, but it is not waterproof. You can, for example, wear and use Apple Watch during the year, in the rain and all washing their hands. Overwhelming Apple Watch, however, is not recommended. The watch must also be dry if it is wet.

    Apple advises specifically, for example, the following can affect Apple Watch water resistance and should be avoided:

    • Exposing Apple Watch into water under pressure, including under the shower.
    • Swim or bathe with Apple Watch.
    • Overwhelming Apple Watch in water for long periods of time.
    • Apple Watch port in the sauna or the hammam room.

    Water resistance is not a permanent state, and Apple Watch cannot be rechecked or closed for resistance to water.

    More information:

    On the resistance to water Apple Watch - Apple Support

  • Pairing Bluetooth headset with Apple Watch 2 series?

    Hoping that someone here has some good ideas, so I can avoid having to go through the centre commercial/Apple Store!

    Bought a watch series 2 the day of the launch, immediately tried to pair with the bluetooth headphoens I got (AvierBTE somethings). No luck. Thought maybe I just got bad headphones - but they always associate with my iphone 6 s. bought a pair of Mswift Pow helmet off Amazon and bluetooth headset at the same time borrowed a friend this pair with its original Apple Watch. My Mswifts, or his headphones will pair with my watch, although the two pair with my iphone.

    My watch IS pair with my amazon echo - so I know the bluetooth works.

    The watch is the headset in discovery mode, but when I try to pair, it gives an error and says it cannot associate, check that the camera is turned on, in range, etc..

    Another person had problems of this kind and has managed to find a solution?

    Hello

    Make sure that you follow the instructions for pairing here:

    Use the Bluetooth with your Apple Watch - Apple Support Accessories

    It can help to turn off pairing your headphones for your iPhone (or any other device that they can already be coupled to) before their pairing at your watch.

    It can also help when you try to pair your headset with your watch, to move the two devices to another place, away from any device Bluetooth can be active.

  • I still have to type my password after I enabled unlocking with Apple Watch.

    Well, I did everything correctly. Or at least I think. But for some reason, my mac still asks me a password to unlock. As I opened the cover, I get the message "Unlock with Apple Watch". But he invites me just after my password.

    Did someone else faced with something similar or is that what I'm doing wrong?

    Thank you

    Sahit Anand

    I have the same question.

    I filled all the criteria and even turned off the FileVault nothing helps. The MacBook Pro (with OS Sierra end 2013) seems to want to "" be unlocked, but the watch (1st generation with OS 3) shows absolutely no sign of communication with the Mac. All devices are on the same wifi and Bluetooth is turned on.

    I give up!

  • 2SV v. 2FA for Auto unlock with Apple Watch

    Try to set up the auto unlock with Apple Watch on my MacBook Air (fall 2013) after the installation of Sierra. Get this message:

    Off the 2SV using applied.apple.com

    ... and still get the same message "2FA is required" box "Security & Privacy".

    What I am doing wrong?

    P.S., rescue email Apple ID has not yet been verified, because it belongs to my sister who lives in a very different time zone, but I don't see how this should matter for the automatic implementation of release.

    The message is mainly to tell you that you must enable two-factor authentication, is not that you should disable 2SV. You will need to disable 2SV before you can activate 2FA.

    You should always activate 2FA it to AppleID.apple.com

    I don't know why you don't see the option to activate 2FA here on the Security section. You have a device running El Capitan or later, or a device running iOS 9 or a later version in your list of devices?

    For Apple ID - Apple Support two-factor authentication

  • Auto unlock with Apple Watch does not

    Hello

    I followed all the instructions and advice of all Web sites without success, my watch is on my wrist, unlocked and the Mac cannot communicate with the watch, or when he's on the odd occasion that the watch is not open the Mac, I still have my password.  I have not matched and repaired the watch, and the new registered in iCloud, transfer off and on again, the watch, the 6s iPhone and watch are all connected to the same network still with no luck.  This should be an ongoing and easy process as most of the functions of apple, but it just doesn't work and it is the function that I was more enthusiastic in this upgrade of the software, feels a bit like false advertising if it's this hard to operate.  Can apple be solve this problem or can help a tech guru

    If the problem is that when you check the box "Allow your Apple Watch unlock your Mac" in security pref pane it breaks down and said that one cannot communicate with your watch?

    You have Bluetooth and Wi - Fi enabled?  If so, try to restart your Mac, iPhone and look, and check the box again.  Also sometimes if you just wait a few hours and try to check the new it will finally work.

  • Auto unlock with Apple Watch does not appear in my window security and confidentiality

    "Disable the automatic connection' or Auto unlock with Apple Watch" appears in my window security and confidentiality

    Hello

    Automatic unlocking with Apple Watch is available for the Mac models since the mid-2013 and later running macOS Sierra.

    Check that:

    • Your Mac has Bluetooth and Wi - Fi enabled.
    • Your Apple ID use two factor authentication (as opposed to the two-step verification):
    • Your Mac and Apple Watch are connected to iCloud with the same Apple ID:
      • On your Mac, choose Apple () menu > System Preferences, and then click iCloud.
      • On your iPhone, open the Apple Watch app, then go to general > Apple ID.
    • Your Apple Watch uses a password:
      • On your iPhone, open the Apple Watch app, then type the access code.
    • Transfer procedure is enabled on your iPhone and your Mac:
      • On your iPhone, go to: settings > general > transfer procedure.
      • On your Mac, go to: System preferences > General - down, tick the option "Allow transfer between the Mac and your iCloud devices."
      • If these parameters are already enabled, a user has found that it helped to deactivate and reactivate the procedure of transfer on their iPhone.

    More information:

    Automatically unlock your Mac with your Apple Watch - Apple Support

  • Unlock with Apple Watch does not

    Hello

    I'm running a MacBook Air mid-2013 with macOS Sierra, with a 2nd Gen Apple Watch watchOS3 running. I'm on the same Apple for my Air ID, see and iPhone (6 s).

    But unlock with Apple Watch does not work on my Air. I activated 2 factor authentication. I checked the box that allows to unlock with Apple Watch. Everything seems to be kosher.

    When I close and reopen my Air, "Unlock with Apple Watch" appears for about 10 seconds, and then I type my password.

    Help? Thank you!

    I also have this problem. I have 2 accounts on my Macbook. One is the first account that I don't use, second my regular account. On my Second account, it of the same problem, but with the Admin account... It works.

    I Don t know why.

    Do you use also two accounts?

  • No "Unlock mac with Apple Watch"

    My mac has been updated the latest macOS, but I do not see the box to release the mac with an Apple Watch. I've enabled authentication in two steps. What could be the problem?

    Make sure that you support Mac here: macOS Sierra: unlock your Mac with Apple Watch

    Not all the features of Sierra are available on all Sierra supported Mac models.

  • Unlock Mac Pro with Apple Watch

    I just downloaded the new OS of Sierra and have the newest OS on my iPhone and watch.  I tried to set up to where I can unlock my Mac with my watch, but can't seem to understand. Everything I read said I should check the box that says allow your Apple Watch to unlock your Mac. in respect of the security and confidentiality under general. Only problem is that I can't find such a thing anywhere... Any suggestion would be great.

    You're supposed to open preferences system (on your MacBook), go to Security & Privacy and then check the box that says "allow your Apple Watch to unlock your Mac". And it has not worked for you?

    Is your Apple Watch under the same Apple ID as your MacBook? If not, this is why it does not work. Otherwise... I don't really know.

    MacRumours article is useful because it has pictures with her: http://www.macrumors.com/how-to/macos-sierra-apple-watch-unlock/

  • Automatic unlocking with Apple Watch active but expire

    I've activated automatic unlocking on my Mac (Macbook Air 6.1) successfully, I had my first gen Apple Watch upgraded to watch OS 3 and when I opened my Macbook, it says «Unlock with Apple Watch...» ». After a few seconds, however, I get a spinny wheel thought and then it expires and I get the password prompt. I tried to restart my Mac and my watch, but don't know what else to do here?

    As far as I know I have everything set up properly - 2-factor authentication, the right operating system, the hardware supports, but it just times out. Anyone have any idea why this could be or a potential solution?

    Seems that you have all your ducks in a row, but check the instructions here > http://www.cultofmac.com/441405/how-to-use-apple-watch-to-unlock-your-mac-in-mac os-sierra /

  • Nexus 5 on Marshmallow 6.0 crashes when you watch movies in Firefox.

    After the upgrade to 6.0, Firefox Marshmallow Let's my nexus 5 crash when you watch a movie. Seen on different sites.
    He begins to stutter, then freezes after the phone reboots.
    Front on Lollipop, it was fine.
    There is no problem on the same site in chrome.

    We have a new version of Firefox for Android with a fix for the restart of Marshmallow (Android 6.0) on the media playback. https://www.Mozilla.org/en-us/Firefox/Android/42.0.1/releasenotes/

  • When you watch a video on Facebook, etc., the video part freezes and the sound continues to play until I have spend on them... Same video works fine on Chrome?

    When you watch a video on Facebook, etc., the video part freezes and the sound continues to play until I have to go over it. I use Wuindows 7. The video will restart when I pass this pointer/mouse.
    The same video (s) works correctly when you use Chrome?

    This issue may be caused by malicious software.

    Make a check of malware with several malware scanning of programs on the Windows computer.
    Please scan with all programs, because each program detects a different malicious program.
    All of these programs have free versions.

    Make sure that you update each program to get the latest version of their databases before scanning.

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

    See also:

  • When you watch youtube on Waterfox 8.0.1 is no buffer.

    When you watch Youtube on Waterfox 8.0.1 videos there is no buffer.
    Load videos, but not with the buffer (obvious when the video is paused).
    I'm using Flash Player 11.2.202.95 Beta 2 (Non - IE) 64-bit
    Works fine on IE9 with Flash Player 11.2.202.95 Beta 2 (for IE) 64-bit

    Try Waterfox support.

Maybe you are looking for

  • HP ENVY 15-ae103no laptop: want damaged display, yellowish stains

    Hello I recently bought my computer, I noticed a spot yellowish on the screen when something dark is displayed. Now, he has started to grow. I look like this http://imgur.com/UCCiKPs I think it's something that puts pressure on the screen or somethin

  • [Microsoft] [ODBC driver manager] Data Source name not found and no driver by default specified

    Hi team, I am trying to connect to the Oracle 9i database using VB code below: strConnection = "Driver = {Microsoft ODBC for Oracle};" Server = SERVERNAME; UID = username; Pwd = PASSWORD"Connect = New ADODB. ConnectionConnect.Open (strConnection) The

  • help Acer and argos is expensive

    Hello. Just visited Argos showroom to see if the keyboard screen can have ' accept/back/tick' icon returned, because I can't access a website address. Said to continue by phone line Acer, but this line is too expensive for me, so I want online help.

  • PSC 2355 printer error codes

    I tried many remedies for this problem: I receive error on the small screen codes: When it is plugged into the USB port, the error is ' Error: 0xb90000d9 '. =============== "165: hw_interrupt_hwv2.c. When the printer is standing alone and not plugged

  • redirection of IP in FWSM in routed mode.

    How can I enable IP forwarding in FWSM? When I hear the traffic from a single interface needs to be redirected to another device in the same interface his past does not in the normal scenario. Redirection is supported in routed mode?