AF:treeTable question on display with specific level

Similar Questions

• How can I set a few seconds from the beach to the specific level of db?

  Hi all, I'm new to this software,

  I want to know how can I put a few seconds from the beach to the specific level of db?

  For example, I just want the maximum dB higher and the low dB to be only 3.

  the sound is more concentrated.

  How can I do?

  

  Ah, you mean compression. There are several tools in hearing that, and one to use depends on the source material. If it is spoken word, then you can use dynamic processing tool (the original), the single band compressor or, possibly, the leveller speech volume to achieve this goal. If it's music, then the multiband compressor is rather sweet.

  But with each of them, there is something important, you should firstly to your track, and it is to normalize it to 0 dB using Effects > Amplitude and Compression > Normalize. You should do this because all compressor settings are associated with a full range signal (i.e., 0 dB) to treat. If you do not do this, none of the controls will make sense. On your screen that you've expanded the display to make it much larger than it should be, then you might want to get back to normal, otherwise you will not see clearly what is happening. Hearing can artificially display any amplitude of the signal at all, due to floating-point processing system internal use, but in the real world, the audio device cannot handle more than 0 dB, please make sure that the signals exceed this.

• I'm looking for a simple list of available applications with different levels of creative cloud subscriptions?

  Boy, the Adobe web site is incredibly frustrating. It is very difficult to accomplish some very simple tasks. First of all, there should be an email address for contact. I shouldn't be forced to submit my question on a forum. It's cheap and lazy on the part of Adobe, especially when they charge a lot for their subscription applications.

  My biggest complaint is that I can't find a simple list of the applications available with the cloud creative in different subscription levels. When I search, it sends me to a video of slick 'overview' of the creative cloud which tells me zero in on specific applications available. It should be a simple list of available with creative cloud applications and a side-by-side comparison of the applications available with the different levels of subscription creative cloud. Why can't I find something like this on the web site of Adobe? I found a page that lists 15 adobe applications, but not a page that describes to me what apps come with what levels of creative cloud subscriptions.

  There are only 3 shots of cloud. Inclusions are the same for both commercial or student.

  All applications

  Desktop: desktop applications Adobe Creative Cloud | Adobe Creative Cloud

  Mobile applications: Adobe mobile, iPhone, iPad, Android apps | Adobe Creative Cloud

  Same info differently formatted: Adobe CC 2015 Direct Download Links: Creative Cloud 2015 Release | ProDesignTools

  Plan of photography: Photoshop + Lightroom

  Single App plans (applications available for the unique implementation plans are in the drop-down menu on the page of the plans of cloud)

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• Question in cooperation with af:iterator and by program (add and delete records using the list)

  In our application, we try to add and delete records within a one: iterator lie to the backing bean list table.

  According to the feature remove should not fire any validation form so we are settign Remove button including the immediate property. And add can throw validation before adding a new record.

  Here the problem comes with button Delete with activated immeidate.  The deletions list action recording is removed from the collection list at the beacking bean, but after that the interface iterator partial page refresh user displays with bad Recordset. Some how instead of getting the last recordings of server of the user interface displays the previous local values for input components.

  For example: if I have 5 files in the list and delete record 2nd of collection. Backing bean (server side) the 2nd record is perfectly removal of list collection.

  On the user interface, the iterator 4 records are displayed as the size of the list is 4, but instead of 2nd record the last record is not rendered. According to my understanding, as deleting comme la suppression touche key is set immediately then the some how these recordings (genereted the Id of component runtime inside the i1: 0:it1 etc...) Apply request vandekerckhove is not updated gettign, Hene showing the old local values inplace of these components of entry and this behavior is only for input components.

  Can you suggest me a solution more come to the question above. Delete with immediate should unregister correspondent and only the record deleted if pannals UI.

  JSFF code

  <af:panelGroupLayout id="pgl1" binding="#{viewScope.formBB.mainPGL}">
          <af:iterator id="i1" value="#{viewScope.formBB.allEmployees}"
                       var="emp" rows="0" varStatus="vs"
                       binding="#{viewScope.formBB.iteratorBinding}">
            <af:panelFormLayout id="pfl1" maxColumns="4" rows="1" labelAlignment="top">
              <!--<af:outputText value="#{vs.index}" id="ot1"/>-->
              <af:inputText label="First Name" id="it1" value="#{emp.firstName}"
                            autoSubmit="true" required="true"/>
              <af:inputText label="Last Name" id="inputText1"
                            value="#{emp.lastName}" autoSubmit="true"
                            required="true"/>
              <af:commandImageLink text="Delete" id="cil1"
                                   immediate="true"
                                   actionListener="#{viewScope.formBB.deleteEmployee}">
                <f:attribute name="index" value="#{vs.index}"/>
              </af:commandImageLink>
            </af:panelFormLayout>
          </af:iterator>
          <af:commandButton text="Add New Employee" id="cb1"
                            actionListener="#{viewScope.formBB.addNewEmployee}"/>
          <af:spacer width="10" height="10" id="s1"/>
  </af:panelGroupLayout>
  

  Delete the Action listener for the bean

  private List <Employee> allEmployees;
  public List getAllEmployees() {
          return allEmployees;
      }
      
  public void deleteEmployee(ActionEvent actionEvent) {
          int index = (Integer) actionEvent.getComponent().getAttributes().get("index");
          if(allEmployees != null && allEmployees.get(index) != null) {
              System.out.println("Emploeye Name:" + allEmployees.get(index).getFirstName());
              allEmployees.remove(index);
          }
          //AdfFacesContext.getCurrentInstance().addPartialTarget(mainPGL);
          AdfFacesContext.getCurrentInstance().addPartialTarget(iteratorBinding);
              
      }
  public void addNewEmployee(ActionEvent actionEvent) {       
          Employee addE = new Employee();
          if(allEmployees != null) {
              allEmployees.add(addE);
          }
          else {
              allEmployees = new ArrayList <Employee>();
              allEmployees.add(addE);
          }
          AdfFacesContext.getCurrentInstance().addPartialTarget(mainPGL);     
      }
  

  Jdev version - Build JDEVADF_11.1.1.7.0_GENERIC_130226.1400.6493

  POC Application - https://drive.google.com/file/d/0BysBrGAsXoo0Qjh3VGkzZkRGck0/view?usp=downalod

  Help, please.

  You probably need to reset submitted values.

  For this, you can use this util class: ResetUtils (reference Java APIs for Oracle ADF Faces)

  For example: ResetUtils.reset (iteratorBinding);

  BTW, you should never bind components to bean managed with a scope greater than the scope of the request.

  Dario

• Problem with the levels in PSE7 adjustment layer

  Hello

  I have a problem with the levels adjustment layer in PSE 7.0. I made this photo that shows exactly as I want it in PSD format, but when I save it in JPG format all adjustment layers are lost. I tried to get the same result by using simple Enhance > > adjustments > > levels, but I cannot get the same result with the same settings as with the adjustment layer.

  How can I solve this?

  I saw in a tutorial that might help add a new layer above the layer of setting and then merge visible layers, but it does not work either.

  I hope someone can help me if I can complete the picture.

  It seems that the problem is that your image size is big enough in comparison to the size of your available screen and you make your settings at roughly 18% view.

  Photoshop elements uses interpolation to show the images on the screen, so you can't really see exactly the result unless you view an image at 100% display (actual pixels)

  If you try to do the steps from the beginning with your image at 100% view, does make a difference?

  (Double-click on the Zoom tool in the Toolbox for 100% view (actual pixels))

• How can I use an anchor to display a specific to a widget panel?

  I would like to use a hyperlink to a page to display a specific to another page Panel. I don't have 'a bit' of work when I put the anchor on the tab of the Panel widget presentation I want displayed, but it also scrolls the page down to this tab, which hid half of the page. Can be confusing for users, as it was confusing to me. I then moved to the top of the widget panel, who did not work at all - unless I clicked on the tab of the Panel. Then it scrolls the page to the point where the anchor was placed. Not cool.

  Is it possible to set an anchor to a page and display a specific panel in a widget without scrolling the page? Or another way to set the page in the widget (if you use not an anchor point) to direct the user to this page in the widget? What I hope is that I can place the anchors of panels of the widget on the page (and not to let the page display) or use another method to hold the users to whom the page & panel without using anchors.

  I could, I suppose, move content into separate pages and panels, but I don't want to cry "Uncle" immediately.

  Suggestions? Solutions? My inquiring mind wants to know!

  I fear that it is not possible at this time to Muse. I would recommend that you add to the ideas here, section http://forums.adobe.com/community/muse/ideas

  Solution: Create different pages, each with a panel tabs containing a different first tab and then bind hyperlinks to the appropriate page.

  - Abhishek Maurya

• How to setting directory to display with the FileReference class

  Hello world

  I would like to know if it is possible to set the directory (path) that is displayed when you use the FleReference class to select a file from the file system: when I click on the Browse button, I want to display a specific file system directory.

  Thanks a lot for any suspicion

  Greetings

  Hello

  With fileference, you will not be able to access on the directory by FileReference.Browse () structure, you can open/load a file but the security sandbox will not you use the information in path of the flex application.

  David

• Develop a specific level of a multi level Advanced DataGrid

  I have an Advanced DataGrid (ADG) that displays three levels - we'll call it 'Parent', 'Child' and 'Child Detail' - using a HierarchicalData collection which is built from XML from a Web service (see attached code).
  
  The ADG is generated as I do, and I'm able to develop all levels, as well as reduce all levels using the expandAll() and collapseAll() methods.
  
  However, by default, I want the grid to display with the first level ("Parent") as the only open level. I can't find a way to do this, using existing properties and methods of the ADG class.
  
  Does anyone have any suggestions?

  Don't know not if anyone out there cares, but I found a better way to do it. I was forced to find a new way since FB3 Beta2 no longer supports the 'openItems' mx.controls.AdvancedDataGrid property. See code attached for the solution.

  Notes:

  'This' is the ADG as a Flex component

• Only the Inbox displayed, with no menu for other areas such as "sent".

  Only INBOX menu, displayed with no menu for SENT, DRAFTS etc. on the left flank and with the FILE EDIT etc missing high.

  Hope you can help.

  All the best,

  Stan

  Features universal key to display the hidden menus bars is alt or F10. After that the display of the menu bar select View-Toolbars and rekindle the missing toolbars.

  Then in the menu bar select View-presentation-folder pane to rekindle that.

• rMbp mid-2014, external display with the quality of the retina

  Hello!

  I buy a Dell 24 "external display to connect to my rMBP with QHD (2 560 x 1 440) resolution.

  http://www1.euro.Dell.com/content/products/ProductDetails.aspx/Dell-u2515h-monit or? c = en & l = en & s = dhs & cs = frdhs1

  I have connected the screen to my mbp with the mini display / port cable supplied with the display screen. It works well, but I don't have quality of retina at all (the images seems good but the text is terrible)

  The text have a bad record as a retina screen, and it makes a big difference when I spend my retina display to the external display which is not comfortable at all.

  I though that this kind of screen was OK to view the retina... but I was wrong. I try to connect with minidisplay / display and HDMI! HDMI made was worse than minidisplay. The res in the system report show was good 2 560 x 1 440. I even try the hack to force with the patch, but always bad RGB render text...

  More important, I want to, it's having the same record as retina on the text and images. What external display can be good for this?

  My budget is 450-€500

  Thank you

  The size in pixels of the screen is not mean much: a small display to 2560 x 1440 pixels seems much sharper than a widescreen 2560 x 1440 pixels.

  Your retina Macbook has something like 220 dpi (DPI in English), the Dell screen only 117. If you want the same sharpness, you will need to choose a display with 220 dpi. But then, everything on the screen will look much smaller. Here is a tool that allows you to get the idea: http://dpi.lv/

• Sometimes a web page is displayed with only text and no picures. It is not always the same site and is not always the case. If I'm going to explore for the same website that always works

  Sometimes a web page is displayed with only text and no picures. It is not always the same site and is not always the case. If I'm going to explore for the same website that always works

  Hello

  Also try a Ctrl + F5 refresh. This allows to bring the content of the page again.

• 800 Mini G2 EliteDesk: Dual 4K displays with EliteDesk 800 Mini G2?

  I have an EliteDesk 800 Mini G2 with the i5 - 6500T CPU and integrated graphics card Intel 530. There are also two DisplayPort connectors. As the title says, I tried to find out if the device supports two monitors 4K 3840 x 2160 @ 60 MHz. The specs seem to suggest that it would work. I'm confirming without having 2 K 4 monitors on site. Anyone know or have experience with a configuration like that?

  The i5 - 6500t supports up to 3 screens to 4096 x 2304 @60 Hz

  http://Ark.Intel.com/products/88183/Intel-Core-i5-6500T-processor-6M-cache-up-to-3_10-GHz

  Implementation of multiple 4K displays with your EliteDesk 800 Mini G2 will work. Your EliteDesk Mini supports up to three displays to the right of the box. I suggest using the displayport output ports.

  http://www.Intel.com/content/www/us/en/support/graphics-drivers/000005580.html

• Apple Cinema Display with old Mac

  Hello! I was wondering, I have an apple Cinema Display with the famous ADC video plug. I also have a couple of old Mac without a monitor, for example a performa 6360 Powermac 6100 and Macintosh iicx and Iisi. Y at - it a video adapter to use the movie with these old Mac screen? is this possible?

  Thanks in advance!

  The main obstacle is that a screen ADC must get its power through an ADC port on the computer. The old Mac you list can only the power of their old school connectors.

  I remember this adapter:

  http://www.eBay.com/ITM/Apple-Mac-A1006-DVI-to-ADC-adapter-cord-for-cinema-monit 221995991474 or-display-EMC-1918? hash = i...

  be needed to power a monitor ADC to an ADC not Mac, but I would feel much better if another old graybeard archived to check my aging memory. You still need an adapter to convert the DVI on the adapter port 15 pin Apple old Mac. Some 6100 s required a special just HDI15-to-DB15 adapter to use a normal Apple display that would have been contemporary the 6100:

  

• Cannot update the display with v.156.16 on the Satellite A100-599 Vista nVidia Driver

  I have Windows Vista Ultimate Edition in Satellite A 100-599. Update NVidia display with 156.16 version driver is not possible. A fact Vista Ultimate 32

  bit.

  Any solution to this problem?

  Thank you.

  Hello Kerim

  Can you please tell me what happening exactly when you try to install NVIDIA Driver 7.15.11.56.16 version. ?

  Do you have problems with the display only driver?