After a delayed start, several times I get the error message: "the server does not currently. Have you tried regular recommendations.

Similar Questions

• If I try and open an email with an attachment I get an error message: this file does not have a program associated with it for performing this action.

  If I try and open an email with an attachment I get an error message: this file does not have a program associated with it for performing this action. create an association in the folders option control panel.  Once there, I don't know where to go

  What is the attachment file extension? If you know what program should open with, just do the following.
   
  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: The appropriate program.
  6. check: always use the selected program to open this type of file.
  7. click on OK.
   
  This should allow you to open these attachments directly from email address now.

• I get this error message and Firefox does not start... EXC in ev handl: error: error definition property on NPObject!

  Firefox does not start and this message keeps coming back... I uninstalled and reinstalled... but nothing helped...

  EXC in ev handl: error: error definition property on NPObject!

  Disable the extension "McAfee Site Advisor" who has just updated 3.4.0 that probably out of block of addons list.

  • 'Ctrl + Shift + A' > find McAfee Site Advisor and use 'Disable', and then restart Firefox.
  • Do a Google search without problem
  • It seems that if you re - enable new Site Advisor and restart Firefox you agree. At least you know where to look if you get the error again, or research on Google to slow down.

• get an error message Windows install does not. What can I do?

  Whenever I try to download a game or itunes, I get the Windows error message install does not. I don't know what someone can help me.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the Windows Installer service
  1. Click Start, type Services.msc and press {ENTER}
  2. double-click on Windows Installer
  3. set the Windows Installer to Manual startup type
  4. Click Start to start the service. Note the error message, if any.
  5. click on OK.
   
  Method 2: Unregister and re-register Windows Installer to follow the steps below.
   
  1. click on start, run, type MSIEXEC /Unregister. and then click OK. Even if you
  This correctly, it may seem that nothing is happening.
  2. click on start, run, type MSIEXEC/REGSERVER, and then click OK. Even if you
  This correctly, it may seem that nothing happens, or you can briefly see an hourglass.
  After you run this command, the operation is complete.
  3. try your application based on Windows Installer again.
   
  Method 3: Try the SFC scan on the computer:

  http://support.Microsoft.com/kb/929833

  It will be useful.

• the last two days, I get an error message and Firefox does not open. I'm on 9.0

  The last two days, Firefox will not load. I get an error screen. I'm on 9.0

  Thanks for the help. All is well in Tennessee!

  Gary

• I just upgraded to 4.4 and begun to use LR for the first time. I have a canon 70 d, but when I import SD card, I get an error message that LR does not recognize the files and a number of 241.

  How do LR to import my files on my SD card because it keeps telling me that it doesn't recognize the files. I have a 70 d canine and shoot in RAW and JPEG. The videos are imported but not the photos.

  Since a 70 d Canon RAW photos can be imported directly into Lightroom 4.4. You need version 5.2 or newer to do this.

  As an alternative, you can download and install the FREE Adobe DNG Converter and then use it to convert your RAW to DNG, and then import the DNG in Lightroom 4.4.

• I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  Ideas: I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  • Pragrams you have problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• When I start my computer, I get an error message «Error loading C:\Users\jimhoss\AppData\Local\Temp\...» »

  When I start my computer, I get three error messages concerning three different files.  They all have the same path and they all say
  "Error loading C:\Users\jimhoss\AppData\Local\Temp\bsipi.dll".
  "Error loading C:\Users\jimhoss\AppData\Local\Temp\udilt.dll".
  "Error loading C:\Users\jimhoss\AppData\Local\Temp\mounINFO.dll".

  I have Malwarebytes and run it a couple of times and I remove all the files it detects as malicious, but I still receive these error messages when I start my computer.  I also have MS Vista.

  Hello

  They seem to be the remnants entered boot for malware.

  Malwarebytes is normally very good to remove things like that.

  The problem persists after scanning, take these startup entries:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• To install the server does not, after a Preparig to install the window hung for several minutes

  Hi, I tried to install memeo backup of a product for a moment, I recentley purchased. I know that the software and the product is not damaged, because I am able to install it on other computers. Its my fault see tho, I have the seagate FreeAgent GoFlex 1 TB external hard drive, and I had planned to use it on several computers. sort of, I installed it on my computer windows 7 without probs., but when I was installing on my windows vista computer, I accidentally unplugged the drive when installing memeo instant upward.  Needless to say, I knew this would be a problem. Windows popped up saying that the dashboard Seagate (which is the program that installs Memeo instant backup) have not installed properly, so I clicked on reinstall this program with the recommended settings, and I handed the drive and started the installation again. When I did, the registration page (for the unit I was using) pops up and froze, so I closed its process, then Setup of the Board of Directors of Seagate Dash appeared and I started to install, and when he rose to installation of the snapshot of Memeo back, it opens a "Preparing to install" window of a windows installer and after about 10-15 minutes , another windows installer window comes up saying ' to install the server does not.

  Ive done my time just trying to solve this problem and believe he made an incomplete registry file, it whenever it tries to install it tries to use the incomplete record. If one has found a solution to this, or knows what that means of ' installation server does not ", it would be very appreciated for your advice.    If you want to know my characteristics. they are {windows vista 32-bit home Basic, sp 2, 3 GB of ram, 2.10 ghz processor}

  Hello

  you are in the wrong forum

  It comes to the installation of vista operating system instance

  Why don't contact you the program manufacturer?

  Try the repair and recovery forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system?page=1&tab=all

• When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  I need help
  Kind regards

  Thank you very much!

  To host successfully a FSX session what follows is the key enabling

  my client (s) to join my host FSX session!

  "Players Maximum (for a shared together plane 2) leave the locations reserved for friends to 0 set."

  6122 6112 UDP port translation FSX multiplayer traffic of my remote 2 wire gateway to my router Linksys Wireless N DMZ to access game FSX host...

  Only a single router in my configuration of the DMZ, the external network to the router,

  in this case, the 2 wires, had defined port forwarding.

  Am now enjoying Gamespy (R.I.P.) FSX free hosting for my MP FSX sessions via direct connection.

  5 high to the author!

• When I start my computer I get this error message: Windows cannot open this file: GLBD4EA.tmp

  When I start my computer, I get this error message:

  Windows cannot open this file: GLBD4EA.tmp

  To open this file, Windows needs to know what program you want to use to open it. Windows can go online to look for automatically, or you can manually select from a list of programs installed on your computer.

  What do you do?

  -Use the web service to find the appropriate program
  -Select a program from a list of installed programs

  No selection works for me. I don't know what concerns the .tmp file, or why I need to open it.

  Please help :)

  Hello

   
  Perform the following steps to remove the file from the registry.
  a: type regedit into the search box start and click on enter.
  b: Search now to the following key
  HLKM\SOFTWARE\Microsoft\windows\currentversion\run
   
  then delete the following key
  53E412B3-9907-4F9E-A6DC-D0106D1D72C
   
  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information
  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
   
  Hope this information helps.

• When I start my computer I get an error message about V protect Application on the Windows XP-based computer

  When I start my computer, I get an error message, "V Protect Application has encountered a problem and needs to close".

  System information Utility version 1.0.0.1

  OS version: Microsoft Windows XP Home Edition, Service Pack 3, 32-bit

  Processor: Intel (r) Celeron (r) CPU clocked at 2.66 GHz, x 86 Family 15 Model 4 Stepping 1

  Number of processors: 1

  RAM: 1 GB

  Graphics card: RADEON 9250, 128 MB

  Hard disks: C: Total - 76316 MB, free - 47785 MB; KC: total - Mo 305168, Free - Mo 304760;

  Motherboard: MICRO-STAR INTERNATIONAL CO., LTD, P4M266-8233,

  Antivirus: AVG Free Antivirus, update: Yes, On-Demand Scanner: enabled

  I run the above system and would appreciate any help with the removal of this message as if I don't send it to Microsoft, it goes.

  Thank you

  Roy.

  You can try those Microsoft committed the 'experts' ideas Support Engineer (1, 2, 3) for safe, clean boot Mode, Online Scanner, but I think that most of the people who know how XP would recognize that there is no component 'V protect' in Windows XP and a simple search Google reveals that your problem is with your AVG software and has nothing to do with Windows XP.

  You should look in their forums (like me) and here's what they suggest:

  Vprotect belongs to AVG Security Toolbar.
  Please try to run repair installation using the latest installation package.

  If the problem persists, please follow all the steps in the instructions to complete reinstallation .

  I think that if I were you, I would follow the instructions on the page AVG to uninstall and reinstall your AVG because there may be other parts of AVG who are afflicted that you have not yet discovered, but in AVG, some people with V forums protect problems find that AVG repair install works.

• When I start my computer, I get and Error Message (InfoCenter.exe - Application error)

  When I start my computer, I get and Error Message (InfoCenter.exe - Application error) that someone knows what this means and why I make it?

  Hello

  Follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same error occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  I suggest you try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in the article above.

  Check if that helps.

• I start my computer, I get the DELL logo, then I have to restart my computer ctrl alt del it continues for 2 to 6 hours

  Whenever I start my computer I get the DELL logo, then I have to restart my computer keys ctrl pressed Alt del this continues for 2 to 6 hours I'm finely getting online, how can I do this faster process

  Sez helps Vista...

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  The problems of Internet connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

• I get an error "the server does not support an SSL connection" with a code of error 0x800CCC7D in Outlook express.

  I followed Bruce Hagen and still cannot send to the OE section. Reception is no problem. When I try to send I got the following error msg: "the server does not support an SSL connection. "Account: 'pop.att.yahoo.com', server: 'smtp.att.yahoo.com', Protocol: SMTP, server response: ' 250 8BITMIME ', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D. I tried to change the port for outgoing to 456. When I do so I get this error msg: failed to connect to the server. Account: 'pop.att.yahoo.com', server: 'smtp.att.yahoo.com', Protocol: SMTP, Port: 456, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E.  Is there a cure for this. He just started two days or at least that's when I noticed I cud not send. If you can help me I will appreciate it more. Thank you.

  JP banks

  Original title: cannot send using OE 6. Reception Ok.

  Hi JPBANKS,

   

  Thanks for keeping us posted and share this information with us.

  Glad to know that the problem is solved. Do not hesitate to contact Microsoft Windows Forums for issues related to Windows in the future.