After closing the office cover or after running a bluescreen - Driver_Power_State_Failure 0x9f - start/stop

Similar Questions

• I have Windows 7. The office photo on every half hour changes. How to stop that and put up a photo that I want to stay there all the time?

  I inherited this computer from my sister end so I have no idea how it happened.

  I think that should help:

  How-to: change your desktop background (wallpaper)
  Be sure to select only a single wallpaper to use. No Shuffle and set the time to 1 day (better).

• Error 80070643 Windows Update the 13 April 2010. Seems to be the update to the office only.

  The Windows update 04/13/2010, problems since then it never ends the Office updates. Download KBN 981715/981433/980470,980729 start install and error 80070643. Whenever I start a component Office, then it goes to the Windows Installer box takes 15-30 seconds before you start. Also if I start Outlook, same thing then when I email even Windows Installer box.  Tried to restore, only goes so far after this update, I have dealt with this during more than a week and have tried to install a variety of way with no luck.  I don't read a thread here on the 'Office Source Engine (OSE) service"made sure to start which then tried update again once no good same error.  Any suggestion would be appreciated.

  Ed

  On the first screen, select select other options.  It will then bring up a screen showing only the last 5 days of restore points (with a box at the bottom left away from check to display more than 5 days of restore points).  It's the same in all versions of Vista.  I don't understand why you didn't him are not see unless you have not more than 5 days old restore points (but I think that it would always show the box and the option anyway).  Try to run the system restore disk instead of from the computer to see if it works better.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I disable the Agent updates from HP running?

  HP pavilion D4100Y

  Windows XP SP2 or 3 (not sure)

  No error message

  No recent changes

  Problem: The program "HP updates Agent" run frequently and on no particular schedule, certainly not the one I chose.  He takes over my computer for hours and using most of the CPU, fluctuating between 13% and 87% to 1 etc.3% at 6%, etc.. The computer crashes and I can not use it for something else. On the HP updates screen, I put updates on 'NEVER', but that did not work.  The programs always run. In the Windows Task Manager window, the program is called "Agent updates from HP".

  I find nothing on this problem in the base of support.

  How can I disable the Agent updates from HP running?

  Select your Start button, in the search box type 'msconfig' then msconfig.exe under programs.

  Look under the tabs "Services" and "Boot". Uncheck update HP agent, select 'Apply' and close.

• After playing games online, I closed the window and sees a piece of the game into my office window. It looks like a virus. What should I do?

  After playing games online, I closed the safari window but I can barely see the walkthrough of word written in my office. I changed my desktop to a solid color, so I can see it better. I also see the Netflix pause button and if I reduce the window as I type right now I see Select a community to Post To my office. Is this a virus? If yes what should I do to fix it?

  Thank you!

  Are you referring to the "ghost image" or "ghosting"?

  Avoiding persistence on Apple displays - Apple Support

• Way to save Sticky Notes at the office closed AFTER SN?

  I just started to use app reminder of Win7. I noticed that, after closing the program in my taskbar, the note itself disappeared until I restarted the program SchoolNet. Of course, I'm in the habit of closing a program after that I'm done with its use; is there a way to get the Sticky Notes that I write, to stay on the desktop AFTER I stop the program itself?

  You are right. They are not saved, nor can they be saved to the desktop.

  Why close Sticky Notes If you want available on the desktop?

• Qosmio X 500-106 - after update driver, close the computer cover closed

  06/09/2010, I have updated my driver Qosmio X 500 - 106 Nvidia GTS 360 M and now when I close the lid of my laptop it stops completely.

  I checked the settings in the "power options" on "then of closing the lid" section and I have to go to sleep, what she has done well before. Until I opened my computer laptop to login screen, and he would ask for password. Now, every time I open computer laptop it re-boots and request I would go in "safe mode, safe mode with guests, etc...." »
  Anyone having problems or is this an update of the driver that went wrong?

  Any help greatly appreciated

  the driver update has been 8.16.11.8875

  Thank you

  Hi lizardk101,

  If this happens since the new display driver, you must reinstall the old version. Therefore, you can use the restore system to a previous point.

  Check this box!

• HP-17-F113dx: notebook not to resume after having closed the lid.

  Hello

  I have a HP Pavilion laptop 'HP-17-F113dx.

  It does not repeat the operation after you close the lid.

  I have to restart the computer to make it work again.

  What is the driver for this problem?

  @alexanderhernan

  Thanks for joining the HP Forums.
  I'll be happy to help you
  
  As I understand it the laptop is not take over onscreen once his COVER is closed.

  Don't worry, however, as I have a few steps to help solve this problem,

  Let's start by disabling hybrid sleep: click here to see a YouTube with a step by step guide.

  For the steps and details on how to control what your COVER:

  In the Power Options window that opens, click the link to Choose closing the cover on the left sidebar.

  Here you can choose what your power of the buttons on your computer, as well as what happens when you close the lid.
  You can choose to do nothing, sleep, Hibernateor shut down.  In general,sleep is a good option, but if you leave your laptop running, select do nothing.

  Note that you can change the settings for a cell and sector, so your laptop works differently when you use mobile compared to when you are connected to your office.
  Given that we usually only would want to let our laptop running when it's plugged in, we put ours to always go to sleep when it's on battery power, but to do nothing when you close the lid while it is plugged in.  Very convenient.

  Below, you will notice a few additional parameters, but they are protected by default.  Click change settings that are currently unavailable for editing.

  Now you can choose if you want that your computer requires password when he wakes fashion 'sleep'.

  Once you are finished, click Save at the bottom to start to use your new settings.
  If you want to come back when you're on the move again, just repeat the steps and set it as you like.
  Now, you are in full control of what happens when you close your laptop.

  I would like to know if these measures worked for you.  If they did, it's great!  Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

• SP U400 - cannot return to the desktop after entering in the mode 'sleep' by closing the lid

  Satellite Pro U400 V-11 I used for a week. I don't know if this is a problem or I did something wrong. My setting of closing the lid is recording mode "Eve" in Vista.

  When I close the lid and open a few minutes later it's ok, I see the password login screen. But if the computer is in "sleep" for a while it does not return to the office when I lift the lid. The screen is black. Fan started working then quiet several times.

  The first three LEDs on the left are green. Keyboard does not respond. And also switch / stop does not work either I press once on or hold it. And only after I unplug the power adapter and press the power, it works. But it restarts the system and Windows could not close correctly the error message is displayed.

  Is this normal or something wrong with the mode 'sleep'?
  Thank you

  Hello

  I read on some of the similar problems regarding "standby" mode and the black screen.
  Someone suggested to update the BIOS and the display driver

  So I highly recommend it too much
  See the European driver of Toshiba page, choose the model right for laptop and try to update the BIOS, then the display driver.

  Reboot the laptop and see if the problem still occurs.

  Good luck

• Tecra M7: Tablet does not work after closing the lid

  Someone had problems with the Tablet does not work after closing the lid on a Tecra M7? BIOS is 3.20

  Does not happen on hibernate or sleep.
  I have the set cover to do nothing on close.

  Hello

  What do you with Tablet does not work after closing the lid?
  Is - what the laptop freezes or what? What happens exactly?

  Closing the parameters adjustable lid to Hibernate or standby mode or no action.
  These settings can be defined in configuration power saver actions.

  If you have some problems with some Toshiba applications installed, I recommend you to reinstall the program and TOSHIBA common Modules that doesn t work properly!

  Best regards

• Whenever I start my computer after the office's I get a windows firewall disabled alert

  Whenever I start my computer after the office is responsible, I get a warning from windows firewall disabled. The latter for more than 60 seconds. After that, my firewall is on.
  How to solve this delay?

  Hello

  What is firewall WIN XP or any other third-party firewall?

  If it is integrated, you can reset the firewall in factory default state. Run from the command prompts this command:

  NETSH FIREWALL RESET

  How to run the command prompt:

  Click on Start - run - write CMD , and then click OK

  LC

• How do you do the command prompt window stay open after running a command?

  OK, I feel stupid asking this, because I knew the answer before. I learn Visual C++ programming. The book I learn to write C++ and past then in details on the writing of the GUI from Visual C++ part. The book that I market me through compilation and to make an exe file in a cpp file, and then he said: go to the directory in Explorer and double click on the exe file. I do, and the command prompt appears a quick second before closing down. The example in the book shows the output, and the writer obviously has his guest configured to pause after executing an exe file.

  I just set up my guest to do the same thing, so I can at least see the results. I know that running the exe I wrote, but I would like to see the output for less than a second.

  I don't know how you code this. But if it's like a normal batch or whatever it is command line related.

  Follow these steps to use a switch defined by the user at the end of the script.

  To pause a file of DOS commands under Windows XP, continue to the next command, you can use the PAUSE command. Make request to the user with the text:

  Press any key to continue. . .

  Then the batch file is waiting for the user to press a button. However, if you want to pause a batch file and display anything? Simply redirect the results to no one as follows:

  pause > null

  Given that it is perhaps not very useful (how will the user know they need to press a key to continue the batch file?) you display a different prompt. Issue a command with your desired guest ECHO, and then issue the break preceding > no command.

  For example, to pause a batch file of Windows XP with the prompt "Press ENTER to run the command", use the following commands:

  echo press ENTER to run the command
  pause > null
  MCP. MCDST. LVL 80

• After you download the Office Svc. 3 Pack, 6 important updates & 2 other updates failed due to an error 57F

  I have a PC with Vista Home Basic and remote access service. He sent me a message that the updates were available so I started the process. It downloaded & installed Office Service Pack 3 and all but 6 significant updates and 2 other updates failed. I tried 3 times to download & install the important updates 6 & when all 3 attempts have finished, the report indicates a 57F error code. In another location, trying to get specific information, I found: WindowsUpdate__0000057E and also Update__dt000 from Windows have been listed as the following:

  1) office 2003 Service Pack 3 (SP3) 108.2 MB

  (2) update 4 Microsoft Office 2003 (KB2543854) 12 K

  (3) update 4 Microsoft filter junk e-mail in Outlook 2003 (KB2553111) 3.4 MB

  (4) update 4 Microsoft filter junk e-mail in Outlook 2003 (KB2597035) 3.4 MB

  (5) update 4 Microsoft filter junk e-mail in Outlook 2003 (KB2598343) 3.4 MB

  (6) the update for Office 2003 (KB907417) 225 KB

  I hope someone can help to direct me to download & install the updates failed. Thank you!

  Hi Linda,

  Please, give him another chance & perform the procedure below

  Diagnosis: The permissions were incorrect for some registry keys.

  Considerations: I've used this for Vista Ultimate SP1 and Office 2003 SP3. A similar procedure may work for other versions of office and Windows, I don't know.

  You need to be reasonably computer or ask someone who is. You will need the installation of office files.

  Important note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  FIX: You * may * be able to use to Repair Office 2003 to identify the keys to the problem and then use the Registry Editor to change the relevant key permissions:

  1. connect to your computer as an administrator (if you can install programs, it is likely that you are an admin).

  2. run the Registry Editor (Start > run and run regedit).

  3. in the registry from backup of your registry Editor (select the top node of the computer, and then click file > export, save the file somewhere sensitive.). (Do not close the registry editor, yet).

  4. run a repair for Office 2003 (see relevant Microsoft KB).

  5. When you get an error in the repair process using the registry editor, find the EXACT registry key named on the command prompt (using the easy to find, Ctrl + F4 and F3 to repeat).

  6. right click on the key and select permissions on the shortcut menu.

  7 set the user groups to enable total control and reading (click OK to save the changes).

  DO NOT CHANGE A KEY UNLESS IT IS EXACTLY THE SAME AS IN THE REPAIR LINE.

  8. in repair, click the Retry button.

  9. If the error prompt is replaced by another invite for a different key then the fix worked. Repeat step 5 above for the new registry key.

  10. If the error reoccurs prompt then repeat step 6, but assign another likely group of total control, for example the system.

  11 when all the keys have been updated and the repair finishes and then close the registry editor, then try Windows Update again.

  12. If this does not correct the problem, then you must restore your backup registry file.

  PostScript: If you experience system problems after that you can restore the registry by double-clicking the registry file that you saved. If you can not do a repair of Office or run the registry editor, then you may not be an administrator.

  Also try running the difficulty to reset the components of Windows updates from the following link.
  How to reset the Windows Update components?
  
  http://support.Microsoft.com/kb/971058
   
  For more information, click on the link below,

  How to troubleshoot incidents to update your installation of Office on the Office Update Web site

  http://support.Microsoft.com/kb/304498

• Display settings and available to the office disappear after logoff or shutdown

  Title: win 7 Professional usrs to settings not saved
  Simple, whenever I log on or a stop, the display settings and available to the office disappear...  Help!

  Hello

  1. don't you make changes on the computer before the show?
  2. What is the brand and model of the computer?

  
  Method 1:
  You can update the drivers video/display on the computer on the manufacturer's Web site and check.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  
  Method 2:
  You can also perform a clean boot and check if the problem occurs.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
  
  Method 3:
  You can also consult the supplied knowledge base article and check.
  The configuration of the monitor is lost after the restart of a computer that is running Windows 7 or Windows Server 2008 R2
  http://support.Microsoft.com/kb/2496400

• Loading the Google's HTTPS version causes Firefox to do 3 background request every 45 seconds even after closing the page.

  Loading the Google's HTTPS version causes Firefox to do 3 background request every 45 seconds even after closing the page.
  With any other HTTPS sites that support HTTP Strict Transport Security (HST), I noticed connection only 1 history.
  How can I disable these background connections?

  Hello, I'm no expert on the matter, but it is quite possible that the spdy Protocol, which is used by google on its secure sites (twitter atm) and is causing the behavior that you have seen.

  "SPDY connections are persistent connections. For optimal performance, it is expected that clients will not close the open connections until the user navigates away from all web pages referring to a connection, or until the server closes the connection. Servers are encouraged from the connections open as long as possible, but can stop idle connections if necessary. »
  http://mbelshe.github.com/SPDY-specification/draft-mbelshe-SPDY-00.XML#RFC.section.2.1

  You can try to disable support for the spdy Protocol in firefox (in all: config) and see if that changes the number and length of connections to the server.