After disabling the firewall, I can't access port 6699

Similar Questions

• After activating the Passthrough I can't access the ESXi machine more

  Hi guys

  A newbie here, please excuse my ignorance

  I activated just pass through and now I can't access my system through the vsphere client

  I've also redirected ttyS2 series and I am able to access the system through a terminal window

  What can I do to remove the passage by settings CLI?

  On a related note, I have an old Quad NIC card which is considered by the kernel. (lspci - v | less ) but I can't see with esxcfg-NICS-l

  How can I set up is available to ESXi?

  The card is

  Digital Equipment Corporation DECchip 21142/43 (rev 41)

  Subsystem: Hewlett-Packard Company 10/100Base-TX (PCI) [A5506B]

  Thank you

  PF

  PS: the console is locked on a message saying vmkapi_socket successfully loaded

  I bypassed this by disabling the BIOS feature that supports Passthrough

  After that, I was able to connect with vsphere client and cancel the changes (in fact they automatically disabled)

• RSAC can't disable remote Firewall errors "could not access ServerName, the network name cannot be found.

  I opted for the "Restore default settings" option in the firewall while working on a client-side computer. For this reason got disabled the option "remote share' and now I can't access the machine remotely. The machine (which is not in the same network) does not monitor or keyboard attached to her and her to a different location so I can't physically connect you and activate this option.

  I tried to disable the firewall remotely, but the following command does not work.
  PsExec \\hostname u user_name password cmd.exe Pei

  It returns the following:

  Could not access ServerName

  The network name cannot be found

  Make sure you share the default admin$ is enable ServerName

  This fact has not resolved the question above.

  HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\ and create or edit a REG_DWORD LocalAccountTokenFilterPolicy value and set the value to 1

  Help, please.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking%2Cw7itprovirt&filter=AllTypes&sort=lastpostdesc

  Hope this information is useful.

• How can I disable the firewall of windows for FPGA

  I tried to compile an FPGA vi. Towards the end of compilation, asked me if I wanted to disable something in the windows firewall (probably to allow for communication between my computer and my PXI-7854R). At the time, I had no administrative privilege and couldn't do anything but cancel this request. Of course, nothing that I compiles now runs. How to get back to the point where I can disable the firewall?

  A picture of the error message is attached.

  

  Thank you

  Stephen

  Hello Stephen,

  Thank you for posting what solved your problem - it helps other users who stumble on this troubleshooting page.  So that they can see what position fixed, could you please go ahead and mark the message as a "solution" and give good Bravo?

  Thank you!!

• disable the firewall gateway wirelesss

  Got first one iPhone, but without a plan.  I can use it all default programs, but cannot receive/Send Mail as my wireless modem Motorola SBG900 Wi - Fi put in place of the included firewall is enabled.

  Is there a way to disable the firewall of my wireless gateway without running configure the modem again?  I'm afraid to spoil current working set up with my laptop. Thanks in advance.

  Hello

  1 did you install a third-party firewall on your computer software?

  2. you use an e-mail client or webmail on your computer?

  3. what email provider do you currently use? It's Gmail, Hotmail, Yahoo?

  4. are you able to access the websites properly?

  5. what web browser do you use?

  6. you you receive error message?

  7. have you made changes on the computer before this problem?

  You can disable temporary windows on the Windows vista computer firewall. Check out the following link.

  Turn Windows Firewall on or off

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  See also:

  Windows Firewall: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Firewall-recommended-links

  NOTE: turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers. Viruses or malicious software can get into the system. After you complete this step of troubleshooting, turn on the firewall.

  If the firewall settings are related to the iphone, you can contact apple support for assistance.

  
  

• After downloading the updates, I can't reboot my pc, so now I can't receive updates.

  After downloading the updates, I can't reboot my pc. I code pops up that says that if I end now that I'm going to lose all unsaved data. So, I can't log out or restart without losing my updates. I can't get my active X to work now... I can't download it because it requires a reboot. Help!

  Hi stevenstar,.

  a. you just download the updates of Windows or you have installed them as well?

  1. at this point of time you can cancel the reboot and back up all your data and close all applications that are open and restart the computer to make the changes.
  Once the computer restarts view the Windows update history and check if updates are installed.
  See the Windows updates are installed
  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
   
   
  2 type eventvwr.msc/s in the address bar.

  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.
   
  For more information on event viewer, see the articles below:
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
   
  We hope to hear from you soon.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After downloading the program, I can't install them. Error: 'path is not a valid Win32 application ".

  After downloading the programs I can't install them

  Hello

  1. which site Web you downloaded the program from?
  2. you use a download manager to download the program?
  3. what web browser do you use?
  4. don't you make changes on the computer before the show?
  5. were you able to install other programs on the computer?
  6. what program are you trying to install?

  
  Method 1:
  You can try the steps in the article of the supplied knowledge base and check.
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651
  
  Method 2:
  You can also perform a clean boot, and then try to install the program and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 3:
  You can run Microsoft Safety Scanner in Mode safe mode with network and check.
  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode 

  You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

• Regarding my PHOTOSHOP CS5.1: I upgraded my computer, copy all the content of the hard drive to the new, and although I have disabled the software, I can't turn it on again in the new hard drive. This is an original product with a serial number.

  Regarding my PHOTOSHOP CS5.1: I upgraded my computer, copy all the content of the hard drive to the new, and although I have disabled the software, I can't turn it on again in the new hard drive. This is an original product with a serial number. How can I activate it?

  Hi Uri,

  Please click on the link below and contact the Adobe Support via chat.

  Contact the customer service

  Hope this will help you.

  Kind regards

  Hervé Khare

• last version of Firefox can not ensure a secure connection without disabling the firewall, why?

  I've upgraded to the latest version of Firefox and now whenever he goes to a secure connection, it debits far and doesn't connect or said that the connection was refused. I'm under Firewall PC Tools and strangely when I turn off the firewall, it connects. I don't really like it. I tried to remove Firefox to the list of applications and add new, but it did not help.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

• BlackBerry smartphones can not disable the firewall - see the key for the

  "The application has attempted to open a connection to a location inside the firewall which is not allowed by your policy" "

  Please help me...

  Hello Nurulfy7,

  Welcome to the community,

  Yes, you get this message because you under BES account and you can not disable it.

  Take care

  Click 'Like' If you want to thank someone.
  If problem resolves mark message (s) as a 'Solution', so that others can use.

• I can't upload photos to email or FB even after it turned off the firewall. Can U help me?

  I can't access FB or email items or first... Alreadydeactivated Windown firewall? @

  Moving to Photoshop Elements

• after update borwser. I can not access the updates. Help, please

  I got the update of the browser I can't find my list of favorites, or anything that says favorite

  searcy44,

  http://answers.Microsoft.com/en-us/IE/Forum/IE9-windows_vista/where-are-my-favorites-and-history-located-in-the/313b8179-0aa6-422F-9ece-81e6f60f6736>

  06/09 / 1105:39: 01:00

• HP 6830 s - KE977AV: after installing the W10, I can't reactivate my bluetooth

  Hello

  Before installing Windows 10, I disabled my bluetooth via the HP Connection Manager module. The module cannot be seen in the BIOS.

  After you have installed windows 10 x 64 from the DVD, I can't reactivate bluetooth via the operating system because it is not detect it and HP connection manager cannot be installed on Windows 10.

  Y at - it a solution for my Bluetooth without formatting my computer (for example: get a working version of the HP Connection Manager)?

  Thanks for your reply.

  Hello:

  I've done it before...

  Try the HP Wireless Assistant software instead and see if it works on W10.

  You can use this software to activate the HP bluetooth module and then uninstall it once you have it visible.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3688870&swItemId=ob_84194_3&swEnvOid=4059#tab1

• CD-ROM/DVD-ROM is missing after disabling the Jmicron RAID

  My computer ran with raid jmicron and which does not allow playback of DVDs or write, so after that I upgraded from my hard drive to 500 GB for a 1 TB HARD drive I changed from IDE to AHCI and disabled the jmicron raid so I had to install a new copy of windows from usb.

  Without the jmicron raid, windows does not detect my CD-ROM/DVD-Rom device.

  The DVD/CD drive does not appear in the Bios or Device Manager.

  64-bit Windows 7 Home Premium

  Hello

  Thank you for the update.

  I'm sorry for the late reply.

  I suggest you try using the steps described in this article and check the issue.
  Reference:
  Error: A required CD/DVD device driver is missing - when you boot Windows 7 or Windows Vista installation disc
  http://Support2.Microsoft.com/kb/952951

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Please keep us informed of the status of the issue.

  Thank you

• Data on the iMac, but can not access the files.

  Hi all

  I have a iMac Core 2 Duo (3.33, 21.5 inches) since end 2009, running 10.6.8 Snow Leopard and I'm trying to recover some files that seem to be there, but I can not access it due to an update of the unfinished software.

  A few years back, I tried the Mavericks update using an external hard drive as the boot drive (at that time there I ran 10.6.7 Lion), installation is never ending and I accidentally deleted this file to start on the outside, so I ended up coming back to his moose BONE, 10.6.8 Snow Leopard.

  He seems to resemble a new install of Snow Leopard, except my old files (about 350 GB) still live on this subject, but I can not access all of the files, or does not even appear in the Finder.

  Would appreciate any advice or tips on how to do to recover my invisible files. Thank you!

  Do you see the drive in disk utility?

  1. Connect the external drive
  2. If it has external power supply, make sure that that is connected
  3. If the external hard drive has a power button, make sure that it is set to
  4. Goto docking station
  5. Click on finder
  6. Goto menu bar
  7. Click the menu go
  8. Choose utility
  9. Double-click disk utility

  The drive will appear in the left column of the disk utility?

  If the answer is Yes, if you click on the drive, and then click on check, what disk utility say?