RSAC can't disable remote Firewall errors "could not access ServerName, the network name cannot be found.

Similar Questions

• NET USE error: '67 system error has occurred. The network name cannot be found. »

  Original title: NET USE worked for error.

  OK I used the following with a RDP'ing of XP in a server of S2k3 years:

  NET use lpt2 \\SERVERNAME\printername /persiternt:yes

  now, I get a "system error 67has has occurred. The network name cannot be found. »

  What made me state was I restarted my XP machine.

  What I've done since then rebooted the box of the network, hubs, Wireless DSL modem router and the win 2 k 3 boxes with the same results...

  suggestions?

  Hey cvs334, would you unplug the ethernet cable from all these devices ' network box, hubs, Wireless DSL modem router and the win 2 k 3 boxes "then unplug the power cord for each. Then after about 60 seconds, connect waiting for DSL modem for sink power cord. Then plug the router after sink connect the router to the modem, and then connect the hub and other devices. This allows the automatic redirection Web DNS router to the modem. The router may be failing or the router LAN port may be faulty.

• Problem creating ad hoc network-error: Windows could not set up the network.

  Original title: problem creating ad hoc network

  Hello dear,

  When I tried to set up an adhoc network and after entering the name and password of the network. Following up error message pop (Windows could not set up the network).

  I use windows 7.

  P.S. before I used to create the ad hoc network with no problems. But now no more.

  Kind regards

  Ana Paula Yousef

  Hello

   
  Did you change in the computer before this problem?
   
  I suggest to go through these steps and check.
   
  Method 1:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 2:
  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to " http://support.microsoft.com/kb/946481 ".
   
  You can also check:
   
  Set up a computer-to-computer (ad hoc) network.

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad-hoc networking.

  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

• Problem of uninstalling with the error 'could not access VBScript Runtime for custom action'

  I'm having a problem uninstall a program. I'm getting repeatedly blocked in error: "could not access VBScript Runtime for custom action.  That means this error in uninstall a program? Would appreciate a fix for this. The program is called Soluto.  Thank you.

  P.S. I tried as admin and type regsvr32 vbscript.dll then regsvr32 jscript.dll in the command prompt.

  As well as their registration as an administrator, you may need to remove the entries for them in HKEY_CURRENT_USER.

  See:

  http://blogs.msdn.com/b/astebner/archive/2007/06/07/3151752.aspx

  Also, make sure that your antivirus software is not blocking scripts.

• Cisco ACS SE "set ip" error: could not set up new NETWORK card configuration.

  Hello

  I get the error "error: could not set up new NETWORK card configuration." When I try to set the IP ACS SE.

  When I called into the device image and tried to do an initial installation, the IP to not hold after the restart and went back to the default value.

  I went by NetPro and apparently it is a common problem. One person it is solved re-imaging unit, but who has not worked for me.

  Someone there with a solid solution? I use NIC 1 FYI.

  EDD.

  Ed,

  Please make sure that if ACS is associated with active before setting Ethernet connection

  or change the IP address of your ACS system engineer.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.0/installation/guide/appliance/admap.html#wp1109621

  Kind regards

  ~ JG

• Windows could not automatically detects the network proxy settings

  Recently, I noticed a triangle appearing little attention with my network icon in the taskbar. When I right click and solve problems, it comes with this message. Windows could not automatically detect the network proxy settings. My internet has been really slow lately, but I wonder if there is a problem with my network? or is - something that my ISP has set?

  (This message is intended for all problem reports)

  Check the Internet Options (Internet Explorer tools or configuration panel / /Connections Options tab / LAN Settings and make sure that Proxy Server is not checked even if you use Firefox.)  Check the settings in Firefox Tools / Advanced connections / settings (should be use system proxy settings or no proxy).

  Search for malware, especially using malwarebytes.

  Try these commands in this order in an elevated command prompt.  Not the first first, then reboot and try.  If still bad, try the second.

  netsh winsock reset
  netsh int ipv4 reset

  If they do not help, please after the output of a command ipconfig/all-order

• Google Chrome could not connect to the network during installation...

  Currently I use maybe obsolete google chrome... But when I download the newest chrome and during installation... it could not connect to the network or internet connection so prevented me to install the new chrome... What's the problem? and how do it fix it? Thank you

  Try to download the full installer:

  Chrome for work: Chrome for work - Google

• I have a network of offices with windows 7 and XP PC 6 PC 7. Each day network neighborhood loses the xp computers. I can always ping them but they do not appear on the network.

  I have a network of offices with windows 7 and XP PC 6 PC 7. Each day network neighborhood loses the xp computers. I can always ping them but they do not appear on the network. The PC xp always had access to the internet and can still ping windows 7 PC normally, but I can't connect to the shares or see them in the network neighborhood. The question seems to come and go during the day and can be due to the network traffic? I am lost at this point. A reboot of the xp PC is not resolved, but a restart of the server main window file 7 pc solves it for a while. Help!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Impossible to download programs, get the error could not access network location %APPDATA%\protector.exe

  Help, please

  I am trying to download the new version of Microsoft Messenger and get up then stop downloading and I gat the message - could access the network % APPDATA%\.--aussi location, I get the same message when trying to domnload i tunes.  CAN ANYONE HELP PLEASE.

  Hi, Neil,.

  FixIt - You receive an "Error 1606" error message when you try to install or remove a program from Microsoft

  http://support.Microsoft.com/kb/886549

  You can also try to create a new user account.  Retry - the same problem occurs in the new account?  If this isn't the case, you have a corrupted profile.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Error 1606: Could not access network location %APPDATA%\protector.exe

  http://forums.techarena.in/operating-systems/1127524.htm

• Error 1606: Could not access location %APPDATA%\ network

  A year ago, I installed Office Word 2007.  For the past 4 months, I could not access my files in Word.  When I try to open Word, I get... "Error 1606: could not access network location % APPDATA%\" »

  PLEASE... Tell me what I need to do to correct the problem.  I have there ini files and I need immediate access!

  Thank you!

  Please see if the help article:

  You receive an "Error 1606" error message when you try to install or remove a program from Microsoft

  HAL

  --

  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.comcom

• Error: could not connect to the server DAW!

  
  Hello

  I just installed and created new repository for DAC but server DAC failled to start with error dialogbox to the client "error: could not establish a connection to the server DAW! I don't see the newspaper. I tried the modified online dac port still isn't working. Please notify. Thank you.

  DAC server started after the update the hostname in the client configuration page.

• Calc Manager of error "could not connect to the server Dimension."

  Could not connect to the server of Dimension.

  Please make sure that the required services are started.

  https://servername:19443 / HyperionPlanning/servlet/HspAppManagerServlet:

  Connection refused: connect.

  Hyperion Planning - 11.1.2.3

  can someone help me.

  Thank you

  Follow the steps below-

  -Stop all services
  -Run the Oracle's EPM System Configurator (all Instances)
  -Select Hyperion Foundation-> the common settings and configure the Web server
  -Click next and deselect ' use SSL for Java web Application Server Communication (requires manual configuration).
  -Go through the process and finishing
  -start the EMP Services

  Thank you

  ~ KKT ~.

• ePrint Setup could not connect to the network

  I have problem with my hp3515 all-in-one printer (two months). I am facing problem with ePrint. It has been installed correctly, but recently it has stopped working. HP wireless works and shows the IP address. When you press the ePrint button it gives the message that it could not connect to the internet. I tried to reconfigure ePrint and now it is not possible to reconfigure. I use a router D Link DSL-2750U.

  Hello

  First, I put a static DNS on the built-in web server (EWS). To do this:

  1. Type (example 192.168.XXX.XXX) IP address by itself in the address bar of the browser. Who will bring to the top of the EWS page. From there, you want to find the network tab. On this page, find the column that is usually found on the left and select 'network' and then on the network address to find net page (IP), then select this option. Who will bring to the top of the configuration page.
  2. You want to draw attention to section 2 entitled "DNS Configuration". Change the radial button to "Manual DNS"; for filling of favorite/primary DNS 8.8.8.8; for the secondary/Alternative fill 8.8.4.4 and then select 'apply '.
  3. If a message appears after it with an "OK" button carefully read this message! Most of the time this message is to inform you to click OK to cancel the change you made, if that's the message of case ignore, you can simply navigate to another tab on the built-in Web server to get away.
  4. Power cycle then the printer and it should then connect to web services

  As is printing wireless to other computers and static DNS should solve your problems of ePrint you would not need to uninstall at this stage.

  To reprint the touch of info page the button marked 'ePrint' on the front panel of the printer and that should bring up an option on the display screen to re - print information page.

• Problems with wild tangent error "Could not connect to the server."

  Original title: wrong with wild tangent

  I recently downloaded ie 9 latest version. If this has something to do with him or not. but I can't play all the games that I download from wild tangent. What happens, it is 'impossible to connect to the server', please check you internet connection again. but I'm connected to the internet, otherwise he would not have uploaded the game

  Hello

  What operating system is installed on the computer?

  The error is that she's trying to connect to wild tangent, but unable to complete the connection.

   

  Method 1: You can disable the security software and see if that helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Reference:

  Disable the antivirus software:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Method 2: Optimize the Internet Explorer browser.

  Reference:

   

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

   

  Internet Explorer is slow? 5 things to try:

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

• Error: could not connect to the specified repository. Please select a different alias and try again?

  Hi, I was able to connect to the master repository in the console of the odi.

  When I'm trying to connect to the repository of work, I get the error as

  "Unable to connect to the specified repository. Please select a different alias, and then try again. ».

  I tried so many times. I had and I have not solved.
  

  Please help me.

  Thanks in advance,

  A.Kavya.

  Hello

  To create a JNDI, connect to the Weblogic administration Console > go to Services (on the left panel) > Data Sources
  You will see the list of configured JNDI names already. You must add one more favorite JNDI for your schema repository work connection. You can see already existing repository work connection JNDI (odiWorkRepository) for the sample of settings, same values, you can change this existing odiWorkRepository JNDI in user =<> this parameter in the Connection Pool tab. Mention the name of user/schema of your repository of work in this article and also provide the schema appropriate in the section password password.

  Kind regards

  Parag