Similar Questions

• I tried EvevryThing! The "CREATED WITH ADOBE ELEMENTS 9 TRAIL VERSION FIRST" will not stop Displaying, even after I put in the serial number and Regerstered. Also the product does not show under my profile?

  I tried EvevryThing! The "CREATED WITH ADOBE ELEMENTS 9 TRAIL VERSION FIRST" will not stop Displaying, even after I put in the serial number and Regerstered. Also the product does not show under my profile?

  How can I fix it? Nothing in help or on the Site.

  Once you have registered the product, you should not see the banner of 'Trial' on NEW projects. This isn't the case, right? You only see on the project that you created before you register the product, right?

  That said, to remove the banner, go to the folder of directory on your hard drive where your project PREL files are stored and delete the folder called Adobe Premiere elements preview files.

• I'm trying to install Office note 8.1 but get this error message immediately after you enter the serial number and authentication code.

  Remark Office OMR

  I've been remark office omr 8.1 installed on 32-bit windows vista (intel pentium DC) for the last year laptop. Now plan to move it to a more recent hardware and the OS.

  I'm trying to install Office note 8.1 on Windows 7 Home Basic 64 bit (on laptop AMD E450 DC base). But am getting this error message immediately after you enter the serial number and authentication code. I tried to install different versions of the .net Framework (from 1.1 to 4), but nothing seems to solve the problem.

  I even tried to install it in mode compatibality. but no luck.

  Here is the error message (between BEGIN and END lines)

  -BEGIN-

  An error occurred instantiating the object of authentication. Please restart your computer, and they run the Setup again.
  Error number = 2147219705

  Error = description

  ------ END--------

  Appreciate any help

  Thank you

  SJ

  Just for the follow-up of this: I have sent comments, and they responded in 20 minutes with:

  Please contact the Support of the note.  I'm sorry that you are experiencing this error, but it seems by the error message that you install note on a Windows 7 computer.  This error is caused by a Microsoft security update that was released in July 2011 for Windows 7 and caused upward to change our software.  Here is access to our Download Center for you to install the version 8.4 of note.  You will use your current serial number, license key and authentication code.
  They then provided a link to their Download Center where I could download 8.4
  E - mailer to * address email is removed from the privacy * and they will answer you. They have great customer service.

• Cannot reset windows 8 for the factory settings and get an error 0xc000000f, after system startup.

  * Original title: I can't seem to be able to refresh, reset or reinstall my windows 8

  I have a laptop Asus s200e

  I would I have tried to reset my windows 8 to the factory settings and the thing is he always tells me that I have missing files and I need the installation disc. That is, that I don't have an installation disc because it is preinstalled and I tried to start up and I got an error 0xc000000f.

  Please help me

  Hello

  Thanks for posting the query on Microsoft Community.

  Am sorry to know that you are unable to boot the system, and you get an error: 0xc000000f.

  This error can occur if some files are corrupted, or if you have made changes to your computer.

  Did you change to your system, the hardware and/or software, before this problem?

  You can try to restore the computer configuration by clicking on the link below.

  Windows 8-How do I restore the system to the factory default settings, if I can't get into the system?
  http://www.ASUS.com/support/FAQ/1008226/

  Note: If you reset the computer to factory settings, it will remove all applications, programs and drivers that you have installed. If you need to reinstall all applications and programs, once you reboot the system.

  If you still have the same problem, you must contact the Asus technical support. Here is the link: http://support.asus.com/ContactUs.aspx?SLanguage=en

  I hope this helps. If you still have problems with windows know please let us.

• FF 8 causes flash to not however with load after you open the Task Manager and open the plugin container folder, everything works fine

  New upgrade FF and all the flash based video site does not load and makes computer almost hang. After I open the Task Manager and go to the folder where is the plugin container, everything works back. I don't do anything at all after opening the folder.

  What kind of error is it? Its very strange. If all goes well, there is a fix for this.

  Another method would be to uninstall FF and install FF8.0 and not use the upgrade FF7.0. It worked for me.

• Bring item full screen after use of the 3D camera and changing point position/orientation

  Hello.  I am a new user of After Effects.

  After you apply the 3D camera and make adjustments and also make adjustments to a position of individual items and the orientation in 3D space.

  is there a way to get one full screen (and directly to the camera) once again, other than doing 'eye '?  Is there a feature or mathematics that will get the item mode full screen

  as if you do not apply 3D or or changes of position?

  Said another way, if I have several parts of the video on screen, turned them all 3D, changed that position and orientation, then applied a 3D camera and adjusted that

  so no items are full-screen one, then you want one of them to return to full screen mode, can add you values of parameters of the element and the camera may be a value

  which translates into a single element to a full screen/straight on angle (as if the 2D and not affected)?

  Thanks in advance for any direction.

  Hey brvid

  The easiest way is to:

  -Start with your image full screen

  -Click on the box for this layer 3D

  -Add a camera (which uses the current view for its zoom/position)

  -Add a null value, click on the 3D box so that the null value

  -parent the camera as NULL. That the null value has the same ISP values as image

  Now, you can duplicate this image and place around the scene in any position and rotation.

  - Then you can copy values ESP of other images as the key your null and the camera images will move to this image and it will be full screen

  Hope this helps,

  Steve

• White screen after you disable the primary monitor and secondary on Satellite

  Hello

  I tried to connect a LCD screen on my laptop, in the first place, I went to the Panneau--affichage--controle--avancees--controler--proprietes--device use settings: disable!

  This allowed secondary LCD screen but the most stupid thing, it is that when I wanted to return to the screen of my laptop that I followed the same procedure with the LCD.

  The result is that now the two are empty. Laptop screen turns white as soon as starts to load windows. Combination Fn + F5 didn't help. I also tried to get into windows in safe mode, but it has not been possible.
  Does anyone have any ideas?

  PLEASE, I BEG YOU.

  Thank you

  During startup in safe mode, the laptop charge only a current drivers and it should be able to see something on the screen.
  But if it is not possible and you are not able to deliver internal display on the screen, then I guess you need to start form the recovery CD and reinstall the OS :(

  The new facility is scheduled to replace all the display settings and the laptop should work.

• COUNSULTING JET 6700 / after forest in the eprint centre and ranging in settings exploitation, I

  COUNSULTING JET 6700 / after connection to the eprint center and going into settings I filled the email from authorized users to send print jobs. Next time, I'll check authorized users only two of the five I entered are present.  Why are others deleted?

  If you have problems with ePrint Center (EPC) don't save contacts to the list of senders, I would use this process to try to get the account to save contacts.

  1. connect to ePrint Center

  2. click on the list of senders and add a normal user.

  3. click on Save after adding the address - do not sign of ePrint Center.

  4. then send an email to the printer from this sender you just added.

  5. once the e-mail has been received by the printer, disconnect and then come back in ePrint center and check the list of senders.

  If this above process does not work, it would seek to remove web services and adding it back.  This would cause one to lose their email address and need to reprint the code printer and set up the printer on the account again to the EPC.

• Hi, on some sites of adobe muse, when I load, I get a mobile version of the site (on a laptop). I tried to remove the 'phone' and the words after that on the address bar and even cleaned my browser, but the problem still exists. What can be the reason? I'

  Hi, on some sites of adobe muse, when I load, I get a mobile version of the site (on a laptop). I tried to remove the 'phone' and the words after that on the address bar and even cleaned my browser, but the problem still exists. What can be the reason? I am using Lenovo y50... help me please

  The y50 Lenovo is a hybrid and that manufacturers are especially ThinkPads, I guess that Adobe sees it as such is why you get the phone display.

  However, you can delete the 5876 to get a view of the desktop and all do it muse site

  for example, the home page

  change the /phone/index.html to businesscatalyst.com/index.html to see the office... I suppect you forgot the slash so delete/phone phone not only

  Office ex = yourweb page | Home

• I try to enter the serial number to register my software, but the label outside of the box, he's starting with the letters and it does not accept the letters... . Only numbers

  I try to enter the serial number to register my software, but the label outside of the box, he's starting with the letters and it does not accept the letters... . Only numbers

  Serial numbers contain no letters, so maybe it's your redemption code, for use on adobe.com to get your serial number.

  Here are a few links to look for more information

  https://helpx.Adobe.com/x-productkb/global/redemption-code-help.html#productboxorprepaidca rd

  Quickly find your serial number

• What to do when the subscription is unable to process after you enter the serial number and ID adobe

  What to do when the subscription is unable to process after you enter the serial number and ID adobe

  Contact support by phone / chat / web form.

  Mylenium

• The input microphone and WEBCAM microphone don't work

  Hey.

  I'm on HP Pavilion dv6 1330-er.

  The problem is - my microphone and webcam microphone worked fine until this morning from yesterday. The night before I was talking with my friend on Skype and then went to sleep. When I woke up - input mic webcam and mic were not working.

  I use Windows 7 Ultimate x 64

  Nothing like this has happened before.

  Video webcam itself works very well. Headset works fine.
  Tried to reinstall the driver - didn't work.

  Laptop resting on the table, just as I left it in the evening

  Have 2 different windows installed on my laptop (the other is windows XP, not a single program installed, a few drivers) - microphones do not work.

  The microphone even on different PC works fine.
  The system detects the headset microphone and webcam microphone and the system shows when I take micro helmet inside and out.

  I have no idea what's wrong with audio input. Maybe you guys can help, thank you.

  Hi again toxyyy,

  Thanks for the quick response!

  According to the information provided in your post, I advise you to follow this document on the use of the Recovery Manager to restore the software and drivers (Windows 7). This should restore the drivers software and hardware of origin provided with your computer. Once the software installation is complete, please follow this document on using the HP Support Assistant to update your system drivers.

  For the component XP from your computer, I recommend later in this document on the no sound (Windows 98, ME and XP). This should help to restore the sound on the side of the XP for your operating system.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Impossible to reach on the Adobe servers, please check the firewall settings and try again

  Impossible to reach on the Adobe servers, please check the firewall settings and try again

  Where download photoshop cc trail is said ^^

  I tried to add adobe through firewall

  I tried activation adobe inbound rules

  I tried to restart my pc

  Nothing works please help

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  A chat session where an agent can remotely look inside your computer can help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• On the opening screen that shows the box in and with the content on the left, all the choices of address as dispatch, trash, archive, I had the choice of opening

  I am 72 and silent... I lost the screen which displays the box of in and allows me to click on one and do it appear below the box together, and then I can either remove or etc... now to answer that I double click and then decide if I like the mail... I also lost a list entirte sort contacts

  Try pressing the F8 key - which lies on the line of the top of your keyboard.

• I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

  I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

  You can hide the menu bar in Firefox 3.6 on Windows, on "view > toolbars" or via the contextual right click menu on a toolbar.
  Press in and hold the Alt key to display the menu bar.
  Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select the toolbars to show or hide.

  See also what happened to the file, edit and view menus?