After re-connected catalog missing folder? MacBook

Similar Questions

• stop work after 30 seconds after the connection of 32-bit applications

  I have a problem that some of my 32-bit applications (vlc.exe, sapphireeffectbuilder.exe... etc) fail to start if I try after 30 seconds after the connection to windows. I managed to identify only a couple of processes that stop after 30 seconds of recording. These are:

  SearchProtocolHost.exe
  SearchFilterHost.exe
  IAStorIconLaunch.exe

  I'have tried to re-indexing and reinstall the intel RST service but no luck so far.

  I can see the vlc.exe in the system tray, but nothing of lance. Help, please. Thank you

  Hello

  Please contact Microsoft Community. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.

  This problem might have occurred because of these reasons:

  1 conflict between third-party applications.

  2 corrupt system files.

  3 virus.

  Try the steps listed here:

  Method 1:
  I suggest to start the computer using safe mode and check if the problem persists or not. If the issue happen not in Mode without failure, you can set up your computer in a clean boot and check if it helps.

  Step 1:
  Start the computer in Mode safe. At the start of the computer Mode safe with the minimum set of drivers and files.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:
  If the issue happen not in Mode safe, we will set up your computer in a clean boot state and check if it helps. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 2:
  If the problem persists, I suggest you to virus scanner to make sure that the computer is virus-free.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:
  (1) the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  2) if you run the virus scan of the program which is infected with the virus will be deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Method 3:
  If the problem persists, I would say allowing you to run the auditor of file system (CFS) analyze and check if it helps.

  Use the System File Checker tool to repair missing or corrupted system files
  http://support.Microsoft.com/kb/929833/en-us

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Certain things does not work after update MacOS Sierra on my Macbook Air 13 "Late 2010

  Drag between apps full screen, Mission Control and expose App are not working after update MacOS Sierra on my Macbook Air 13 '' end 2010. The problem because my macbook are not compatible with the current Mac OS or something else?

  Go to System Preferences > Trackpad and turn off and then on the ' shot between apps full screen» It should then work.

• Why don't I have easily select my questions open after the connection support?

  Why don't I have easily select my questions open after the connection support?

  When I connect support communities, I have still no clear idea where to find my support questions which remain open to check updates.

  Seems to me that this should be a great, distinct and separate button on the homepage of support after you have connected.  "My open issues Apple Community Support."

  Is this too much to ask?

  Steve

  1. Click / tap your username
  2. Click / tap 'manage subscriptions '.

  

• Thunderbolt not connect not not on MacBook Pro (early 2011)

  Hello

  I'm trying to connect my early 2011 MacBook Pro to a hub CalDigit Thunderbolt. The Mac does not see the hub at all.

  I tried the hub with Macbook Air from a friend, and it works fine, so I guess there is a problem with my Thunderbolt port.

  The Thunderbolt on the Macbook pro port doubles as a mini display port and that works very well when connecting to a screen, but it doesn't seem to work like a thunderbolt (despite the lightning on the port symbol) port. Here is the report system for love at first sight. I wonder if I have the right firmware. I've just updated (10.10.5) operating system and that has not solved the problem. The point to use the hub to get connectivity USB 3 as the Mac has only 2 USB ports. Any help much appreciated.

  

  When you have tested the hub Thunderbolt on your friend's Mac, did you use your cable?  Maybe that's the problem.  If this isn't the case, then try reset SMC and NVRAM:

  https://support.Apple.com/en-us/HT204063

  https://support.Apple.com/en-us/HT201295

  If no success, then the problem points to a hardware problem in the MBP.  Meeting in a bar in engineering of the Apple store for a FREE evaluation becomes your best option.

  Ciao.

• After I connect usb cable thro one ipod, firefox does not load, but other browsers work fine. ?

  Firefox works fine and is my favorite browser but after I connect ipod to my computer it will not load. Even after that the ipod has been deleted firefox always not load until the pc is rebooted.

  Yes, you must complete the process.

• 7.0.0.102 crashes immediately after the connection

  After update to Skype 7, it crashes immediately after the connection.

  I don't have facerig or FFsplit or any webcams. Update of Windows Firewall is disabled.

  The event logs show this:

  Name of the failing application: Skype.exe, version: 7.0.0.102, time stamp: 0x54897add
  Name of the failed module: Skype.exe, version: 7.0.0.102, time stamp: 0x54897add
  Exception code: 0xc0000005
  Offset: 0x00d527d7
  ID of the process failed: 0x1e7c
  Start time of application vulnerabilities: 0x01d029890c579caf
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Path of the failing module: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Report ID: 58eb96c6-957c-11e4-aae2-00224d806fdf

  Any ideas that I can do to make it work again?

  I don't know, but maybe it's one of several cases in the latest version of Skype 7.0 is not able properly to interpret data from the BIOS. At least, that was the issue with the cases already reported with this error message:

  Exception code: 0xc0000005

  Offset: 0x00d527d7

  A fix may be available in one of the next versions of Skype. In the meantime, the solution is to uninstall version 7.0 and install the 6.21.0.104 previous version.

  http://download.Skype.com/MSI/SkypeSetup_6.21.0.104.msi

• After have connected you, download applications, where you disconnect?

  After you connect and download applications, where you sign on?

  On your phone you can disconnect by typing on your ID at the bottom of the tab selected in the application from the App Store and then typing "logout" on the popup, or you can do this by tapping your id in settings > iTunes & App Store

• Outlook express hangs after the connection with the mail server

  OE6 hangs after the connection with the mail server?

  Make sure that the other machine is not check that the server so often a machine is not problems because it cannot be verified.

  Try to delete the account, compact the folders and close OE and reopen it and add the account back again.  Also make sure that the antivirus software is not interfere (see www.oehelp.com/OETips.aspx#3).

  You can also telnet to the server directly from this computer to see if it works (see http://techhelp.santovec.us/pop3telnet.htm).

  Sometimes it gets stuck in a message on the server and it can not get downloaded by OE, so it may be necessary to remove the message from the server, but if the other machine got, maybe it's not the question.

  Steve

• The FTP folder error when you try to connect to a folder on my Web server

  When I try to connect to a folder on my server using Windows Explorer, I get the following message...

  "Windows cannot access this folder.  Make sure that you typed the filename correctly and that you are authorized to access the folder.

  Details:
  A connection with the server could not be established.

  In the knowledge base, kb/260156 says it's because of me having reserved characters.  However, my password has no reserved characters.

  Can anyone help with this?

  Graham

  Hello
  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en/winservergen/

  It will be useful.

• XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  Hello

  Let us perform the steps below and check out them.

  a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
  b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
  c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
  d. restart your computer.
  e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After the connection to my computer today and to go to YouTube, I get this error message on my screen: "Microsoft Visual C++ Runtime Library error - failure of the Assertion.

  After the connection to my computer today and to go to Youtube, I get this error message on my screen.

  The assertion failed!

  Program:...
  File: common\npn_gate.ccp
  Online: 267

  Expression: pPluginShim

  I try to press abandonment and try again but nothing happen.

  Hi Shadwik,

  Thanks for the reply.
  I did as you said. It has been effective. But only to play the first video clip on youtube. With the next video, the error appeared again. I looked at the programs and saw the customer to be automatically updated to 11.3 flash...
  After that I tried to read a music video by realplajer and who has a problem too. by seeking out them in true originator, I founded there a conflict with the 1.3 flash payer... and disabling the Web download & recording of Realplayer was the solution finally.
  After that my PC works fine.

• I have norton antivirus online via my ISP and I had to disable, because it comes with an error that says "cable not connected or missing network adapter" I use dial-up.

  cable not connected network adapter

  I have norton antivirus online via my ISP and I had to disable, because it comes with an error that says "cable not connected or missing network adapter" I use dial-up and do not use any type of router and I'm not on a network. I also tried to disable my network card & it still says the same error. I have an internal network card that came w / the computer (NOT a PCI one) and I wonder if there is a cord or a plug inside my computer that must be plugged. I made some changes on the internal hardware and might have missed an and I didn't have to open my Tower if it wasn't. It's a big hassle! Help, please!

  Hello

  1. Once you get the error message?

  2. do you get the error when you try to disable Norton anti-virus?

  3. are you able to access the Internet explore?

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• After removing the Tdss rootkit, computer laptop My Windows Vista Home Premium keeps restarting after the connection. __

  I had the Tdss rootkit on my laptop and removed using TDSS Killer of Kasperky. After the reboot, I have connected and saw a box that displays "Please Wait". After 5 to 10 seconds, my computer restarts. After the reboot, it shows options for Windows Vista loading, i.e. the safe mode, safe mode with network. I chose the mode safe mode with networking and everything works fine. The system properties box opens automatically. When I try to boot into normal mode, he repeated restart after the connection. I tried to run a restore of the system into safe mode with networking, but it tells me something about the system restore is in mode offline. I hit a brick wall and don't know what to do next. I don't want to if I have more options to factory default restore.

  The TDSS rootkit is very destructive.  It is not uncommon to make a computer work is not properly after removing it.  I advise you to restore your computer to factory default.  Not only is this the best option, it's the safest option.  I wouldn't consider the computer to be trusted without going through the restore process.  Even if you can be sure that 100% of the infection has been removed, you have no way of knowing what changes the malware made to the settings on your computer, which may be exceptionally vulnerable to future malware attacks.

• How to display the login page after having connected the laptop WiFi

  Hello

  I checked into a hotel that offers Wifi access.

  The first day, I connected to the Wifi where I select the appropriate name of Wifi since connection manager and also enter the security key that was provided to me. The navigation was very good.

  But on the times later, once that I selected the name of Wifi is no longer is asking for the password. The report shows 'connected' (to correct Wifi Hotspot) but also says -online access Internet No.. (although the connection strength is 'Excellent').

  I have taken note of what happens sometimes when I connect to my Office Wifi as well. Sometimes, need not the password, he said still "connected" but also "no Internet access", and I'm not able to navigate.

  With the diagnosis has not helped.

  Y at - it a solution to the problem for example force Windows to display the password prompt.

  Thank you

  Sanjay

  Hello, Mr. Ray,.

  Thanks for posting your query in Microsoft Community.

  I understand that, even after be connected to the network once chosen, no internet is available. Generally, you are asked the password for the first time and the next time when you try to connect to the same WiFi network, it connects automatically without the password. However, there are several other reasons for not being able to access the internet thought that the device is connected to the same network successfully.

  I suggest to refer to the article below and check if the problem still persists.

  Wireless and wired network problems

  If the problem persists and you try to use the Wi - Fi connection in the hotel and office, this network would be connected to a domain or has administrator privileges. This is why I would recommend posting your query in the TechNet forums as your question would be better suited for IT Pro audience.

  Please post your question in the TechNet Forums.