After running jetpack.exe DHCP database

Similar Questions

• error at startup after virus cleaning: "!" Office could not load or run 'explorer.exe' specified in the registry. "

  Original title: Tidying to the top of my desk after riding it a virus

  After cleaning after infection by the virus qqlog whenever I log in, I get an error message; " ! Office could not load or run 'explorer.exe' specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry.  Explorers of two Windows Open C:\. And when I close the first error an another explorers of five Windows Open C:\.  Basically, I still have to do, but don't know how. Apart from the slowness of opening no other problems. Can someone give me help please.   Thanks Andrew

  Make sure you have backups of all important data for you (Favorites/internet Favorites, music, photos, documents, spreadsheets, presentations, drawings, numbers of series and product keys and installation to start with media) as soon as POSSIBLE.

  Format and start from scratch OR use the 'Restore Factory default' the manufacturer can give you.  Your stuff of restoring a backup after installation of your spplications on the machine.

  Why?  If this system is still messed up after cleaning a virus/trojan/worm/spyware/adware/malware - it may have to discover/waiting more moving and / ore actually operate 100% may take longer to restore to the Virgin (not to mention you can never achieve 100% otherwise.)

• Problem running the exe Islands after that that they are downloaded

  When I try to run an exe file created in CP3 on the web, I get the following error:
  NTVDM CPU has encountered an invalid statement, CS:Oddc IP:0592 OP:63 65 74 65 6
  
  I created exe for 4 quizzes created to the CP3, downloaded files and created links to them in a simple html page. All four files have been created in exactly in the same way, but I can't run one of them on the site.
  I tried to rebuild the file and re-upload and have recreated the link html errors. The file opens without a problem on the local drive.
  
  Any help on this would be much appreciated, I am at a loss.

  Hi niamhc

  In addition to what Eric offered, I would ask if you tried to clear the cache of your browser? Sometimes, a file is not from the intact server and must be downloaded again. Maybe it's the case here and empty the cache may change the behavior.

  See you soon... Rick

• SQL and shared Variable communication failure when you run an .exe application

  Salvation OR engineers,

  I'm faced with a problem. I have already tried almost everything under my bottom to solve, but I just couldn't get over it.

  I have a VI on my PC accessing a SQL database via the connection string and some share of variables in a server. Both shared variables and the SQL database are on the same server. There is a firewall between this server and my PC and the server is located in a DMZ environment.

  Design Labview environment, everything works fine. Even when I run the .exe on this computer file, everything works fine. But, when I created an application and install it on another computer, it just doesn't work.

  I'm using Labview 2013.

  Someone of you can help me with this bug?

  Thanks in advance!

  Hello world

  Back to share with you the solution:

  The problem was with the "SQL Native Client". Windows 7 doesn't have it as a default installation, if the application could not find the OLE DB provider for ODBC drivers. After installation, the connection has been established.

  As the server was within a demilitarized zone, I had to open some specific ports as follows:

  UDP/1434

  TCP / / 2343,49163

  59110-59115

  In fact, I have not experienced problems with the OAS. The error was generated when you try to connect to the database and sent to the rest of the code through the cluster of the error.

  Thanks for the support!

  Best regards to everyone.

  Luiz

• Unable to connect to the Internet after running COMBOFIX

  Under XP.  After running ComboFix to remove the "rootkit" virus"that wiped out AVG and some windows updates, I got online and downloaded AVG free 2012 and windows update.  Everything seemed fine and I shut down the computer for the nite.  Next day morning... can't get online!  When I try to connect it says "acquiring network address"... Help!

  I find the DHCP client.  It is not "STARTED".  I got it started and restarted.  Then, I went to the guest of cmd and tried to reset the TCP/IP stack.  Should not the command netsh int ip reset c:\resetlog.txt suggested... Windows help page I want to enter this command, press enter and he would immediately return to the following command-line (with no info)?  I typed in ipconfig/all and IP of Windows Configuration it is said... The active IP routing... N ° next to Proxy active WINS... No. I then typed in ipconfig / renew it said no operation can be performed on wireless network connection, although it has its media disconnected.   He said the same thing for the connection to the Local network?  What to do next! ??

  1. do you reinstall the latest version of the driver for your network card?

  2. don't ask you for help guided in a malware removal specialists forums that I have recommended?

  3. When you run "netsh int ip reset c:\resetlog.txt" in a command prompt window, nothing is displayed at the command prompt.  The TCP/IP stack is reset and log what is done is written to the specified file.  Have you looked in the file created at C:\resetlog.txt?  If so, did he say?

  4. have you looked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is an error indicated for your network card?  If you see the error icon, double-click the entry of the adapter and report, which is shown under "device status".

  5. the extract from the output of the ipconfig/all command what you have provided is normal.  Please provide the full results of ipconfig/all.  Right click in the window to prompt for the command 'Select all' then pres Enter copy selected data, so you can paste it into your reply.

• How do you do the command prompt window stay open after running a command?

  OK, I feel stupid asking this, because I knew the answer before. I learn Visual C++ programming. The book I learn to write C++ and past then in details on the writing of the GUI from Visual C++ part. The book that I market me through compilation and to make an exe file in a cpp file, and then he said: go to the directory in Explorer and double click on the exe file. I do, and the command prompt appears a quick second before closing down. The example in the book shows the output, and the writer obviously has his guest configured to pause after executing an exe file.

  I just set up my guest to do the same thing, so I can at least see the results. I know that running the exe I wrote, but I would like to see the output for less than a second.

  I don't know how you code this. But if it's like a normal batch or whatever it is command line related.

  Follow these steps to use a switch defined by the user at the end of the script.

  To pause a file of DOS commands under Windows XP, continue to the next command, you can use the PAUSE command. Make request to the user with the text:

  Press any key to continue. . .

  Then the batch file is waiting for the user to press a button. However, if you want to pause a batch file and display anything? Simply redirect the results to no one as follows:

  pause > null

  Given that it is perhaps not very useful (how will the user know they need to press a key to continue the batch file?) you display a different prompt. Issue a command with your desired guest ECHO, and then issue the break preceding > no command.

  For example, to pause a batch file of Windows XP with the prompt "Press ENTER to run the command", use the following commands:

  echo press ENTER to run the command
  pause > null
  MCP. MCDST. LVL 80

• Black screen - cannot run Explorer.exe with Task Manager

  Hi guys

  I've been Googling the answer to that for the last day and nothing seemed to work.

  Basically, my portable was working fine until this morning, when I restarted. After the home screen, just a rear screen with the mouse. CTRL ALT DEL and everything still works normally. I can run programs with the Task Manager, but can not run explorer.exe. He returned in the process for about 10 seconds then disappears. I think that it is the cause of the black screen. I tried downloading an own explorer.exe and replace the explorer.exe in C:\Windows\. My computer it did not as he said I need the permission of the administrator, but of course, I am the Admin so I don't know what that's all.
  I tried to restart in Mode safe and that works very well, still, I can't replace the explorer.exe in the C:\Windows\ because I do not have the administrative authorization. I tried to change it in the Security tab of the properties, or impossible.
  I also tried to update the driver software graphics cards, checked the Shell in the registry value and made sure it's explorer.exe, used the difficulty of black of Pevx screen, used HitmanPro and Windows Malicious Software Removal Tool to scan and remove malware. I even did a scf/scannow, checked driver C a mistake (which took 3 hours!), let Windows Startup Repair to fix things, tried a system restore but failed. He says that the anti-virus (Sophos) prevented the restoration of the system, so I've temporarily disabled its access scanning on but still unable to restore to a previous (11/01). Program changes that recent such as listed in the system restore is Google + Auto BackUp who came when set Picasa to date there 3 days and a more recent version of Facebook video call I've ever used. I am now running a scan with Sophos, not too promising.
  So yes, I tried everything. I think that now, there are only three options:

  1 somehow replace the explorer.exe in C:\Windows\ with this new cool explorer.exe, which I downloaded, with the permission of the administrator
  2. try another restore of the system, but I'm sure that nothing will happen, already tried three times.
  3 reinstall Windows 7 Edition Home Premium. It will be a real pain.

  So please help me! I have courses of due on Monday and this portable do not let me what that be done. Thank you!!!

  Please ignore the other my long answer. The problem has now been resolved.

  After trying all kind of scans, drinking and sobbing, I came across TDSS Killer from Kaspersky, who managed to catch a 1 latest unique malicious software (that I was too stupid and really looked hopeless and remember the name of), it cures the problem after reboot. Now, the laptop works well like you wouldn't believe. I'm still confused but way too happy now to care. Thanks a lot for your help nevertheless!

• Windows 7 will not run the exe files correctly.

  I tried to open a file with Notepad as I thought Notepad was the right program to open it. I used the "open with" prompt and select Notepad. It did not open, but immediately after, all single exe files had a picture of Notepad open with notepad and say various gibberish.

  After that, I managed to get on chrome right on the PIN I had attached to the taskbar, and then selecting an of my favorites.

  I looked for solutions and tried two different solutions so far, regedit solution and the Fix It solution.

  Later, I thought that maybe adobe would be able to run exe files, he then began to show an image of the software adobe reader on exe files.

  Now, every time I try to open an exe it lands open adobe reader and sitting there without understanding.

  I have restart after trying all the solutions and am now at my wits end to know what to do.

  .exe, .lnk and other types should not be associated with any program. If you're wrong them associated with a program, it always opens that particular program with the file name as argument. You can reset the UserChoice registry key for this file type. Check:

  Restoration. Association of exe in Windows 7/Vista after incorrectly associating it with another program

  http://www.Winhelponline.com/blog/exe-file-association-Windows-7-Vista/

• Can not run the .exe (not all exe) file

  Hello

  Have a problem when running the .exe file in windows 7.

  When I tried to open a 32-bit in my 64 bit OS setup.exe file, nothing happens at all. But when I tried the first time, a pop-up message displays this "want to re install using recommended settings. But after that, nothing happens. (the problem with only this file). But it works well in the other 32-bit OS. What should I do?

  Hello

  You can check this link troubleshooting steps:

  https://support.Microsoft.com/kb/2688326?WA=wsignin1.0

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  I hope this helps.

• The DHCP database could not be locked. Please retry the command later

  Hello

  I have this error message on my c4507R:

  "The DHCP database could not be locked. Please try the command later.

  Since I discovered the orders disappeared from the running configuration, DHCP

  so I just wrote again and he started to work very well.

  I googled why it happened, but I couldn't get the answer.

  Could you help out me if you have an idea?

  (Btw, when the error jumped, I use review of supervisor of redundancy).

  FOR INFO:

  https://Tools.Cisco.com/bugsearch/bug/CSCsw16698/?referring_site=SS

  Thank you

  This is a release of the star, so should be ok.  I don't know what is the issue.

• Characters not visible (caused by hitting the bar space or TAB in PL/SQL developer tool) causing slow running query? and database with low performance?

  Hi all

  I need your help to get this issue resolved its urgent and I'm not able to get to the conclusion. Here is my scenario, I'm getting slow query runs because of some non-visible characters that are copied with the application of the PL/SQL developer tool. Please find below attached screenshot: Oracle_Issue

  

  Note: This non-visible characters are caused when we write the query then us hit the SPACEBAR or press TAB PL/SQL developer tool

  I use the developer tool PL/SQL to write or test the query. Now I take this request copy paste in my application of the company (who takes this query connects to Oracle or any source of data base, catch data and produce PDF reports for customers).

  Now, my client is the Oracle user when I write and you run this query by the PL/SQL Developer, it works fine, but when I paste in my Inbox feature request (reporting system) and run it, it runs slower and jams to the customer database. Now after a little research I found that when I copy the query directly from PL/SQL developer at my request, he copy some characters not visible (introduced when we press SPACE or TAB in PL/SQL developer tool when writing query) with the request, then I copy this query again to my box of the application Notepad and delete these non-visible characters. Now, after removing the non-visible characters again once I copy backup question in my application and run the query, it works normally. Please find below attached screenshot: Oracle_Issue 2

  

  So I think that the cause of slow performance is due to some INVISIBLE CHARACTERS present in the query.

  My application uses SQL server 2008-2012 at the backend to store data from different sources.

  Character set used: SQL_Latin1_General_CP1_CI_AS

  
  

  To write and test queries: PL/SQL developer tool

  My Client use Oracle 11 g

  Character set used: Normal character: NLS_CHARACTER: AL16UTF16

  National Characeter: NLS_NCHAR_CHARACTER: WE8WIN1521

  I just wanted to know the blocking process to the top of the database and the characters not visible how affecting slow running query of query database.

  Please let me know if I'm missing something or you need more information on this issue.

  Thanks in advance,

  HP

  Simple answer. No.

  Spaces and line breaks do not change the execution plan created. Does not plan to run slower or faster.

• After running sql of the lot, it is disconnected

  Hi all

  I wrote a batch program to run a pl/sql procedure. But after running, it disconnects.

  But I want to continue in the same session

  echo exec tracer.trace_pck.start_('alter session set sql_trace=true') | sqlplus hr/hr
  

  Output:

  Press a key to activate tracing

  SQL * more: Production of liberation 11.2.0.2.0 Thu Oct 10 15:59:56 2013

  Copyright (c) 1982, 2010, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production

  SQL >

  PL/SQL procedure successfully completed.

  SQL > disconnected from Oracle Database 11 g Express Edition Release 11.2.0.2.0.

  Production

  Trace enabled successfully. Press a key for entry you sql

  If you use a batch file, I assume you are using windows OS.

  Essentially, what you need to do is call a sql file in the batch file and then download the sql file to call all the other files.

  Batchfile test.bat file test.sql sql calls

  sqlplus /password @test.sql

  test. SQL calls test1.sql and test2.sql and stops

  @test1.sql;

  @test2.sql;

  "exit";

  test1. SQL displays the current sid and serial No. FRO our name and our session

  Select 'test1', sid, serial # in session $ v

  where audsid = userenv ('sessionid');

  test2. SQL displays the current sid and serial for our name and our session No.

  Select "test2", sid, serial # in session $ v

  where audsid = userenv ('sessionid');

  When you run this you get t output similar to the following: (your SID and serial will be different)

  ' TEST SID SERIAL #.

  ----- ---------- ----------

  771 97 Test1

  ' TEST SID SERIAL #.

  ----- ---------- ----------

  771 97 test2

  It shows two separate sql files have been called, but are always in the same session

• Message after & quot; uninstall_flash_player.exe & quot;

  I have Windows Vista (without SP1)
  
  After you run "uninstall_flash_player.exe" pop-up window (Windows Defender can be...) told me that this program (just run) can be installed correctly and asked me:
  "Reinstall", "fix install" or "Cancel".
  
  What should I answer?
  
  p.s. This pop-up windows, I had them both after I uninstall Flash player 9 and one last week after uninstall, when I had still no Flash Player...

  This pop-up window was not the defender of Windopws, but was conducted from
  'Reports of problems and Solutions Control Panel Support'

• Apple Watch series 2: third-party Applications have control of gps, and exactly what kind of information you get when and after running?

  Third-party applications have control of gps, and exactly what kind of information you get when and after running?

  What I mean is can party like Strava apps or MapMyRun turn on and use the GPS for the courses?

  Also, the default running app, what kind of information you get? During the race, exactly what then I tell me? In addition, exactly what information can I see after I run? I would like to know whether or not she has the cadence.

  Last question: is it easy to verify my info running? Speed and natural lights?

  Thank you!

  Hello

  Information about the integrated training application - including data you can choose to display during training, and where the information is available to see later - are available here:

  • Work with your Apple Watch - Apple Support

  Cadence is not measured by the app to training.

  More information:

  http://www.Apple.com/Apple-Watch-series-2/

• After running a Norton PC Cleanup utility, some web pages are formatted incorrectly

  I had installed Firefox v17 and it was running. I installed a copy of Norton PC Tools and ran from cleaning that removes temporary internet files, cookies, and other things. After running Norton, some web pages do not properly format.

  Instead of the tags being placed in boxes or frames of real estate all of the web page, text, no image or graphic, appear and all the text displayed on the left side of the screen.

  This happens with only a few web pages.

  I tried the upgrade to Firefox v18 and also uninstalled and again installed v18. This has not fixed the problem.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  Please note that execution of third party tools as it not only can break things, it is not very useful. We recommend that you stay away from them.