After sVmotion, VM shows on the old and new LUN

Similar Questions

• Running the old and new Vcenters simultaneously on the same San

  We spend VSphere 4.1 to 5.5. We are very weak with only 3 hosts running about 20 comments of the virtual computer on a San.  Our former VM VCenter is always on Win 2003 and I am changing as well.

  So instead of doing an upgrade from 4.1 to 5.5 and convert the former vcenter 4.1, we decided to simply fill out a brand new VSphere 5.5 installation to a new server we have.  We have also installed a Vcenter 5.5 new appliance as well. So, essentially, we have installed two different vcenter, old and new running.  Then, we plan to move hosts esxi 4.1 existing in the new Vcenter device manually.   Then eventually fly over the guests of a host in the new box and then wipe and reload each older host with 5.5

  So I've already finished the first half of this project.  But I have a question.

  During the passage of Windows VCenter 4.1 to the new host esx and VCenter Unit 5.5. I run two VCenter (ver 4.1 and ver 5.5) simultaneously for a short period of a few days.  We're still running on the host 4.1 old and the new vcenter 5.5 running on the new esx host 5.5.

  We will walk a host both the old VCenter and will be added to the new Vcenter 5.5 appliance.  But I'll share my SAN alone of course. If I do this and the two versions of VCenter (old and new) running at the same time and sharing my data SAN even stores at the same time, are there problems with it?  I don't think so, but I'm not sure.

  I installed the first new esxi host and I pointed out to my warehouse of SAN data without any problem. And data warehouses has appeared as they should.  But when I add the new host for the new VCenter, as part of the installation process, it displays all relevant San warehouses.  I thought it was weird to show during the 'Add host' vcenter.  Are there restrictions to running two VERSIONS different VCenter simultaneously on the same data warehouses?

  Thank you.

  HMorris

  You can have multiple instances from running in the same environment vCenter server. What you need to take care of, it's that the ESXi hosts that share the same warehouses not have access to each and other virtual machines (i.e. do not add VMS to multiple hosts). Keep in mind that only VMFS3 data warehouses are available in two versions, do not pass the VMFS data store to VMFS5 when running always hosts v4.1.

  > as part of the installation process, it displays all relevant San warehouses

  That's ok. When you add a host to vCenter Server it will show that all connected, as well as the VMS data warehouses that are stored on this host.

  André

• How to turn off the old and new values for a plsql code

  Hi, when I run any code plsql as I age and the new value calls after execution how turn off...
  
  < pre >
  DECLARE
  V_Day VARCHAR2 (3): = TO_CHAR (TO_DATE ('& YourDate ',' DD-MON-AA '), 'DY');
  BEGIN
  IF V_Day NOT IN ("SAT", "SUN") THEN
  DBMS_OUTPUT. Put_line ("Have a Nice Day");
  ON THE OTHER
  DBMS_OUTPUT. Put_line ("' live the weekend");
  END IF;
  END;
  /
  < / pre >
  
  Enter the value of yourdate: January 31, 2010
  
  2 old : VARCHAR2 (3) V_Day: = TO_CHAR (TO_DATE ("& YourDate","DD-MON-YY'), 'DY');
  2 new : VARCHAR2 (3) V_Day: = TO_CHAR (TO_DATE ("January 31, 2010","DD-MON-YY'), 'DY');
  
  Enjoy the weekend
  
  HOW to left of these old and new guest values after execution...?

  SET VERIFY OFF

• To access the old and new values for alert trigger

  Dear all,

  I have a table ABC, when the user to back-end data updates must be inserted in table XYZ.

  And an alert must draw with OLD and NEW values.

  Can someone help me to achieve this goal.

  Thank you

  Thanks, SY, I didn't think about such a scenario!

  See you soon,.

  Vijay Sehgal.

• SQL * PLUS command to get rid of the old and new sqls when using and

  Hi all
  
  If we use "and in" any query sql in SQL * PLUS, we get the OLD and the NEW sqls as below. How can I get rid of them?

  SQL> select n.name,s.value from v$sesstat s,v$statname n where n.STATISTIC#=s.STATISTIC# and n.name in ('physical read bytes','physical write bytes','redo size','redo writes','session pga memory','sorts (disk)','sorts (memory)','sorts (rows)','undo change vector size','temp space allocated (bytes)') and s.sid=∈
  Enter value for in: 3
  old   1: select n.name,s.value from v$sesstat s,v$statname n where n.STATISTIC#=s.STATISTIC# and n.name in ('physical read bytes','physical write bytes','redo size','redo writes','session pga memory','sorts (disk)','sorts (memory)','sorts (rows)','undo change vector size','temp space allocated (bytes)') and s.sid=&in
  new   1: select n.name,s.value from v$sesstat s,v$statname n where n.STATISTIC#=s.STATISTIC# and n.name in ('physical read bytes','physical write bytes','redo size','redo writes','session pga memory','sorts (disk)','sorts (memory)','sorts (rows)','undo change vector size','temp space allocated (bytes)') and s.sid=33
  
  NAME                                                              VALUE
  ------------------------------------------------------------ ----------
  session pga memory                                              1199976
  physical read bytes                                               90112
  physical write bytes                                                  0
  redo size                                                           200
  redo writes                                                           0
  temp space allocated (bytes)                                          0
  undo change vector size                                               0
  sorts (memory)                                                        0
  sorts (disk)                                                          0
  sorts (rows)                                                          0
  
  10 rows selected.

  TIA,
  JJ

  Hello

  highlight:

  set verify off
  

  Herald tiomela
  http://htendam.WordPress.com

• Transfer of data from the old and new Mac

  Hi folks, I'm acquires a new iMac, PC (with Retina 4 K display 21.5 inch iMac) to replace my current iMac (21.5 inch, mid 2010). I sold my existing iMac and will have to ship power off before receiving the new unit, ergo, I won't be able to use the method of transfer of my data from the old to the new Mac.

  Accordingly, I am looking help form to advise me how can I do to preserve my existing Mac data so that I can install on the new Mac. In addition, how to delete all my data from the old Mac but preserve the OS X (El Capitan) and relevant applications.

  All of the advice and recommendations will be greatly appreciated

  1. create a Time Machine backup or clone bootable on an external drive, and then migrate your data from it.

  2. you need to remove El Capitan of the old Mac before send you it off and return it to the most recent of its original operating system or 10.6.8.

  (137493)

• How to save the old and new data

  Hello...
  
  I want to create a table that works even the concept of the Audit table.
  I want my table to be updated with the two old values n new values when a change is made.
  
  It is possible to do with it, using the features of audit table.
  
  Suppose that a user changes more than paid my table must capture the areas where changes are
  
  fact...
  
  I would also like to record the IP address of the specific system where is made the change/remove. How to get the ip address of the client system.
  
  My table structure
  
  Number of Sr_no
  DateTime varchar2 (15)
  VARCHAR2 (20) user_name
  TableName varchar2 (20)
  operation varchar2 (6)
  ip_address varchar2 (15)
  old_data varchar2 (20)
  you see varchar2 (20)
  
  
  Thanks in advance...
  
  
  with cheers
  Sprity...

  spirty...,
  As your username connects using their identifiers, capture this information in a set of global variables of forms (for example. OVERALL. UserID, OVERALL. Username, Global.PW, etc.), then change user to PAY. Since you switched the PAYROLL user at this point I guess that all transactions would be recorded against the user PAYS. Now, if you create an API to register the transaction audit, you can pass the pre and post values as well as the user information stored in your global variables from forms to the API to record the transaction on the real user account instead of the payroll account. I am considering this API as a fairly simple procedure of stored database that other takes a lot of individual settings for the new/old & user information or the stored procedure would preferably take a Ref Cursor (RC) or a Table PL/SQL of Records (PTR) with all the news, old and user information entered in the RC or PTR. This gives more flexibility and allows you to overload the procedure to handle any table need checked simply passing the name of the table concerned as one of the parameters to the procedure.

  Once again, my description is pretty generic because it is supposed to inspire your solution. The only real concern I have with the demands of your customers, it's you will need to enter their password. Why would they want the written in the verification of password table?

  I hope this helps.
  Craig...

• Merge the old and new accounts

  Hello together,

  I know this question has been asked many times in different ways, but I couldn't find an answer to my situation, please bear with me

  Line so my situation: I had a subscription on my private email (lets call it [email protected]) which is also linked to one account behance, once I started working for a company I could transfer my license to my email of company ([email protected]). This judgment company, license revoked of course etc. I don't NO re - sub with my email private ([email protected]), but I started working for a new company that made me a license on a new email ([email protected]).

  The question I have is that I can't use my old online libraries / sync settings of [email protected] or behance ([email protected] basically made a new behance account, which is not ideal because I don't need multiple accounts of behance).

  I hope that my question is to understand since its pretty odd to talk about 3 accounts.

  See you soon,.

  ALEKS

  Any question concerning regulations dealing with accounts must be processed through customer support.

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• old and new ipads appears in itunes

  Hi all
  Need a little help I backed up my Ipad Air to Icloud and for my PC

  I then unplugged my computer and plugged my new Ipad Pro

  I created the pro with the back to the top of the Air

  but now when I plug the Pro, in Itunes it shows that two connected ipads.
  I even changed the name of the pro directly on the machine.
  Now it shows me the old and new names and think that two ipads are connected

  I'm about to remove Air for ready for sale, but won't do so until I know this weird problem is resolved.

  Thank you very much

  Hmmm OK
  I studied a little further
  With disconnected TWO Ipads, as soon as I run Itunes, the former Ipad Air looks as connected

  If very strange

• Change the computer name in the network discovery, view old and new names and get error code 0 x 80070035

  I changed the computer names of computers each with windows 7 and a home network sharing. Network discovered each poster now the old and new names. I also have an error code 0 x 80070035.

  How can I get rid of the old names?

  Hello

  Are you able to access computers using the names?

  Step 1: Check out the link to learn how to delete the old name and create a new name:

  Change the name of your computer:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-computer-name

  Step 2: Refer to the section below for more information to correct the error 0 x 80070035 and steps.

  Open the homegroup troubleshooting utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Error 0 x 80070035 appears if you are not able to access the network computer. Follow the instructions in the thread below if you are faced with a similar question:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-error-0x80070035-when-trying-to-share/d8168c72-D51C-41C3-8B8F-3b6bb7f65f43

  It will be useful.

• Old and new picture in a picture

  Hi, I have a question about my college professor had previously showed to me. What it showed me was A PICTURE of herself when she was very young and next to it was a picture of herself when she was older and leaning on the younger version of herself. It's a little confusing when I explain, but its basically the old and new sound mixed in an image. What I thought I was crazy, it was when she showed us a picture of herself when she was older in terms of touching when she was younger. I would do this for my brother and his gf for Christmas. I am a major Digital Media Arts and am currently taking a class of photoshop, so I don't have an idea how to go on this issue, but not entirely!

  Thank you

  Jon

  This is a very good tutorial on how to add numbers to a portrait!

  I hope this helps!

  Julia

• Synchronization of the old Sync/News

  I installed Kubuntu on my computer at home and wanted to add synchronization to firefox.
  He continues to ask me an e-mail address and the password, but all I have is a user name and password.
  It is because of "synchronization of the old" and "new sync" I keep reading comments?

  I tried to separate my PC at work of synchronization of password/username, and now I have to disable my master password as well for this email and password synchronization work.

  1. is the synchronization of the former name of username/password combo?
  2. is the e-mail/password new synchronization?
  3. If the new synchronization does not work with a master password, how to use the synchronization of the former?
  4 is it possible (http://docs.services.mozilla.com/howtos/run-sync.html) always with new synchronization?

  I hope that answers your questions.

  1. which ended before Firefox 4 is released during the 'old sync' transition to become a built-in synchronization feature and is no longer an add-on called Weave. Many changes came in December 2010.
  He continued to work as long as the "username" was recorded in Firefox password manager, but the user had to remember the email address they used when they first created their sync account to be able to connect a new device. Overall, there was no problem for most users, they could always "pair" a new device - that e-mail address was not necessary to connect a new device "Pairing".
  2. Yes and no. But the new synchronization of 'Pairing '.
  3. you can as long as you have not updated your sync account. But you can no longer create a new account for "synchronization of the former.
  4. it's the good version of this article - to 1.5 Sync which is "new Sync:
  http://docs.Services.Mozilla.com/HOWTOs/run-sync-1.5.html

  BTW, the earlier or 'old' version was 1.1 - no idea exactly when the 1.0 version number has been used - and there was probably 0. versions # when it was known as armor and was only available as an add-on.

• From old and new details of triggering of a procedure or a generic function

  Hi all.
  
  I have an obligation to transmit all the old and new of a database trigger column information (for the purposes of this discussion, it will be a front line, insert, update and delete trigger) a procedure/function (either is fine).
  
  My first thought was to create a separate routine for each table, I want to implement this, which has a new and old input parameter for each column, but I realized that I needed a solution where the called routine should be generic (because we'll let other developers call the same routine and we do not want that they have to create their own version of the table).
  
  This is a problem because I want to implement this on all the tables could have a completely different columns (and dataypes). The called routine will operate under a pragma autnonmous_transaction (as will happen is committed) so I need to move all of the fields in all at once.
  
  Another idea I had was to create an object of type (potentially) 300 generic fields that I assign the values to the and pass as a parameter, however I never know before hand what types of data are needed, CLOB, DATE, VARCHAR, etc...
  
  I can anyone has any ideas on how achieve this with a generic routine?
  
  Kind regards
  Greg.

  Greg Block wrote:
  The called routine will do a lot of work, writing more than to connect the tables.

  Then I would be seriously concerned by using autonomous transactions. Are you sure you understand all the consequences of this? What happens if the appellant transaction is cancelled, for example, while your work is committed. Are you sure that will never make the system is in an inconsistent state. Are you sure that your routine will never be on the work engaged by the appellant transaction which will be more visible to the autonomous transaction? Are you sure you're never going to generate blockages with the parent transaction?

  Justin

• Old and new values caputure of forms...

  Hello...
  
  I want to create a table and a form that works even the concept of the Audit table.
  I want my table to be updated with the two old values n new values when a change is made.
  
  It is possible to do with it, using the features of audit table.
  
  Suppose that a user changes more than paid my table must capture the old and new shape to table values
  
  any ideas how to achieve... can you provide a code how to make this happen on the form.
  
  If the user updates the field parituclar on the form, then automatically it must copy the old value and the new value in the database
  
  would be happy if someone can provide examples of code... OnUpdate trigger
  
  Thank you
  ASP.

  It's a bit like your pseudo code:

  USER and SYSDATE are two pseudo columns in the database

  You can say, for example: old.emp_id,: new.emp_id
  to refer to the values in the line that is updated.

  for inclusion, there is none: old value and for a deletion there is none: new value

  the key is going to try...

• My mail disappears after I have read, closed the program and is about to double check my mail.

  Original title: endangered by email

  After that I changed my modem, I had problems with Windows Mail.  I called AT & T to let them know that I didn't want Windows Mail to my e-mail default system, yahoo... After some configuration, I could get to Windows Mail but from my mail goes away after I read it, closed the program and is about to double check my mail.

  No guarantee. Try this...

  Open Windows Mail > open the folder where the missing e-mail was before disappearing > above, click on view > in the pop-up box, click current view > click Show all Messages.

  Missing e-mail is re-appeared?