After the problem of the mesh warp effects - the mesh is not visible.

Similar Questions

• Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED".

  original title: HELP... (seniors not if nobody PC)!

  Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED" and then it lands in the updates page... So I used the Microsoft Fix - it tool and she is 'THE PLACE WHERE WINDOWS STORES DATA has CHANGED AND MUST BE FIXED... CHANGE OF PLACES in UPDATE from WINDOWS to THE SETTINGS by DEFAULT in WINDOWS'... well I think, but I don't know how the making and tool Fix - it didn't tell me how is... Please someone can help me to what is necessary.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2:

  Try to download the update from this link and install the update manually and check if it helps:

  http://www.Microsoft.com/download/en/default.aspx

  It will be useful.

• Programs can not be started, or no response after the computer was not awake mode "Eve"

  Dear Sir.

  My lap top is under the VISTA system. Now the problem is that all programs can not be started or no response after the computer was not awake mode "Eve". I have to restart the computer to recover the computer to normal state.

  Please please let me have your advice to return to my email address: * email address is removed from the privacy *.

  Thank you very much!

  Eric

  Hi Eric,.

  You can follow these steps:

  Step 1: perform a clean boot to verify if an application or service is causing the problem.

  See this article for more information on the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 article.

  Step 2: Configure the power settings for keyboard, mouse, and other devices.

  a. Click Start, click Control Panel, hardware and sound, and then click keyboard.
  b. click on the Hardware tab, and then click the properties button.
  c. click Change settings.
  d. click the power management tab and verify that the allow this device to wake the computer is selected.
  e. If "Allow this device to wake the computer" was not selected, select it and click OK.
  Follow the same steps for the mouse as well.

  If the problem persists, disconnect all non-essential devices (printers, scanners, USB drives). Restart the computer with only the original mouse, monitor, and
  connected keyboard. If this solves the problem of sleep/wake, one of the devices was causing the problem. Replace a device at a time and test to see if the
  problem occurs again. Continue adding devices and testing until you find the device that causes the problem.

  Refer to this article for additional troubleshooting steps.

  
  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista:
  http://support.Microsoft.com/kb/950686

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Uninstalled emet but after the applications would not start.

  Uninstalled emet but after the applications would not start. Internet Explore tries to start but flashes and disappears, even with Excel. Word starts but gets an error when you try to save. Lucky got Google chrome from another pc and installed so I can at least access the internet. Reinstalled Explorer, office repaired, cleaned the registry, but still no start. What should I do?

  A moderator has moved this thread to the programs Windows of Feedback Forum Forum.

  tried, nothing worked so I uninstalled office and re-installed from disc. Explorer 8 still does not work, but I uninstalled a with explore 7 updates and automatic update started and explore 7 worked. Thought I'd try installing explore 8 new. It worked, even if it failed with the Download Manager. Now all back to normal. I would be careful about the use of EMET, unless you know exactly what you are doing. Not a lot of faith in either the Download Manager.

• Windows calendar after the system restore notes no longer exist.

  The Windows calendar after the system restore notes disappeared forever, or can be found somewhere?

  Hello
  
  First we recommend that you search the .ics files confirm the windows calendar old files are present on the hard drive.
  Visit this link for more information: http://windows.microsoft.com/en-US/windows-vista/Tips-for-finding-files
  Windows Vista has an option to cancel the system restore. To do this, follow these steps.
  1. open the system restore by clicking the Start button, all programs, accessories, clicking System Tools, and then click System Restore.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. click on undo system restore and then click Next.
  3. proceed to review your choices and then click Finish.
   
  Your computer will restart. When you are finished, you will see a confirmation that the cancellation is complete.
  
  For more information, see this link: http://windows.microsoft.com/en-US/windows-vista/Undo-System-Restore
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is committed after the removal or not.

  Hi all
  
  I'm reviewing a bug in the application activity. Ongoing frequent deletions and I don't know if the validations are doing or not doing.
  I created a trigger to check what DML are executed on the table. I would like to know how can I change the trigger to see if the validations are performed after the deletions or not?
  
  Can anyone suggest how to catch if validation is executed after deletion or not?
  Reason why I do this: MY undo tablespace fills, and I do not know how to solve.
  
  see you soon,
  Malika

  Hello

  Please make the traceing session when the application run the query programmer.

  SQL > select s.sid, p.pid, p.spid
  v $ session s, v$ process p
  where s.paddr = p.addr and s.sid = 146

  SID PID SPID
  ---------- ---------- ------------
  2792 16 146

  SQL > setospid oradebug 2792

  SQL > oradebug Event 10046 trace context name forever, level 12.

  Let it run for 30 minutes around

  SQL > name context trace oradebug 10046 event;

  now format the tkprof with command below

  tkporf raw.trc new.txt sys = No.

  Check that the new.txt and you will come to know

  Here you'll be serious command that this user of the particlaur or execution of process

  Hope that I have answered your question

  Kind regards
  Rakesh jayappa

  Published by: Rakesh jayappa on September 21, 2010 02:26

• I try to install vista on my laptop but a letter of the key is not visible, all the other parts are very well including the serial code, is there another way to get the key of the other information?

  Taché product key

  Hello

  I try to install vista on my laptop but a letter of the key is not visible, all the other parts are very well including the serial code, is there another way to get the key of the other information? The laptop currently has non-OS I've tried to reinstall.

  Thank you

  Scott

  Product keys are bit-agnostic - they don't care if it's 32-bit or 64-bit.

  However, cannot legally use the recovery disk from one computer to a different constructor machine - as other licenses are not properly paid..

  There is nothing nonetheless to try all possible variations on the absence of character (there are only 25, after all the )

  Other than that, your best option is to contact the manufacturer and order a set of recovery disc for the machine. I do no download available for Vista with SP2 - but you can download Vista with SP1 and create the disc.

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

• I finally got CS2 installed on my system. But now the menu background color is black and the elements are not visible until the cursor is over them. It is very difficult to read. How can I change this?

  I finally got CS2 installed on my system. But now the drop-menu background color is black and the elements are not visible until the cursor is over them. It is very difficult to read. How can I change this? I tried to go into change preferences but it does not work

  I changed it to the value default them and that worked. Thank you very much

• Fluidity in the mode of the image is not visible in the magnification of 100% and above.

  Fluidity in the mode of the image is not visible in the magnification of 100% and above.
  It is perfect between 25% and 66%. If I disable hardware acceleration, it works but slow. Does not work with the PSD, jpeg, 8 or 16-bit. I have reset the PS. He had worked in the morning and stopped work hours despite nothing happened: I have no install or remove any software. My PS is clean, I do not use any add-on or 3rd party filter.

  
  All tips are appreciated.

  Thank you
  Gabor

  2009 end iMac i7 16 GB of ram, ATI Radeon HD 4850, OSX 10.8.3

  https://www.dropbox.com/sh/zy5gqaj0nrpr2yz/ZxgT4DBKQx

  A Mac video card with 512 MB of vram is marginal. A 256 MB card enable GPU mode to liquefy to work at all, even on the small images. The smaller image work about only works in CPU mode, make a smaller selection just the part of the image you want to distort and then start fluidity in CPU mode using the down option. It will be slow but should work. Get a stronger video card (more vram) would be the best solution.

• If the Photos are not Visible after their exportation from Photos for Mac

  Export of Photos may write JPGs invisible on the disc, if the photos are exported with the option ' file name: use the title.

  If the first affected user a title to the picture, the deleted the title text, photography will have an empty title and the exported photos will be simply named ".jpg" and treated as invisible system files.  This bug can fill the disk with lots of image files, which are not visible in the Finder, unless the hidden files are made visible.

  User bikedaveca reported this bug today:

  See discussion: exported photos do not appear in the Finder

  More in this tip of the user:

  Bug: export of Images with "file name: U title" exports the files as Invisible, if the title has been deleted

  As a precaution, keep at least one printable character in the title field, when when you remove a title from a photo, so you can see, she had a given title.

  As a test, import three new pictures, for example:

  

  The first has a title, the other had a title, but removed, the third one never had a title and watch "Untitled."

  When I select and export them with ' file name: use Title ", only two photos will be displayed in the Finder.

  The problem is, that deleting a title does not remove the title, but adds an empty title. If the photos are exported with the filename ".jpg".

  

• Condition on dashboard change - new status icon (to choose an analysis) of the article is not visible. Permission problem?

  Hello colleagues,

  We tried to put in place a condition on a section in a dashboard (Dashboard Edit-> drop down-> Condition Section Properties-> select the status-> "new condition" icon is not visible). As a general rule, this icon is present to choose an analysis and a condition of game to generate results in the table edge, but for some reason any, that it is not visible now.

  Is it a question of privilege or a permission? If so, please advise how to solve this access.

  P.S. attached screenshot

  Hello

  Responded to you on Linkedin. Hope that helps.

  Kind regards.

  Karamba.

• Share photos added to the photo library via the menu are not visible on the Photos

  Hello

  I started using DxO OpticsPro 10 to process Raw files. When I used the share menu in this application to "Add photo" pictures are exported but not visible in the Photos app. I see that they are in the photo library (Show Package Contents > Masters), but they are not visible in the Photos in the Photos app. However if I use "Export to Application" instead of "Add photo" in DxO OpticsPro the Photos app opens and the image is visible.

  You can't always do and changes directly to the photo library - you must use the program of Photos to import photos - adding photos to the library has no positive effect (and may even cause problems)

  LN

• The snapshots are not visible

  Hello!

  I have a problem after upgrading ReadyNAS OS version 6.6.0. After the upgrade I have no visible clichés, but the space is occupied for snapshots. I can't also create manual snapshot (screenshot). Help me, please.

  

  I solved my problem! I've upgraded (dist-upgrade) my NAS and after instant reboot are visible.

• half top of the textInput is not visible

  So, I'm working around the issue of text using qnxui.swc and QNXSKins.ane entry in Flash Professional CS6. Now, half upper text in my inputText field is not visible on the BlackBerry Z10.

  It works fine when tested in Control/Test Movie / In AIR Debug Launcher (Mobile), but after installation on the Z10 BlackBerry the textFormat makes the top half of the text disappears. The text is no textFormat tiny 8pt.

  Import qnx.fuse.ui.text.TextInput;
  Import qnx.fuse.ui.text.TextFormat;
  Import qnx.fuse.ui.text.TextInputIconMode;

  public var inputField:qnx.fuse.ui.text.TextInput = new TextInput();

  format = new TextFormat();
  format.minSize = 20 * screenscale;
  format. Color = 0x000000;
  format.font = "Arial";
  format. Bold = true;

  instformat = new TextFormat();
  instformat.minSize = 20 * screenscale;
  instformat. Color = 0 x 999999;
  instformat.font = "Arial";
  instformat. Bold = true;

  inputField.format = instformat;
  inputField.addEventListener (FocusEvent.FOCUS_IN, blackinputtxt);
  inputField.addEventListener (KeyboardEvent.KEY_DOWN, checkenter);
  inputField.width = 200;
  inputField.height = 100;
  inputField.text = thisname;
  trace (InputField.TextHeight);
  inputField.clearIconMode = TextInputIconMode.UNLESS_EDITING;
  inputField.x = s140;
  inputField.y = 20;
  inputField.maxChars = 11;
  inputField.restrict = "A-Za-z0-9."
  addChild (inputField);

  Thanks for the boost in the right direction. Apparently textInput.format must be set after textInput.text. In addition, do not use textInput.prompt that I couldn't solve the problem with command prompt. It's the only way I could get textInput to work without using the hack of the space. I guess it will be backwards compatible with the old BlackBerry OS 10 the textFormat cannot modify properties of text except the color.

  package
  {

  import flash.display.MovieClip;
  Import qnx.fuse.ui.text.TextInput;
  Import qnx.fuse.ui.text.TextFormat;
  Import qnx.fuse.ui.text.TextInputIconMode;
  Import qnx.fuse.ui.text.TextInputBase;
  Import qnx.fuse.ui.text.TextFormatStyle;

  public class textinputfix extends MovieClip
  {

  public var inputField:qnx.fuse.ui.text.TextInput = new TextInput();
  var format: TextFormat;
  var instformat:TextFormat;

  public function textinputfix (): void
  {

  format = new TextFormat();
  format. Color = 0x000000;

  instformat = new TextFormat();
  instformat. Color = 0 x 999999;

  }

  public void enterplayername(thisname___tring):void
  {

  var text = thisname;
  inputField.addEventListener (FocusEvent.FOCUS_IN, blackinputtxt);
  inputField.addEventListener (KeyboardEvent.KEY_DOWN, checkenter);
  inputField.width = 200;
  inputField.height = 50;
  inputField.text = text;
  inputField.clearIconMode = TextInputIconMode.UNLESS_EDITING;
  inputField.x = 140;
  inputField.y = 20;

  inputField.maxChars = 11;
  inputField.restrict = "A-Za-z0-9."
  inputField.format = instformat;
  addChild (inputField);

  }

  public void blackinputtxt(e:Event):void
  {

  inputField.removeEventListener (FocusEvent.FOCUS_IN, blackinputtxt);
  inputField.text = "";
  inputField.format = format;

  }

  public void checkenter(e:KeyboardEvent):void
  {

  If (e.charCode is 13)
  {

  internship. Focus = null;
  inputField.removeEventListener (KeyboardEvent.KEY_DOWN, checkenter);
  setplayername();

  }

  }

  }

  In this way, you can pass a string 'User instructions' inputText and it will appear grey. Once the user clicks the inputText field, instructions disappears and the text entered by the user will appear in black.

• Parts or all of the SVG graphics not visible when imported in FM 7.2

  Hello

  I scoured the forums and have not found all messages dealing with this specific problem.

  My problem is that when I import an svg eps file converted to FM (I 7.2 and 8 - same behavior for both), it's completely invisible or I see only parts of it. I noticed that the changes I made to the artificial intelligence image after the conversion to SVG (via "save under") are still visible in FM after import, just not the original content that has been converted to eps (or others such as .dwg and .ai). I am part of a team writing technology and we all know the same behavior, is not an isolated event. I should add that the problem seems to be intermittent, or at least I've not noticed a pattern. It is or it isn't.

  Any idea of what this could be the cause? I am very new to SVG and relatively new both Illustrator and FM, so I missed something obvious. Any help or advice would be appreciated humbly. Thank you.

  Sean

  The SVG import filter has been developed by Orbital Technologies for Adobe and converts the internal SVG FrameVector format. There has been a number of reports of flakey behavior and it seemed to suggest the grouped objects as a troublemaker as possible (something white when rendered transparent fill grouped).

  If you already have EPS files, then why are convert you to SVG for import in FM? DWG can be converted directly to PDF in new versions of Acrobat and these import properly in FM. In Illustrator, EPS recording will produce the best result on the FM band.

  [Additive]

  Also, SVG is essentially dead in the water as far as Adobe is concerned. The new flavor is FXG (which is supposed to support Flash). See: http://www.mikechambers.com/blog/2008/09/30/why-adobe-chose-fxg-over-svg/ as to why Adobe chose FXG over SVG for future development.