After the upgrade to 38.01, cannot display some web pages.

Similar Questions

• My computer says I am connected but my internet says cannot display this Web page

  Vista connection problem

  I have windows vista Home premium. my computer says I AM connected but my internet says cannot display this Web page. This isn't the site because I tried other websites

  Hello, Scottyookiss00,

  Launch IE without Add-ons

  Start > type Internet Explorer

  Select Internet Explorer (No Add-ons)

  You are able to access the site now?

  If so, reactivate the modules one by one to determine the origin of the problem.

  Try the steps here:

  http://support.Microsoft.com/kb/956196

• After the upgrade of Windows 10 cannot burn a DVD

  After upgrade to 8.1 Windows 10 I get the following message when I try to burn a DVD

  "Something is preventing a burn DVD success.

  Use the ISO, saved to the following location to burn your disc more later:

  Svc.ISO of C:\Users\Kenneth\Documents\2015-08-09 of worship.

  Is there a setting that I missed in the upgrade?  In addition, I can't locate the ISO image file mentioned or at least I'm not in this directory?

  osprey20

  What you describe is probably a problem first elements 13/13.1 you may encounter on Windows 10 64-bit or 64-bit Windows 8.1.

  It is it happened 10 Windows. I did the upgrade even you did and all of my programs to Premiere Elements survived successfully. One of the first things I checked after the upgrade was the burn on DVD-video on DVD and AVCHD on DVD.

  First Elements ATR troubleshooting: PE: Premiere Elements on Windows 10 daily discoveries

  From your description of your results, go to edit Menu/preferences/general and look at the effect with and without the following preference disabled

  "Use hardware acceleration (works on Intel HD Graphics 2000 or higher)"

  Also, go to the folder of encoded files and delete its contents (encoding of temporary disk files)? Make sure that this folder is located in an area with lots of free space on the hard disk. See change preferences/Menu/Scratch disks and disk encoding category that goes back to the hard drive folder of encoded files.

  Let us start here and then decide what then.

  Thank you.

  RTA

• After the upgrade to El Capitan cannot insert CD/DVD in external drive

  Hello

  I have a Macbook Pro (mid-2014 retina) and I have this problem since I upgraded to OS El Capitan. Now I have the last 10.11.5.

  I can't insert a CD/DVD in the external DVD drive. It gets stuck at the end when it is like 80% already.

  I searched on the web before and there was a workaround solution that you put the CD in and reboot and it would work and it is indeed, but it's a pain that every time I work on the Macbook and in the middle of something and I want to insert a CD that I have to close everything and restart to get the disc inside!

  Once I do that, it works fine and I can eject and insert it again normally, but the first time I have to restart first, and since it's an external drive, I have connected it all the time, so whenever I connect it, I have to redo this same process.

  I was hoping with the last update that this problem could have been resolved for me obviously it's a software problem because it came with the upgrade to El Capitan, I've improved in later, but still problem is there. I hope that someone would have reached a permanent solution for this and I would be really grateful to know it.

  Thank you!

  Sally

  The external drive does the same thing on a different computer, be it mac or windows? Also is what brand?

• After the upgrade to v 29 I get "Access denied" page now many pages

  Hello, I have just upgraded to Firefox 29, restarted the browser and now get a page saying "Access denied" trying to access many pages. For example, I get "Access denied" when you try to go to one of: http://www.reddit.com/, http://oss.sheetjs.com/, http://www.techtalkshub.com/how-to-write-clean-testable-code/and http://www.techtalkshub.com/essence-c-examples-c84-c98-c11-c14/.
  It happened before the upgrade to v29.
  This does not happen, for example, google.com, linkedin.com
  I am on Windows 7

  I try to clear your cookies and cache first and then try them "the proxy settings no" If emptying the cache does not work.

• After clicking on one of the results of Google search Firefox displays wrong web page

  If I click on any of the results of a Google search, I am taken to the wrong web page. When I go back and click again on everything is fine. It started a week ago. Re-loading of Firefox but its actually not difference.

  URL of affected sites

  http://

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0 .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

  Make a check of malware with a few programs to scan for malware.
  You must use all of the programs, because each detect different malware.
  Make sure that you update each program to get the latest version of the database.

  http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  http://www.superantispyware.com/ - SuperAntispyware
  http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
  http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
  http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  ..........
  See also 'Spyware on Windows': http://kb.mozillazine.org/Popups_not_blocked and what to do when searches take you on the wrong search site

• Computer displays Internet Explore cannot display this Web page?

  Computer shows the IE cannot display the page load?  I tried to go to google chrome and an error 310 (too mauger) redirects) help!

  This problem only recently begun? You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of internet connection problems reported for most, if not all, entry.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  - - - - - - - - - - - - -

  If you do not have McAfee then Windows update than kb2705219 can also be a cause as the uninstall that appeared to solve the problem for some users [but I'm not particularly convinced by this]. To uninstall an update - control panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.

• BlackBerry smartphones cannot display a Web page that has https

  I can't see a Web page that using secure server you connect (HTTPS) as my web email etc... It gives the error:

  Error HTTP 401: unauthorized, you are not authorized to view this page. Please try to load another page [page gave me 2 Option: OK / retail]

  Help, please

  Hello!

  Sorry... we must have missed your original post... can happen... we volunteer our time here and can't always be caught.

  I think you can set the browser configuration settings from. With the browser running application, the BBKey, and select Options. Inside there are a number of different configuration items... a combination of those that should work for your situation. Sorry, I can't recommend the precise combination - everyone has a different situation. But if I had to guess, I would say that the site you're trying to go is not correctly coded for a mobile web browser. But, in the configuration screens you can, change the way your storm browser identifies Web sites - find this setting and change it to something else (perhaps IE or FF). So maybe the site will interact correctly with your BB.

  Good luck!

• Firefox will not correctly display some web pages and addons can not be installed.

  I just installed firefox to the computer after the installation of the Windows 7 operating system.
  It does allow me to install an addon in the browser. In addition, it does not display the page addons firefox and github.com. (only plain html is displayed without CSS any kind of things)
  I tried to remove cookies, remove stuff history and running in safe mode. None of the methods worked.
  The web pages above perfectly displayed in other browsers on the same computer.

  Hello deamonpog, please make sure that your system date, time and timezone are correctly set!

• After the upgrade to el capitan, cannot print Canon mp970

  Upgrade to El capitan in snow leopard, and now I can't print from my Canon mp970. I went to the site Web of Canon for a printer driver is compatible with the new operating system - found nothing. Found some threads on Apple support community and found a suggestion that recommended to download and install the Gutenprint (CUPS + Gutenprint v5.2.11 - simplified pre2) software. I did that and removed the driver from Canon, but still cannot print. The message I get from the printer is: 'you need to install the software to use this printer. " To install the software, choose App Store... from the Apple menu. If the software for your printer is not available in the App Store..., contact the manufacturer of your printer. »

  Any suggestions on what to try next?

  Hi Dellis46

  I met the same problem and tried several things before finding the solution for the print job. You must install the drivers 'old' Mountain Lion. They still do the job.

  Go to: http://www.canon-europe.com/support/consumer_products/products/fax__multifunctio nals/inkjet/pixma_mp_series/pixma_mp970.aspx?type=drivers&driverdetailid=tcm:13-833845&os=OS%20X%2010.8%20 (mountain % 20Lion) & language = EN

  Download the .dmg package and open it. Dubbel click .dmg package and follow the instructions. Connect your printer by a usb cable and turn on the printer. If not now, it won't work!

  Then, go to the apple/menu logo and choose Preferences system - open printers & scanners - click on the button "+" under and on the left side.

  If the printer is on and the installation of the finished, .dmg package you should be able to see in a new menu 'Add printer' one or more printers. Add one you need. If your mac is connected to the local network you will see a usb and printer of netwerk MP970 canon MP970 canon (network printer takes a while to appear), including its network address. Add the two printers and name them differently to avoid confusion.

  Now everything should work.

  It is for the printer. I can't understand how making the scanner works. Run the .dmg package for the scanner is not operate :-)

  If someone is tried: http://www.canon-europe.com/support/consumer_products/products/fax__multifunctio (mountain % 20Lion) nals/inkjet/pixma_mp_series/pixma_mp970.aspx?type=drivers&driverdetailid=tcm:13-966569&os=OS%20X%2010.8%20 & language = EN

  I'd be more than grateful to the person who in fact occur...

  See you soon!

  Tjerri

• After the upgrade to R12 115102 cannot open the login page

  Hello

  We have improved and migrated our applications 115102 (on AIX) to R1211 (under Linux).

  We're stuck on a step where we run quick install and configure services on the system upgrade. All the post installation steps have passed State except the login page: rapidwiz log file says:

  -----------

  Check URL = http://ourhost.domain.com:8000/OA_HTML/AppsLogin

  RW-50016: error:-{0} not created:

  File = {1}

  All the world is facing this kind of problem before?

  Any suggestions are welcome.

  Thank you

  Ashish

  In addition to the above documents, please proceed as follows:

  -Check the Setup logs for more information about the error - how to locate the log files and troubleshoot quick installation for diffusion immediate 12.0.x and 12.1.x [452120.1 ID]

  'Startall Adopmnctl.sh"issue and check the status of services using 'adopmnctl.sh status', make sure that AutoConfig ends successfully.

  Thank you

  Hussein

• I'm trying to connect to the internet and I am unable to do so. My screen says Internet Explore cannot display this Web page. I missed something in the settings? He sees my wireless and says acquiring network address... but not to go further.

  I tried to diagnose, disconnect and reconnect

  You have left out information such as how you connect to the Internet (cable/DSL? ISP?), the brand of your router, and whether other computers can connect to your router wirelessly with success. Also, we don't know whether there is an initial Setup or if you had this before work and now it just doesn't.

  I'm going to assume that this is the first installation then give you instructions on setting up a safe wireless router. Maybe that will make things work for you. If you need more information, be sure to include all missing information in your next post.

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your modem.
  2. attach a class (usually supplied with the router) ethernet cable cat5e Internet/WAN port of the router to the ethernet port on the modem.
  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.
  4. turn on the modem. After that all the lights are on, turn on the router.

  To configure the router:

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing. MS - MVP - Elephant Boy computers - don't panic!

• using IE8 WINDOWS XP pro only some websites display the internet Explorer cannot display this Web page

  Especially the McDonald's Web site when you click on the first time career site. 2nd time, if you click on it will open

  is also very slow. Most of the other sites are ok.

  I had saw compatibility does not, since I checked put display up-to-date lists from microsoft

  & display intranet sites in compatibility mode I can view this website 2nd time round now

  I used to be able to display at all.

  Thank you

  Hello

  You can connect with McDonald's here: http://www.mcdonalds.com/us/en/contact_us.html

  Thank you.

• This program cannot display this Web page, how can I stop this coming on screen

  How can I stop this happening

  Hello

  1. when exactly you receive the error?

  2. What is the full error message you get?

  3. have you made a recent software or hardware changes to the system?

  You can perform a clean start and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  In addition, after you fix the problem, you can see step 7 above to restore your computer to a Normal startup mode.

• A Web site cannot be displayed more after the upgrade to version 14.01

  I use www.kpnvandaag.nl as a homepage. After the upgrade to version 14.01 this site and only this site will show no more. When go to this page, an error is displayed that says, translated freely: there is an error.
  This page cannot be displayed.

  What is a Web site or Firefox (or other causes) error?

  You may also need to check the settings I n your security software (Norton) to ensure that nothing is blocked.