After the upgrade to Windows 8, problem with teredo tunneling adapter says code 10 error and the device cannot start
Original title: teredo tunneling adapter error number 10 on windows 8
on my acer travel mate 6292 which I just upgraded to windows 8 pro recently got a problem with teredo tunneling adapter.
It says error code 10 and that the device cannot start, it made me unable to use wifi on my laptop
I tried to reinstall the driver but it just says: windows encountered a problem installing and he says its error code 10
Please help me
Thanks in advance
Hi Samuel,.
We appreciate your efforts to solve this problem. We will put all our efforts in order to solve the problem.
Teredo is a tunneling protocol designed to grant IPv6 connectivity to nodes that are located behind IPv6 NAT (network address translation) not compatible devices. It defines a way of encapsulating IPv6 packets in IPv4 UDP (User Datagram Protocol) datagrams can be routed through NAT devices, on the IPv4 internet.
I wish to inform you that Acer has not released Windows 8 compatible drivers for Acer 6292 travel companion.
I suggest you try to install the drivers for the card wireless in compatibility mode and check if it works. Check out the following link to download and install drivers in compatibility mode.
Make the programs more compatible with this version of Windows
http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows
The link below to download the drivers for the wireless card: http://us.acer.com/ac/en/US/content/drivers
A Code 10 error is generated in the Device Manager in one of the following situations:
1. the Device Manager cannot start the device.
2. one of the pilots who needs the unit does not start.
3 device Manager has sufficient information to recognize the error that spread upwards by the device driver.
We could try following common resolutions to solve the problem:
1. update the drivers for this device
2 launch a service of automated troubleshooting
3 contact material supplier technical support
For more information, please see the following article:
FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
http://support.Microsoft.com/kb/943104/en-us
In addition, this article could also be designated:
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-in/Windows/fix-network-adapter-problems#1TC=Windows-8
Please answer us on the State of the question to help you further.
Tags: Windows
Similar Questions
-
USB Mass Storage Device gives me the Code 10 error. This device cannot start
I have an external hard drive, Iomega Prestige 1 TB and one of the people at the school he fell from the top of the computer tower that resembled a fall of 30 cm, after it still worked, but then a few minutes later there not later he was still able to connect but it kept asking me to format it , so I wanted to try and find a way to get my data without formatting it. A day later I plugged the external hard drive, it started to beep for 5 min then it connected to the computer but unfortunately didn't show up in my computer, but he did it in the printer and peripheral. I checked my device manager and it showed a yellow explanation mark with the USB mass storage device. I went to properties and it says: "this device cannot start. (Code 10) "How can I solve this problem?
Hi AntonioDavism,
You can check if the following is useful.
Method 1: Run the hardware and devices Troubleshooter and check if that helps.
Method 2: Follow the steps in the below article mentioned and look for the question.
-
driver problem on teredo tunneling adapter device Microsoft
The message is that a driver problem has been detected on Microsoft device adapter tunnelling teredo, reinstall the driver. to try to reinstall the driver, I get the message "this device cannot start [code 10]."
I have Windows 7 home premium, any suggestion would be appreciated.
You have a "HP"?
If so, this may be of interest: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Microsoft-Teredo-Tunneling-Adapter-Code-10/td-p/4204314
Or see this thread for common solutions: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/troubleshooting-sony-vaio-windows-7-computer/177ed59b-028f-432a-b451-7c52e1ce6b6c
Quote:
The most common resolution is to update the drivers associated with the device. To do this, follow these steps:
a. in the device properties dialog box, click the driver tab.
b. click put to update driver to start the Upgrade Wizard to update the material.
c. follow the instructions to update the driver.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Note: You may be prompted to provide the path of the driver. Windows may have the built-in driver, or the driver files can always be installed since the last time that you have configured the device. If you are prompted for the driver and you don't have it, you can try to download the latest driver on the manufacturer's Web site.
Discussions:
Associated content
-
Upgrade vista to windows 7 ultimate and as a result the HDMI to the Tv link is not working. -the ATI MobilityRadeon HD 4300 Series shows the message that this device cannot start (code 10).
Downloaded ATI VGA Driver Acer laptop thie, but this does not seem to solve the problem.
Hello
Please follow the steps mentioned in the link below.
-
How can I fix the problem with teredo tunneling code microsoft error showing adapter 10.
I tried to uninstall and re install it, then changed to-peer automatic grouping, but nothing has worked.
It is a known problem if you have Zone alarm installed. If you have installed remove it at least to checkTo disable Teredo tunneling 6to4 interface open an elevated command prompt and type
netsh interface set terredo disabled state.To re - install- Click on start.
- Type Device Manager in the start search box, and then open it.
- Click the Action tab on top and click Add legacy hardware
then click next and next again, he will then scan and find nothing then click on the screen after that.
Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it.
To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.
-
in the Device Manager window.there is a (!) brand microsoft tun miniport adaptor.this device cannot start. (code 10) hmendezlopez
Hello
Control Panel - Device Manager - do right click on them - UNINSTALL - REBOOT
Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you wish
and on some computers, it will always be there but don't cause any trouble.On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
error message
http://support.Microsoft.com/kb/932520I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
IDT high definition audio CODEC. Error: the device cannot start (code 10)
Original title: IDT high definition audio CODEC
My Dell Latitude D620 has no sound control or (other than the system beep) volume, the volume control buttons do not work. When I uninstall and reinstall the IDT, I get an error message - "device cannot start (code 10).» Help!
Hello
1. have you done any change in software on the computer lately?
2. What is the brand and the model number of the sound card?Method 1.
Follow the procedure step by step in the article below and check.
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-WindowsMethod 2.
If the problem persists, follow the steps listed in the article below and check.
How to troubleshoot sound problems in Windows XP
http://support.Microsoft.com/kb/307918
Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.
I hope this helps.See also: related errors Description 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
The device cannot start code 10 - Pla of Turtle beach
Good, then all convenience stores and sites Web is telling me to re-install my drivers and restart. But the headset still does not work, the Device Manager just says "device cannot start (code 10)". This is after I reinstalled the drivers and rebooted several times. SO im stuck in a loop of told to reinstall the drivers, reinstall them and then told to the reinstall them again! Nobody seems to have a solution for the 10 Code, please help!
Thanks for the reply! However I fixed it!
I was really stupid with my good treatment. Everything I needed was audio input for headphones via a left/right audio cable (red/white ones). I was completely stupid. Well I fixed it!
See you soon,.
Harry. :)
Edit: in other words, it wasn't a driver issue, it's that I didn't have the correct wiring, now I do. So it's fixed!
Thank you!
-
Windows 8 problem with wireless network adapter
I had a lot of trouble to stay connected to the internet with my college wireless network on
my laptop Windows 8. Especially when my computer is endearing to load a large number of data, the connection becomes limited and stops working. I use the resolution of problems and there's always the wireless adapter, which always solve the problem. This problem will not occur on the unsecured network comments from school or home. I tried many solutions to solve the problem, as going to tab the wireless one adapter power management uncheck allow the computer to turn off this device to save power. nothing has worked so far. Here are the details of the detection of the troubleshooter from the last time that this problem occurred:
Details about network adapter diagnosis: Network adapter Wi-Fi driver information: Description . . . . . . . . . . : Dell Wireless 1704 802.11b/g/n (2.4GHz) Manufacturer . . . . . . . . . : Broadcom Provider . . . . . . . . . . . : Broadcom Version . . . . . . . . . . . : 6.30.59.74 Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem51.inf Inf File Date . . . . . . . . . : Monday, September 17, 2012 6:52:18 PM Section Name . . . . . . . . . : BCM1704HMD_NT62 Hardware ID . . . . . . . . . . : pci\ven_14e4&dev_4365&subsys_00161028 Instance Status Flags . . . . . : 0x180200a Device Manager Status Code . . : 0 IfType . . . . . . . . . . . . : 71 Physical Media Type . . . . . . : 9
Diagnostic information (wireless connectivity)Details about wireless connectivity diagnosis: Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Connection incident diagnosed Auto Configuration ID: 1 Connection ID: 1 Connection status summary Connection started at: 2015-03-08 14:48:33-522 Profile match: Success Pre-Association: Success Association: Success Security and Authentication: Success List of visible access point(s): 7 item(s) total, 7 item(s) displayed BSSID BSS Type PHY Signal(dB) Chnl/freq SSID ------------------------------------------------------------------------- 28-8A-1C-FE-CA-80 Infra
-91 1 smcm-guest 28-8A-1C-FE-0D-80 Infra -50 1 smcm-guest 28-8A-1C-FE-0D-82 Infra -54 1 resnet 28-8A-1C-FE-B5-C0 Infra -48 6 smcm-guest 28-8A-1C-FE-B5-C2 Infra -47 6 resnet 28-8A-1C-FE-3F-40 Infra -91 6 smcm-guest 28-8A-1C-FE-3F-42 Infra -88 6 resnet Connection History Information for Auto Configuration ID 1 List of visible networks: 2 item(s) total, 2 item(s) displayed BSS Type PHY Security Signal(RSSI) Compatible SSID ------------------------------------------------------------------------------ Infra No 87 Yes smcm-guest Infra Yes 87 Yes resnet List of preferred networks: 5 item(s) Profile: mobilenet SSID: mobilenet SSID length: 9 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: NETGEAR30 SSID: NETGEAR30 SSID length: 9 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: Yeager Network SSID: Yeager Network SSID length: 14 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: Yes Profile: smcm-guest SSID: smcm-guest SSID length: 10 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028001 Information for Connection ID 1 Connection started at: 2015-03-08 14:48:33-522 Auto Configuration ID: 1 Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Pre-Association and Association Connectivity settings provided by hardware manufacturer (IHV): No Security settings provided by hardware manufacturer (IHV): No Profile matches network requirements: Success Pre-association status: Success Association status: Success Last AP: 28-8a-1c-fe-b5-c2 Security and Authentication Configured security type: WPA2-802.1X Configured encryption type: CCMP(AES) 802.1X protocol: Yes Authentication mode: User only EAP type: Authentication not started Number of 802.1X restarts: 0 Number of 802.1X failures: 0 802.1X status: Success Key exchange initiated: Yes Unicast key received: Yes Multicast key received: Yes Number of security packets received: 13 Number of security packets sent: 13 Security attempt status: Success Connectivity Packet statistics Ndis Rx: 400791 Ndis Tx: 204956 Unicast decrypt success: 0 Multicast decrypt success: 0 Unicast decrypt failure: 0 Multicast decrypt failure: 0 Rx success: 1632 Rx failure: 846 Tx success: 240 Tx failure: 0 Tx retry: 24 Tx multiple retry: 12 Tx max lifetime exceeded: 0 Tx ACK failure: 60 Roaming history: 0 item(s) Diagnostic information (wireless connectivity)Details about wireless connectivity diagnosis: For complete information about this session see the wireless connectivity information event. Helper Class: Auto Configuration Initialize status: Success Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Result of diagnosis: There may be problem
Diagnostic information (wireless network adapter)Details about wireless network adapter diagnosis: For complete information about this session see the wireless connectivity information event. Helper Class: Native WiFi MSM Initialize status: Success Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Connect even if network is not broadcasting: Yes Result of diagnosis: There may be problem
Thanks for any help! It happened for about eight months and it's really frustrating.
Hello
Check with Dell and Broadcom, their documentation diagnostics online and drivers.
and ask questions in the forums about known problems. The two Dell driver update, then
Broadcom if there is more recent.Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/Dell PC Diagnostics
http://www.Dell.com/support/Diagnostics/us/en/19/
Broadcom - downloads and Customer Support
http://www.Broadcom.com/support/==============================
More troubleshooting:
It is possible that the drivers you use, even if later now available, are not
100% Windows compatible 8.1. Check with the manufacturer of your system (motherboard support
Manufacturer of custom systems) and/or the manufacturer of the device. This one, like Intel,
RealTek, Atheros and others may have newer versions is not available to the mother of system
-site of the manufacturer on board. And continue to check in with them regularly over the next year.
Also update the BIOS, drivers from the chipset of low level and major embedded and separate
device drivers.Download your applications and devices in Windows 8.1
http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working=========================================================
Don't forget to check the updates of the firmware on the router, because who can have a definite effect
on connections Windows 8.1 same if other OS systems connections are fine.Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) and/or
the manufacturer of real device driver updates. If there is no newer versions re - install the same
ones. Ask known in their forums (if any) problems.===================================
General resolution: (after the above if necessary)
Free Wi - Fi and wireless problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Note the use of Win Key + X and Win Key + W (to access control panel, run,
and settings according to needs). Win + D key calls to the office and use
Win Key activates / deactivates the desktop and start screen.--------------------------------------------------------------
Control Panel - Network and sharing Center - solve problems
References to Vista also apply to Windows 7 and Windows 8.
Your router be guess here, you have successfully updated the firmware a possible
solution? And I would update your WiFi drivers on computers. How far away are they
you have set in the router? Are there obstacles in the path?Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click
top - tab of the driver - write version - click on update driver (can't do
nothing that MS is far behind the certification of drivers). Then right click on the Wifi
Device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system Maker you can see the same device manufacturer
more recent versions. (Those become your fonts of rescue system manufacturer).Repeat for network (NIC) card and is a good time to get the other update
Drivers Windows 8 like updated drivers.The adapter in Microsoft Windows 8/8.1 network problems - how to fix? (Do not forget to see
This section-> update the NIC driver).
http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problemsDrivers and Microsoft - Windows 8/8.1 - material
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Microsoft Windows 8/8.1 - Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceMicrosoft Windows 8/8.1 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly
------------------------------------------------------Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - set up a new connection or network
-----------------------------------------------------
And:
TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/Microsoft - Windows 8/8.1 - Web & Networking
http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8Microsoft - Windows 8/8.1 - Wi - Fi & Networking
http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1-----------------------------------------------------
Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slowMicrosoft - Windows 8/8.1 - wired and wireless in Windows problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Original title: Lenovo SL500 Windows Vista crashed with STOP error message and won't start
Hello peoples,
I just installed an iMicro Bluetooth adapter on my computer, and then I wanted to restart my computer. When I turned it on, loading like regular until right after the Vista loading screen, when the Blue Screen of Death (a blue screen with an error on this subject) flashed for about 1/2 second and then restarted my computer. Then he asked me if I wanted to load startup repair or simply start WIndows normally and I chose to start WIndows normally, but it's the same thing, so when the computer is restarted again, I chose the Startup Repair. He said that if I inserted an external device in my computer for me to remove it. But I had no external devices in my computer at the same time! I already pulled the iMicro adapter! So when my computer restarted again, I pressed the button Lenovo Care and charge of Lenovo Rescue and Recovery 4. (This is where I am now, typing away in the Opera browser.) I tried to find help, but could not find anythign useful so far. I installed for many drivers, updates, patches, etc. But none have anything to remove the blue screen of death. Now, after 7 hours, I really frustrated, and this is my last hope! (I don't want to save my hard drive and reinstall, because I paid more than 250 applications and more than 270 free programs on my computer! Of more, more than 350 iPad apps, of which a few are paid! Oh and 700 iBooks!)
Help, please! I'm really desperate right now, and any help would be appreciated!
Thanks in advance!PS I run Windows Vista Home Basic SP2 (I think) on a Lenovo ThinkPad SL500 (NOT SL500c!)
PPS Lenovo all computers have this Lenovo Rescue Recovery 4, which is like an operating system of its own. It has a browser that you can install updates and other things. Right now I use Rescue and Recovery. Thanks again in advance and please answer my question! I had this problem for a week and I'm in school tomorrow! Thanks again!
EDIT: The error message went like this:
A problem has been detected and Windows has shut down to prevent damage to your computer.
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check for viruses on your computer. Remove the hard drives newly installed on the hard disk controllers. Check your hard drive to ensure that it is configured and completed proeprly. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Technical information:
STOP: 0X0000007B (0X80599BB0, 0XC0000034, 0X00000000, 0X00000000)
Thanks for the billionth time!
have you tried diving into the blue tooth to the computer with a usb cable before starting the computer u? Sometimes it works
-
Backgound App should start after the device to start
Currently, I made soft to work by clicking on it, now I want to do as a background
Problem:
(1) I want my app to start after starting the device is finished.
Personally, I don't like the method of 'sleep' suggests BBDeveloper, and which is also in a KB article.
Search the knowledge base for this and the reason why you may need to use alternatives.
I'd rather have a listener and use the method of power if the unit is start-up.
If this issue is related to a Thread of yours that I have already commented on, there is no need for you to worry if you are inStartUp or not - your background code will run OK.
-
I need help. suddenly I have no sound. the error I got was "no audio device" Microsoft Fix it Center found problem but did not set. Just says "problems with noise and acoustics. No sound"but the situation is"not fixed ".
What can I do? really appreciate some good advice on how to fix or how to get it fixed.
I need help. suddenly I have no sound. the error I got was "no audio device" Microsoft Fix it Center found problem but did not set. Just says "problems with noise and acoustics. No sound"but the situation is"not fixed ".
What can I do? really appreciate some good advice on how to fix or how to get it fixed.
I would appreciate if you visit this web site.
http://support.Microsoft.com/kb/943104
Answer please, if you face any problem.
K M JAI Support general (INDIA)
-
Re-installing CS3 on computer upgraded to Windows 10 - problem with serial number
I rebooted just CS3 after installing Windows 10 on my laptop. When I enter the serial number, I get a message that says that the number is not valid.
Error: "serial number is not valid for this product". Adobe Creative Suite
-
TEREDO TUNNELING ADAPTER DRIVER PROBLEM
I RECENTLY HAD A PROBLEM WITH PRINTING AND DISCOVERED THAT MY TEREDO TUNNELING ADAPTER HAD A YELLOW ERROR SIGN BY IT. I GOGGLED THE PROBLEM AND REMOVED THE DRIVER AND RE-INSTALLED. THERE IS SAME PROBLEM. NOW I HAVE ADDITIONAL PROBLEMS. WHEN I STOPPED, MY COMPUTER SHOULD APPLY THE UPDATE OF OPERATIONS 50218 0F 50218 AFTER ALL THIS UPDATES AND IT SHOULD PREPARE TO SET UP WINDOWS.
HE NEVER DID THAT BEFORE. I DON'T KNOW WHAT TO DO AND I'M AFRAID I'LL MAKE MATTERS WORSE TO TRY THIS AND TRY THAT. I NEED ADVICE SO SURE? DOES ANYONE KNOW WHAT I NEED TO DO?
Thank you!
Hello
If the printer works not very well, is that so don't worry about the warning message. Generally, you will get the error message if you have any problems with the drivers.
-
PnP and Microsoft Teredo Tunneling adapter networking-related problems, error code: 10
I've had this problem for awhile now. A user on Windows 7 Help Forums also helps me with this problem. My tunneling adapter throws Code 10. I tried to update the driver software, but it is said that he decided that my software for this device is up to date. My Internet connection works fine. Microsoft Help, with Maxie's help with the other forums site would be greatly appreciated.
Hi Jesse,.
Please keep us updated on the status of the issue.
We are troubleshooting problem Launch Manager.
I did some research on this issue and found that, if the device driver is updated in an appropriate manner, and then Launch Manager may stop working correctly.
So I would say as a work around update you all the device in Device Manager driver and check if it helps.
Hope the helps of information.
Please reply with the results, in order to help you solve the problem.
Thank you
Very well. I reinstalled it, and so far it worked for 2 days and a half. So, I hope that it continues to work. If it isn't, then I will do what you suggested.
Thanks for your help,
Jesse Williams
Maybe you are looking for
-
Calls to keep ending when I answer. Help, please
Hey guys,. When I get an incoming call on my iPhone 6 and I slide pick up or press on the answer button, the call ends automatically. I tried to call my phone at home and on the outgoing line it doesn't even sound, and when I answer my phone, the lin
-
Cannot open any office files or icons, the Panel even not. Help!
HelloI really need help desperately. I can't open any office files or icons. I restored to the point the closest that I can, but no difference. Cannot open the Panel even from the Start button. My compuetr crashes every time I double-click or right-c
-
What is Motion model tool for?
Hi, I have I learn the FCPX, went to see a lot of site with plugins. And someone has recommended to use MTT, motion model tool. Can someone tell me what is this tool because I would be grateful. It is manual, but llooks complicated. Thank you
-
Hallo zusammen Wenn ich das MacBook hochfahre und mich sign in respect will be, muss ich das password 2 x typing. Daher wanted ich questions, ob dies ist normal? Offers wanted ich wissen, ob are auch eine possibility gibt, dass das join nach dem Star
-
Cannot download the software for HP OJ6500A 710n either online or from disk
My printer will not suddenly find my computer. I have frequent problems but now no recognition at all of computers. Relocation of the proven software and I can not get to install. PERIOD! Tried to uninstall and reinstall and HP won't uninstall? Tried