After the upgrade to Windows 7 Ultimate HD 4300 ATI Radeon - the device cannot start (code 10)

Similar Questions

• IDT high definition audio CODEC. Error: the device cannot start (code 10)

  Original title: IDT high definition audio CODEC

  My Dell Latitude D620 has no sound control or (other than the system beep) volume, the volume control buttons do not work. When I uninstall and reinstall the IDT, I get an error message - "device cannot start (code 10).» Help!

  Hello

  1. have you done any change in software on the computer lately?
  2. What is the brand and the model number of the sound card?

  Method 1.
  Follow the procedure step by step in the article below and check.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2.
  If the problem persists, follow the steps listed in the article below and check.
  How to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918
  Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.
  I hope this helps.

  See also: related errors Description 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The device cannot start code 10 - Pla of Turtle beach

  Good, then all convenience stores and sites Web is telling me to re-install my drivers and restart. But the headset still does not work, the Device Manager just says "device cannot start (code 10)". This is after I reinstalled the drivers and rebooted several times. SO im stuck in a loop of told to reinstall the drivers, reinstall them and then told to the reinstall them again! Nobody seems to have a solution for the 10 Code, please help!

  Thanks for the reply! However I fixed it!

  I was really stupid with my good treatment. Everything I needed was audio input for headphones via a left/right audio cable (red/white ones). I was completely stupid. Well I fixed it!

  See you soon,.

  Harry. :)

  Edit: in other words, it wasn't a driver issue, it's that I didn't have the correct wiring, now I do. So it's fixed!

  Thank you!

• No its "No. Audio Device" IDT High Definition Audio CODEC. (The device cannot start code 10) location 65535 internal high definition audio

  I need help.  suddenly I have no sound. the error I got was "no audio device" Microsoft Fix it Center found problem but did not set. Just says "problems with noise and acoustics. No sound"but the situation is"not fixed ".

  What can I do? really appreciate some good advice on how to fix or how to get it fixed.

  I need help.  suddenly I have no sound. the error I got was "no audio device" Microsoft Fix it Center found problem but did not set. Just says "problems with noise and acoustics. No sound"but the situation is"not fixed ".

  What can I do? really appreciate some good advice on how to fix or how to get it fixed.

  I would appreciate if you visit this web site.

  http://support.Microsoft.com/kb/943104

  Answer please, if you face any problem.

  K M JAI Support general (INDIA)

• After the upgrade to Windows 8, problem with teredo tunneling adapter says code 10 error and the device cannot start

  Original title: teredo tunneling adapter error number 10 on windows 8

  on my acer travel mate 6292 which I just upgraded to windows 8 pro recently got a problem with teredo tunneling adapter.

  It says error code 10 and that the device cannot start, it made me unable to use wifi on my laptop

  I tried to reinstall the driver but it just says: windows encountered a problem installing and he says its error code 10

  Please help me

  Thanks in advance

  Hi Samuel,.

  We appreciate your efforts to solve this problem. We will put all our efforts in order to solve the problem.

  Teredo is a tunneling protocol designed to grant IPv6 connectivity to nodes that are located behind IPv6 NAT (network address translation) not compatible devices. It defines a way of encapsulating IPv6 packets in IPv4 UDP (User Datagram Protocol) datagrams can be routed through NAT devices, on the IPv4 internet.

  I wish to inform you that Acer has not released Windows 8 compatible drivers for Acer 6292 travel companion.

  I suggest you try to install the drivers for the card wireless in compatibility mode and check if it works. Check out the following link to download and install drivers in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  The link below to download the drivers for the wireless card: http://us.acer.com/ac/en/US/content/drivers

  A Code 10 error is generated in the Device Manager in one of the following situations:

  1. the Device Manager cannot start the device.

  2. one of the pilots who needs the unit does not start.

  3 device Manager has sufficient information to recognize the error that spread upwards by the device driver.

  We could try following common resolutions to solve the problem:

  1. update the drivers for this device

  2 launch a service of automated troubleshooting

  3 contact material supplier technical support

  For more information, please see the following article:

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  http://support.Microsoft.com/kb/943104/en-us

  In addition, this article could also be designated:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-in/Windows/fix-network-adapter-problems#1TC=Windows-8

   

  Please answer us on the State of the question to help you further.

• in the Device Manager window.there is a brand of (!). Microsoft tun miniport adaptor.this device cannot start. (code 10)

  in the Device Manager window.there is a (!) brand microsoft tun miniport adaptor.this device cannot start. (code 10) hmendezlopez

  Hello

  Control Panel - Device Manager - do right click on them - UNINSTALL - REBOOT

  Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you wish
  and on some computers, it will always be there but don't cause any trouble.

  On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
  ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
  error message
  http://support.Microsoft.com/kb/932520

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• We get an error "this device cannot start" Code 10 on Windows 7.

  Original title: USB not recognized verified work storage device

  I have a 8 GB USB Flash drive that has, until recently, worked perfectly on several OSes including Windows 7 and 8. Recently, the player does not seem to want to work on one of my installations of Windows 7 on a PC (HP EliteBook 8470p).

  I tried to reinstall the drivers for it on my machine specific windows 7 that does not work on. Device Manager gives me "this device cannot start. (Code 10) "even after reinstalling the drivers and reboot several times. I use also some virtual machines in Windows 7 and 8 on the same PC, and when connecting virtually the USB key to the virtual machine to Windows 7, I can't detect it. When you connect the device to the virtual machine from Windows 8, I can access the files and even format, so the USB ports on my computer are all functional.

  To summarize, the device works in Windows 7 and 8 separate facilities of this computer, but does not work on 7 on my TI, if the main or virtualized operating system. The VM of Windows 8 on this computer can recognize the device.

  Thanks for the answer, except that I discovered the problem. I checked upward in the disk management window, and I saw that the reader, for some reason, was not assigned a letter. After you manually assign the drive letter, all data on the disc is now available. Thanks anyway.

• Internet connection problem hp dv6-1127ee after having upgraded to windows 7 ultimate

  I upgrade my windows vista to windows 7. Everything went well but I can't access the internet wireless or cable. I try manything as IP reset or uninstall the driver. Also install the updated hp website driver. I tried safe mode and connection! What should I do?

  Hello

  If it connects in safemode, then it could happen due to the software antivirus installed on the computer.

  First try to connect again by turning off the antivirus or any security software installed on the computer or perform a clean boot >

  If it works then uninstall - reinstall the security software and update.

• TS-l663b cd/dvd "device cannot start code 10" after uppgrade from vista to windows 7 home

  Compaq CQ60-216DX

  Hi, I've updated from Vista to Windows 7 Home, and now the CD player is missing and displays an error code "10" DEVICE cannot NOT START, under Device Manager.

  Looked for the drivers updated on the HP Support, there is none for CD player.

  Cannot back driver, grayed out.

  Restore opportunity to go back 2 months and still no progress. Installed software recently withdrawn from the HP (C5280) printer as well.

  Immediately after the upgrade, the CD player worked fine. Same load of music in iTunes.

  I am at a loss. Any ideas?

  Thank you

  Fabe

  Paul, thanks for the quick response!

  Although the tool automated fix - It did not tour, the link you provided, was told in the right direction.

  http://support.Microsoft.com/kb/314060#win7fix

  It seems that it is a well known problem of incompatibility between the TS-L663B with the Windows 7 upgrade.

  I just had to read the Let Me Fix It Myself solution because that relates to Windows7 and change the registry.

  Thanks again,

  Problem SOLVED!

• Backgound App should start after the device to start

  Currently, I made soft to work by clicking on it, now I want to do as a background

  Problem:

  (1) I want my app to start after starting the device is finished.

  Personally, I don't like the method of 'sleep' suggests BBDeveloper, and which is also in a KB article.

  Search the knowledge base for this and the reason why you may need to use alternatives.

  I'd rather have a listener and use the method of power if the unit is start-up.

  If this issue is related to a Thread of yours that I have already commented on, there is no need for you to worry if you are inStartUp or not - your background code will run OK.

• Computer shipped with cd burner. When I go to burn a cd, it says to connect the burner. In the properties of the device, it says this device cannot start (code 10)

  Cannot read cd of either.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• This device cannot start (Code 10) - referring to the CD-ROM/DVD-ROM internal drive.

  Since yesterday I get the message above regarding my internal CD on my Acer laptop drive.

  The PC is barely over a year old & the Cd-Rom works fine up until now.

  I recently moved from Windows Vista Home Premium to Windows 7 Professional (about 2 weeks ago) and the CD-Rom drive has been used successfully to restore all my backup files that W7 is a new installation (not an upgrade).

  I removed the CD-Rom drive (a device slimtype DVD ADS8A2S Philips - Lite-on according to its label) and have re-connected it, but it still does not work.

  Windows seems to see the device when I say add a device, but when he tries automatically configer it I get the message "there is a problem with the driver for Slimtype DVD A DS8A2S ATA Device. "Reinstall the driver may resolve this problem" and gives me the ability to "Apply patch" or "jump the fix. When I choose "Apply patch" I finally get the message "device driver software not properly installed" - Please consult the manufacturer of your device to help... »

  Someone at - it ideas why all of a sudden I get a problem with my CD, I can not restore to any previous backups that I need a CD-Rom drive to do? In the meantime, I'll do a search in the site of compatibility of Windows to see if I can find a match for my camera and what he said about it.

  PS. the only thing different (new) I did just before I lost my CD-Rom has been thast I had linked to a conversion cassette tape via a USB device that my wife wanted some songs from an old tape of copy on CD. Tape copied OK and was transferred to the software iTunes on the PC, but when I said that I wanted to "Burn" the selection in College, I noticed that my CD-Rom (player 'E') show is no longer on my PC configuration, only on disks hard "C" and "D". If this has an impact on my problem, I don't know - it could just have been a co-fact?

  The following MS KB article may help:

  http://support.Microsoft.com/kb/982116

  Try the auto fix (Mats - Run.dvd.exe) and if that doesn't work try following the steps for Windows Vista, which should also work for Windows 7.

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Microsoft isatap adapter, get the message "this device cannot start code 10".

  have you tried the driver from the web and update manually update but it States driver is up to date?

  Hi"

  "Description of errors related to the 10 Code that generates the Device Manager in Windows on computers"

  http://support.Microsoft.com/kb/943104

  But it's the information from Microsoft Isatap adapter:

  "On a Windows Vista-based computer or on a computer Windows Server 2008, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message"

  http://support.Microsoft.com/kb/932520

  See you soon.

• The ipod device cannot start (Code 10) how can I fix this problem

  I CONNECT the IPOD VIA THE port USB PORT WONT SOFTWARE INSTALLED on THE PORTABLE JUST FLASHING RED CIRCLE

  Your best help is most likely on www.apple.com for a support.  You have installed iTunes before trying to connect to the iPod?

  Please note that typing in all capitals is difficult to read and is seen on the internet as scream.

• No sound in the pc. (realtech HD audio, this device cannot start code 10) audio driver package-kb835221.

  in Add / Remove Programs, I got 2 programs of driver high definition audio I removed one and still does not

  Delete the other, a re-boot and re-install.

  See you soon,.

  Jerry