After windows update today, my computer is SLOOOOW to initialize and pages will load hnot, guard haveng reload

Similar Questions

• Cannot connect to internet after Windows update. With the help of windows 7 on a brand new computer

  Just got a new laptop last week... The internet worked right out of the box... Now last night I let windows do a big update, and now my internet does not work...  It says something about "connects to the DNS servers.

  So I did a system restore to an earlier time, and the internet works fine...

  which ____ should I do?

  Hi 31aboy,
   
  Welcome to the Microsoft Answers community.
   
  Try to install the update to windows in clean boot mode.

  To enter the mode of clean boot on your computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
   
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. now run windows update.

  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.
   
  If you are facing the same problem even after installing the update in clean boot mode, then check the update in windows update history and send me the update name.
   
  Steps to view the windows update history:
   
  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. in the left pane, click view update history.
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Computer does not start after Windows update

  I built my computer in December last year, which makes it less than a year. It has worked fine until this last week when I decided to give a few necessary windows updates a lot. I decided to download and install all night, and now it does not start. I get nothing on the screen. I don't get the safe mode options. I didn't get last known good configuration options. I don't not even a splash screen. After a full minute, it turns off again, regardless of how many times I turn it back on. It happened for a few days. Are no external hard drives not connected; only an intern. The only devices I plugged are my keyboard and mouse. Can anyone offer a solution? Whatever happened to you?

  I am running Windows 7 Ultimate Edition.

  The first time I tried to start after downloading the updates, he went to the boot screen windows 7 usual, that clear blue that says it configures windows and not turn off the computer during the process. Before we were told: "Welcome to Windows," he said "Shutting Down", but not before the configuration of progress has reached 100%. At this time, everything seemed normal. After the computer turns.

  Hello

  To fix your problem, you can follow the steps on this link. You can perform troubleshooting listed on this site by clicking here. The listed on these links troubleshooting steps are applicable to Windows 7 and more.

  Let us know how it goes.

  Best regards

• Cannot open disk by double-clicking after Windows update

  Cannot open the drives by double clicking

  I use windows 7 and after that windows update today (KB2454826 and KB2419640), impossible to open the drives by clicking twice. However, I can open the discs in a right-click then click "open in a new window.

  I did a full scan.

  Hi Oxbis,
   
      
  1. what happens when you double-click on the HARD drive?

  I suggest you to install the updates one by one on your computer in a clean boot state, and check if the problem reappears.

  Download and save the Setup on your desktop package and try to install the same one by one and check what update is causing the problem.

  To do this, you must enter the number of the Windows Update in the search field in the link provided below.

  Link Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Refer to KB2454826:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=ddafd2cb-022c-4235-a644-426ae6b6d36f

  Refer to KB2419640:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=3dfd4f1c-e7a5-4686-8d2c-b7a5a53c5333

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance.

  * Original title: System Restore

  Windows 7 Home Premium

  Dell XPS L502X

  Intel Core i7-2670QM CPU @ 2.20 GHz

  8 GB RAM

  After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance. The video freezes for a split second. I tried system restore several times, but my computer could not be restored to several dates I've tried. If I do not solve the problem today, tomorrow morning I'll try an advanced recovery method. I have a Windows 7-64 bits of the operating system at the same time, graphics cards Intel and Nividea. I had this same problem several times since I got the computer (Dell). Dell has replaced some hardware. Previously, he was my Western Digital external hard drive software that caused the problem. After that I deleted the software from the computer, the problem has been resolved.

  Does anyone have any ideas on how I could get the system restore to work? Or another suggestion that might help solve the problem?

  Thank you

  Joe

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________________

  And some information for you about Windows updates:

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• No Internet after windows updated August 18.

  No Internet after windows updated on August 18, to return from vacation.

  System Restore to 8 August which worked yesterday and restored internet, but when you sign in today update windows automatically installed and once again no internet no access. Computer won't let me restore of the system now well I tried different dates - said the system restore could not replace the file (c: Windows) with the original copy of the restore point - an unspecified error has occurred in 0x80071a90.  Still no internet access.  Any ideas please?

  The KB2705219 update could be the cause and uninstall that solved the problem for some users.

  But...

  In another thread [my computer today installed windows 7 updates, but my internet has been lost.] But the network is visible. [what caused this?] a user has identified this notice - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  While it remains the case that uninstall Win7 KB2705219 solved the problem for at least two users update, you might want to consider the McAfee fix, as appropriate. At least two users also reported having removed then reinstalled McAfee and their systems were back up & working properly afterwards.

  I have McAfee, but the connection has started working again on its own so I thought I was clear of problems.  However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually.  So stick with McAfee without following their abduction - Reinstall procedure would have upgraded my PC at risk by not updated.  Actually, I removed and then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].  My home network has survived without any new replacement set - firewall Windows just took the right settings without any complaint.

  I had to run the MCPRT deletion a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• Good question after Windows update on Satellite P100 PSPA3E

  I encountered a problem with my sound card after a Windows Update. It became an old analog tuner with problems of dust on his volume knob. (this is a reference "sounds like" for those old enough to remember) I updated the driver to the most recent DriverGuide.com, no joy.

  I even did a complete system restore "with the"product restore disk."" Which fixed the problem until Windows updated the right files for trash again. I don't know what files do the dirty on my card since most of the windows system updates are performed while I "continue to work! Anyone with ideas?

  Thank you

  JD

  Hello

  What operating system do you use? XP or Vista?

  Satellite P100 PSPA3E must use a sound chip Intel high definition audio Conexant CX20551-22.

  I recommend to remove the sound card in Device Manager after installing Windows updates.
  Then restart the computer and install the latest audio drivers available that support the sound chip HD Conexant CX20551-22.

  First of all, you should try to use the driver for the Toshiba page. If this does not work, check the Intel page!
  Please don t forget to restart the laptop after windows update finished.

  Best regrads

• "limited connectivity" on after windows update wireless router.

  Original title: "limited connectivity" on after windows update wireless router. happens all the time after soundcards implemented to date. I then 'restore' on the eve of going online. Why?

  I have... 'limited connectivity' icon wireless router in the toolbar after windows updates. happens all the time after windows updates. I then 'restore' on the eve of going online. Why?

  Hello
   
  What operating system do you use?
   
   
  Method 1:
  Check the update has been installed and make a note of this update.
  To check, follow these steps:
  a. Click Start, in the search box, type in update
  b. click on windows Update
  c. click view update history
  Note: If this isn't a significant update, you can hide the update.
  To hide an update, follow these steps:
  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
  b. do one of the following:
  o click the link that tells you important updates are available if you have some updates to hide.
  o click the link that tells you optional updates are available if you have optional updates to hide.
  c. Select hide any update you want to hide, right-click and then click on update. Do this for each update you want to hide.
  d. click OK.
  
  If it an important update then you can try the following method 2:
  
  Method 2:
  Download the update of the article mentioned below (enter the number of the update in the search), put the computer to boot and then install the update and check if that helps:
  Download here: http://www.microsoft.com/download/en/default.aspx
  Clean boot: here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• Cannot connect to internet after Windows Update

  I was not able to connect to the internet after windows updates 7 of 14 October 2010, unless I have to restore the system to October 13.

  Hi jlm00926,

  ·        Update that you installed before the problem?

  ·        Are you able to connect to the internet properly now?

  You can set up your computer in a clean boot state. Subsequently, download & install the update manually from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Clean boot will start Windows 7 by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7: http://support.microsoft.com/kb/929135

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems after Windows Update on Vista wireless

  It seems that other people have a similar problem, but I'll post this new...
  I've been running Windows Vista Ultimate on my Toshiba laptop for years without any problems.  Earlier this year, I started seeing issues after Windows updates.  The main problem is that after updates Windows, my wireless network is is more noticed and the wireless card (which was installed on the computer, and never had problems before) is not recognized.  I manually installed updated drivers with no luck.  The only thing that has worked is to do a system restore to a point before the updates.  The problem seems to be related to an update in general, I can't uninstall.

  I find it extremely ironic that I have no problems with Vista until Windows 7 is launched. First of all, it's the wireless card, then a problem with a driver graphics card (apparently... which seems to be fixed now) and return to the wireless card.  Should I expect to continue to have problems unless I upgrade to Windows 7?  I can't continue to spend half of my day trying to fix my computer after an update that is supposed to fix the errors, but I don't like the feeling that I am forced to upgrade.

  Hi dabaum77,

  From your post, it seems that the issue was occurring when Windows updates are installed automatically again even after the restoration of the system and that is why I suggest to restore the system again to a point before the updates and download and install Windows updates manually.

   

  Access the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Follow these steps to disable the automatic updates:

   

  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. in the left pane, click on change settings.

  3. under important updates, choose the option you want.

  4. under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click OK. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  
  Install the updates one by one and check the update is causing the problem to occur. If the problem persists due to a particular update, repeat the process and refrain from settling the problem causing the update to.

  
  You can also check the update problem in Windows Update history.

   

  Follow the steps to check which day caused the issue:
   
  1. open the control panel (all items view), and click the Windows Update icon.
     
  2. click on the link to view update history.
    
  3. to view the details of a single Windows Update-
  (A) select and right-click on a Windows Update list, and then click details.
  
  (B) click on close when finished.
   
   
  You can also uninstall the update that is causing the problem to occur, although it is not recommended.
   
  1. to uninstall a Windows Update, you must go to programs and features. There are several ways to find it. One of the simplest is to use the search box on the start menu.
   

  

  2. in the programs and features, click the link updates installed.
   

  

   
  3. after a few seconds, Windows Vista will load the list of installed updates. Scroll down the page until you find the update you want to delete, select it with the mouse and then click on uninstall.
   

  

   
  4. Windows Vista will ask you to confirm that you want to uninstall the update you selected. Click Yes and the uninstall process will begin.
   

  

   
  5 depending on the size of the update, the uninstall process may take from several seconds to several minutes.
   

  

  
  6. wait for the window above will disappear and, if necessary, restart your PC. The update is now deleted.
   
  
  Aziz Nadeem - Microsoft Support

• Monitor the issue after Windows update

  I installed the Windows updates today, and after installing and restarting, the saturation of the color on my monitor is out of line. There is intense color saturation and it made all my files photo as well.

  Running windows 7 and a HP w2338h monitor.

  Thanks for any help on this

  fifthboss,
  You should look through the updates installed to see if there was an update to the video card.  I would then check with the manufacturer of your video card for the latest driver.  If you just updated to the most recent and feel it affected the color then you can restore the previous driver.  Then you can contact the manufacturer of the video card on the driver and they know the issue and see if they are still aware and have a fix. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After Windows Update: Start, taskbar, toolbar, tools, etc., have disappeared. Disabled Task Manager, programs don't run, etc, etc.

  My multi-monitor desktop Win XP through a long Windows update yesterday. Starting this morning, button bar and try to start at the bottom of the screen are no longer present. My table of multi-monitor configuration has changed radically in view/settings. All the tabs on the Task Manager are missing - with the exception of the processes tab. All keyboard and mouse commands have been disabled. To restart, I had to unplug the computer from power. Restart twice again obtained the same results. As there was no apparent way to start programs and features in Windows (Control Panel, Windows Explorer, Manager tasks, etc.) I resorted to a Safe Mode system restore after snatching the lead for the third time.

  It seems that a system restore is the only cure for this, and I started this operation. Updates of various sellers require me to use to restore the system several times each month.  I learned to fear the automatic updates for fear that they will cost hours and days of recovery since the "cure" for other ailments that are not obvious to me. The last update all deleted antivirus controls volume and their icons. I have still not got their back. But I digress...
  My questions:
  What I've done wrong?
  Should I disable updates?
  How can I make sure that the updates stop disabling my computer?
  What are your recommendations to repair the damage?
  Thank you.
  Craig Olsson

  email deleted

  Hi Craig,.

  Follow these steps and check if the problem persists.

  Step 1:

  I would say you turn off the automatic updates (not recommended however) and install the updates manually ensuring that you will refrain from any installation problem causing updates unless it says "important updates.

  a. log in Windows XP to your administrator account. Click 'Start', then right-click "My computer" and select "Properties".
  b. Select the "Automatic updates" tab and then click on "Turn off automatic updates."
  c. click 'OK' to turn off the automatic updates.

  Step 2:

  You can also test the issue in a State of clean boot in safe mode (after installing updates).

  Note: Don't forget to restart your computer as usual.

• I am unable to do the windows updates. My computer States tries to install 1 of 25, but no progress.

  I am unable to do the windows updates. My computer trying to install updates, but is blocked to install 1 of 25 updates.

  What should I do now?

  Thank you very much. I solved the problem using Fixit after a suggestion of TaurArian.

  Also, he told me how to not to receive other suggestions.

  Thank you for your help.

  Susan J.

• Unable to start - blue screen after Windows update

  original title; on dell dimension C521... blue screen after Windows update last night 3/9...3:00am...running Vista

  Can not even go in safe mode

  Hello

  try to do a startup repair or a system restore before the update using the Startup Repair disk if you don't have a vista dvd microsoft

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  If you can make the above change how you receive updates to find the update problem

  When right-clicking on it UAC prompt you hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Choose one of these settings:

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Failed to open the Works document after Windows Update

  Original title: failed to open the works document, after a month of update.__9 of configuration of microsoft of 350 pages. Help!

  no change...

  Hi SILLIVEN,.

  1. what exactly happens when you open the works document?
  2. do you get an error message?

  Try these steps and check the result.
  Step 1: Update remove recently installed
  a. see remove an update
  b. Once you have removed the update, restart the computer.
  c. open work document and check if the problem persists.

  Step 2: If the problem does not persist after the removal of the update, try to install updates on hold by turning off all non-Microsoft programs and check the result. To do this, try the following steps:
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. install the updates. See the updates Windows Installer
  d. Once you have installed the updates, the article, follow "step 7: reset the computer to start as usual.
  e. check if the problem persists.

  For further assistance on Microsoft Works, please post your request here: http://www.microsoft.com/products/works/support.mspx

  Visit our Microsoft answers feedback Forum and let us know what you think.