After XP eol will update Windows 7 DVD any good?
Don't you think that Windows 7 upgrade DVD will become worthless next year when XP is eol (End of LIfe)? I wonder if I will still be able to install Windows 7 should I need to do a clean install, but I only have Windows 7 upgrade DVD, so I always install XP first.
My Microsoft contact indicates your product key XP will still be able to activate windows XP after April 8, 2014. This means that you can reinstall XP and use it as a base for the upgrade to a newer version of Windows (Vista, Windows 7 or 8).
J W Stuart: http://www.pagestart.com
Tags: Windows
Similar Questions
-
After 24 of Firefox update, Windows 7 breaks after the reboot. The network in the taskbar icon is not ready (blue circle on the wireless network icon). But I can't do much. I can't open the network and sharing Center (never opened). Even the Task Manager hangs when I click to show processes from all users. I have to do a system restore for a network working again. I never even launched Firefox.
Wow... I finally have the solution. Windows updates have been applied at the same time I updated Firefox. Bluetooth driver is what broke (which is part of the Centrino wireless). I ended up installing the latest driver from Intel, Windows Update, and then update Firefox... and all is well.
I thank very you much for all your help. Take care.
-
WiFi connection on c4580 fails after the automatic vista update windows.
Hello
There is a month my c4580 perfectly work on WiFi stoped working
the reson seem to be updated auto matic windows, if I do a system restore the functions of the printer again, but a few days later, the connection went after an auto matic update
to remedy this, I tried the following
Following the recommendations of HP
removed the Hp software and then try to install the drivers again after the download from their website form HP
tried to install all updates firmware of HP
tried to install without Firewall (bullguard)
installed the latest firmware on my Linksys wifi router
But still no luck
the printer works perfectly on USB, but if I try to put it on wifi with the installation software stops
It goes well until after I give my network key, and then it opens the network and communicates for a wile
the last audit it does is trieng to connect to an IP address, then it stops telling me to fix the connection with the printer
and the hp software is not responding so I have to restart my computer...
I have no idea of what I can try again
Help!
Thank you
Niels
If you have the original CD, it get a L3 uninstall program and run that. It will remove completely from your software.
Reinstall the software from hp.com.
-
WIndows, internet Explorer does not not after the attempt to update windows
Windows stops responding and lights that shows cpu works doesn't Flash at all.
Whenever I try to use windows update, my computer crashes while updating. I stopped to automatic update for some time and windows was working fine, 2 days ago I try to update manually, it blocks. now, the computer runs very slowly and each time I use internet explorer, my computer crashes. I tried to use system restore to restore the computer to the date before I use window update, but nothing helped. my computer crashes around 5 minutes after it is on.Hello
Updates are closely related to IE.
Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
role in this issue. And even the TCP/IP stack might need to be refreshed.What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).If no joy there's something blocking perhaps.
Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?
IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK
IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK
Close and restart IE or IE with no addons
not better?
IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
"(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
are bad, but some can cause your question (toolbars are BHO).
http://securityxploded.com/bhoremover.phpStartup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAlso get Malwarebytes - free - use as scanner only.
--------------------------------
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html--------------------
Departure - in the search box, type-> order
at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN
Type the following commands (or copy and paste one at a time), each followed by pressing on enter.
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
RESET
That resets your TCP/IP stack
--------------------------------
Maybe need of these:
For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx==========================================
After all above follow these steps:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
When I restore vista to the factory settings, what updates to this what I need to do? I just install sp1 & 2? My computor is 5 years, so a lot of updates are needed.
Hello
You will NOT be offered SP1 via Windows Updates as Support for Vista without SP1 is finished.
Click Start > right click computer > left click on properties > it will tell you it if you use Vista 32 bit or 64 bit Vista.
You need this information to make a direct download the correct version of 'bit' of SP1.
Once you have select the SP1 correct 'bit' download from these links:
Vista SP1 32-bit (x 86): http://www.microsoft.com/download/en/details.aspx?id=30
Vista SP1 64-bit: http://www.microsoft.com/download/en/details.aspx?id=21299
After you download and install SP1 in this way, you should be able to use Windows Update to get the rest necessary updates, including SP2.
See you soon.
-
I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone. iTunes sees it yet, but windows Explorer does not work. It seems that some setting has been broken through the update of ios. A way to solve this problem?
Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?
TT2
-
Intel WiDi does not work after the installation of update Windows 10 anniversary. X 1 yoga
I get a message Notification of Windows ' cannot run this application on this PC: Intel WIDI software display does not work on this version of Windows. "
This message appeared after the upgrade to Windows 10 anniversary.
Indothai,
Microsoft to Intel Widi support was eliminated in 10 Windows. WIDI has been replaced by an application called Miracast. If you try to run an application depends on Widi, you may need to upgrade the application or to find a new use.
For more information, see this Intel review: https://communities.intel.com/docs/DOC-111153
Thank you
-
After that the latest updated Windows updated my audio playback jumps (video or audio)
Since the last update of Windows has been installed any audio file jumps. The problem occurs with videos, as well as when I play music from a file or through Pandora. Any ideas?
UPDATE: the problem occurs with all forms of audio files. I tried to play clips of different stakeholders, Web sites (Pandora, YouTube, Yahoo news clips, etc.) and all with the same result. The audio file or the music jumps every 30 seconds or so... any ideas on what I should try next?
Hello
I suggest you to check if the problem persists with Windows media player. If the problem occurs even with Windows media player, I suggest you try the steps from the following link:
Tips for solving common audio problems (by my speakers is crackling or distorted).
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problemsIf the problem is with a Pandora software, then I suggest you to contact Pandora support.
-
Windows Update does not work I get no Khvan my router but can connect to the internet
If you still experience the problem of origin after all these steps, you can proceed with your plan to repair or formatting of your system. You will need Windows Setup DVD to repair. Once again, the steps proposed by Martin is composed with graphics, it should help in the realization of this task.
However, if your goal is to make a new installation, you can either use the recovery partition on your system (usually drive D :) or the CD/DVD provided with your PC to install your PC back to factory settings. Depending on the brand of your PC, there are a combination of keys on your keyboard, you will need to press when your computer to restart to activate this recovery option. Also, using the Vista DVD of Installation, you can choose to do a new install instead of repairs. Just keep in mind, you need to reinstall some of the drivers for the devices on your system.
David O
Microsoft Answers Support Engineer
Visit our and tell us what you think. -
can't see the Dvd rom after the Update window window 10 7
can't see the DVD rom after the Update window 10 window 7.
Hi Michael,
Thanks for posting your query in Microsoft Community.
We would be happy to help you with the problem you are facing today. I understand the difficulty that is the problem, and I suggest you follow the methods below:
Method 1: Run the troubleshooter of material and check.
Follow the steps to run the Troubleshooter:
a. type Troubleshooting in the search bar and click on it.
b. click hardware and sound.
c. click on Windows Media Player DVD and follow the instructions.Method 2: Uninstall, reinstall the drivers CD/DVD.
a. press the Windows key + X , and then click Device Manager
b. expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.
c. When you are prompted to confirm that you want to remove the device, click OK.
d. restart the computer.
e. After you restart the computer, the drivers will be installed automatically.Method 3: Download/install the driver CD-ROM/DVD-ROM from the computer manufacturer's support Web site.
Visit the computer manufacturer's support Web site and install the latest driver CD-ROM/DVD-ROM and check.
Hope it will be useful. Incase if you still have any other queries please respond with more details and we will be happy to help you.
-
After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10
Have you tried these steps? If iTunes does not your iPad, iPhone or iPod - Apple Support
-
All-in-one HP OfficeJet J4680: Solution HP will not launch after recent updates Windows 10
HP Solution would not launch before 10 Windows updates have been downloaded. After the updates have been downloaded on 03/01/16, HP Solution launched and worked. 05/01/16, ddoes HP Solution, not throw again. I've read of other recent and clear solutions on what must be applied to resolve this problem.
Try to uninstall this update until Microsoft comes up with a fix.
Security Update for Internet Explorer in the drive for the Windows Version 10 1511 (KB3132372)
How hide/block updates to Windows in Windows
December 28, 2015, Adobe released a security update for Adobe Flash Player fix that they call "critical vulnerabilities" that allow an attacker to take control of the system concerned. Microsoft has published notice 2755801 of security and updating of security KB3132372 to make the Adobe Flash Player update available to all users.
Adobe and Microsoft are aware of the reports of some application crashes after you install this update, conducting research on this problem. We will post more information in this thread in KB3132372 under the more information section.
REO
-
I had this problem for weeks and only recently someone told me that it is perhaps for this reason.
I tried several things to fix, and one of those who created an error where when I clicked on drive E in Windows Explorer, it looks like:E:\ application not found
So, in the end, I wiped my computer and everything on it and rebooted again.
IT TOOK FOUR HOURS.
So, I've set up the computer as I did when I got it 2 years ago, and everything was fine. I could insert a disc, it reads that and I was able to install my game, no problems.
Now, I have reset everything up, and there are more than 2000 updates to update installed. So I did.
SO NOW, after all this, which took another TWO HOURS - he does not all disks again.
I play the Sims 3 - fiercely - and so I tried to re - install all my expansion packs, but it does not now.
I DON'T want to make that whole process again and install all my games before updating Windows, because I believe, even if I did that, once I've updated, I can't play the game, because my laptop does not recognize that the game disc is there.
Help, please.
I spent so much money on these games, and I love them! I don't have the money to buy a new computer.
I have a Lenovo Ideapad
Core i5 Intel
https://support.Microsoft.com/en-AU/KB/314060/en-us
Your CD-ROM or DVD drive is not recognized by Windows or other programs
Discussion here:
Your AutoPlay doesn't work maybe not properly.
-
After you apply this update, the system starts more (secure or normal) and gives the BSOD error above. Manual removal of the patch Recovery Console fix the BSOD using batch spuninst.txt in the patch folder. The affected system is an AMD Athlon 2400 + with 2 GB of RAM and XP SP3. All other updates installs successfully. I scanned viruses with Avast, Dr Web CureIt, ComboFix, Malwarebytes and TDSSKiller. The system seems to work fine without the update.
It seems to be a problem with the Win32k.sys file in the patch, but I ran out of utilities to solve this problem.
Hello
The solution is to report the problem, so the update can be set to not to do so. Microsoft
may already be a fix, or work on it, or it could be a new problem. He
There's even a phone number to make it easier.Certainly keep good backups that there could be an underlying hard disk or hardware
issue.========================================================
Here is the solution for the coooo21A except use it when you can just get the fixed update
is not the method I want to use.STOP: 0XC000021A
Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
(not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.Cause
This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.
Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.
Solve the problem
Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.
Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.
If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the WindowsAdvanced Options menu that results, select thelast known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.
Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.
Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.
STOP: 0XC000021A<-- read="">-->
* 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not try to repair it, you can borrow a friends because they are not protected against copying. You can also buy the physical disks
good system machine cheap that you already own Windows (you have to reinstall them if)
required). You can also repair disks on another computer.Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during "blue screen of death," collisions
Displays information on all the "crash" of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Hello
Welcome to the community of Windows Vista answers.
First of all, we will try if we can start in safe mode.
Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.
Steps to start your computer in safe mode with networking
1. to start mode safe mode with networking, restart the computer and press the F8 key for about four to five times. You will see "Safe Mode with network" listed in the advanced options of Windows.2. Select "Safe Mode with network" and then press ENTER.
Access the link below for more information on how to start in "Safe Mode with Networking":
http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspxThe system restore.
http://support.Microsoft.com/kb/936212Method 1:
The restore of the system of Windows Recovery Environment (WinRE)(a) Insert Vista DVD and boot from the DVD.
(b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.
(c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.
(d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box
(e) select the Vista installation you want to repair.
(f) in the system recovery options, click on system restore to restore the system.
Method 2:
Run the disk check Windows recovery environment to correct the bad sector on your hard drive
(a) Insert Vista DVD and boot from the DVD.
(b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.
(c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.
(d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box
(e) select the Vista installation you want to repair
(f) in the system recovery options, select command line and enter the command chkdsk/r.
For the above two steps, you can see the link below.
http://windowshelp.Microsoft.com/Windows/en-us/help/95b4c03a-ac42-49a4-a90d-8f3736a995271033.mspxOnce you perform the restoration of the system, download the updates and install them manually one by one, this should help you knowing what update causes this problem.
Concerning
Amrihta.
Maybe you are looking for
-
I'm not able to run windows update. [Error number: 0 x 80244019]
I'm not able to run windows update. I get an error: [error number: 0 x 80244019] I took and I tried all the suggestions on the support for windows Xp article because that's what I'm running [error number: 0x8DDD0010] "When you click on a link, you se
-
This is a computer that I use for business - so it is essential that I have copies of the stuff I send. Any suggestions will be appreciated.
-
How can I restore my icon on my taskbar volume control? He disappeared.
I have a Toshiba laptop with windows Vista as the operating system. Recently, my volume control icon disappeared from my taskbar. How can I restore it?
-
I need a hard drive for HP Pavilion dv2620us and perhaps new OS disk I can't get my recovery disk to work, I test a hard drive and it failed. I had vista can it be upgraded to 7? Why is it so difficult to find what you need on this site. I've been go
-
a strange problem on quite demand. Pls help me. Thank you very much
public class Searchbox extends Manager { private Bitmap searchbarBitmap; private int searchbarheight; private int searchbarwidth; public Searchbox() { super(NO_VERTICAL_SCROLL); if(Display.getHeight()